(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- inCAD Library Home
- > No.000029 Air Flow Confirmation Fixture
No.000029 Air Flow Confirmation Fixture
40
40
Uniform load retention with two springs
Relevant category
Hand Valve
| Product name | One-Touch Coupling Shut-Off Valves |
|---|---|
| Part number | BVHVU4-3 |
| Features | Residual Pressure Relief Valves |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
For an operator to control the inspection timing.
Available sizes
■One-Touch Coupling Shut-Off Valves
| (Tube DIA.) | Number of circuits | Handle color | Effective cross section area (mm2) |
|---|---|---|---|
| φ4 | 2way valve・3way valve | Blue・Red | 3.4 |
| φ6 | 7.2 | ||
| φ8 | 8.7 | ||
| φ10 | 17.4 | ||
| φ12 | 18.1 |
O Ring
| Product name | O-Rings - P Series |
|---|---|
| Part number | NPA5 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Economical and proven airtight component.
Available sizes
■O-Rings - P Series
| Material | Hardness (JIS Hs) | Color | Usable temperature range | JIS Symbol | Purpose |
|---|---|---|---|---|---|
| Nitrile rubber | 70±5 | Black | －30-100℃ | Class1A | Mineral oil resistant |
| 90±5 | Black | －25-100℃ | Class1B | ||
| Silicon rubber | 50±5 | Milky white | －50-200℃ | − | Heat resistant |
| 70±5 | Dark blue | －50-200℃ | Class4C | ||
| Fluorine rubber | 70±5 | Black | －15-200℃ | Class4D | |
| 90±5 | Black | －15-200℃ | − | ||
| Ethylene- propylene rubber | 70±5 | Black | －45-130℃ | − | Weather resistant |
Sizes and Dimensions(Excerpt)
| JIS nominal number | Ring I.D. | Ring Wire DIA. | Mating side DIA. | |
|---|---|---|---|---|
| Against O ring | ||||
| Internal contact | External contact | |||
| P3 | φ2.8 | φ1.9 | φ3 | φ6 |
| P4 | φ3.8 | φ4 | φ7 | |
| P5 | φ4.8 | φ5 | φ8 | |
| P6 | φ5.8 | φ6 | φ9 | |
| P7 | φ6.8 | φ7 | φ10 | |
| P8 | φ7.8 | φ8 | φ11 | |
| P9 | φ8.8 | φ9 | φ12 | |
| P10 | φ9.8 | φ10 | φ13 | |
| P10A | φ9.8 | φ2.4 | φ10 | φ14 |
| P11 | φ10.8 | φ11 | φ15 | |
| P11.2 | φ11 | φ11.2 | φ15.2 | |
| P12 | φ11.8 | φ12 | φ16 | |
| P12.5 | φ12.3 | φ12.5 | φ16.5 | |
| P14 | φ13.8 | φ14 | φ18 | |
| P15 | φ14.8 | φ15 | φ19 | |
| P16 | φ15.8 | φ16 | φ20 | |
| P18 | φ17.8 | φ18 | φ22 | |
| P20 | φ19.8 | φ20 | φ24 | |
| P21 | φ20.8 | φ21 | φ25 | |
| P22 | φ21.8 | φ22 | φ26 | |
＊Please see the product pages for other diameter rings.
Accuracy Info
■Accuracy of O ring P series
Ring wire DIA. tolerance:
| Wire DIA. | tolerance |
|---|---|
| φ1.9 | ±0.08 |
| φ2.4 | ±0.09 |
| φ3.5 | ±0.10 |
| φ5.7 | ±0.13 |
Parting surface burr height: 0.1 or less
Parting surface burr width: 0.15 or less
Ring I.D. tolerance:
| JIS nominal number | Ring I.D. | Tolerance | ||
|---|---|---|---|---|
| Nitrile | Silicon | Fluorine | ||
| Ethylene | ||||
| P3 | φ2.8 | ±0.14 | ±0.21 | ±0.16 |
| P4 | φ3.8 | |||
| P5 | φ4.8 | ±0.15 | ±0.22 | ±0.18 |
| P6 | φ5.8 | |||
| P7 | φ6.8 | ±0.16 | ±0.24 | ±0.19 |
| P8 | φ7.8 | |||
| P9 | φ8.8 | ±0.17 | ±0.25 | ±0.20 |
| P10 | φ9.8 | |||
| P10A | φ9.8 | |||
| P11 | φ10.8 | ±0.18 | ±0.27 | ±0.21 |
| P11.2 | φ11 | |||
| P12 | φ11.8 | ±0.19 | ±0.28 | ±0.22 |
| P12.5 | φ12.3 | |||
| P14 | φ13.8 | |||
| P15 | φ14.8 | ±0.20 | ±0.30 | ±0.24 |
| P16 | φ15.8 | |||
| P18 | φ17.8 | ±0.21 | ±0.31 | ±0.25 |
| P20 | φ19.8 | ±0.22 | ±0.33 | ±0.26 |
| P21 | φ20.8 | ±0.23 | ±0.34 | ±0.27 |
| P22 | φ21.8 | ±0.24 | ±0.36 | ±0.28 |
| P22A | φ21.7 | |||
| P22.4 | φ22.1 | |||
| P24 | φ23.7 | |||
| P25 | φ24.7 | ±0.25 | ±0.37 | ±0.30 |
| P25.5 | φ25.2 | |||
| P26 | φ25.7 | ±0.26 | ±0.39 | ±0.31 |
| P28 | φ27.7 | ±0.28 | ±0.42 | ±0.33 |
| P29 | φ28.7 | ±0.29 | ±0.43 | ±0.34 |
| P29.5 | φ29.2 | |||
| P30 | φ29.7 | |||
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- A fixture that applies a uniform force to hold down a resin tube.
- This setup is designed for measurement of fluid flow rate through resin tube.
Points for use
- This setup is vertically mounted and the resin tube is manually secured by toggle clamps.
- An o-ring is used to prevent fluid leakage .
Target workpiece
- Resin tubing
External dims.: W70 x D44 x H18
Weight: 25g
Design Specifications
Operating Conditions or Design Requirements
- Toggle clamp stroke: 17mm
- Spring deflection: 7mm
- External dims.: W220 x D210 x H127 (max.)
Required Performance
- Workpiece retaining load: 23.5N
Selection Criteria for Main Components
- Toggle clamp
- Side push type since horizontal motion is required.
- Linear guide
- While the moment load is minimal, select the appropriate miniature linear guide that matches the fixture size.
Design Evaluation
Verification of main components
- Select a spring capable of retaining the workpiece.
- Spring load
- Calculation formula: F = kx
- Assumed load: F = 23.5N (for 2 springs)
- Assumed deflection when pressure applied: x = 12mm (When set 5mm (Set length: 20mm, Free length: 25mm), When stroked 7mm)
- Spring constant: k = 23.5 / 2 / 12 = 0.98N/mm selected
Other Design Consideration
- Based on the calculated forces required, select a spring stiffness that can reliably clamp the workpiece.
Explore Similar Application Examples
Page
1
/
17
