(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- inCAD Library Home
- > No.000232 Positioning Mechanism
No.000232 Positioning Mechanism
51
51
Manually positioning mechanism.
Relevant category
Lead Screw
| Product name | Lead Screws - Straight |
|---|---|
| Part number | MTSTR16-474 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Converts rotary to linear motion.
Available sizes
■Lead Screws - Straight
| Material | Surface Treatment | Compatible lead screw nut | |
|---|---|---|---|
| Type | Material | ||
| 1045 Carbon Steel | - | Right-hand Thread | Brass |
| Black Oxide | |||
| 303 Stainless Steel | - | ||
■Sizes and Dimensions
| Screw shaft nominal | Pitch | Overall Length | |
|---|---|---|---|
| 1mm Increment | 100 mm Increments | ||
| 8 | 1.5 | 50?500 | - |
| 10 | 2 | 80?1000 | |
| 12 | |||
| 14 | 3 | ||
| 16 | 100?1200 | 1300～2000 | |
| 18 | 4 | 150?1200 | |
| 20 | |||
| 22 | 5 | ||
| 25 | |||
| 28 | |||
| 32 | 6 | 200?1200 | |
| 36 | |||
| 40 | |||
| 50 | 8 | - | |
* Manufacturable ranges vary slightly depending on material or screw shaft nominal Dia. Please see the product pages for details.
Accuracy Info
■Lead screw: Screw shaft runout tolerance (Max.)
(mm)
| Shaft Dia. | Screw shaft length | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| -125 | 126 -200 | 201 -315 | 316 -400 | 401 -500 | 501 -630 | 631 -800 | 801 -1000 | 1001-1250 | 1251-1600 | 1601-2000 | |
| φ8 | 0.1 | 0.14 | 0.21 | 0.27 | 0.35 | - | - | - | - | - | - |
| φ10-12 | 0.09 | 0.12 | 0.16 | 0.21 | 0.27 | 0.35 | 0.46 | 0.58 | - | - | - |
| φ14 | 0.09 | 0.11 | 0.13 | 0.16 | 0.2 | 0.25 | 0.32 | 0.42 | - | - | - |
| φ16 | 0.09 | 0.11 | 0.13 | 0.16 | 0.2 | 0.25 | 0.32 | 0.42 | 0.55 | 0.73 | 1 |
| φ18-20 | - | 0.11 | 0.13 | 0.16 | 0.2 | 0.25 | 0.32 | 0.42 | 0.55 | 0.73 | 1 |
| φ22-32 | - | 0.09 | 0.11 | 0.13 | 0.16 | 0.19 | 0.23 | 0.3 | 0.38 | 0.5 | 0.69 |
| φ36-50 | - | 0.11 | 0.11 | 0.11 | 0.13 | 0.15 | 0.17 | 0.22 | 0.27 | 0.34 | 0.46 |
■Lead Screw Accuracy Standards
| Item | Content |
|---|---|
| Allowable Dimension and Tolerance | JISB0217 0218 |
| Screw Accuracy | 7e Class |
| Nut Accuracy | 7H Class |
| Single Pitch Error | ±0.02 |
| Accumulated Pitch Error | ±0.15/300mm |
| Length tolerance | JISB0405(Medium class) |
| Screw shaft end DIA. tolerance | h7 |
Technical calculations
■Lead screw・Lead screw nut selection steps
Calculate Contact Pressure P and Sliding Velocity V based on conditions of use to check that no abnormal wear will occur.
Plot the calculated P and V values against the PV value graph and confirm the intersection.
If the intersection falls inside of line (1) and (2), it is determined that abnormal wear would not occur.
Determine conditions of use.
↓
Lead screw・lead screw nut temporary selection
↓
Calculate (1) Contact Pressure P, (2) Sliding Velocity V,
Confirm if it is inside of (1) and (2) on PV value graph.
↓
Calculate screw efficiency η and load torque T.
(Axial load, rotational speed)
(Lead screw・lead screw nut material)
↑
(If not good)
PV Value graph
- ① Steel (lubricated) - Brass
- ② Steel (unlubricated) - Resin
(1) Contact surface pressure P (N/mm2)
- Fs: Shaft axial load(N)
- F 0 ：Allowable Dynamic Thrust (N) -> Nuts for Lead Screw Specifications
Thrust when contact surface pressure of the lead screw and nut becomes 9.8 (N/mm2). - α：9.8(Brass) 0.98(Resin)
(2) Sliding speed V (m/min)
- d2: Screw shaft effective Dia. -> From lead screw specifications table
- d: Screw Shaft Lead Angle (degree) -> Lead Screw Specifications
- n: Screw shaft rotation per minute (nim-1)
(3) Screw efficiency η
- μ: dynamic friction coefficient
- d: Screw shaft lead angle (deg.)
<Dynamic friction coefficient reference value >
| Thread Shaft | Nuts for Lead Screws | Dynamic friction coefficient μ |
|---|---|---|
| Steel (Lubricated) | Brass | 0.21 |
| Steel (Unlubricated) | Polyacetal / PPS Resin with Sliding Property | 0.13 |
(4) Load torque (N・cm)
- Fs: Shaft axial load
- η: Screw efficiency
- R: Lead (cm)
Aluminum Knurled Handwheel
| Product name | Knurled Handwheels - Aluminum |
|---|---|
| Part number | HOKW63 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Consider the operability, and select the one with appropriate O.D.
Available sizes
■Knurled Handwheels - Aluminum
| Handle | Handle | Handle Thread | Tapped | ||
|---|---|---|---|---|---|
| Material | Surface Treatment | Material | Material | Surface Treatment | |
| 5056 Aluminum Alloy | Black anodize | Nylon 6(Black) | 12L13 Carbon Steel | Black Oxide | Tapped Hole |
| Without Tap | |||||
| Clear Anodize | Nylon 6(White) | Tapped Hole | |||
| Without Tap | |||||
| 304 Stainless Steel | - | 304 Stainless Steel | 304 Stainless Steel | - | Tapped Hole |
| Without Tap | |||||
■Sizes and Dimensions
| Knob O.D. | Shaft Bore Dia. | Handle Height | Handle | Set Screw Dia. | |||
|---|---|---|---|---|---|---|---|
| (Black Handle, Black Grip, Tapped) | Mounting height | Width | Diameter | Length | |||
| φ40 | φ8 | φ6・φ8 | 25 | 12 | φ13 | 18.8 | M5 |
| φ50 | φ10 | φ8・φ10 | 28 | 13 | |||
| φ63 | φ12 | φ10・φ12 | 32 | 14 | φ14 | 20.8 | |
| φ80 | φ16 | φ12・φ16 | 40 | 15 | φ16 | 23.8 | M6 |
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Workpiece is roughly set on the manual presser. Using urethane mold bearings and lead screw mechanism, workpiece can be aligned against the presser.
Points for use
- Manual unit is operated by aluminum knurled handwheel mounted on lead screws.
Target workpiece
- Material: Resin
- Shape: thin plate
- Outer dimensions: W140 x D165 x t3 mm
- Workpiece weight: 150g
Design Specifications
Operating Conditions or Design Requirements
- Alignment stroke: 19.5mm (for different workpieces, it can be extended up to 45 mm)
- Outer dimensions: W183 x D430 x H136 mm
Required Performance
- Required accuracy: 0.1 mm
Selection Criteria for Main Components
- Lead screw/nut
- The rotary movement is converted to linear movement for manual positioning.
- Urethane Molded Bearings
- Selected to prevent workpieces from being damaged.
Design Evaluation
Other Design Consideration
- For different size workpieces, a scale can be added to visually confirm proper positioning.
- When pushing a workpiece against the presser, the operator has to confirm workpiece final position and avoid excessive handwheel rotation.
Explore Similar Application Examples
Page
1
/
31
