Universal Joints

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Universal Joints - Set Pin

  MISUMI

  [Features]·This is a coupling that allows the joining angle to be changed freely.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	5.01~10.00 ～ 100 < 500	-	12 ～ 51	31 ～ 139	-	Standard	Others / Standard Type	-	Steel	5.3 ～ 495	-	-	-	-

  From: 133,871 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Coupling (SFC Series)

  SUNGIL

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  4 ～ 16	1.01~3.00	4 ～ 16	29 ～ 54	28 ～ 58	-	-	-	2001~4000	Steel	0.12 ～ 1.5	3000	1.1~3.0	2 ～ 3	10 ～ 12

  From: 472,650 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Universal Joints - Set Keyway / Tapped

  MISUMI

  [Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 30	20.01~50.00 ～ 50.01~100.00	-	19 ～ 36	42 ～ 139	-	Standard	Others / Standard Type	-	Steel	20.1 ～ 175	-	-	-	-

  From: 133,871 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Joint Coupling (SCJ Series)

  SUNGIL

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 15	0.05~1.00 ～ 3.01~5.00	3 ～ 15	15 ～ 40	22.4 ～ 51	Heat Resistant ～ Small	Servo Motor	Standard Type	2001~4000 ～ 10001~78000	Aluminum ～ Aluminum Alloy	0.25 ～ 5	3500 ～ 21000	0.21~0.40 ～ 0.41~1.0	0.3 ～ 0.5	3 ～ 7

  From: 739,164 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide SPS Series

  MIYOSHI KIKAI

  SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  5 ～ 38	-	-	5 ～ 35	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 595,218 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJ Series

  MIYOSHI KIKAI

  [Features]· With total hardening treatment for increased fatigue strength.· Additional machining cannot be performed on the hardened product.· To extend life, boots and oil pack should be used.· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.· With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	31 ～ 122	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	500 ～ 1800	-	-	-

  From: 844,910 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Power Type B Series

  MIYOSHI KIKAI

  [Features]· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	50 ～ 300	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	220 ～ 1700	-	-	-

  From: 737,496 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

  MIYOSHI KIKAI

  [Features]·Joints with hexagonal shafts and intermediate shafts can be cut freely·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	105~232 ～ 399~599	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,900,359 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Shaft Fitting, Correctable, UA-C Series

  SAKAI MANUFACTURING

  Ideal for high precision and highly responsive control.[Features]· With high performance and double bolt clamp specification, suitable for high precision, highly responsive control.

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 20	0.05~1.00 ～ 10.01~20.00	3 ～ 20	15 ～ 55	18 ～ 58	High Torsional Rigidity ～ Low Moment of Inertia	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Aluminum	0.25 ～ 20	6000	0.02~0.2	0.2	1

  From: 907,270 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, K Model

  MIYOSHI KIKAI

  [Features]·Grease-filled needle bearings are used, making them suitable for high-speed rotation.·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.·K-20 and above have a grease nipple.·When using boots, please use type B or type H.·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.·With keyway processing, the spring pins are not included.[Applications]·For high speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	62 ～ 178	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	950 ～ 2500	-	-	-

  From: 2,904,183 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

  MIYOSHI KIKAI

  [Features]· Dry lubrication treatment for wear resistance (HS-16 and higher)· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not attached.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12.5 ～ 120	40 ～ 300	-	Standard	Standard Type	< 100 ～ 301~1000	Stainless Steel	-	90 ～ 800	-	-	-

  From: 1,263,400 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Paraflex CPE· CPU Model

  MIKI PULLEY

  High rigidity with high precision pin and dry metal to minimize backlash.[Features]· The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.· As it is universal type, the shaft reaction force due to installation error is extremely small.· With damping effect due to sliding friction surface of pin and dry metal.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 22	0.05~1.00 ～ 20.01~50.00	3 ～ 22	19 ～ 46	19.4 ～ 54	High Accuracy ～ Small	Standard / Servo Motor / Stepping Motor	Standard Type	2001~4000 ～ 4001~10000	Aluminum	0.4 ～ 25	3000 ～ 6000	0.02~0.2 ～ 0.41~1.0	0.2 ～ 0.5	1 ～ 4

  From: 1,226,803 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model, M Model

  MIYOSHI KIKAI

  High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  2 ～ 5.5	-	-	6 ～ 10	15 ～ 30	Small	Standard	Standard Type	301~1000	Steel	-	700 ～ 1000	-	-	-

  From: 922,102 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic / Universal / Joint MCM Series

  MIGHTY

  [Features]·Zero backlash·Angle absorption of 45 degrees for single and 90 degrees for double·Electrical insulation, non-magnetic·Lightweight and does not require lubrication·Excellent durability and chemical resistance[Applications]·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems·Information equipment, communication equipment, switching systems·audio equipment, audiovisual equipment·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  2 ～ 10	0.05~1.00 ～ 1.01~3.00	2 ～ 10	7.1 ～ 17.5	27.2 ～ 89.8	High Accuracy ～ No Backlash	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Plastic	0.08 ～ 1.6	10000	5.1~100	5.6 ～ 15.5	45 ～ 90

  From: 956,200 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  Standard Type, Precision Type H Series

  MIYOSHI KIKAI

  [Features]·The pin is dry lubricated to improve abrasion resistance.·Please use boots and oil packs to extend the life of the joints.·For B or T, please specify the new JIS key or the old JIS key.·With keyway processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	40 ～ 165	High Accuracy ～ High Durability	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	510 ～ 2000	-	-	-

  From: 1,210,556 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Universal Joint, MC Series

  MIGHTY

  [Features]·Zero backlash·Angle absorption of 45 degrees for single and 90 degrees for double·Electrical insulation, non-magnetic·Lightweight and does not require lubrication·Excellent durability and chemical resistance[Applications]·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems·Information equipment, communication equipment, switching systems·audio equipment, audiovisual equipment·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 10	0.05~1.00 ～ 1.01~3.00	3 ～ 10	7.1 ～ 17.5	19.1 ～ 75.5	High Accuracy ～ No Backlash	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Plastic	0.08 ～ 1.6	10000	5.1~100	5.6 ～ 15.5	45 ～ 90

  From: 314,861 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large plastic universal joint MD series

  MIGHTY

  [Features]·Zero backlash·Electrical insulation, non-magnetic·Oil free·Resistant to pushing and pulling·Light weight, low inertia[Applications]·Control systems, push-pull transmission mechanisms, audio equipment, audio-visual equipment, textile machinery, instrumentation equipment, environmental equipment, equipment for outdoor use

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 20	1.01~3.00 ～ 10.01~20.00	8 ～ 20	23 ～ 36.5	62 ～ 86	High Accuracy ～ Small	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	-	Plastic	2.8 ～ 10.7	-	-	-	40

  From: 1,411,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

  MIYOSHI KIKAI

  This product is non-magnetic and has excellent corrosion resistance. [Materials]·Bronze BC6.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 25	-	-	16 ～ 50	40 ～ 108	-	Standard	Standard Type	-	Alloy	-	-	-	-	-

  From: 1,523,510 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide GX Series

  MIYOSHI KIKAI

  GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.[Features]· The hex shaft and sleeve can be cut at any position.· Cannot be used in sliding part while rotating.· When using as a slide unit, the NX slide unit should also be considered.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	11 ～ 54	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 613,483 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJD Type

  MIYOSHI KIKAI

  [Features]· With total hardening treatment for increased fatigue strength.· Additional machining cannot be performed on the hardened product.· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.· With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	49.5 ～ 195	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	380 ～ 1400	-	-	-

  From: 1,530,084 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model MM Model

  MIYOSHI KIKAI

  High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  1 ～ 1.5	-	-	2 ～ 3	9 ～ 12	Small	Standard	Standard Type	-	Stainless Steel ～ Steel	-	-	-	-	-

  From: 1,422,458 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Shaft Type, Bearing Type, KL Type, KF Type, KFD Type

  MIYOSHI KIKAI

  [Features]·Universal joint for light torque and high speed. ·Flange is not included.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	-	-	36 ～ 118	72 ～ 326	-	Standard	Shaft Type	-	-	-	-	-	-	-

  From: 4,414,371 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Slide SPSS Series

  MIYOSHI KIKAI

  SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.[Features]· Please note the effective spline size for sleeve and shaft cutting.· Use on the sliding part during rotation.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 25	-	-	6 ～ 22	-	-	Standard	Shaft Type	-	Stainless Steel	-	-	-	-	-

  From: 1,617,046 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, H-GX type

  MIYOSHI KIKAI

  The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	131~250 ～ 517~685	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 5,253,002 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

  MIYOSHI KIKAI

  [Features]·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	16 ～ 58	136.5~244 ～ 444~1095	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,401,403 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Power Type With Spline Shaft B-PS Series

  MIYOSHI KIKAI

  [Features]· P series are short-lead, easy order type.· Comprising of 2 standard joints (SPS, and join slide SPA).· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).· When setting, please ensure symmetry of left / right joint assembly.· Please note, if set incorrectly, output shaft speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  20 ～ 60	-	-	40 ～ 120	324~806 ～ 760~1312	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 10,025,616 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Shaft Compact Design SF Type (Flexible Shaft)

  SHOWA SPRING

  Low power / high speed can be changed for transmission freely in the desired direction.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	0.05~1.00 ～ 1.01~3.00	-	-	150 ～ 300	-	Standard	Flexible Type	-	Steel	0.392 ～ 1.862	-	-	-	-

  From: 736,623 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)

  SHOWA SPRING

  OILES metal (bushing) is used for the bearing.Basically for manual rotation (remote control).[Features]・ The structure other than the inner shaft is exactly the same as the DS type, so its cost is low and it is durable・ Allowable transmission torque drops only to 80% even when rotating counterclockwise

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	1.01~3.00	-	32	-	High Accuracy ～ Vibration Insulation	Standard	Flexible Type	< 100	Steel	2.94	100	-	4,520	180

  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Precision S Model

  MIYOSHI KIKAI

  Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	34 ～ 220	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 2001~4000	Steel	-	280 ～ 2100	-	-	-

  From: 1,355,081 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Precision Type D Model

  MIYOSHI KIKAI

  [Features]· Spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	50 ～ 340	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	200 ～ 1500	-	-	-

  From: 2,933,890 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Strong Type BD Series

  MIYOSHI KIKAI

  [Features]· High torque normal use.· Material: S45C· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	75 ～ 485	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	160 ～ 1300	-	-	-

  From: 1,332,270 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, KD Model

  MIYOSHI KIKAI

  [Features]·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	96 ～ 275	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	730 ～ 2200	-	-	-

  From: 5,822,112 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Corrosion Resistant Type HSD/BSD

  MIYOSHI KIKAI

  [Features]· Dry lubrication treatment for wear resistance (HSD-16 and higher)· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 60	65 ～ 275	-	Standard	Standard Type	100~ 300 ～ 301~1000	Stainless Steel	-	150 ～ 640	-	-	-

  From: 2,359,080 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, S-GX type

  MIYOSHI KIKAI

  [Features]·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 30	-	-	18 ～ 58	132~245 ～ 397~599	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 6,197,453 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Reinforced B-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]· Shaft can be freely cut at any point.· Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	162~270 ～ 553~711	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,090,478 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bearing K-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]· Comprises 2 standard joints and joint slide (GXS, GXA).· Joint and join slide are set with spring pin.· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.· Please note, if set incorrectly, output wheel speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	194~309 ～ 546~711	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 9,810,602 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft joint, precise type H-P

  MIYOSHI KIKAI

  Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	148.5~252 ～ 530~1164	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,241,976 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wheel attached type spline wheel attached joint strong type B-P type

  MIYOSHI KIKAI

  [Features]·Joints with hexagonal shafts and intermediate shafts can be cut freely·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	168.5~266.5 ～ 556~1185	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,242,358 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	130.5~238 ～ 444~1094	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,668,263 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft attached type Joint with spline shaft Bearing type K-P model

  MIYOSHI KIKAI

  Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	219~450 ～ 556~1188.5	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 9,330,212 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft type joint, stainless type HS-P

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SUS304.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 20	-	-	12.5 ～ 40	148.5~252 ～ 335~842	-	Standard	Shaft Type	-	Stainless Steel	-	-	-	-	-

  From: 7,966,749 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	SUNGIL	MISUMI	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SAKAI MANUFACTURING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIKI PULLEY	MIYOSHI KIKAI	MIGHTY	MIYOSHI KIKAI	MIGHTY	MIGHTY	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI
Product SeriesDòng sản phẩm	Universal Joints - Set Pin	Flexible Coupling (SFC Series)	Universal Joints - Set Keyway / Tapped	Cross Joint Coupling (SCJ Series)	Join Slide SPS Series	Standard Type Wear-Resistant HJ Series	Standard Type, Power Type B Series	Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model	Precision Shaft Fitting, Correctable, UA-C Series	Standard Bearing Model, K Model	Standard Type Corrosion Resistant HS Series/BS Series/HSS Series	Paraflex CPE· CPU Model	Standard Miniature Model, M Model	Plastic / Universal / Joint MCM Series	Standard Type, Precision Type H Series	Plastic Universal Joint, MC Series	Large plastic universal joint MD series	Standard Type, Non Magnetic Corrosion Resistant Type - BR Type	Join Slide GX Series	Standard Type Wear-Resistant HJD Type	Standard Miniature Model MM Model	Shaft Type, Bearing Type, KL Type, KF Type, KFD Type	Joint Slide SPSS Series	Type with shaft, joint with hexagonal shaft, precision type, H-GX type	With Shaft Model Joints with Spline Shaft Accurate Model S-P Model	Joint Power Type With Spline Shaft B-PS Series	Flexible Shaft Compact Design SF Type (Flexible Shaft)	Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)	Standard Type Precision S Model	Standard Precision Type D Model	Standard Type, Strong Type BD Series	Standard Bearing Model, KD Model	Standard Corrosion Resistant Type HSD/BSD	Type with shaft, joint with hexagonal shaft, precision type, S-GX type	Reinforced B-GX Type of Hexagonal Shaft Joint	Bearing K-GX Type of Hexagonal Shaft Joint	Shaft type spline, shaft joint, precise type H-P	Wheel attached type spline wheel attached joint strong type B-P type	With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model	Shaft attached type Joint with spline shaft Bearing type K-P model	Shaft type spline, shaft type joint, stainless type HS-P
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D				2D / 3D			2D		2D		2D	2D		2D			2D	2D
From	133,871 VND Special Price On Sale Till 31/03/2025	472,650 VND	133,871 VND	739,164 VND	595,218 VND	844,910 VND	737,496 VND	3,900,359 VND	907,270 VND	2,904,183 VND	1,263,400 VND	1,226,803 VND	922,102 VND	956,200 VND	1,210,556 VND	314,861 VND	1,411,821 VND	1,523,510 VND	613,483 VND	1,530,084 VND	1,422,458 VND	4,414,371 VND	1,617,046 VND	5,253,002 VND	4,401,403 VND	10,025,616 VND	736,623 VND		1,355,081 VND	2,933,890 VND	1,332,270 VND	5,822,112 VND	2,359,080 VND	6,197,453 VND	4,090,478 VND	9,810,602 VND	4,241,976 VND	3,242,358 VND	3,668,263 VND	9,330,212 VND	7,966,749 VND
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	Same day or more	5 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	17 Day(s) or more	7 Day(s) or more	7 Day(s) or more	17 Day(s) or more	11 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	17 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	6 ～ 30	4 ～ 16	8 ～ 30	3 ～ 15	5 ～ 38	6 ～ 30	6 ～ 60	6 ～ 30	3 ～ 20	10 ～ 30	6 ～ 60	3 ～ 22	2 ～ 5.5	2 ～ 10	6 ～ 30	3 ～ 10	8 ～ 20	6 ～ 25	6 ～ 30	6 ～ 30	1 ～ 1.5	-	6 ～ 25	6 ～ 30	6 ～ 30	20 ～ 60	-	-	6 ～ 60	6 ～ 60	6 ～ 60	10 ～ 30	6 ～ 30	8 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 20
Allowable Torque Range(N•m)	5.01~10.00 ～ 100 < 500	1.01~3.00	20.01~50.00 ～ 50.01~100.00	0.05~1.00 ～ 3.01~5.00	-	-	-	-	0.05~1.00 ～ 10.01~20.00	-	-	0.05~1.00 ～ 20.01~50.00	-	0.05~1.00 ～ 1.01~3.00	-	0.05~1.00 ～ 1.01~3.00	1.01~3.00 ～ 10.01~20.00	-	-	-	-	-	-	-	-	-	0.05~1.00 ～ 1.01~3.00	1.01~3.00	-	-	-	-	-	-	-	-	-	-	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	4 ～ 16	-	3 ～ 15	-	-	-	-	3 ～ 20	-	-	3 ～ 22	-	2 ～ 10	-	3 ～ 10	8 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Outer Dia. A(Ø)	12 ～ 51	29 ～ 54	19 ～ 36	15 ～ 40	5 ～ 35	12 ～ 51	12 ～ 120	12 ～ 51	15 ～ 55	20 ～ 60	12.5 ～ 120	19 ～ 46	6 ～ 10	7.1 ～ 17.5	12.5 ～ 57	7.1 ～ 17.5	23 ～ 36.5	16 ～ 50	11 ～ 54	12 ～ 51	2 ～ 3	36 ～ 118	6 ～ 22	12.5 ～ 57	16 ～ 58	40 ～ 120	-	32	16 ～ 115	16 ～ 115	12 ～ 120	20 ～ 60	12.5 ～ 60	18 ～ 58	12 ～ 60	20 ～ 60	12.5 ～ 57	12 ～ 60	12 ～ 51	20 ～ 60	12.5 ～ 40
Overall Length W(mm)	31 ～ 139	28 ～ 58	42 ～ 139	22.4 ～ 51	-	31 ～ 122	50 ～ 300	105~232 ～ 399~599	18 ～ 58	62 ～ 178	40 ～ 300	19.4 ～ 54	15 ～ 30	27.2 ～ 89.8	40 ～ 165	19.1 ～ 75.5	62 ～ 86	40 ～ 108	-	49.5 ～ 195	9 ～ 12	72 ～ 326	-	131~250 ～ 517~685	136.5~244 ～ 444~1095	324~806 ～ 760~1312	150 ～ 300	-	34 ～ 220	50 ～ 340	75 ～ 485	96 ～ 275	65 ～ 275	132~245 ～ 397~599	162~270 ～ 553~711	194~309 ～ 546~711	148.5~252 ～ 530~1164	168.5~266.5 ～ 556~1185	130.5~238 ～ 444~1094	219~450 ～ 556~1188.5	148.5~252 ～ 335~842
Features	-	-	-	Heat Resistant ～ Small	-	-	High Torque	-	High Torsional Rigidity ～ Low Moment of Inertia	-	-	High Accuracy ～ Small	Small	High Accuracy ～ No Backlash	High Accuracy ～ High Durability	High Accuracy ～ No Backlash	High Accuracy ～ Small	-	-	-	Small	-	-	High Accuracy ～ High Durability	High Accuracy ～ Small	High Torque	-	High Accuracy ～ Vibration Insulation	High Accuracy ～ Small	High Accuracy ～ Small	High Torque	-	-	High Accuracy ～ Small	High Torque	-	High Accuracy ～ High Durability	High Torque	-	-	-
Application	Standard	-	Standard	Servo Motor	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard / Servo Motor / Stepping Motor	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Type	Others / Standard Type	-	Others / Standard Type	Standard Type	Shaft Type	Standard Type	Standard Type	Shaft Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Shaft Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Flexible Type	Flexible Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type
Max. Rotational Speed Range(r/min)	-	2001~4000	-	2001~4000 ～ 10001~78000	-	301~1000 ～ 1001~2000	100~ 300 ～ 1001~2000	-	4001~10000	301~1000 ～ 2001~4000	< 100 ～ 301~1000	2001~4000 ～ 4001~10000	301~1000	4001~10000	301~1000 ～ 1001~2000	4001~10000	-	-	-	301~1000 ～ 1001~2000	-	-	-	-	-	-	-	< 100	100~ 300 ～ 2001~4000	100~ 300 ～ 1001~2000	100~ 300 ～ 1001~2000	301~1000 ～ 2001~4000	100~ 300 ～ 301~1000	-	-	-	-	-	-	-	-
Body Material	Steel	Steel	Steel	Aluminum ～ Aluminum Alloy	Steel	Steel	Steel	Steel	Aluminum	Steel	Stainless Steel	Aluminum	Steel	Plastic	Steel	Plastic	Plastic	Alloy	Steel	Steel	Stainless Steel ～ Steel	-	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel
Allowable Torque(N•m)	5.3 ～ 495	0.12 ～ 1.5	20.1 ～ 175	0.25 ～ 5	-	-	-	-	0.25 ～ 20	-	-	0.4 ～ 25	-	0.08 ～ 1.6	-	0.08 ～ 1.6	2.8 ～ 10.7	-	-	-	-	-	-	-	-	-	0.392 ～ 1.862	2.94	-	-	-	-	-	-	-	-	-	-	-	-	-
Max. Rotational Speed(r/min)	-	3000	-	3500 ～ 21000	-	500 ～ 1800	220 ～ 1700	-	6000	950 ～ 2500	90 ～ 800	3000 ～ 6000	700 ～ 1000	10000	510 ～ 2000	10000	-	-	-	380 ～ 1400	-	-	-	-	-	-	-	100	280 ～ 2100	200 ～ 1500	160 ～ 1300	730 ～ 2200	150 ～ 640	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment Range(mm)	-	1.1~3.0	-	0.21~0.40 ～ 0.41~1.0	-	-	-	-	0.02~0.2	-	-	0.02~0.2 ～ 0.41~1.0	-	5.1~100	-	5.1~100	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	2 ～ 3	-	0.3 ～ 0.5	-	-	-	-	0.2	-	-	0.2 ～ 0.5	-	5.6 ～ 15.5	-	5.6 ～ 15.5	-	-	-	-	-	-	-	-	-	-	-	4,520	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	10 ～ 12	-	3 ～ 7	-	-	-	-	1	-	-	1 ～ 4	-	45 ～ 90	-	45 ～ 90	40	-	-	-	-	-	-	-	-	-	-	180	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…