(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
This is a standardized series so that the spring constant is constant for the same diameter.
[Features]
· UM type, Maximum allowable deflection 28-35%
· UH type, Maximum allowable deflection 20-30%
Part Number |
UM16-80 UH16-80 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
TypeD-L | ||||||||
UM 4- | 5* | 0.4 | 2.2 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 4.9 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.55 | 7.5 | 5.25 | 10.3 | {1.05} | |||
20 | 0.6 | 11.1 | 7 | 13.7 | {1.4 } | |||
25 | 0.6 | 11.1 | 8.75 | 17.2 | {1.75} | |||
30 | 0.65 | 16.3 | 10.5 | 20.6 | {2.1 } | |||
UM 5- | 5* | 0.45 | 2.25 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 3.13 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.65 | 8.45 | 5.25 | 10.3 | {1.05} | |||
20 | 0.65 | 8.45 | 7 | 13.7 | {1.4 } | |||
25 | 0.7 | 11.9 | 8.75 | 17.2 | {1.75} | |||
30 | 0.7 | 11.9 | 10.5 | 20.6 | {2.1 } | |||
35 | 0.75 | 16.5 | 12.25 | 24.0 | {2.45} | |||
40 | 0.8 | 23.2 | 14 | 27.5 | {2.8 } | |||
45 | 0.8 | 23.2 | 15.75 | 30.9 | {3.15} | |||
50 | 0.85 | 31.45 | 17.5 | 34.3 | {3.5 } | |||
UM 6- | 5* | 0.55 | 2.7 | 1.7 | 4.9 | {0.5 } | 35 | |
10 | 0.7 | 5.6 | 3.5 | 10.8 | {1.1 } | |||
15 | 0.75 | 7.4 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.75 | 7.4 | 7 | 20.6 | {2.1 } | |||
25 | 0.85 | 12.8 | 8.7 | 25.5 | {2.6 } | |||
30 | 0.85 | 12.8 | 10.5 | 31.4 | {3.2 } | |||
35 | 0.9 | 16.7 | 12.2 | 36.3 | {3.7 } | |||
40 | 0.9 | 16.8 | 14 | 41.2 | {4.2 } | |||
45 | 1.0 | 27.8 | 15.75 | 46.1 | {4.7 } | |||
50 | 1.0 | 28.0 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.0 | 28.0 | 18 | 53.0 | {5.4 } | 30 | ||
70 | 1.1 | 46.2 | 19.6 | 58.8 | {6 } | 28 | ||
UM 8- | 10 | 0.85 | 6.4 | 3.5 | 10.8 | {1.1 } | 35 | |
15 | 0.9 | 7.9 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.9 | 7.9 | 7 | 20.6 | {2.1 } | |||
25 | 0.9 | 7.9 | 8.7 | 25.5 | {2.6 } | |||
30 | 1.0 | 12.0 | 10.5 | 31.4 | {3.2 } | |||
35 | 1.0 | 12.0 | 12.2 | 36.3 | {3.7 } | |||
40 | 1.1 | 18.7 | 14 | 41.2 | {4.2 } | |||
45 | 1.1 | 18.7 | 15.75 | 46.1 | {4.7 } | |||
50 | 1.1 | 18.7 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.2 | 28.2 | 21 | 61.8 | {6.3 } | |||
70 | 1.3 | 42.0 | 24.5 | 72.6 | {7.4 } | |||
UM10- | 10 | 0.9 | 5.2 | 3.5 | 10.8 | {1.1} | 35 | |
15 | 1.0 | 7.3 | 5.2 | 15.7 | {1.6} | |||
20 | 1.0 | 7.3 | 7 | 20.6 | {2.1} | |||
25 | 1.1 | 10.5 | 8.7 | 25.5 | {2.6} | |||
30 | 1.1 | 10.5 | 10.5 | 31.4 | {3.2} | |||
35 | 1.2 | 15 | 12.2 | 36.3 | {3.7} | |||
40 | 1.2 | 15 | 14 | 41.2 | {4.2} | |||
45 | 1.3 | 21.8 | 15.75 | 46.1 | {4.7} | |||
50 | 1.3 | 21.8 | 17.5 | 52.0 | {5.3} | |||
60 | 1.4 | 30.8 | 21 | 61.8 | {6.3} | |||
70 | 1.4 | 30.8 | 24.5 | 72.6 | {7.4} | |||
UM13- | 15 | 1.2 | 8.4 | 5.2 | 15.7 | {1.6} | 35 | |
20 | 1.3 | 11.1 | 7 | 20.6 | {2.1} | |||
25 | 1.3 | 11.1 | 8.7 | 25.5 | {2.6} | |||
30 | 1.4 | 15.1 | 10.5 | 31.4 | {3.2} | |||
35 | 1.4 | 15.1 | 12.2 | 36.3 | {3.7} | |||
40 | 1.4 | 15.1 | 14 | 41.2 | {4.2} | |||
45 | 1.4 | 15.1 | 15.75 | 46.1 | {4.7} | |||
50 | 1.4 | 15.1 | 17.5 | 52.0 | {5.3} | |||
60 | 1.6 | 27.2 | 21 | 61.8 | {6.3} | |||
70 | 1.6 | 27.2 | 24.5 | 72.6 | {7.4} | |||
80 | 1.7 | 36.2 | 28 | 82.4 | {8.4} | |||
UM16- | 15 | 1.4 | 9.6 | 5.2 | 15.7 | { 1.6} | 35 | |
20 | 1.5 | 12.4 | 7 | 20.6 | { 2.1} | |||
25 | 1.5 | 12.4 | 8.7 | 25.5 | { 2.6} | |||
30 | 1.5 | 12.4 | 10.5 | 31.4 | { 3.2} | |||
35 | 1.6 | 15.6 | 12.2 | 36.3 | { 3.7} | |||
40 | 1.6 | 15.6 | 14 | 41.2 | { 4.2} | |||
45 | 1.7 | 20.4 | 15.75 | 46.1 | { 4.7} | |||
50 | 1.7 | 20.4 | 17.5 | 52.0 | { 5.3} | |||
60 | 1.8 | 26.1 | 21 | 61.8 | { 6.3} | |||
70 | 1.8 | 26.1 | 24.5 | 72.6 | { 7.4} | |||
80 | 1.8 | 26.1 | 28 | 82.4 | { 8.4} | |||
UM20- | 20 | 1.8 | 11.3 | 7 | 34.3 | { 3.5} | 35 | |
25 | 1.9 | 13.3 | 8.75 | 43.1 | { 4.4} | |||
30 | 1.9 | 13.3 | 10.5 | 52.0 | { 5.3} | |||
35 | 2 | 16 | 12.25 | 59.8 | { 6.1} | |||
40 | 2 | 16 | 14 | 68.6 | { 7 } | |||
45 | 2.2 | 23.7 | 15.75 | 77.5 | { 7.9} | |||
50 | 2.2 | 23.7 | 17.5 | 86.3 | { 8.8} | |||
60 | 2.2 | 23.7 | 21 | 103.0 | {10.5} | |||
70 | 2.4 | 34.8 | 24.5 | 120.6 | {12.3} | |||
80 | 2.4 | 34.8 | 28 | 137.3 | {14 } |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 4- | 5* | 0.45 | 2.7 | 1.5 | 4.4 | { 0.45} | 30 | |
10* | 0.5 | 3.8 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 8.1 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.65 | 11.7 | 6 | 17.6 | { 1.8 } | |||
25 | 0.7 | 16.8 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.7 | 16.8 | 9 | 26.5 | { 2.7 } | |||
UH 5- | 5* | 0.55 | 3.3 | 1.5 | 4.4 | { 0.45} | 30 | |
10 | 0.6 | 4.65 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 4.65 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.75 | 11.81 | 6 | 17.6 | { 1.8 } | |||
25 | 0.75 | 11.81 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.8 | 16 | 9 | 26.5 | { 2.7 } | |||
35 | 0.85 | 21.68 | 10.5 | 30.9 | { 3.15} | |||
40 | 0.85 | 21.68 | 12 | 35.3 | { 3.6 } | |||
45 | 0.9 | 28.8 | 13.5 | 39.7 | { 4.05} | |||
UH 6- | 5* | 0.65 | 3.2 | 1.5 | 8.8 | { 0.9 } | 30 | |
10 | 0.7 | 3.9 | 3 | 17.7 | { 1.8 } | |||
15 | 0.85 | 7.7 | 4.5 | 26.5 | { 2.7 } | |||
20 | 0.9 | 9.7 | 6 | 35.3 | { 3.6 } | |||
25 | 1.0 | 15.5 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.0 | 15.5 | 9 | 53.0 | { 5.4 } | |||
35 | 1.1 | 24.8 | 9.8 | 57.9 | { 5.9 } | 28 | ||
40 | 1.1 | 24.8 | 10 | 58.8 | { 6 } | 25 | ||
45 | 1.1 | 24.8 | 11.25 | 66.7 | { 6.8 } | |||
50 | 1.2 | 39.0 | 10 | 58.8 | { 6 } | 20 | ||
60 | 1.2 | 39.0 | 13.8 | 82.4 | { 8.4 } | 23 | ||
70 | 1.2 | 39.0 | 14.7 | 88.3 | { 9 } | 21 | ||
UH 8- | 10 | 0.9 | 5.3 | 3 | 17.7 | { 1.8 } | 30 | |
15 | 0.9 | 5.3 | 4.5 | 26.5 | { 2.7 } | |||
20 | 1.1 | 11 | 6 | 35.3 | { 3.6 } | |||
25 | 1.1 | 11 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.2 | 15.9 | 9 | 53.0 | { 5.4 } | |||
35 | 1.2 | 15.9 | 10.5 | 61.8 | { 6.3 } | |||
40 | 1.3 | 23.1 | 12 | 70.6 | { 7.2 } | |||
45 | 1.3 | 23.1 | 13.5 | 79.4 | { 8.1 } | |||
50 | 1.4 | 33.3 | 15 | 88.3 | { 9 } | |||
60 | 1.4 | 33.3 | 18 | 105.9 | {10.8 } | |||
70 | 1.5 | 48.0 | 18.9 | 111.8 | {11.4 } | 27 | ||
UH 10- | 10 | 1.1 | 6.9 | 3 | 17.7 | { 1.8} | 30 | |
15 | 1.1 | 6.9 | 4.5 | 26.5 | { 2.7} | |||
20 | 1.2 | 9.3 | 6 | 35.3 | { 3.6} | |||
25 | 1.2 | 9.3 | 7.5 | 44.1 | { 4.5} | |||
30 | 1.3 | 12.7 | 9 | 53.0 | { 5.4} | |||
35 | 1.4 | 17.5 | 10.5 | 61.8 | { 6.3} | |||
40 | 1.4 | 17.5 | 12 | 70.6 | { 7.2} | |||
45 | 1.5 | 23.8 | 13.5 | 79.4 | { 8.1} | |||
50 | 1.5 | 23.8 | 15 | 88.3 | { 9 } | |||
60 | 1.6 | 32.4 | 18 | 105.9 | {10.8} | |||
70 | 1.7 | 44.2 | 21 | 123.6 | {12.6} | |||
UH 13- | 15 | 1.5 | 9.2 | 4.5 | 44.1 | { 4.5} | 30 | |
20 | 1.5 | 9.2 | 6 | 58.8 | { 6 } | |||
25 | 1.5 | 9.2 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.8 | 18 | 9 | 88.3 | { 9 } | |||
35 | 1.8 | 18 | 10.5 | 103.0 | {10.5} | |||
40 | 1.8 | 18 | 12 | 117.7 | {12 } | |||
45 | 1.8 | 18 | 13.5 | 132.4 | {13.5} | |||
50 | 2.0 | 28.5 | 15 | 147.0 | {15 } | |||
60 | 2.1 | 36 | 18 | 176.5 | {18 } | |||
70 | 2.2 | 45.1 | 21 | 205.9 | {21 } | |||
80 | 2.2 | 45.1 | 20 | 196.1 | {20 } | 25 | ||
UH 16- | 15 | 1.7 | 9.6 | 4.5 | 44.1 | { 4.5} | 30 | |
20 | 1.9 | 14 | 6 | 58.8 | { 6 } | |||
25 | 1.9 | 14 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.9 | 14 | 9 | 88.3 | { 9 } | |||
35 | 1.9 | 14 | 10.5 | 103.0 | {10.5} | |||
40 | 2.2 | 25.1 | 12 | 117.7 | {12 } | |||
45 | 2.2 | 25.1 | 13.5 | 132.4 | {13.5} | |||
50 | 2.2 | 25.1 | 15 | 147.1 | {15 } | |||
60 | 2.3 | 30.5 | 18 | 176.5 | {18 } | |||
70 | 2.5 | 44.7 | 21 | 205.9 | {21 } | |||
80 | 2.5 | 44.7 | 24 | 235.4 | {24 } | |||
UH 20- | 25 | 2.3 | 13.8 | 7.5 | 110.8 | {11.3} | 30 | |
30 | 2.3 | 13.8 | 9 | 132.4 | {13.5} | |||
35 | 2.5 | 18.8 | 10.5 | 154.9 | {15.8} | |||
40 | 2.5 | 18.8 | 12 | 176.5 | {18 } | |||
45 | 2.8 | 29.4 | 13.5 | 199.1 | {20.3} | |||
50 | 2.8 | 29.4 | 15 | 220.6 | {22.5} | |||
60 | 3 | 40.5 | 18 | 264.8 | {27 } | |||
70 | 3 | 40.5 | 21 | 308.9 | {31.5} | |||
80 | 3.2 | 54.4 | 24 | 353.0 | { 36 } |
Type | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | |||||||||||||||||||
D | ||||||||||||||||||||||||||||
2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | ||||||||||||||||||||||||
3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | ||||||||||||||||||||||
4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | |||||||||||||||||||||||||
5 | ||||||||||||||||||||||||||||
6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | ||||||||||||||||||||||||
8 | ||||||||||||||||||||||||||||
10 | N/mm 0.2 {kgf/mm} {0.02} | |||||||||||||||||||||||||||
12 | ||||||||||||||||||||||||||||
13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | ||||||||||||||||||||||||||
14 | ||||||||||||||||||||||||||||
16 | ||||||||||||||||||||||||||||
20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | ||||||||||||||||||||
Fmax. | F=Lx70% | F=LxFa% | F=LxFa% | F=Lx45% | F=Lx40% | F=LxFa% | F=LxFa% | F=LxFa% | F=L×Fa% |
Part Number |
---|
UM5-35-LKC |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Free Length L (mm) | Outer Dia. D (or D1) (Ø) | Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm) | Spring Constant (N/mm) | Allowable Load (Configurable Range) (N) | Max. Load (N) | Wire Dia. (Ø) | End Surface Status | Solid Length (mm) | Tolerance Change | Allowable Deflection (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100,299 VND | 1 Piece(s) | Available | 8 Day(s) or more | 10 | 35 | 5 | 22.75 | 2 | 16.01~30.00 | 24 | 0.75 | With Grinding | 16.5 | LKC (with Tolerance Change) | 12.25 |
Loading...Tải…
Please check the type/dimensions/specifications of the part UM5-35-LKC in the Round Wire Coil Springs/Deflection 27%-30%/O.D. Referenced series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần UM5-35-LKC trong chuỗi Round Wire Coil Springs/Deflection 27%-30%/O.D. Referenced.
Part Number |
---|
UH10-15-LKC |
UH10-20 |
UH10-20-LKC |
UM5-40 |
UM5-40-LKC |
UM5-45 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Free Length L (mm) | Outer Dia. D (or D1) (Ø) | Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm) | Spring Constant (N/mm) | Allowable Load (Configurable Range) (N) | Max. Load (N) | Wire Dia. (Ø) | End Surface Status | Solid Length (mm) | Tolerance Change | Allowable Deflection (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
127,198 VND | 1 Piece(s) | Available | 8 Day(s) or more | 10 | 15 | 10 | 10.5 | 5.9 | 16.01~30.00 | 26.5 | 1.1 | With Grinding | 6.9 | LKC (with Tolerance Change) | 4.5 | |
75,276 VND | 1 Piece(s) | Available | Same day | 10 | 20 | 10 | 14 | 5.9 | 30.01~50.00 | 35.3 | 1.2 | With Grinding | 9.3 | - | 6 | |
127,198 VND | 1 Piece(s) | Available | 8 Day(s) or more | 10 | 20 | 10 | 14 | 5.9 | 30.01~50.00 | 35.3 | 1.2 | With Grinding | 9.3 | LKC (with Tolerance Change) | 6 | |
58,595 VND | 1 Piece(s) | Available | Same day | 10 | 40 | 5 | 26 | 2 | 16.01~30.00 | 27.5 | 0.8 | With Grinding | 23.2 | - | 14 | |
100,299 VND | 1 Piece(s) | Available | 8 Day(s) or more | 10 | 40 | 5 | 26 | 2 | 16.01~30.00 | 27.5 | 0.8 | With Grinding | 23.2 | LKC (with Tolerance Change) | 14 | |
58,595 VND | 1 Piece(s) | Available | Same day | 10 | 45 | 5 | 29.25 | 2 | 30.01~50.00 | 30.9 | 0.8 | With Grinding | 23.2 | - | 15.75 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy