(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Quote /Order Báo giá /Đặt hàng
-
MISUMI App QR Code Click for More Details
- inCAD Library Home
- > No.000162 Grip and Rotate Feed Mechanism
No.000162 Grip and Rotate Feed Mechanism
37
37
Grip and feed motion with a single cylinder
Relevant category
Spring Anchors
| Product name | Spring Anchors - Wrench Flats, with Notch |
|---|---|
| Part number | SAIPOK8-30 |
| Features | Posts for Tension Springs with Notched Hole which facilitates hooking of the tension springs. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable for mounting the springs with swinging and tensile load
Available sizes
■Spring Anchors - Wrench Flats, with Notch
| Material | Surface Treatment | Accessory |
|---|---|---|
| 1045 Carbon Steel | Black Oxide | Nut one pc (JIS Class 1) SWCH Equivalent |
| 304 Stainless Steel | − | Nut one pc (JIS Class 1) 304 Stainless Steel |
■Sizes and Dimensions
| O.D. | Overall Length | Thread Section Length (overall length - shown below) | Screw Dia. (Coarse) | Spring Latch Hole DIa. | Notched Slot Width | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 15 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | |||||
| φ4 | ○ | ○ | ○ | ○ | - | - | - | - | 8.5 | Ｍ4 | φ1.5 | 1 |
| φ5 | ○ | ○ | ○ | ○ | ○ | - | - | - | 9 | Ｍ5 | φ2 | |
| φ6 | - | ○ | ○ | ○ | ○ | ○ | - | - | 10 | Ｍ6 | ||
| φ8 | - | - | ○ | ○ | ○ | ○ | ○ | ○ | 12 | Ｍ8 | φ3 | 1.5 |
| φ10 | - | - | - | ○ | ○ | ○ | ○ | ○ | 15 | Ｍ10 | φ4 | 2 |
| φ12 | - | - | - | - | ○ | ○ | ○ | ○ | 17 | Ｍ12 | φ5 | 2.5 |
Links
| Product name | Links - Both Ends Female Notch |
|---|---|
| Part number | LACG4-55-5 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable as an application for an economical completed product of the link mechanism parts
Available sizes
■Links - Both Ends Female Notch
| Material | 1018 Carbon Steel |
|---|
■Sizes and Dimensions
| Shaft Bore Dia. (Equal Dia.) | Shaft Bore Center Distance | Width | Thickness | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Inner dimensions | Outer dimensions | ||||||||
| 5 | 6 | 9 | 12 | 16 | 19 | ||||
| φ3 | 40〜100 | 20 | ○ | ○ | ○ | - | - | - | 20 |
| φ4 | |||||||||
| φ5 | 50〜100 | 25 | ○ | ○ | ○ | ○ | - | - | 25 |
| φ6 | |||||||||
| φ8 | 50〜120 | 28 | - | - | ○ | ○ | ○ | ○ | 28 |
| φ10 | |||||||||
| φ12 | 60〜120 | 32 | - | - | - | ○ | ○ | ○ | 32 |
| φ13 | |||||||||
| φ14 | |||||||||
| φ15 | |||||||||
* Please see the product pages for detailed dimensions.
Accuracy Info
■Accuracy of Links
Shaft Bore DIA. Tolerance: H7
Hinge Bases
| Product name | Hinge Bases - Standard / Miniature Type |
|---|---|
| Part number | HGHAM6-W6-H20 |
| Features | Hinge Bases with the width (A dim.) shortened. They can be used in limited spaces. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable for using as swinging parts of the cylinder
Available sizes
■Hinge Bases - Standard / Miniature Type
| Material | Surface Treatment |
|---|---|
| 1045 Carbon Steel | Black Oxide |
| Electroless Nickel Plating |
■Sizes and Dimensions
| Shaft Bore Dia. | Shaft Bore Length | Shaft Bore Height H | Overall Length | Overall Height | Width |
|---|---|---|---|---|---|
| 1 mm increments | |||||
| φ3 | 3〜6 | 11〜20 | 22 | H＋4.5 | 9 |
| φ4 | |||||
| φ5 | 4〜10 | 12〜25 | 25 | H＋6 | 12 |
| φ6 | 5〜10 | ||||
| φ8 | 6〜15 | 16〜30 | 32 | H＋8 | 16 |
| φ10 | 8〜15 | 16〜35 | |||
| φ12 | 18〜35 | H＋9.5 | 19 | ||
| φ13 | 12〜18 | 20〜35 | 38 | ||
| φ14 | 23〜35 | H＋12.5 | 25 | ||
| φ15 | |||||
| φ16 | |||||
| φ20 | 15〜25 | 27〜40 | 50 | H＋15 | 30 |
| φ25 | 20〜25 | 28〜45 | H＋16 | 32 | |
Accuracy Info
■Accuracy of Hinge Bases
Shaft Bore Dia. Tolerance: H7
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Purpose
- Feeding the workpiece after rotating 90°.
- Operation
- On the output side of the cylinder, the clamped workpiece is unclamped at the first return stroke after the swing arm tumbles hitting the stopper surface and comes to a halt. At the cylinder return side, the arm rises up in an unclamped condition, hits the stopper surface and comes to a halt. When the cylinder moves again toward the output side, the workpiece is clamped at the beginning of the stroke.
Target workpiece
- Shape: Small-size battery case
- Size: W 22 x L 45 x H 10 mm
- Weight: 0.03 kg
Design Specifications
Operating Conditions or Design Requirements
- Grips the workpiece after receiving it.
- Rotation: 90°
- Work head drop: 100 mm
Required Performance
- Locating accuracy: ± 1 mm
Selection Criteria for Main Components
- Cylinder
- Small-size, double-acting
- Tension spring
- Auxiliary part for initially performing the clamp motion/Retaining workpieces during revolution motion .
Spring constant k = 0.22 N/mm
Spring tensile length l = 11.7 mm
Workpiece retaining force = k x l = 2.57 N
- Auxiliary part for initially performing the clamp motion/Retaining workpieces during revolution motion .
Design Evaluation
Verification of main components
- Verify the cylinder thrust and spring load from the load moment.
- Check the force to operate the arm.
- Conditional values: Workpiece mass m = 0.03 kg
Gravitational acceleration = 9.8 m/s²
Cylinder diameter = 16 mm
Supply pressure = 0.5 Mpa
Mechanical efficiency = 80%
Distance between the tension spring shaft and the rotary shaft at the chuck release: L1 = 10.5 mm
Distance between the tension spring shaft and the rotary shaft after the workpiece is moved: L2 = 28.3 mm
Distance between the tension spring shaft and the rotary shaft at the chuck release: L3 = 38.4 mm
Distance between the cylinder shaft and the rotary shaft after the workpiece is moved: L4 = 17.3 mm
Tension spring natural length L = 80 mm
Initial tension of the tension spring: F1 = 3.73 N
Length of the tension spring at the chuck release: L5 = 114 mm
Length of the tension spring after revolution of the workpiece: L6 = 99 mm
Spring constant k = 0.22 N/mm
Tension of the tension spring at the chuck release: F2 ＝ F1+ k x (L5-L) ＝ 3.73 + 0.22 x (114 - 80) ＝ 11.2 N
Tension of the tension spring at the chuck release: F3 ＝ F1+ k x (L6-L) ＝ 3.73 + 0.22 x (99 - 80) ＝ 7.9 N
Cylinder thrust F4 = 101 N
Cylinder thrust F5 = 75 N
Moment ratio.
In chuck operation/arm revolution.
Moment generated by the cylinder thrust. From M1 = F4 x L3, M1 = 101x 38.4 ＝ 3879 N・mm
Moment generated by the spring. From M2 = F2 x L1, M2 ＝ 11.2 x 10.5 ＝ 117.6 N・mm
When the arm is pulled up after revolution of the workpiece.
Moment generated by the cylinder thrust. From M3＝F5×L4, M3 ＝ 75 x 17.3 ＝ 1297.5 N・mm
Moment generated by the spring. From M4 ＝ F3 x L2, M4 ＝ 7.9 x 28.3 ＝ 223.6 N・mm
From calculations shown above, we obtain M1≫M2 and M3≫M4, which shows that the arm drive operates without delay.
- Conditional values: Workpiece mass m = 0.03 kg
Other Design Consideration
- Shape of the shoulder pad for locating the main revolution arm.
- Link shape at the chuck part that fixes the grip release angle and grip close angle.
Explore Similar Application Examples
Page
1
/
31
