(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- inCAD Library Home
- > No.000028 Vertical Feed Mechanism
No.000028 Vertical Feed Mechanism
112
Vertical feed with a linear motion gearhead and motor
Relevant category
Flanged Linear Bushing
| Product name | Flanged Linear Bushings |
|---|---|
| Part number | LHFRD16 |
| Features | Full Length is 1.5 times greater than the Single Length and has an Allowable Moment that is 4.3 times greater. Suitable when there is insufficient space for the Double Type |
Selection criteria
Flanged type is suitable as a linear guide for this app. example.
Available sizes
■Flanged Linear Bushings
| Flange Shape | Outer cylinder | Ball | Retainer | Accessory Seal | Operating ambient temperature | ||
|---|---|---|---|---|---|---|---|
| Material | Hardness | Surface treatment | Material | Material | Material | ||
| Round flange ・Square flange ・Compact flange | 52100 Bearing Steel | 58HRC- | - | 52100 Bearing Steel | Resin (Duracon 90 equivalent) | Nitrile rubber | -20～80℃ |
| Electroless nickel plating | 440C Stainless Steel | ||||||
■Sizes and Dimensions
| (Shaft DIA.) | Outer cylinder diameter | Overall length | Flange | |
|---|---|---|---|---|
| Max. width | Thickness | |||
| φ6 | φ12 | 29 | 28 | 5 |
| φ8 | φ15 | 37 | 32 | |
| φ10 | φ19 | 47 | 40 | 6 |
| φ12 | φ21 | 42 | ||
| φ13 | φ23 | 43 | ||
| φ16 | φ28 | 56 | 48 | |
| φ20 | φ32 | 65 | 54 | 8 |
| φ25 | φ40 | 83 | 62 | |
| φ30 | φ45 | 90 | 74 | 10 |
Selection steps
■Linear bushing selection steps
Accuracy Info
■Accuracy info. of flanged linear bushing
| (Shaft DIA.) | Outer cylinder DIA. | Tolerance | Overall length tolerance | ||
|---|---|---|---|---|---|
| tolerance | No surface treatment | Surface treated | |||
| φ6 | 0/-0.010 | φ12 | 0/-0.013 | 0/-0.018 | ±0.3 |
| φ8 | φ15 | ||||
| φ10 | φ19 | 0/-0.016 | 0/-0.021 | ||
| φ12 | φ21 | ||||
| φ13 | φ23 | ||||
| φ16 | φ28 | ||||
| φ20 | 0/-0.012 | φ32 | 0/-0.019 | 0/-0.025 | |
| φ25 | φ40 | ||||
| φ30 | φ45 | ||||
Performance info.
■Load rating of flanged linear bushing
| (Shaft DIA.) | Basic load rating | Allowable static moment | |
|---|---|---|---|
| C (Dynamic) N | C0 (Static) N | (N・m) | |
| φ6 | 226 | 310 | 1.42 |
| φ8 | 310 | 452 | 2.12 |
| φ10 | 508 | 718 | 4.37 |
| φ12 | 634 | 814 | 6.2 |
| φ13 | 640 | 826 | 6.2 |
| φ16 | 1164 | 1448 | 13.1 |
| φ20 | 1554 | 2068 | 18.3 |
| φ25 | 1725 | 3068 | 25.3 |
| φ30 | 2440 | 3974 | 42.7 |
Technical calculations
■Life of Linear Bushing
When the linear systems are in motion with loads, rolling surfaces and races are subject to repeated stress and will show scale-flaking due to material fatigue. The total run distance until the flaking appear is the "Life" .
The rated life can be calculated with the following formula based on basic dynamic load rating and the load applied on the bushing.
- L: Rated life (km)
- fH: Hardness factor (See Fig.1)
- fT: Temperature factor (See Fig. 2)
- fC: Contact factor (See Table-3)
- fW: Load factor (See table-4)
- C: Basic dynamic load rating (N)
- P: Applicable load (N)
Hardness factor (fH)
For linear systems, the shaft that the balls contact must have sufficient hardness,If the shaft does not have sufficient hardness, the load rating decreases and life will be reduced as a result.
Fig.-1. Hardness factor
Temperature factor (fT)
When the temperature of linear systems exceed 100℃, hardness will be reduced and as a result, the allowable loads and life will be reduced.
Fig.-2. Temperature factor
Contact factor (fC)
In general, it is common to use 2 linear systems are used for 1 shaft, in general. In these cases, the load on each linear system will vary depending on machining accuracies and will not have equally distributed loads. As a result, the allowable load per linear system will very depending on the number of linear systems used on one shaft.
Table-3. Contact factor
| Number of bearings installed on one shaft. | Contact factor fC | |
|---|---|---|
| 1 | 1 | |
| 2 | 0.81 | |
| 3 | 0.72 | |
| 4 | 0.66 | |
| 5 | 0.61 | |
Load factor (fW)
To calculate load applied to the linear system, in addition to object weight, inertia force attributed to motion velocity, moment loads and variations of each over time must be obtained. However, for reciprocating motion applications, it is difficult to obtain accurate calculations due to the effects of vibrations and shocks. Therefor, use Table-2 below in order to simplify the Life Calculations.
| Application conditions | fw |
|---|---|
| No external shocks or vibrations and speed is low 15m/min or less | 1.0～1.5 |
| No significant shocks or vibration and med. speed 60m/min or less | 1.5～2.0 |
| External shocks and vibrations exist and the speed is high 60m/min or over | 2.0～3.5 |
Life in hours can be obtained by calculating travel distance per hour. When stroke length and stroke cycles are fixed, see the equation below.
- Lh: Life (Hr)
- L: Rated life (km)
- Ls: Stroke length (m)
- n1: Number of cycles per minute (cpm)
Shaft
| Product name | Precision Linear Shafts - Straight Type |
|---|---|
| Part number | PSFJ16-305 |
Selection criteria
An inexpensive option for a guide component
Available sizes
■Precision Linear Shafts - Straight Type
| Material | Hardness | Surface treatment | O.D. tolerance | ||
|---|---|---|---|---|---|
| g6 | h5 | f8 | |||
| 52100 Bearing Steel | Induction hardened 58HRC〜 | − | ○ | ○ | − |
| 440C Stainless Steel | Induction hardened 56HRC〜 | ○ | ○ | − | |
| 52100 Bearing Steel | Induction hardened 58HRC〜 | Hard chrome plating Plating hardness HV750~ Plating thickness 5μ or more | ○ | ○ | − |
| 440C Stainless Steel | Induction hardened 56HRC〜 | ○ | ○ | − | |
| 52100 Bearing Steel | Induction hardened 58HRC〜 | Low temperature black chrome plating | ○ | − | − |
| 1045 Carbon Steel | − | Hard chrome plating | − | − | ○ |
| Plating hardness HV750~ | |||||
| 304 Stainless Steel | Plating thickness 10μ or more | − | − | ○ | |
■Sizes
| O.D. tolerance | O.D. | Length |
|---|---|---|
| (Configure in 1mm increments) | ||
| g6・h5 | φ3 | 10〜 400 |
| φ4 | ||
| φ5 | ||
| φ6 | 20〜 600 | |
| φ8 | 20〜 800 | |
| φ10 | ||
| φ12 | 20〜1000 | |
| φ13 | 25〜1000 | |
| φ15 | ||
| φ16 | 30〜1200 | |
| φ18 | ||
| φ20 | ||
| φ25 | 35〜1200 | |
| φ30 | 35〜1500 | |
| φ35 | ||
| φ40 | 50〜1500 | |
| φ50 | 65〜1500 | |
| f8 | φ6 | 20〜 600 |
| φ8 | 20〜 800 | |
| φ10 | ||
| φ12 | 20〜1000 | |
| φ13 | 25〜1000 | |
| φ15 | ||
| φ16 | 30〜1200 | |
| φ18 | ||
| φ20 | ||
| φ25 | 35〜1200 | |
| φ30 | 35〜1500 | |
| φ35 | ||
| φ40 | 50〜1500 | |
| φ50 | 65〜1500 |
Accuracy Info
■O.D. tolerance table
| O.D. | O.D. tolerance | ||
|---|---|---|---|
| g6 | h5 | f8 | |
| φ3 | -0.002 -0.008 | 0 -0.004 | - |
| φ4 | -0.004 -0.012 | 0 -0.005 | |
| φ5 | |||
| φ6 | -0.010 -0.028 | ||
| φ8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
| φ10 | |||
| φ12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
| φ13 | |||
| φ15 | |||
| φ16 | |||
| φ18 | |||
| φ20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
| φ25 | |||
| φ30 | |||
| φ35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
| φ40 | |||
| φ50 | |||
IDEA NOTE Up/down pitch feed with a linear motion gearhead and motor
Up/down pitch feed mechanism with a linear motion gearhead and motor take out equally spaced apart workpieces loaded on a tray.
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Workpieces on platform can be raised to adjustable height.
- Self-locking type motor prevents falling.
Target workpiece
- Workpiece
- External dims.: W147 x D167 x H12
- Weight: 0.3kg
- Tray
- External dims.: W180 x D200 x H179
- Weight: 0.6kg
- Max. weight
(5 workpieces + 5 Trays)
(0.3 x 5) + (0.6 x 5) = 4.5kg
Design Specifications
Operating Conditions or Design Requirements
- Slide stroke: 116mm (Pitch 29mm x 4)
- External dims.: W480 x D350 x H537
Required Performance
- Total transferred mass: 16 kg or less
Selection Criteria for Main Components
- Motor
- Load retaining type is selected to prevent falling due to own weight.
- Linear motion gearhead
- Vertical motion type is selected to move the workpieces up/down.
- Sensor
- 2 output type sensor is selected for pitch feeding.
Design Evaluation
Verification of main components
- Verify the motor regarding required speed and load capacity.
- Rack speed
- Motor speed (Ns): 90~1600 r/min
- Reduction ratio of linear motion gearhead (i): 35.36
- Pitch circle DIA. of the pinion (Dp): 12mm
- Rack speed (V)
V = Ns × (1 / 60) × (1 / i) × π × Dp - Vmin = 90 × (1 / 60) × (1 / 35.36) × π × 12 = 1.6 mm/s
- Vmax = 1600 × (1 / 60) × (1 / 35.36) × π × 12 = 28.43 mm/s
- Assumed rack speed: 15mm/s, OK.
- Max. payload
- Motor torque Tm: 45N・m
- Reduction ratio of linear motion gearhead (i): 35.36
- Pitch circle DIA. of the pinion (Dp): 12mm
- Transmission efficiency by reduction ratio (η1) : 0.66
- Transmission efficiency of rack and pinion (η2): 0.9
- The maximum allowable load capacity (W):
W = Tm × I × η1 / (Dp / 2) × η2 / 9.8 = 45 × 35.36 × 0.66 / (12 / 2) × 0.9 / 9.8 = 16 kg
Total elevating mass: Workpiece + Tray + Base + Rack + Others = 4.5 + 1.3 + 1 + 2 ＝ 8.8 kg ＜ 16 kg
Other Design Consideration
- Pitch feeding is possible when using a photomicro sensor to detect the pitch.
- The lower most tray and the upper most tray are detected by a photoelectric switch.
- For detecting the lower most limit, another sensor and pitch detection plate are placed (Limit switch).
- For detecting the upper most limit, another sensor and a sensor flag are placed (Limit switch)
Explore Similar Application Examples
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.