(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- inCAD Library Home
- > No.000034 Vertical Transfer Unit
No.000034 Vertical Transfer Unit
64
64
Vertical transfer of workpiece using single axis actuator
Relevant category
Single axis robot Slider type
| Product name | Single Axis Robot RSH3 |
|---|---|
| Part number | RSH310-C21A-N-F1-3-500 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Linear motion unit that satisfies load capacity, stroke, and motion speed requirements.
Risk info.
Disconnection
Available sizes
Single axis robot (RSH3, Slider type)
General specifications
| Ball screw | Motor | Position detector | Operating atmosphere temp. ・ humidity | Controller power input |
|---|---|---|---|---|
| φ15 (C7 Rolled) | AC Servo motor 100W | Resolver | 0?40℃・35?85%RH (No condensation) | AC100-115V AC200-230V |
Basic specifications
| Lead (mm) | Stroke (mm) |
|---|---|
| 5 | 150-1050 (50Increment) |
| 10 | |
| 20 |
Dimensions ・ Mass
| Dimensions ・ Mass | Stroke | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | |
| Overall length | 518 | 568 | 618 | 668 | 718 | 768 | 818 | 868 | 918 | 968 |
| Mass(kg) | 4.7 | 5 | 5.3 | 5.6 | 5.9 | 6.2 | 6.6 | 6.9 | 7.2 | 7.5 |
| Dimensions ・ Mass | Stroke | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | |
| Overall length | 1018 | 1068 | 1118 | 1168 | 1218 | 1268 | 1318 | 1368 | 1418 |
| Mass(kg) | 7.8 | 8.1 | 8.4 | 8.7 | 9 | 9.3 | 9.7 | 10 | 10.3 |
Selection steps
Single axis robot selection steps
Load capacity
↓
Stroke
↓
Cycle time or Max. Speed
↓
Detail confirmation
Accuracy Info
Accuracy of Single Axis Robot
Repeatability: ±0.01mm
Performance info.
Basic specifications
| Lead (mm) | Max. load capacity | Rated force (N) | Max. speed (mm/sec) | Rated Life |
|---|---|---|---|---|
| Horizontal (kg) | ||||
| 5 | 80 | 339 | 300-105 | 10,000km or more |
| 10 | 60 | 169 | 600-210 | |
| 20 | 30 | 84 | 1200-420 |
Max. speed(mm/sec)
| Lead (mm) | Stroke | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 150-600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | |
| 5 | 300 | 255 | 225 | 195 | 180 | 165 | 150 | 135 | 120 | 105 |
| 10 | 600 | 510 | 450 | 390 | 360 | 330 | 300 | 270 | 240 | 210 |
| 20 | 1200 | 1020 | 900 | 780 | 720 | 660 | 600 | 540 | 480 | 420 |
Technical information
Convenient sizing software is available to use.
Linear guide
| Product name | Linear Guides - Heavy Load |
|---|---|
| Part number | SX2R28-760 |
| Features | Compliant with the industry standard specifications. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable for linear guidance and as a load support.
Available sizes
Linear guide (For heavy loads ・ Normal clearance, Standard grade ・ 2 blocks ・ Standard blocks)
| Material | Hardness | Overall height | Rail length |
|---|---|---|---|
| Carbon steel (SCM etc. alloy steel) | 58HRC～ | 24 | 160-1480 |
| 28 | 220-1960 | ||
| 33 | 220-1960 |
Selection steps
Linear guide selection steps
- Determine application conditions
- (Mass of moving body, Feed rate, Motion pattern, Life)
↓
- Interim selection of linear guide specifications
- (Temporarily select block type, height,
rail length based on the application condition)
↓
- Confirm basic safety
-
- ● Load capacity
- ● Life
- ● Preload
Accuracy Info
Preload and accuracy standards
(μm）
| Tolerance of H | ±100 | |
|---|---|---|
| Pair variation of H | 20 | |
| Tolerance of W2 | ±100 | |
| Pair variation of W2 | H24・28 | 20 |
| H33 | 30 | |
(μm）
| Rail length | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| -250 | 251-400 | 401-500 | 501-630 | 631-800 | 801-1000 | 1001-1250 | 1251-1600 | 1601-2000 | |
| Running parallelism | 7 | 12 | 14 | 18 | 21 | 23 | 25 | 27 | 28.5 |
Performance info.
Linear guide load rating (For heavy loads ・ Normal clearance ・ Standard grade)
| Overall height | Basic load rating | Allowable static moment | ||
|---|---|---|---|---|
| C (Dynamic) kN | C0 (Static) kN | MA・MB N・m | Mc N・m | |
| 24 | 8.6 | 14.2 | 69 | 98 |
| 28 | 12.5 | 21.3 | 155 | 232 |
| 33 | 20.2 | 34.5 | 275 | 393 |
Technical calculations
Linear guide life calculations
- ●Life
- When linear guides operate in linear motion while supporting loads, repeated stresses apply on the rolling elements (balls) and raceways (rails), eventually causing scale-like flaking due to material fatigue. The total run distance until this flaking appears is defined as linear guide's "Life".
- ●Rated life
- Rated life is a total distance 90% of linear guides reach without flaking when a group of the same guides are run under the same condition. The rated life can be calculated with basic dynamic load rating and the load applied on the guides as follows.
-
- When using linear guides, load calculations are initially needed. It is not easy to calculate the loads during linear motion due to vibrations and shocks, as well as load distribution on the guides. Furthermore, operating environment temperature has large effect on life. When these conditions are taken in consideration, the calculations would be as follows.
-
- L: Rated life (km)
- fH: Hardness factor (see Fig-1)
- fT: Temperature factor (see Fig-2)
- fC: Contact factor (see Table-1)
- fW: Load factor (see Table-2)
- C: Basic dynamic load rating (N)
- P: Applicable load (N)
- Hardness factor (fH)
-
In using linear guides, the shaft that balls contact must have sufficient hardness, If adequate hardness cannot be obtained, load rating decreases and life will be reduced as a result.
Please compensate the life rating with hardness factor.
- Temperature factor (fT)
-
When the temperature of linear guides exceed 100℃, hardness of blocks and rails will be reduced, causing reduction of life. Please compensate the life rating with temperature factor.
* Please use linear guides within temperature shown on product pages.
- Contact factor (fC)
-
Table-1. Contact factor
Number of blocks installed on one rail and contact factor fC
1 1.00 2 0.81 3 0.72 4 0.66 5 0.61 In general, it is common to use 2 or more blocks on 1 rail. In such case, load applicable on each block would not be uniform due to machining variations. As the result, allowable load rating on each block would vary depending on the number of blocks used per rail. Please compensate the life rating with contact factor shown on Table-1.
- Load factor (fW)
-
Table-2. Load factor
Application condition fw No external shocks or vibrations and
speed is low 15m/min or less1.0-1.5 No significant shocks or vibration and
med. speed 60m/min or less1.5-20 External shocks and vibrations exist
and the speed is high 60m/min or over2.0-3.5 When calculating loads applicable on linear guides, other than the weight of the object, inertial force due to motion speeds, moment loads, and variations of each over time must also be obtained accurately. However, accurate calculation would be difficult due to repeated starts and stops and various shocks and vibrations. Therefore, the Load Factors shown in Table-2 are used to simplify the life calculations.
- Applicable load calculation method
- When moment loads apply a block, use the following formula to convert the moment load to applicable load.
-
- P: Applicable load (N)
- F: Downward load (N)
- C0: Static load rating (N)
- MA: Allowable static moment - Pitching direction (N・m)
- MC: Allowable static moment - Rolling direction (N・m)
- Lp: Load point distance (m) in pitching direction
- Lr: Load point distance (m) in rolling direction
Cam follower
| Product name | Cam Followers - Hex Hole, No Seal, Crown Type |
|---|---|
| Part number | CFUA12-30 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable for supporting linear transfer.
Available sizes
Cam follower (Crowned with a hex socket)
| Purpose | Main body | Nut | |||
|---|---|---|---|---|---|
| Material | Seal | Material | Surface treatment | ||
| No | Yes | ||||
| General | 52100 Bearing Steel | ○ | ○ | 1045 Carbon Steel | Black oxide |
| 440C Stainless Steel | ○ | ○ | 304 Stainless Steel | - | |
| Low particle generation | - | ○ | |||
| Heavy load | 52100 Bearing Steel | - | ○ | 1045 Carbon Steel | Black oxide |
| Stud DIA. | Thread | Outer race diameter | Outer race width | Overall length |
|---|---|---|---|---|
| φ8 | M8x1.25 | φ19 | 11 | 32 |
| φ10 | M10x1.25 | φ22 | 12 | 36 |
| φ26 | ||||
| φ12 | M12x1.5 | φ30 | 14 | 40 |
| φ32 | ||||
| φ16 | M16x1.5 | φ35 | 18 | 52 |
Accuracy Info
Cam follower accuracies
Stud diameter tolerance: h7
Outer ring DIA. Tolerance: 0/-0.05
Outer race DIA. Tolerance: 0/0.12
Performance info.
Cam follower reference data
| Stud DIA. -Outer race diameter | General | |||||
|---|---|---|---|---|---|---|
| Basic dynamic load rating C(kN) | Basic static load rating Cor(kN) | Max allowable load(kN) | Track load capacity (Crowned)(kN) | Rotational speed limit (rpm) | ||
| With Seal | Without Seal | |||||
| 8-19 | 4.17 | 4.65 | 4.73 | 1.37 | 14000 | 20000 |
| 10-22 | 5.33 | 6.78 | 5.81 | 1.67 | 11900 | 17000 |
| 10-26 | 2.06 | |||||
| 12-30 | 7.87 | 9.79 | 9.37 | 2.45 | 9800 | 14000 |
| 12-32 | 2.74 | |||||
| 16-35 | 12.00 | 18.30 | 17.30 | 3.14 | 7000 | 10000 |
| Stud DIA. -Outer race diameter | Heavy load | ||||
|---|---|---|---|---|---|
| Basic dynamic load rating C(kN) | Basic static load rating Cor(kN) | Max allowable Load(kN) | Track load capacity (Crowned)(kN) | Rotational speed limit (rpm) | |
| With Seal | |||||
| 8-19 | 8.13 | 11.20 | 4.73 | 1.37 | 3480 |
| 10-22 | 9.42 | 14.30 | 5.81 | 1.67 | 2880 |
| 10-26 | 2.06 | ||||
| 12-30 | 13.40 | 19.80 | 9.37 | 2.45 | 2320 |
| 12-32 | 2.74 | ||||
| 16-35 | 20.60 | 37.60 | 17.30 | 3.14 | 1800 |
IDEA NOTE Floating mechanism
The connection between robot and slide table is floating structure utilizing cam follower.
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- A workpiece is vertically elevated using a single axis actuator.
Target workpiece
- Plastic plate
W188 x D68 x t5
Design Specifications
Operating Conditions or Design Requirements
- External dimensions: W400 x L900 x (H593)
- Stroke(Left/Right)：500mm
- Stroke(Up/Down)：200mm
Required Performance
- Positioning accuracy
Left/Right: ±0.2/500 mm
Up/Down: ±0.2/200 mm
Selection Criteria for Main Components
- A single axis robot is used for multi-point positioning capability and a long stroke.
- A single axis robot is used since acceleration/deceleration and good positioning accuracy are needed.
Design Evaluation
Verification of main components
- Select a robot that satisfies load capacity, stroke, and motion speed requirements.
- Single axis robot selection calculations
- X axis robot
(1) Load capacity → Select from [Max load capacity] of Spec. List: 10kg (98N)
(2) Stroke → Select from [Stroke] of Spec. list: 500mm
(3) Cycle time → Select from [Cycle time graph] or [Max speed]: 1.2sec
Temporarily select RSH310-C21A-N-F1-3-500
(4) Detail confirmation
Overhang: 111mm allowable at 20kg, actual overhang 68mm.
Bending moment: 98N×0.068m=6.7N·m
Selected model's allowable moment is 163N·m, and is sufficient for this application. - Z axis robot
(1) Load capacity → Select from [Max load capacity] of Spec. List: 10kg (98N)
(2) Stroke → Select from [Stroke] of Spec. list: 200mm
(3) Max speed → Select from [Max speed] of spec. list: 80mm/sec
Temporarily select RSDG306B-C1-N-3-200
(4) Detail confirmation
Max push force: 10 x 9.8 = 98N, the max allowable push force is 550N, therefore selected robot satisfies load requirements.
- X axis robot
Other Design Consideration
- Ensure the aluminum extrusion frame has sufficient rigidity to provide the necessary weight capacity.
Explore Similar Application Examples
Page
-
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
