(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Flexible Shaft Couplings（Page5）
Take advantage of the convenience of FREE SHIPPING and NO MINIMUM ORDER on couplings. If you have any doubts or require assistance in choosing the right product, our experts are readily available to provide.
|
Type
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
210 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
ADVANCED
· Small but strong coupling with excellent durability· Approximately twice the regular torque compared to ASJ/ASJU
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 3 ～ 20 3 ～ 20 12 ～ 38 14.4 ～ 39.7 Standard 1.01~3.00 ～ 20.01~50.00 High Durability ～ Small Angular Misalignment / Eccentricity / Axial Misalignment 2001~4000 ～ 4001~10000 Stainless Steel 2.5 ～ 50 0.6 0.3 ～ 0.6 Coupling Main Body 0.21~0.40 ～ 0.41~1.0 4000 ～ 10000 Aluminum Bronze - - From: 729,395 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ADVANCED
· The Strongest Oldham· Combination of stainless steel hubs and aluminum-bronze slider: All-metal Oldham coupling· The minimum clearance of the slider part is filled with ultra-high viscosity grease for preventing seizure and achieving zero backlash· Damage will not occur even with an impact torque that is 4 times greater than the allowable torque (FSPJU)
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 15 ～ 35 15 ～ 35 45 ～ 70 43.6 ～ 57 Standard / Servo Motor 20.01~50.00 ～ 100 < 500 High Torsional Rigidity Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Stainless Steel 50 ～ 160 0.2 ～ 0.5 0.8 ～ 1.6 Coupling Main Body 0.41~1.0 ～ 1.1~3.0 5000 ～ 10000 Aluminum Bronze - - From: 4,673,678 VND Days to Ship: Số ngày giao hàng: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KASCO
Domestic Coupling Kasco (kosa) is a product.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 3 ～ 28 3 ～ 32 22 ～ 80 15.4 ～ 89.9 Servo Motor / Stepping Motor - High Torque - - Aluminum Alloy 1.3 ～ 75 1 ～ 2 0.12 ～ 0.4 Coupling Main Body - 6000 ～ 12000 - Stainless Steel - From: 431,546 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High Torque Disk Coupling HDC-SA Clamping Screw Single Disk Type
JIT COUPLING
【Features】HDC-SA Type Coupling has a single type disk plate. Suitable for small space because of its short length. Small volume flow rate of the disk especially requires correct alignment of the two axes. The hub material is of high rigidity duralumin(AL 7075-6T), and the surface has hard anodizing treatment exhibiting high resistance to corrosion, oil, and chemicals. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 10 ～ 36 10 ～ 36 56 ～ 88 - Standard - - - - - - 0.5 0.03 - - - - Stainless Steel - From: 1,829,072 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Oldham Couplings - Spacers (for MFJ/MFJC)
MISUMI
[Features]·This is an Oldham type coupling for large diameters. ·It can be used as a maintenance product.
- Volume Discount
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham - - - - - - - Not Provided - - - - - Maintenance Components - - - - - From: 1,030,519 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Oldham Couplings - Super Short Clamping
MISUMI
This coupling has a larger allowable torque and a shorter overall length than conventional products.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 3 ～ 10 3 ～ 10 12 ～ 25 13.5 ～ 22.5 Standard 0.05~1.00 ～ 1.01~3.00 Low Moment of Inertia ～ Small Angular Misalignment / Eccentricity 4001~10000 ～ 10001~78000 Aluminum 0.3 ～ 1.6 1.5 0.3 ～ 1.2 Coupling Main Body 0.21~0.40 ～ 1.1~3.0 5000 ～ 12000 Polyacetal - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham - - 16 ～ 32 12 ～ 21 - - - Not Provided - Aluminum - - - Maintenance Components - - Polyacetal - - From: 267,874 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
MIKI PULLEY
Large type metal plate spring coupling.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc - - 152 ～ 262 101 ～ 391 Servo Motor 1000 < 5000 ～ 5000 < 10000 High Accuracy ～ Unfinished Shaft Bore Angular Misalignment / Eccentricity / Axial Misalignment 2001~4000 ～ 4001~10000 Steel 1000 ～ 8000 1 ～ 2 1.6 ～ 2.9 Coupling Main Body 1.1~3.0 3400 ～ 5900 - Stainless Steel - From: 15,409,241 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ISEL
No backlash in the direction of rotation. Divide structure for easy assembly.[Features]· Standardized 36 type models from shaft diameter ø5 to ø32.· By applying pressure to the resin part, there is no backlash.· High torsional rigidity.· Easy assembly structure
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 11 ～ 32 12 ～ 32 40 ～ 60 - Standard / Servo Motor / Stepping Motor 10.01~20.00 ～ 20.01~50.00 High Torsional Rigidity ～ No Backlash Angular Misalignment / Eccentricity 4001~10000 Aluminum 17.65 ～ 44.13 0.5 ～ 1 0.15 ～ 0.2 Coupling Main Body 0.02~0.2 5000 ～ 8000 - - - From: 2,797,549 VND Days to Ship: Số ngày giao hàng: 18 Day(s) or more
18 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NABEYA BI-TECH
Flexible shaft coupling that absorbs shock, vibration, and misalignment in four directions: circumferential direction, eccentricity, deflection angle, and end play. Can be used as is, instead of the conventional shaft fitting, without complete design change of equipment. No need for lubrication, sleeve has a long life. Maintenance-free.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham - - 53 ～ 161 52 ～ 129 Standard 5.01~10.00 ～ 50.01~100.00 Vibration Insulation Angular Misalignment / Eccentricity 2001~4000 ～ 4001~10000 - 6.9 ～ 210 1 0.25 ～ 0.64 Coupling Main Body 0.21~0.40 ～ 0.41~1.0 3750 ～ 9200 - - - From: 621,425 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MOP Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (PEEK)
NABEYA BI-TECH
Micro-volume out gas. Clean. Large allowable misalignment.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 5 ～ 14 5 ～ 14 - 22.1 ～ 33.3 Standard / Stepping Motor 0.05~1.00 ～ 1.01~3.00 Clean Environment ～ Vacuum Environment Angular Misalignment / Eccentricity 10001~78000 Aluminum 0.7 ～ 2.8 2 1.3 ～ 2 Coupling Main Body 1.1~3.0 19000 ～ 31000 PEEK - - From: 2,028,985 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Bellows coupling series NB type phosphor bronze product
NIHON MINIATURE
Low cost bellows coupling, using phosphor bronze for bellows, and brass for boss part. Nickel plating treatment.[Features]· NB series bellows coupling is made with phosphor bronze (PBP3-0), with brass bracket (BsBM) used, both fixed with solder.· No backlash, low inertia, high torsional rigidity, compact coupling with flexibility.· Model number is no. 4, with shaft diameter from 2 mm to 10 mm, and always in stock with all shaft diameter combinations (inner diameter tapping processed).
- CAD ：
- 2D
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Bellows 2 ～ 10 2 ～ 10 14 ～ 19 22 ～ 28 Standard 0.05~1.00 High Torsional Rigidity ～ Small Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Alloy 0.147 ～ 0.343 1.5 0.1 ～ 0.2 Coupling Main Body 0.02~0.2 5000 - - Phosphor Bronze From: 587,356 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Bellows coupling series Collett type stainless steel
NIHON MINIATURE
Bellows, hub part (boss part) use stainless steel. Spring steel used for shaft fastening bracket. Can be fixed without damage to the shaft.[Features]· The performance is the same as the general type, but it is easier to install and remove without damaging the shaft.· Suitable especially when the frequency of forward and reverse rotation is high, or when the angular rotation acceleration is great.· Material is the same as general type, bellows are stainless steel (SUS304L), fittings use stainless steel (SUS303), and clamp is spring copper. (Surface treated)· Shaft diameters are 5 mm to 8 mm, and always in stock.
- CAD ：
- 2D
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Bellows 5 ～ 8 5 ～ 8 18 ～ 20 25 Standard 0.05~1.00 High Torsional Rigidity ～ Small Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Stainless Steel 0.7845 2 0.1 Coupling Main Body 0.02~0.2 10000 - - Stainless Steel From: 1,203,530 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NIHON MINIATURE
Low cost coupling that uses zinc die casting for the hub part (boss part), and urethane rubber for the sleeve.[Features]· MF coupling consists of one rubber sleeve and two hubs made of zinc die-cast (surface treated).· Sleeves and hubs have splines on inner and outer diameters, respectively, which engage and transmit torque.· Fastening to shaft is by set screw.
- CAD ：
- 2D
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Others 3 ～ 18 3 ～ 18 20 ～ 40 24 ～ 40 Standard 0.05~1.00 ～ 3.01~5.00 Small ～ Vibration Insulation Angular Misalignment / Eccentricity 2001~4000 Alloy 0.392 ～ 3.923 1 0.15 ～ 0.35 Coupling Main Body 0.02~0.2 ～ 0.21~0.40 3000 Polyurethane - - From: 347,194 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Axial Fitting-Spring Type, LCD-T7 Series
SAKAI MANUFACTURING
[Features]· Due to taper clamp specification, shaft fastening is possible with light torque.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 18 ～ 35 25 ～ 40 80 ～ 100 98 ～ 118 Standard / Servo Motor / Stepping Motor 50.01~100.00 ～ 100 < 500 - Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Steel 80 ～ 250 1 0.33 ～ 0.47 Coupling Main Body 0.21~0.40 ～ 0.41~1.0 10000 - Stainless Steel - From: 4,150,979 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Axial Fitting-Spring Type, LCS-T7 Series
SAKAI MANUFACTURING
[Features]LCS-T7 series precision shaft fitting leaf spring type that achieves high stiffness and high torque rotation transmission by integrating the flexible part and the shaft coupling part. [Applications]It can be used for servo motors, pulse motors, etc.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 15 ～ 35 19 ～ 38 65 ～ 100 67.5 ～ 91 Standard / Servo Motor / Stepping Motor 20.01~50.00 ～ 100 < 500 - Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Steel 40 ～ 250 1 0.02 Coupling Main Body 0.02~0.2 10000 - Stainless Steel - From: 2,387,192 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Axial Fitting Plate-Spring Type, LCS-M Series
SAKAI MANUFACTURING
Shaft fastening with combination of taper shaft and bolt clamp[Features]· 1/10 taper shaft specification, and bolt clamp specification shaft fastening are combined
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 12 ～ 35 11 ～ 16 55 ～ 90 44.8 ～ 79.5 Standard / Servo Motor / Stepping Motor 20.01~50.00 ～ 100 < 500 - Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Steel 25 ～ 180 1 0.02 Coupling Main Body 0.02~0.2 10000 - Stainless Steel - From: 1,753,164 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Axial Fitting Plate-Spring Type, TAD-C Series
SAKAI MANUFACTURING
Lightweight super Duralumin, high rigidity type.[Features]· Lightweight super Duralumin, improving torque transmission with high rigidity body, and original leaf spring for both performance up and cost down.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 10 ～ 25 12 ～ 32 48 ～ 65 56.5 ～ 72 Standard / Servo Motor / Stepping Motor 20.01~50.00 ～ 50.01~100.00 High Accuracy ～ Low Moment of Inertia Angular Misalignment / Eccentricity / Axial Misalignment 4001~10000 Aluminum 35 ～ 80 1 0.26 ～ 0.31 Coupling Main Body 0.21~0.40 10000 - Stainless Steel - From: 2,172,964 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KAYSEVEN
Compact, simple structure, with easy to absorb eccentricity and centering. Widely used in robots, resin molding materials, conveying equipment, printing machines, machine tools, and pumps etc.[Features]· Compact and simple structure.· Like the MD series, it consists of three parts, the hub parts and an intermediate torque transmission part.· Oldham type coupling absorbs eccentric misalignment.· Dial gauge is not necessary for centering work at installation.· Visual observation is sufficient.· The intermediate torque transmission part is made of resin, and so does not require lubricant.· No reactive force due to misalignment, contributing to energy conservation, with assembly and installation easy.· Simple structure, and even in the event of damage to the intermediate transmission part, power transmission is possible.· Thermally and electrically insulated by the intermediate transmission part.· Friction joint employed for fastening to shaft.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Jaw - - 56 ～ 150 20 ～ 108 Standard 20.01~50.00 ～ 100 < 500 Small Not Provided 4001~10000 Steel / Plastic 44 ～ 450 - - Coupling Main Body - 6000 ～ 10000 - - - From: 186,795 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keiflex coupling L type (spacer type)
KAYSEVEN
High torque transmission, energy saving design, large allowable misalignment, no backlash product. Can be used where distance between the devices.[Features]· Can be used where distance between the devices.· For maintenance, remove the spacer for easier work without cutting-off driver and driven unit.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc - - 58 ～ 346 72 ～ 607 Standard 10.01~20.00 ～ 20000 < 50000 High Torque ～ No Backlash Angular Misalignment / Eccentricity / Axial Misalignment - Steel 10 ～ 20000 0.7 ～ 1 0.55 ～ 2.1 Coupling Main Body - - - - - From: 2,901,535 VND Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
K Flex Couplings A Model (One-side Adapter Hub Model)
KAYSEVEN
High torque transmission, energy saving design, large allowable misalignment, no backlash product. Recommended for pairing NC manufacturing machinery etc. with servo motors.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc - - 81 ～ 276 52.8 ～ 209.2 Standard 100 < 500 ～ 5000 < 10000 High Torque ～ No Backlash Angular Misalignment / Axial Misalignment 4001~10000 ～ 10001~78000 Steel 100 ～ 7000 0.7 ～ 1 - Coupling Main Body - 3100 ～ 20000 - - - From: 2,421,862 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ADVANCED
· Compared to UJ, the slit part is longer and the allowable misalignment amount when using alone is improved· Single item easily absorbs curves and misalignment· Smooth rotary transmission in a compact design· For rotation transmission parts that require electric insulation
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 1.5 ～ 12 1.5 ～ 12 9 ～ 28 11.4 ～ 34.4 Standard 0.05~1.00 ～ 1.01~3.00 No Backlash Angular Misalignment / Eccentricity / Axial Misalignment 2001~4000 ～ 10001~78000 Plastic 0.16 ～ 3 3 ～ 5 0.2 ～ 0.5 Coupling Main Body 0.02~0.2 ～ 0.41~1.0 4000 ～ 12000 - Glass Fiber Reinforced Resin - From: 227,393 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ADVANCED
· A combination of aluminum hub and polyacetal slider· The high-precision slider groove provides zero backlash in light press fitting and also supports servo systems· Sliders can also be manufactured from chemical-resistant or heat-resistant grade materials
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 14 ～ 38 14 ～ 38 44 ～ 69 46 ～ 77 Standard / Servo Motor 20.01~50.00 ～ 50.01~100.00 Clean Environment ～ Vibration Insulation Angular Misalignment / Eccentricity 4001~10000 ～ 10001~78000 Aluminum 26 ～ 80 1.5 0.7 ～ 1.2 Coupling Main Body 0.41~1.0 ～ 1.1~3.0 6000 ～ 12000 Polyacetal - - From: 1,482,393 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Peek Oldham Coupling OCP-S Set Screw Type
JIT COUPLING
【Features】Used as power train system in the center of the coupling, the disk is of peek material ,capable of continuous use and permanently usable even in hot water and steam without any change in physical properties. Peek is usable as replacement of fluororesin in extreme chemical environment.
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 4 ～ 22 4 ～ 22 20 ～ 42 - Standard - - - - Aluminum - 2 1.2 ～ 2.8 - - - Polyacetal - - From: 734,224 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Peek Oldham Coupling OCP-CS Clamping Screw/Set Screw Mixed Type
JIT COUPLING
【Features】OCP-CS Coupling is attachable on one side using the clamp type, and on the other side ,using the set screw for convenience of attachment. For the main body, high strength aluminum (AL7075-6T) is used, and for the disk used as a medium, peek resin is applied. Superior physical properties of peek are fully utilizable and the aluminum body surface has excellent corrosion resistance with anodizing treatment. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Oldham 4 ～ 22 4 ～ 22 20 ～ 42 - Standard - - - - Aluminum - 2 1.2 ～ 2.8 - - - Polyacetal - - From: 675,540 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
High Torque Disk Coupling HDC-A Clamping Screw Double Disk Type
JIT COUPLING
【Features】High Torque Disk Coupling is a coupling which firmly assembles with several bolts a highly elastic metal disk between hubs securing the axis. With all materials being made of metal, it is usable in places where a lot of heat is generated. As the disk diameter of the HDC-A Type is larger than axial diameter, working torque can be set higher. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Disc 10 ～ 36 10 ～ 36 56 ～ 88 - Standard - - - - - - 1 0.1 ～ 0.15 - - - - Stainless Steel - From: 2,096,362 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Peek Beam Coupling BCP-SS Set Screw Type Shortened Type
JIT COUPLING
【Features】Peek material has low water absorptivity, low transmissivity, and excellent resistance to steam, water, and sea water. With its electrical characteristics being maintained within a wide frequency and temperature range, it can be suitably used for high voltage electrical equipment, plasma equipment, etc. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Slit 4 ～ 16 4 ～ 16 20 ～ 32 - Standard - - - - - - 3 0.1 ～ 0.15 - - - - - - From: 682,924 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Peek Beam Coupling BCP-S Set Screw Type General Type
JIT COUPLING
【Features】PEEK materials can be continuously used at about 250℃, and even in hot water and steam, permanently usable without changes in their physical properties. Peek is usable as replacement of fluororesin in extreme chemical environment. Even when exposed to flame, it releases very small amount of fume or toxic gas. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIALJOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Slit 4 ～ 16 4 ～ 16 20 ～ 32 - Standard - - - - - - 5 0.25 ～ 0.4 - - - - - - From: 907,506 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Peek Beam Coupling BCP-SC Clamping Screw Type Shortened Type
JIT COUPLING
[Features] The peek material has excellent chemical resistance, extremely low water absorptivity, excellent wear resistance, and is not affected though exposed to high temperature water/ steam. Peek is, in general, suitable for an environment where people are in contact with heat and chemicals. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Slit 4 ～ 16 4 ～ 16 20 ～ 32 - Standard - - - - - - 3 0.1 ～ 0.15 - - - - - - From: 797,469 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Peek Beam Coupling BCP-C Clamping Screw Type General Type
JIT COUPLING
【Features】The Slit Type Flexible Beam Coupling is a coupling used to absorb eccentricity and argument by cutting a cylindrical bar of peek material in slit form and deliver torque with very small and light moment of inertia. It has the advantage of not producing backlash and requiring no maintenance as it is composed of one body rather than an assembly of several slits. •Related Keywords: JIT COUPLING, STANDARD COUPLING, COUPLING/AXIAL JOINT
Type Shaft Bore Dia. (machined) D1(Ø) Shaft Bore Dia. (machined) D2(Ø) Outer Dia. A(Ø) Overall Length W(mm) Application Allowable Torque Range(N•m) Features Allowable Misalignment Max. Rotational Speed Range(r/min) Body Material Allowable Torque(N•m) Allowable Angular Misalignment(deg) Allowable Lateral Misalignment(mm) Product Category Allowable Lateral Misalignment Range(mm) Max. Rotational Speed(r/min) Buffer Material Disc Material Bellows Material Slit 4 ～ 16 4 ～ 16 20 ～ 32 - Standard - - - - - - 5 0.25 ～ 0.4 - - - - - - From: 1,074,117 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Type |
| Shaft Bore Dia. (machined) D1(Ø) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Application |
| Allowable Torque Range(N•m) |
| Features |
| Allowable Misalignment |
| Max. Rotational Speed Range(r/min) |
| Body Material |
| Allowable Torque(N•m) |
| Allowable Angular Misalignment(deg) |
| Allowable Lateral Misalignment(mm) |
| Product Category |
| Allowable Lateral Misalignment Range(mm) |
| Max. Rotational Speed(r/min) |
| Buffer Material |
| Disc Material |
| Bellows Material |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | ADVANCED | ADVANCED | KASCO | JIT COUPLING | MISUMI | MISUMI | MISUMI | MIKI PULLEY | ISEL | NABEYA BI-TECH | NABEYA BI-TECH | NIHON MINIATURE | NIHON MINIATURE | NIHON MINIATURE | SAKAI MANUFACTURING | SAKAI MANUFACTURING | SAKAI MANUFACTURING | SAKAI MANUFACTURING | KAYSEVEN | KAYSEVEN | KAYSEVEN | ADVANCED | ADVANCED | JIT COUPLING | JIT COUPLING | JIT COUPLING | JIT COUPLING | JIT COUPLING | JIT COUPLING | JIT COUPLING |
| Product SeriesDòng sản phẩm | High Torque Disk Coupling HDC-SA Clamping Screw Single Disk Type | MOP Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (PEEK) | Peek Oldham Coupling OCP-CS Clamping Screw/Set Screw Mixed Type | High Torque Disk Coupling HDC-A Clamping Screw Double Disk Type | Peek Beam Coupling BCP-SC Clamping Screw Type Shortened Type | |||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
| From | 729,395 VND | 4,673,678 VND | 431,546 VND | 1,829,072 VND | 1,030,519 VND | 267,874 VND | 15,409,241 VND | 2,797,549 VND | 621,425 VND | 2,028,985 VND | 587,356 VND | 1,203,530 VND | 347,194 VND | 4,150,979 VND | 2,387,192 VND | 1,753,164 VND | 2,172,964 VND | 186,795 VND | 2,901,535 VND | 2,421,862 VND | 227,393 VND | 1,482,393 VND | 734,224 VND | 675,540 VND | 2,096,362 VND | 682,924 VND | 907,506 VND | 797,469 VND | 1,074,117 VND | |
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 14 Day(s) or more | 8 Day(s) or more | 8 Day(s) | Same day or more | 6 Day(s) or more | 4 Day(s) | 15 Day(s) or more | 18 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 15 Day(s) or more | 15 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) |
| Type | Oldham | Oldham | Disc | Disc | Oldham | Oldham | Oldham | Disc | Oldham | Oldham | Oldham | Bellows | Bellows | Others | Disc | Disc | Disc | Disc | Jaw | Disc | Disc | Disc | Oldham | Oldham | Oldham | Disc | Slit | Slit | Slit | Slit |
| Shaft Bore Dia. (machined) D1(Ø) | 3 ～ 20 | 15 ～ 35 | 3 ～ 28 | 10 ～ 36 | - | 3 ～ 10 | - | - | 11 ～ 32 | - | 5 ～ 14 | 2 ～ 10 | 5 ～ 8 | 3 ～ 18 | 18 ～ 35 | 15 ～ 35 | 12 ～ 35 | 10 ～ 25 | - | - | - | 1.5 ～ 12 | 14 ～ 38 | 4 ～ 22 | 4 ～ 22 | 10 ～ 36 | 4 ～ 16 | 4 ～ 16 | 4 ～ 16 | 4 ～ 16 |
| Shaft Bore Dia. (machined) D2(Ø) | 3 ～ 20 | 15 ～ 35 | 3 ～ 32 | 10 ～ 36 | - | 3 ～ 10 | - | - | 12 ～ 32 | - | 5 ～ 14 | 2 ～ 10 | 5 ～ 8 | 3 ～ 18 | 25 ～ 40 | 19 ～ 38 | 11 ～ 16 | 12 ～ 32 | - | - | - | 1.5 ～ 12 | 14 ～ 38 | 4 ～ 22 | 4 ～ 22 | 10 ～ 36 | 4 ～ 16 | 4 ～ 16 | 4 ～ 16 | 4 ～ 16 |
| Outer Dia. A(Ø) | 12 ～ 38 | 45 ～ 70 | 22 ～ 80 | 56 ～ 88 | - | 12 ～ 25 | 16 ～ 32 | 152 ～ 262 | 40 ～ 60 | 53 ～ 161 | - | 14 ～ 19 | 18 ～ 20 | 20 ～ 40 | 80 ～ 100 | 65 ～ 100 | 55 ～ 90 | 48 ～ 65 | 56 ～ 150 | 58 ～ 346 | 81 ～ 276 | 9 ～ 28 | 44 ～ 69 | 20 ～ 42 | 20 ～ 42 | 56 ～ 88 | 20 ～ 32 | 20 ～ 32 | 20 ～ 32 | 20 ～ 32 |
| Overall Length W(mm) | 14.4 ～ 39.7 | 43.6 ～ 57 | 15.4 ～ 89.9 | - | - | 13.5 ～ 22.5 | 12 ～ 21 | 101 ～ 391 | - | 52 ～ 129 | 22.1 ～ 33.3 | 22 ～ 28 | 25 | 24 ～ 40 | 98 ～ 118 | 67.5 ～ 91 | 44.8 ～ 79.5 | 56.5 ～ 72 | 20 ～ 108 | 72 ～ 607 | 52.8 ～ 209.2 | 11.4 ～ 34.4 | 46 ～ 77 | - | - | - | - | - | - | - |
| Application | Standard | Standard / Servo Motor | Servo Motor / Stepping Motor | Standard | - | Standard | - | Servo Motor | Standard / Servo Motor / Stepping Motor | Standard | Standard / Stepping Motor | Standard | Standard | Standard | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard | Standard | Standard | Standard | Standard / Servo Motor | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Allowable Torque Range(N•m) | 1.01~3.00 ～ 20.01~50.00 | 20.01~50.00 ～ 100 < 500 | - | - | - | 0.05~1.00 ～ 1.01~3.00 | - | 1000 < 5000 ～ 5000 < 10000 | 10.01~20.00 ～ 20.01~50.00 | 5.01~10.00 ～ 50.01~100.00 | 0.05~1.00 ～ 1.01~3.00 | 0.05~1.00 | 0.05~1.00 | 0.05~1.00 ～ 3.01~5.00 | 50.01~100.00 ～ 100 < 500 | 20.01~50.00 ～ 100 < 500 | 20.01~50.00 ～ 100 < 500 | 20.01~50.00 ～ 50.01~100.00 | 20.01~50.00 ～ 100 < 500 | 10.01~20.00 ～ 20000 < 50000 | 100 < 500 ～ 5000 < 10000 | 0.05~1.00 ～ 1.01~3.00 | 20.01~50.00 ～ 50.01~100.00 | - | - | - | - | - | - | - |
| Features | High Durability ～ Small | High Torsional Rigidity | High Torque | - | - | Low Moment of Inertia ～ Small | - | High Accuracy ～ Unfinished Shaft Bore | High Torsional Rigidity ～ No Backlash | Vibration Insulation | Clean Environment ～ Vacuum Environment | High Torsional Rigidity ～ Small | High Torsional Rigidity ～ Small | Small ～ Vibration Insulation | - | - | - | High Accuracy ～ Low Moment of Inertia | Small | High Torque ～ No Backlash | High Torque ～ No Backlash | No Backlash | Clean Environment ～ Vibration Insulation | - | - | - | - | - | - | - |
| Allowable Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | - | Not Provided | Angular Misalignment / Eccentricity | Not Provided | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Not Provided | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | - | - | - | - | - | - | - |
| Max. Rotational Speed Range(r/min) | 2001~4000 ～ 4001~10000 | 4001~10000 | - | - | - | 4001~10000 ～ 10001~78000 | - | 2001~4000 ～ 4001~10000 | 4001~10000 | 2001~4000 ～ 4001~10000 | 10001~78000 | 4001~10000 | 4001~10000 | 2001~4000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | - | 4001~10000 ～ 10001~78000 | 2001~4000 ～ 10001~78000 | 4001~10000 ～ 10001~78000 | - | - | - | - | - | - | - |
| Body Material | Stainless Steel | Stainless Steel | Aluminum Alloy | - | - | Aluminum | Aluminum | Steel | Aluminum | - | Aluminum | Alloy | Stainless Steel | Alloy | Steel | Steel | Steel | Aluminum | Steel / Plastic | Steel | Steel | Plastic | Aluminum | Aluminum | Aluminum | - | - | - | - | - |
| Allowable Torque(N•m) | 2.5 ～ 50 | 50 ～ 160 | 1.3 ～ 75 | - | - | 0.3 ～ 1.6 | - | 1000 ～ 8000 | 17.65 ～ 44.13 | 6.9 ～ 210 | 0.7 ～ 2.8 | 0.147 ～ 0.343 | 0.7845 | 0.392 ～ 3.923 | 80 ～ 250 | 40 ～ 250 | 25 ～ 180 | 35 ～ 80 | 44 ～ 450 | 10 ～ 20000 | 100 ～ 7000 | 0.16 ～ 3 | 26 ～ 80 | - | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | 0.6 | 0.2 ～ 0.5 | 1 ～ 2 | 0.5 | - | 1.5 | - | 1 ～ 2 | 0.5 ～ 1 | 1 | 2 | 1.5 | 2 | 1 | 1 | 1 | 1 | 1 | - | 0.7 ～ 1 | 0.7 ～ 1 | 3 ～ 5 | 1.5 | 2 | 2 | 1 | 3 | 5 | 3 | 5 |
| Allowable Lateral Misalignment(mm) | 0.3 ～ 0.6 | 0.8 ～ 1.6 | 0.12 ～ 0.4 | 0.03 | - | 0.3 ～ 1.2 | - | 1.6 ～ 2.9 | 0.15 ～ 0.2 | 0.25 ～ 0.64 | 1.3 ～ 2 | 0.1 ～ 0.2 | 0.1 | 0.15 ～ 0.35 | 0.33 ～ 0.47 | 0.02 | 0.02 | 0.26 ～ 0.31 | - | 0.55 ～ 2.1 | - | 0.2 ～ 0.5 | 0.7 ～ 1.2 | 1.2 ～ 2.8 | 1.2 ～ 2.8 | 0.1 ～ 0.15 | 0.1 ～ 0.15 | 0.25 ～ 0.4 | 0.1 ～ 0.15 | 0.25 ～ 0.4 |
| Product Category | Coupling Main Body | Coupling Main Body | Coupling Main Body | - | Maintenance Components | Coupling Main Body | Maintenance Components | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment Range(mm) | 0.21~0.40 ～ 0.41~1.0 | 0.41~1.0 ～ 1.1~3.0 | - | - | - | 0.21~0.40 ～ 1.1~3.0 | - | 1.1~3.0 | 0.02~0.2 | 0.21~0.40 ～ 0.41~1.0 | 1.1~3.0 | 0.02~0.2 | 0.02~0.2 | 0.02~0.2 ～ 0.21~0.40 | 0.21~0.40 ～ 0.41~1.0 | 0.02~0.2 | 0.02~0.2 | 0.21~0.40 | - | - | - | 0.02~0.2 ～ 0.41~1.0 | 0.41~1.0 ～ 1.1~3.0 | - | - | - | - | - | - | - |
| Max. Rotational Speed(r/min) | 4000 ～ 10000 | 5000 ～ 10000 | 6000 ～ 12000 | - | - | 5000 ～ 12000 | - | 3400 ～ 5900 | 5000 ～ 8000 | 3750 ～ 9200 | 19000 ～ 31000 | 5000 | 10000 | 3000 | 10000 | 10000 | 10000 | 10000 | 6000 ～ 10000 | - | 3100 ～ 20000 | 4000 ～ 12000 | 6000 ～ 12000 | - | - | - | - | - | - | - |
| Buffer Material | Aluminum Bronze | Aluminum Bronze | - | - | - | Polyacetal | Polyacetal | - | - | - | PEEK | - | - | Polyurethane | - | - | - | - | - | - | - | - | Polyacetal | Polyacetal | Polyacetal | - | - | - | - | - |
| Disc Material | - | - | Stainless Steel | Stainless Steel | - | - | - | Stainless Steel | - | - | - | - | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | - | - | Glass Fiber Reinforced Resin | - | - | - | Stainless Steel | - | - | - | - |
| Bellows Material | - | - | - | - | - | - | - | - | - | - | - | Phosphor Bronze | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Shaft Bore Dia. (machined) D1(Ø)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
- 6
- 6.4
- 8
- 9
- 9.5
- 10
- 12
- 12.7
- 13
- 13.5
- 13.8
- 14
- 14.5
- 15
- 16
- 16.1
- 16.5
- 16.6
- 16.8
- 17
- 17.5
- 17.8
- 18
- 19
- 19.1
- 19.5
- 20
- 21
- 22
- 22.2
- 22.5
- 23.8
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.2
- 26.5
- 26.6
- 27
- 27.3
- 28
- 28.8
- 29
- 29.5
- 30
- 31.7
- 31.8
- 32
- 32.8
- 33
- 33.3
- 34
- 34.4
- 34.5
- 35
- 36
- 37.8
- 38
- 39
- 39.5
- 40
- 41.3
- 42
- 42.5
- 42.8
- 43
- 44
- 44.5
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.6
- 54
- 54.5
- 54.8
- 55
- 56
- 57
- 58
- 60
- 63
- 64
- 65
- 66
- 68
- 69
- 69.9
- 70
- 73
- 75
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 87
- 88
- 90
- 93
- 94
- 94.5
- 95
- 99
- 100
- 102
- 104
- 104.5
- 105
- 112
- 117
- 118
- 120
- 125
- 126
- 135
- 138
- 140
- 143
- 144
- 150
- 152
- 155
- 160
- 161
- 168
- 170
- 178
- 185
- 190
- 194
- 200
- 210
- 214
- 225
- 246
- 262
- 276
- 308
- 346
-
Overall Length W(mm)
- 5.1
- 7.3
- 8.4
- 9
- 9.4
- 9.6
- 10
- 10.2
- 10.5
- 11.2
- 11.4
- 11.8
- 11.9
- 12
- 12.35
- 12.4
- 12.7
- 13
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.7
- 14.9
- 15
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
- 16
- 16.2
- 16.5
- 16.6
- 16.7
- 17
- 17.4
- 17.5
- 17.6
- 17.8
- 17.9
- 18
- 18.1
- 18.4
- 18.5
- 18.7
- 18.8
- 19
- 19.1
- 19.2
- 19.35
- 19.4
- 19.6
- 19.7
- 19.8
- 20
- 20.2
- 20.4
- 20.5
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 22
- 22.1
- 22.2
- 22.4
- 22.5
- 22.8
- 23
- 23.05
- 23.1
- 23.15
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.9
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.9
- 25
- 25.4
- 25.45
- 25.5
- 25.6
- 25.7
- 25.9
- 26
- 26.1
- 26.2
- 26.5
- 26.6
- 27
- 27.2
- 27.3
- 27.4
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.8
- 29
- 29.4
- 29.5
- 29.8
- 30
- 30.2
- 30.4
- 30.5
- 31
- 31.2
- 31.4
- 31.5
- 31.6
- 31.7
- 31.8
- 32
- 32.2
- 32.3
- 32.5
- 32.6
- 32.7
- 32.8
- 33
- 33.2
- 33.3
- 33.5
- 33.6
- 33.8
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 35
- 35.5
- 35.6
- 36
- 36.1
- 36.4
- 36.5
- 36.8
- 37
- 37.2
- 37.4
- 37.8
- 38
- 38.2
- 38.4
- 38.5
- 38.6
- 39
- 39.2
- 39.4
- 39.5
- 39.7
- 39.8
- 40
- 40.5
- 41
- 41.8
- 42
- 42.2
- 43
- 43.2
- 43.4
- 43.5
- 43.6
- 43.8
- 44
- 44.2
- 44.5
- 44.7
- 44.8
- 45
- 45.1
- 45.2
- 45.3
- 45.5
- 46
- 46.1
- 46.4
- 46.6
- 47
- 47.1
- 47.2
- 47.6
- 48
- 48.4
- 49
- 49.2
- 49.4
- 50
- 50.2
- 50.5
- 50.6
- 50.8
- 51
- 51.2
- 51.3
- 51.4
- 52
- 52.8
- 53
- 53.3
- 53.4
- 53.6
- 54
- 54.1
- 54.4
- 54.5
- 54.6
- 55
- 55.5
- 56
- 56.1
- 56.2
- 56.5
- 56.6
- 56.8
- 57
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59
- 59.4
- 59.7
- 59.8
- 59.9
- 60
- 60.4
- 60.5
- 61
- 61.2
- 62
- 63
- 63.4
- 63.5
- 63.6
- 63.7
- 63.8
- 64
- 64.8
- 65
- 65.4
- 65.6
- 66
- 66.4
- 66.6
- 66.7
- 66.8
- 67
- 67.1
- 67.5
- 68
- 68.3
- 68.5
- 68.6
- 68.7
- 68.8
- 69.2
- 69.5
- 69.6
- 69.8
- 70
- 70.5
- 70.6
- 70.9
- 71
- 71.2
- 72
- 72.4
- 73
- 73.3
- 74
- 74.4
- 74.8
- 75
- 75.5
- 75.6
- 75.9
- 76.2
- 77
- 77.2
- 77.6
- 77.8
- 78
- 78.8
- 79.5
- 79.8
- 80
- 80.8
- 81
- 81.5
- 81.8
- 82
- 82.5
- 82.6
- 83
- 83.6
- 84
- 84.7
- 85
- 85.2
- 85.5
- 85.6
- 86
- 87.6
- 88
- 89.2
- 89.3
- 89.5
- 89.6
- 89.8
- 89.9
- 90
- 90.5
- 90.8
- 91
- 92
- 93.6
- 94
- 95
- 95.6
- 96
- 96.6
- 97
- 97.2
- 98
- 98.5
- 98.6
- 98.7
- 99
- 99.2
- 99.6
- 100
- 100.2
- 101
- 101.6
- 102
- 102.5
- 104
- 104.4
- 105.8
- 106
- 107.6
- 108
- 109
- 110
- 111
- 112.8
- 113
- 113.4
- 114
- 115
- 115.6
- 117.6
- 118
- 118.4
- 118.8
- 119.6
- 120
- 120.8
- 121
- 123.6
- 124
- 125
- 126
- 127
- 129
- 129.6
- 130
- 131
- 136.4
- 137.6
- 138
- 138.7
- 140
- 141
- 144
- 144.2
- 146
- 147
- 150
- 150.6
- 153.0
- 154
- 154.6
- 156.4
- 160
- 164
- 164.6
- 170.6
- 176
- 178.4
- 182.8
- 185
- 192.4
- 193
- 200
- 208.8
- 209.2
- 210
- 216
- 217
- 218
- 223
- 238
- 241.2
- 249.4
- 260
- 286.8
- 290
- 307.0
- 335
- 337.2
- 377
- 391
- 421
- 607
-
Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
-
Allowable Torque Range(N•m)
-
Features
-
Allowable Misalignment
-
Max. Rotational Speed Range(r/min)
-
Body Material
-
Allowable Torque(N•m)
-
Allowable Angular Misalignment(deg)
-
Allowable Lateral Misalignment(mm)
-
Product Category
-
Allowable Lateral Misalignment Range(mm)
-
Max. Rotational Speed(r/min)
-
Buffer Material
-
Disc Material
-
Bellows Material
Related Categories to Flexible Shaft CouplingsDanh mục liên quan đến Flexible Shaft Couplings
FAQ Flexible Shaft Couplings
- Question: What are the different types of flexible Shaft Couplings?
- Answer: There are several types of flexible Shaft Couplings, including beam, bellows, jaw, Oldham, disc, diaphragm, and gear couplings. Each type has unique features and benefits that make them suitable for different applications and environments. Flexible Shaft Couplings are used to connect two shafts and allow for misalignment while transmitting torque between them.
- Question: What factors should be considered when selecting a flexible Shaft Couplings?
- Answer: The factor for selecting a flexible coupling, there are several factors that should be considered, including the required torque capacity, misalignment capability, operating speed, and environmental factors such as temperature and humidity. Other considerations include the required degree of axial and radial stiffness, the space available for the coupling, and the type of equipment being connected. It is also important to consider the potential for wear and tear, maintenance requirements, and the cost of the coupling.
- Question: How is a flexible Shaft Couplings installed and maintained?
- Answer: Shaft Couplings are installed by aligning the shafts and tightening the screws or bolts. Maintenance involves regular inspections for signs of wear, damage, or misalignment. Lubrication is important to prevent excessive wear and reduce friction. Cleaning and tightening of bolts and screws are also necessary to ensure proper operation.
- Question: What is the difference between a flexible coupling and a rigid coupling?
- Answer: A flexible coupling allows for some misalignment between two connected shafts while transmitting torque, while a rigid coupling does not allow for any misalignment. Flexible Shaft Couplings are designed to absorb shock and vibration, which can help reduce wear and tear on connected equipment. Rigid couplings, on the other hand, are used in applications where precise alignment between shafts is critical, such as in high-speed rotating equipment or precision machinery.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy