(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Quote /Order Báo giá /Đặt hàng
-
MISUMI App QR Code Click for More Details
- inCAD Library Home
- > No.000109 Feeding Mechanism
No.000109 Feeding Mechanism
40
40
Stops and separates round bars in one step.
Relevant category
Cam Followers
| Product name | Cam Followers - Flat Type - No Seal |
|---|---|
| Part number | CFFR5-13 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable as a joint part of link mechanism.
Available sizes
■Cam Followers - Flat Type - No Seal
| Usage | Main Body | Nut | |||
|---|---|---|---|---|---|
| Material | Seal | Material | Surface Treatment | ||
| Not Provided | Provided | ||||
| General | 52100 Bearing Steel | ○ | ○ | 1045 Carbon Steel | Black Oxide |
| 440C Stainless Steel | ○ | ○ | 304 Stainless Steel | - | |
| Low Dust Generation | - | ○ | |||
■Sizes and Dimensions.
| Stud Dia. | Thread Dia. x Pitch | Outer Ring Dia. | Outer Ring Width | Overall Length |
|---|---|---|---|---|
| φ5 | M5×0.8 | φ13 | 9 | 23 |
| φ6 | M6×1.0 | φ16 | 11 | 28 |
| φ8 | M8x1.25 | φ19 | 11 | 32 |
| φ10 | M10x1.25 | φ22 | 12 | 36 |
| φ26 | ||||
| φ12 | M12x1.5 | φ30 | 14 | 40 |
| φ32 | ||||
| φ16 | M16x1.5 | φ35 | 18 | 52 |
| φ18 | M18×1.5 | φ40 | 20 | 58 |
| φ20 | M20×1.5 | φ52 | 22 | 66 |
Accuracy Info
■Accuracy of Cam Followers.
Stud Dia. Tolerance: h7.
Outer Ring Width Tolerance: 0/-0.12.
Outer race DIA. Tolerance:
| Outer Ring Dia. | Tolerance |
|---|---|
| φ13 | 0/-0.008 |
| φ16 | |
| φ19 | 0/-0.009 |
| φ22 | |
| φ26 | |
| φ30 | |
| φ32 | 0/-0.011 |
| φ35 | |
| φ40 | |
| φ52 | 0/-0.013 |
Performance info
Cam Follower Load Rating and Rotational Speed.
| Stud Dia. -Outer Ring Dia. | Basic Dynamic Load Rating C (kN) | Basic Static Load Rating Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity (kN) | Max. Rotational Speed (rpm) | |
|---|---|---|---|---|---|---|
| With Seal | No Seal | |||||
| φ3−φ10 | 1.47 | 1.18 | 0.36 | 1.37 | 32900 | 47000 |
| φ4−φ12 | 2.06 | 2.05 | 0.78 | 1.76 | 25900 | 37000 |
| φ5−φ13 | 3.14 | 2.77 | 1.42 | 2.25 | 20300 | 29000 |
| φ6−φ16 | 3.59 | 3.58 | 2.11 | 3.43 | 17500 | 25000 |
| φ8−φ19 | 4.17 | 4.65 | 4.73 | 4.02 | 14000 | 20000 |
| φ10−φ22 | 5.33 | 6.78 | 5.81 | 4.7 | 11900 | 17000 |
| φ10−φ26 | 5.49 | |||||
| φ12−φ30 | 7.87 | 9.79 | 9.37 | 7.06 | 9800 | 14000 |
| φ12−φ32 | 7.45 | |||||
| φ16−φ35 | 12 | 18.3 | 17.3 | 11.2 | 7000 | 10000 |
| φ18−φ40 | 14.7 | 25.2 | 26.1 | 14.4 | 5950 | 8500 |
| φ20−φ52 | 20.7 | 34.8 | 32.1 | 23.2 | 4900 | 7000 |
Shaft Collar
| Product name | Shaft Collars - With Counterbored Holes |
|---|---|
| Part number | PSCSG10-15 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Select the counterbored type to maintain the workability of the mounting screws when adjusting the position of shaft clamps.
Available sizes
■Shaft Collars - With Counterbored Holes
| Material | Surface Treatment |
|---|---|
| 1045 Carbon Steel | Black Oxide |
| Electroless Nickel Plating | |
| 304 Stainless Steel | - |
■Sizes and Dimensions.
| Shaft Bore I.D. | Overall Thickness (width) | O.D. | Fastening Screw DIA. (Coarse) | For Screw Hole | |
|---|---|---|---|---|---|
| Pitch | Hole Dia. | ||||
| φ6 | 8 | φ24 | M3 | 15 | φ3.5 |
| 10 | M4 | ||||
| φ8 | 8 | φ25 | M3 | 17 | |
| 10 | φ28 | M4 | 18 | φ4.5 | |
| φ10 | φ33 | 22 | φ5.5 | ||
| 12 | M5 | ||||
| 15 | φ36 | M6 | 23 | φ6.6 | |
| φ12 | 10 | φ35 | M4 | 24 | φ5.5 |
| 12 | M5 | ||||
| 15 | φ38 | M6 | 25 | φ6.6 | |
| φ13 | 10 | φ33 | M4 | 23 | φ4.5 |
| 12 | φ36 | M5 | 25 | φ5.5 | |
| 15 | M6 | ||||
| φ15 | 12 | φ38 | M5 | 27 | |
| 15 | φ40 | M6 | 28 | φ6.6 | |
| φ16 | 10 | φ36 | M5 | 26 | φ4.5 |
| 12 | φ38 | 28 | φ5.5 | ||
| 15 | φ42 | M6 | 29 | φ6.6 | |
| φ20 | 12 | M5 | 32 | φ5.5 | |
| 15 | φ45 | M6 | 33 | φ6.6 | |
| 20 | |||||
| φ25 | 12 | φ48 | M5 | 37 | φ5.5 |
| 15 | φ50 | M6 | 38 | φ6.6 | |
| φ30 | φ55 | 43 | |||
| φ35 | φ60 | 48 | |||
| φ40 | 18 | φ78 | M8 | 60 | φ9 |
| φ50 | 22 | φ88 | M10 | 71 | φ11 |
Accuracy Info.
■Accuracy of shaft collars.
| I.D. Tolerance | +0.05/+0.01 |
|---|---|
| O.D. Tolerance | ±0.1 |
| Overall Thickness (width) Tolerance | ±0.1 |
Knuckle Joints
| Product name | Knuckle Joints - Tapped, Selectable |
|---|---|
| Part number | NJTB6-1.0-B4 |
| Features | Knuckle Joints equipped with Rotation Stopper and compatible with M3~M18 screws regardless of Convex Type or Concave Type. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable as a oscillating part of cylinder link mechanism.
Available sizes
■Knuckle Joints - Tapped, Selectable
| Material | Surface Treatment | Convex Shaped | Concave Shaped |
|---|---|---|---|
| 1045 Carbon Steel | Black Oxide | ○ | ○ |
| Electroless Nickel Plating | − | ○ | |
| 304 Stainless Steel | − | ○ | ○ |
■Sizes and Dimensions.
| Thread Dia. x Pitch | Joint Parts | Hole Dia. | Overall Length | Overall thickness | Width |
|---|---|---|---|---|---|
| Thickness (width) | |||||
| M3×0.5 | 4・5 | φ4 | 20 | 10 | 10 |
| M4×0.7 | 5・6 | φ5 | 25 | ||
| M5×0.8 | 12 | 12 | |||
| M6×1.0 | 4・6 | ||||
| M8×1.0 | 5・8 | φ8 | 35 | 16 | 16 |
| M8×1.25 | |||||
| M10×1.25 | 6・10 | φ10 | 20 | 20 | |
| M10×1.5 | |||||
| M12×1.25 | 8・10 | φ12 | 40 | 22 | 22 |
| M12×1.5 | |||||
| M14×1.5 | 10・12 | 50 | 25 | 25 | |
| M16×1.5 | 55 | ||||
| M18×1.5 | 12・14 | 28 | 28 |
IDEA NOTE Separates cylindrical workpieces by means of a single actuator.
By setting the claw rotation center positions, claw opening amount and stopper position with ingenuity, separation action by a single actuator is made possible.
The claws rotate to release the lowermost workpiece and stop the next workpiece.
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Purpose
- To separate and transfer cylindrical workpieces.
- Operation
- The electric actuator is used to operate the arm and claws, which separate the workpieces one by one.
Target workpiece
- Aluminum roller.
- Size: φ20 x L200mm.
- Weight: 170g.
Design Specifications
Operating Conditions or Design Requirements
- Claw rotation angle: 10°
- Cylinder stroke: 30mm.
Selection Criteria for Main Components
- An electric cylinder with a 30mm stroke is selected to rotate the claws by 10 degrees.
Design Evaluation
Verification of main components
- Verify whether the robot cylinder has a speed high enough to make the cam perform workpiece separation.
- Confirmation of robot cylinder speed.
- Conditional value: gravitational acceleration g = 9.8m/s², stroke of robot cylinder that rotates cam at rotation angle of 10°: L0 = 29.6mm,
Equation of free-fall motion (when initial velocity is Vo = 0, t = elapsed time [sec], h = displacement amount [m]), velocity: V = G x t, displacement amount: h = 1/2 x t², elapsed time: t = √(2 x h/g)
State (1): The lower part of cam is closed and the lowermost workpiece is stopped.
State (2): The lower part of cam is opened and the lowermost workpiece and the next workpiece start dropping.
State (3): The lower part of the cam is completely opened and the next workpiece is stopped by the stopper.
Displacement amount of next workpiece between state (2) and state (3): h = 4.4mm = 0.0044m,
Stroke of robot cylinder that rotates cam at rotation angle of 0.8° between state (2) and state (3): L1 = 2.37mm,
Elapsed time during this period: t = √(2 x h/g) = √(2 x 0.0044/9.8) = 0.03 sec
Required cylinder speed calculated from robot cylinder stroke and elapsed time: Vs = L1/t = 2.37/0.03 = 79mm/sec
As this speed is within the robot cylinder maximum speed of 100 mm/sec, the next workpiece is stopped and workpiece separation is possible.
- Conditional value: gravitational acceleration g = 9.8m/s², stroke of robot cylinder that rotates cam at rotation angle of 10°: L0 = 29.6mm,
Other Design Consideration
- Due to the lack of an air pressure source, an electric cylinder is used.
- The height of the shoot is designed to be adjusted using the external threads of hex posts and nuts.
Explore Similar Application Examples
Page
1
/
32
