What are the different types of flexible Shaft Couplings?

There are several types of flexible Shaft Couplings, including beam, bellows, jaw, Oldham, disc, diaphragm, and gear couplings. Each type has unique features and benefits that make them suitable for different applications and environments. Flexible Shaft Couplings are used to connect two shafts and allow for misalignment while transmitting torque between them.

What factors should be considered when selecting a flexible coupling?

The factor for selecting a flexible coupling, there are several factors that should be considered, including the required torque capacity, misalignment capability, operating speed, and environmental factors such as temperature and humidity. Other considerations include the required degree of axial and radial stiffness, the space available for the coupling, and the type of equipment being connected. It is also important to consider the potential for wear and tear, maintenance requirements, and the cost of the coupling.

How is a flexible coupling installed and maintained?

Shaft Couplings are installed by aligning the shafts and tightening the screws or bolts. Maintenance involves regular inspections for signs of wear, damage, or misalignment. Lubrication is important to prevent excessive wear and reduce friction. Cleaning and tightening of bolts and screws are also necessary to ensure proper operation.

What is the difference between a flexible coupling and a rigid coupling?

A flexible coupling allows for some misalignment between two connected shafts while transmitting torque, while a rigid coupling does not allow for any misalignment. Flexible couplings are designed to absorb shock and vibration, which can help reduce wear and tear on connected equipment. Rigid couplings, on the other hand, are used in applications where precise alignment between shafts is critical, such as in high-speed rotating equipment or precision machinery.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Flexible Shaft Couplings（Type：Oldham）

Couplings serve a crucial role in transmission system by connecting two shafts and facilitating the transmission of torque between them. These devices are essential in various applications where precise and reliable power transmission is required. When selecting couplings, it is crucial to consider factors such as Shaft Bore Diameter, Overall Length , Materials (e.g., Stainless Steel, Steel, Aluminum, Plastic and etc.), Features(e.g., Clean Environment, Heat Resistant , High Torque and so on). These considerations are vital for ensuring the production of high-quality products. We highly recommend reputable brands like MISUMI, ADVANCED, COUP-LINE, as well as cost-effective options from MISUMI ECONOMY.
Take advantage of the convenience of FREE SHIPPING and NO MINIMUM ORDER on couplings. If you have any doubts or require assistance in choosing the right product, our experts are readily available to provide.

Show More Detail Show More Detail

Type	Slit Disc Oldham Jaw Bellows Rigid Others Vibration Damping Rubber Type
Brand	(18) (4) ADVANCED (4) COUP-LINE (1) ISEL (1) JIT COUPLING (6) KASCO (1) KAYSEVEN (3) KOYO ELECTRONIC (0) MIGHTY (3) MIKI PULLEY (0) MITSUBOSHI BELTING (1) NABEYA BI-TECH (8) NIHON MINIATURE (3) ORIENTAL MOTOR (0) SAKAI MANUFACTURING (0) SUNGIL (3)
Filter By	All Sale Items
CAD	2D 3D
Days to Ship	All Same day 1 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less Others

52 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

OLDHAM Type Coupling (SOH Series)

SUNGIL

[Features] ・Electrical insulation effect, non-magnetic ・Absorption of excellent eccentricity and declination (slip phenomenon of middle disc and rounding effect of hub) ・Easy to assemble and replace ・ Minimization of axial load during unalignment ・Free flow, low bearing load •Related Keywords: Sungil Machinery, Standard Coupling, Coupling / Shaft Joint

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 35	3 ～ 35	16 ～ 118	21 ～ 138	Standard / Stepping Motor	1.01~3.00 ～ 100 < 500	No Backlash ～ Vibration Insulation	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Aluminum / Aluminum Alloy	1 ～ 200	1.5 ～ 2	1 ～ 4.5	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	3000 ～ 8000	Polyacetal	Aluminum	-

From: 407,683 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

On Sale Till 31/12/2024

MiSUMi Economy

Oldham Couplings Clamping Type

MiSUMi Economy

MISUMI

· GCOC/ GCOCRK/ GCOCWK Model Oldham Couplings Clamping Type. · Couplings consisting of 2 hubs and 1 spacer disc. · 2 hubs materials are aluminum alloy and surface treatment with alumite treatment. · Spacer disc material is Polyacetal. · Shaft Fastening Method: Lock bolt clamp screw type. · Lock bolt clamp screw material: steel SCM435 surface treatment with Ferro ferric Oxide Protective Film. · Oldham Coupling size: 16 to 32. · Allowable Angular misalignment 3 degree. · Operating Temperature Range: -20 to 80 °C · Maximum Rotational Speed Range: 4001 ~ 10000 (r/min).

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	5 ～ 14	5 ～ 14	16 ～ 32	29 ～ 45	Standard	0.05~1.00 ～ 3.01~5.00	High Torque	Angular Misalignment / Eccentricity	4001~10000	Aluminum	0.7 ～ 4.5	3	1 ～ 2.5	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	10000	Polyacetal	-	-

From: 206,749 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

MOR Flexible Coupling - Oldham Type

NABEYA BI-TECH

[Features]· Oldham type flexible coupling.· Due to hub and spacer slip, large eccentricity / deflection angles are allowed.· Eccentric reaction force generated by misalignment is small, reducing the burden on the shaft.· Easy to assemble with a simple structure

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 38	1 ～ 38	6 ～ 68	8.4 ～ 77	Standard / Stepping Motor	0.05~1.00 ～ 100 < 500	High Torque	Angular Misalignment / Eccentricity	4001~10000 ～ 78001~	Aluminum	0.4 ～ 160	3	0.5 ～ 4.5	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	9000 ～ 100000	Polyacetal	-	-

From: 282,158 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Oldham Couplings Clamping Type

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 38	4 ～ 38	16 ～ 70	29 ～ 77	Standard / Servo Motor / Stepping Motor	-	High Torque ～ High Torsional Rigidity	-	-	Aluminum Alloy	0.7 ～ 56	3	0.8 ～ 3.5	Coupling Main Body	-	2500 ～ 9000	Nylon	-	-

Days to Ship: Số ngày giao hàng: 11 Day(s)

11 Day(s)

Economy series

You can add up to 6 items per a category to the compare list. Compare

On Sale Till 31/12/2024

MiSUMi Economy

Oldham Couplings Set Screw Type

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.[Features/Characteristics]The middle of the coupling is connected with a cross slider, which can be disassembled freely. Large radial and angular deviations are allowed.

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 14	3 ～ 14	16 ～ 32	18 ～ 33	Standard	0.05~1.00 ～ 3.01~5.00	High Torque	Angular Misalignment / Eccentricity	4001~10000	Aluminum Alloy	0.7 ～ 4.5	3	1 ～ 2.5	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	10000	Polyacetal	-	-

From: 207,456 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers

Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers

MISUMI

Large tolerance for lateral and angular misalignments covers up to Ø38 max. shafts.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	14 ～ 38	14 ～ 38	44 ～ 70	46 ～ 77	Standard	20.01~50.00 ～ 50.01~100.00	High Torque ～ Low Moment of Inertia	Angular Misalignment / Eccentricity / Axial Misalignment	4001~10000 ～ 10001~78000	Aluminum	26 ～ 80	2	1 ～ 2	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	8000 ～ 12000	Polyacetal	-	-

6 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Oldham Couplings Set Screw Type

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 40	4 ～ 40	16 ～ 70	18 ～ 77	Standard / Servo Motor / Stepping Motor	-	High Torque ～ High Torsional Rigidity	-	-	Aluminum Alloy	0.7 ～ 56	3	0.8 ～ 3.8	Coupling Main Body	-	2500 ～ 9000	Nylon	-	-

Days to Ship: Số ngày giao hàng: 11 Day(s) or more

11 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Peak Oldham Coupling OCP-C Clamping Screw Type

JIT COUPLING

【Features】Peek Oldham Coupling is a coupling designed to be suitable for a place with a relatively wide axial alignment(eccentricity) rangeby machining a slot and groove on the tip of the cylindrical aluminum material and inserting a peak disk with excellent lubrication properties between the grooves. The peak material has excellent chemical resistance, extremely low water absorptivity, excellent wear resistance, and is not affected though exposed to high temperature water and steam. •Related Keywords: JIT COUPLING, STANDARD COUPLING, /AXIAL JOINT

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 22	4 ～ 22	20 ～ 42	-	Standard	-	-	-	-	Aluminum	-	2	1.2 ～ 2.8	-	-	-	Polyacetal	-	-

From: 968,524 VND
Days to Ship: Số ngày giao hàng: 8 Day(s)

8 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Clamping

MISUMI

Hub and spacer can be separated for easy assembly.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 20	4 ～ 20	14.5 ～ 38	18.4 ～ 40	Standard	1.01~3.00 ～ 20.01~50.00	High Torque ～ Low Moment of Inertia	Angular Misalignment / Eccentricity / Axial Misalignment	4001~10000	Stainless Steel	1.6 ～ 28	3	0.8 ～ 2.5	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	5800 ～ 10000	Carbon Reinforced Resin	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MOM Flexible Coupling - Oldham Type

NABEYA BI-TECH

[Features]· Oldham type flexible coupling.· FCD400 used in spacer.· Ideal for low speed / high torque specifications.· Grease applied between hub and spacer to prevent burn-in.· Due to hub and spacer slip, large eccentricity / deflection angles are allowed.· The protrusion (resin pin) provided on the spacer allows the angle of deviation without difficulty.· Long-term maintenance-free.· Grease accumulated in the grease hole gradually leaks during operation, to maintain long-term lubrication performance.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 42	3 ～ 42	12 ～ 70	15 ～ 68.6	Standard	5.01~10.00 ～ 100 < 500	High Torque ～ High Torsional Rigidity	Angular Misalignment / Eccentricity	1001~2000	Steel	5.4 ～ 352	2	0.3 ～ 1.4	Coupling Main Body	0.21~0.40 ～ 1.1~3.0	2000	-	-	-

From: 550,438 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping

Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping

MISUMI

All-metal Oldham coupling· Stainless steel hub and aluminum bronze slider combination· Ultra-high viscosity grease is filled in the minimum gap of the slider to prevent seizure and zero backlash measures· 4 times the permissible torque shock Will not be damaged by torque (FSPJU)

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	15 ～ 35	15 ～ 35	45 ～ 70	43.6 ～ 57	Standard	20.01~50.00 ～ 50.01~100.00	High Torque ～ High Torsional Rigidity	Angular Misalignment / Eccentricity / Axial Misalignment	4001~10000	Stainless Steel	50 ～ 160	1	0.8 ～ 1.6	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	5000 ～ 10000	Aluminum Bronze	-	-

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling -Clamping Short Type - [SOHM-16C]

SUNGIL

Coupling with a relatively large misalignment tolerance. Clamping type product. SUNGIL The company is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 35	3 ～ 35	16 ～ 73	21 ～ 77	Standard / Stepping Motor	1.01~3.00 ～ 50.01~100.00	No Backlash ～ Vibration Insulation	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Aluminum / Aluminum Alloy	1 ～ 65	2	1 ～ 3.5	Coupling Main Body	1.1~3.0 ～ 3.1~5.0	3000 ～ 8000	Polyacetal	-	-

From: 407,683 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Coupling Oldham set screw type

MISUMI

Hub and spacer can be separated for easy assembly.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 20	1 ～ 20	6 ～ 38	8.4 ～ 40	Standard	0.05~1.00 ～ 20.01~50.00	High Torque ～ Low Moment of Inertia	Angular Misalignment / Eccentricity / Axial Misalignment	4001~10000 ～ 10001~78000	Stainless Steel	0.3 ～ 28	3	0.3 ～ 2.5	Coupling Main Body	0.21~0.40 ～ 1.1~3.0	5800 ～ 12000	Carbon Reinforced Resin	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Clamping / Set Screw

MISUMI

"Have the spacer protruded to reduce load applied to the shaft, by naturally tolerating large angular/lateral misalignment."

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 16	3 ～ 16	12 ～ 40	14.9 ～ 50	Standard	0.05~1.00 ～ 5.01~10.00	Low Moment of Inertia	Angular Misalignment / Eccentricity	10001~78000	Aluminum	0.2 ～ 9	2 ～ 3	0.6 ～ 3	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	15000 ～ 52000	Polyacetal	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - High Rigidity, Clamping

MISUMI

Aluminum bronze is used for spacer and it has allowable torque twice as much as Resin Type.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 20	4 ～ 20	14.5 ～ 38	18.4 ～ 39.5	Standard	1.01~3.00 ～ 20.01~50.00	High Torque ～ Low Moment of Inertia	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Stainless Steel	3 ～ 50	1.5	0.5 ～ 1	Coupling Main Body	0.41~1.0	4000 ～ 8000	Aluminum Bronze	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling, Clamping-Screw Type OC-C

JIT COUPLING

[Features]· In oldham coupling, a slot groove on the tip of the cylindrical aluminum material is processed, the polyacetal disk with superior lubrication performance is inserted between the groove, and mechanical part is proceesed and the tightening errors is corrected, and to transmit rotational force.· Ideal coupling.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 30	3 ～ 30	16 ～ 54	22 ～ 58	Standard	-	Low Moment of Inertia ～ Vibration Insulation	-	-	Aluminum	-	2	1 ～ 3.5	-	-	2700 ～ 8000	Polyacetal	-	-

From: 275,440 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling - Clamping Type -

SUNGIL

Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 28	3 ～ 28	16 ～ 118	23.6 ～ 138	Standard / Stepping Motor	1.01~3.00 ～ 100 < 500	No Backlash ～ Vibration Insulation	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Aluminum	2.5 ～ 200	1.5 ～ 2	1 ～ 4.5	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	3200 ～ 8000	Polyacetal	Aluminum	-

From: 463,658 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - High Rigidity, Set Screw

MISUMI

Aluminum bronze is used for spacer and it has allowable torque twice as much as Resin Type.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 20	4 ～ 20	14.5 ～ 38	16 ～ 39.5	Standard	1.01~3.00 ～ 20.01~50.00	High Torque ～ Low Moment of Inertia	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Stainless Steel	3 ～ 50	1.5	0.5 ～ 1	Coupling Main Body	0.41~1.0	4000 ～ 8000	Aluminum Bronze	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling, Clamping Screw / Set Screw Combined Type OC-CS

JIT COUPLING

[Features]· The OC-CS Type coupling uses a clamp-type on one side and a set screw on the other side to facilitate mounting.· Used high rigidity aluminum (AL705-6T) for the main body, and used acetal resin for the disk used as an intermediate medium.· The surface is anodized and features excellent abrasion-resistance and wear resistance.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 22	3 ～ 22	16 ～ 42	21 ～ 45	Standard	-	Low Moment of Inertia ～ Vibration Insulation	-	-	Aluminum	-	2	1 ～ 3	-	-	3000 ～ 8000	Polyacetal	-	-

From: 234,660 VND
Days to Ship: Số ngày giao hàng: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MOL Flexible Coupling - Oldham Type

NABEYA BI-TECH

High torque, small eccentric reaction force, large permissible misalignment large, with vibration absorption.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 25	3 ～ 25	16 ～ 63	18 ～ 70.6	Standard / Stepping Motor	0.05~1.00 ～ 20.01~50.00	-	Angular Misalignment / Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.7 ～ 36	3	1 ～ 4	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	10000 ～ 39000	Polyacetal	-	-

From: 399,980 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

HYPERFLEX Coupling, MT Type

MITSUBOSHI BELTING

● Compact with strong transmission torque for various applications. ● Easy to install and maintenance-free. ● Polyurethane elastic body with superior oil- and abrasion-resistance is also provided as standard.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	60 ～ 225	72 ～ 238	-	5.01~10.00 ～ 1000 < 5000	-	Not Provided	2001~4000 ～ 4001~10000	-	9.81 ～ 1370	-	-	Coupling Main Body / Maintenance Components	-	3600 ～ 6000	Carbon Reinforced Resin / Polyurethane	-	-

From: 285,101 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling KOH Series

KASCO

Domestic Coupling Kasco (kosa) is a product.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 28	3 ～ 28	16 ～ 73	17.9 ～ 81.5	Standard / Stepping Motor	-	High Torque	-	-	Aluminum Alloy	1 ～ 65	1.5	1 ～ 3.5	Coupling Main Body	-	4500 ～ 13000	Polyacetal	-	-

From: 368,650 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Spacers (for MCO/MCOC)

Oldham Couplings - Spacers (for MCO/MCOC)

MISUMI

[Features]·This is an Oldham type coupling. ·It can be used as a maintenance product.

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	Maintenance Components	-	-	-	-	-

From: 163,898 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings MJ series　

MIGHTY

· Oldham Couplings MJ series · Oldham Couplings are 3-part couplings consisting of 2 hubs and 1 torque disc. · 2 hubs materials are Aluminum Alloy and Free-cutting brass. · 3 methods surface treatment solution for hubs are non-chromium chemical conversion treatment, Anodization and Electroless nickel plating. · Torque disc materials are Polyacetal, Nylon and PEEK. · Shaft Fastening Method: Set screw type. · MJ series size: 6 to 57. · Allowable Angular misalignment 1 degree. · All through hole hubs MJ-50 and 57 with keyways standard (JIS B13101-1996)

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	2 ～ 56	2 ～ 30	6.4 ～ 118	5.1 ～ 77.8	Standard / Servo Motor / Stepping Motor / Encoder	0.05~1.00 ～ 20.01~50.00	High Accuracy ～ Vibration Insulation	Not Provided / Angular Misalignment / Eccentricity	-	Aluminum / Alloy	0.06 ～ 37.5	1	0.8 ～ 7	-	0.41~1.0 ～ 5.1~100	-	Polyacetal / Nylon / PEEK / Others	-	-

From: 114,570 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Super zero Oldham coupling series MCZ type aluminum alloy products

NIHON MINIATURE

Type that fixes the shaft with tightening of a set screw and clamp. Larger shaft hole diameters can be selected.[Features]· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy· Stronger and more compact design, that can now be used with high precision equipment impossible until now.· Stainless steel series added, becoming 4 series, with further improvements.· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.

CAD ：: 2D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 25	3 ～ 35	18 ～ 70	25 ～ 53	Standard	1.01~3.00 ～ 100 < 500	High Torque ～ Small	Angular Misalignment / Eccentricity	4001~10000 ～ 10001~78000	Aluminum	2.452 ～ 176.52	1	1.5 ～ 2.5	Coupling Main Body	1.1~3.0	10000 ～ 25000	Others	-	-

From: 997,090 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Couplings/Oldham/Clamping/Set Screw

MISUMI

Are economically priced with the quality/perforce kept to the same level as conventional products. Can serve as the substitute for CPOC and CPO Types.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	6.35	10	25	28	-	-	-	Angular Misalignment / Eccentricity	-	Aluminum	2	3	2	Coupling Main Body	-	10000	Polyacetal	-	-

From: 491,402 VND
Days to Ship: Số ngày giao hàng: 4 Day(s)

4 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Oldham/Coupling MJX Series

MIGHTY

[Features]·True zero backlash due to preload structure·Structurally absorbs eccentricity and declination, no fatigue fracture·No need for troublesome, precise alignment·Broad selectivity with a wide range of variations·Electrical insulation, non-magnetic, oil-free[Applications]·Digital servo equipment, robots, XY tables, measuring instruments, measuring equipment, electronic equipment, information and communication equipment·Servo motors, stepping motors, resolvers, synchros, etc., radars, sonars, fish finders, precision equipment, air conditioning equipment, environmental equipment

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	14 ～ 60	14 ～ 60	70 ～ 118	82.6 ～ 141	Standard / Servo Motor / Stepping Motor / Encoder	100 < 500	High Accuracy ～ Vibration Insulation	Angular Misalignment / Eccentricity	-	Aluminum	117 ～ 400	1	8 ～ 12	-	5.1~100	-	Polyacetal	-	-

From: 8,740,876 VND
Days to Ship: Số ngày giao hàng: 10 Day(s) or more

10 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MOS Flexible Coupling - Oldham Type

NABEYA BI-TECH

Small eccentric reaction force, large permissible misalignment large, with vibration absorption.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 14	1 ～ 14	8 ～ 32	12.7 ～ 33.3	Standard / Stepping Motor	0.05~1.00 ～ 1.01~3.00	-	Angular Misalignment / Eccentricity	10001~78000	Aluminum	0.08 ～ 2.8	2	0.5 ～ 2	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	19000 ～ 78000	Polyacetal	-	-

From: 707,000 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

K Flex Couplings C Model (Single Model)

KAYSEVEN

High torque transmission, energy saving design, large allowable misalignment, no backlash product. Recommended for pairing NC manufacturing machinery etc. with servo motors.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	81 ～ 276	52.8 ～ 209.2	Standard / Servo Motor	100 < 500 ～ 5000 < 10000	High Torque ～ No Backlash	Angular Misalignment / Axial Misalignment	4001~10000 ～ 10001~78000	Steel	100 ～ 7000	0.7 ～ 1	-	Coupling Main Body	-	3100 ～ 20000	-	-	-

From: 2,421,862 VND
Days to Ship: Số ngày giao hàng: 10 Day(s) or more

10 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling, Set-Screw Type OC-S

JIT COUPLING

[Features]· Extends through the inside of an oldham disk and is free of shaft interference.· The product is designed that acetal disk receives compressive force and generation of damage in disk is minimal.· The oldham disk is a near-perfect insulator and blocks electrical noise.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 22	3 ～ 22	16 ～ 42	20 ～ 42	Standard	-	Low Moment of Inertia ～ Vibration Insulation	-	-	Aluminum	-	2	1 ～ 3	-	-	3000 ～ 8000	Polyacetal	-	-

From: 191,500 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling ASJ/ASJU

ADVANCED

· Small but strong coupling with excellent durability· A wide selection of products that can be selected based on the ideal external size· Combination of SUS sintered hub and carbon FRP slider

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 20	1 ～ 20	6 ～ 38	8.4 ～ 118.8	Standard	0.05~1.00 ～ 20.01~50.00	High Durability ～ Vibration Insulation	Angular Misalignment / Eccentricity	4001~10000 ～ 10001~78000	Stainless Steel	0.3 ～ 28	1.5 ～ 2	0.3 ～ 0.7	Coupling Main Body	0.21~0.40 ～ 1.1~3.0	5800 ～ 12000	Carbon Reinforced Resin	-	-

From: 374,408 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

K-7 coupling MD series

KAYSEVEN

· K-7 coupling MD series - Oldham Type. · MD series Oldham Couplings structure Consists of three parts :2 hubs and 1 torque disc. · Application: Robot, Various pumps, Blower, Printing machine, NC-MC machine tool and Conveyor. · As K-7 standard specifications, 12 MD types from MD-35 to MD-160M are available. · MD series Body material is aluminum alloy. · Torque disc material: Polyacetal resin. · Torque discs are made of resin and do not need to be lubricated. · Operating environment Temperature Range: -40 to 85 °C · Assembly and replacement of intermediate torque transmission members are easy.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	35 ～ 160	54 ～ 164	Standard	5.01~10.00 ～ 100 < 500	Small ～ Vibration Insulation	Not Provided	2001~4000 ～ 4001~10000	Steel / Aluminum / Plastic	9.8 ～ 294	-	-	Coupling Main Body	-	4000 ～ 10000	Polyacetal	-	-

From: 146,953 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Clamping / Set Screw - Spacers (for CPO, CPOC, CPOCG)

Oldham Couplings - Clamping / Set Screw - Spacers (for CPO, CPOC, CPOCG)

MISUMI

Coupling CPO, CPOC, CPOCG compatible spacer.

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	Maintenance Components	-	-	-	-	-

From: 56,926 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

MOHS-C Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (Vespel) - Clamping Type

NABEYA BI-TECH

Heat resistant. Operating temperature range -20°C to 200°C. Clean. Large allowable misalignment.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	5 ～ 14	5 ～ 14	19 ～ 31.7	22.1 ～ 33.3	Standard / Stepping Motor	0.05~1.00 ～ 1.01~3.00	Clean Environment ～ Vibration Insulation	Angular Misalignment / Eccentricity / Axial Misalignment	1001~2000	Stainless Steel	0.4 ～ 2.2	2	1.3 ～ 2	Coupling Main Body	1.1~3.0	900	Vespel	-	-

From: 6,842,261 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Super zero Oldham coupling series CCZ type aluminum alloy products

NIHON MINIATURE

Clamp type, aluminum made Oldham coupling. Prevent slippage by tightening the entire shaft.[Features]· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy· Stronger and more compact design, that can now be used with high precision equipment impossible until now.· Stainless steel series added, becoming 4 series, with further improvements.· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.

CAD ：: 2D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 40	3 ～ 40	16 ～ 80	20 ～ 61	Standard	1.01~3.00 ～ 100 < 500	High Torque ～ Small	Angular Misalignment / Eccentricity	10001~78000	Aluminum	1.961 ～ 215.746	1	1.5 ～ 2.5	Coupling Main Body	1.1~3.0	15000 ～ 25000	Others	-	-

From: 597,154 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings MJC series　

MIGHTY

· Flexible Shaft Coupling - Oldham, Clamping, MJC Series · Oldham Couplings are 3-part couplings consisting of 2 hubs and 1 torque disc. · 2 hubs materials are Aluminum Alloy and Free-cutting brass. · 3 methods surface treatment solution for hubs are non-chromium chemical conversion treatment, Anodization and Electroless nickel plating. · The torque disc material is Polyacetal. · Shaft Fastening Method: Clamp locking type. · Application: Encoder, Servo Motor, Standard, Stepping Motor. · Allowable Angular misalignment 1 degree. · All through hole hubs MJ-50 and 57 with keyways standard (JIS B13101-1996)

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 30	3 ～ 30	19.1 ～ 57	22 ～ 77.8	Standard / Servo Motor / Stepping Motor / Encoder	1.01~3.00 ～ 20.01~50.00	High Accuracy ～ Vibration Insulation	Angular Misalignment / Eccentricity	-	Aluminum	1.7 ～ 37.5	1	2.4 ～ 7	-	1.1~3.0 ～ 5.1~100	-	Polyacetal	-	-

From: 1,544,445 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Sleeved Couplings - Sleeved Set Screw

MISUMI

The torque is conveyed by the serrations engagement on the sleeve. A flexible coupling with a simple structure.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 14	3 ～ 14	16 ～ 32	27 ～ 48	Standard	0.05~1.00 ～ 1.01~3.00	Low Moment of Inertia	Angular Misalignment / Eccentricity	10001~78000	Alloy	0.5 ～ 3	2	0.2	Coupling Main Body	0.02~0.2	19000 ～ 39000	-	-	-

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MSF Flexible Coupling-Serration Type

NABEYA BI-TECH

Simple structure, low-cost.[Features]· Transmission of torque by engagement of serrations.· Simple structure flexible coupling.· Excellent flexibility.· Acceptable eccentricity / large deviation angle, with torsional vibration also absorbed.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 15	3 ～ 15	16 ～ 32	27 ～ 48	Standard	0.05~1.00 ～ 1.01~3.00	Vibration Insulation	Angular Misalignment / Eccentricity	10001~78000	Alloy	0.5 ～ 3	2	0.2	Coupling Main Body	0.02~0.2	19000 ～ 39000	Polyurethane	-	-

From: 340,063 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Super zero Oldham couplings series SCZ type stainless steel.

NIHON MINIATURE

Stainless steel hub (boss part), with zero backlash. Stronger and more compact coupling.[Features]· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy· Stronger and more compact design, that can now be used with high precision equipment impossible until now.· Stainless steel series added, becoming 4 series, with further improvements.· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.

CAD ：: 2D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	4 ～ 28	4 ～ 28	20 ～ 60	33 ～ 65	Standard	3.01~5.00 ～ 50.01~100.00	High Torque ～ Small	Angular Misalignment / Eccentricity	4001~10000	Stainless Steel	3.432 ～ 98.067	1	1.5 ～ 2	Coupling Main Body	1.1~3.0	5000 ～ 6000	Others	-	-

From: 1,721,474 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

K-7 Coupling SD Series

KAYSEVEN

Compact, high-performance eccentricity absorbing, non-reactive force product with no backlash. Widely used in robots, medical equipment, packaging machinery, and machine tools etc.

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 9525	3 ～ 10	17.5 ～ 25.5	24.9 ～ 32	Standard	1.01~3.00 ～ 3.01~5.00	Low Moment of Inertia ～ Vibration Insulation	Not Provided	4001~10000 ～ 10001~78000	Aluminum / Plastic	1.76 ～ 3.67	-	-	Coupling Main Body	-	10000 ～ 15000	Polyacetal	-	-

From: 142,968 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling - Set Screw Type - RABK

COUP-LINE

Coupling with a relatively large misalignment tolerance. Set screw type product. LINK Coupling and support unit manufacturer with headquarters in Guangzhou, China where the industry is thriving. LINK The company's couplings are attractive, having a wide selection of international standards, and much variety.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	8	14	32	33	Standard	10.01~20.00	High Torque ～ No Backlash	Angular Misalignment / Eccentricity	4001~10000	Aluminum	11	3	2.4	Coupling Main Body	1.1~3.0	4700	Polyacetal	-	-

From: 1,190,178 VND
Days to Ship: Số ngày giao hàng: 27 Day(s)

27 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling APJ/APJU

ADVANCED

· Small but strong coupling with excellent durability· Approximately twice the regular torque compared to ASJ/ASJU

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 20	3 ～ 20	12 ～ 38	14.4 ～ 39.7	Standard	1.01~3.00 ～ 20.01~50.00	High Durability ～ Small	Angular Misalignment / Eccentricity / Axial Misalignment	2001~4000 ～ 4001~10000	Stainless Steel	2.5 ～ 50	0.6	0.3 ～ 0.6	Coupling Main Body	0.21~0.40 ～ 0.41~1.0	4000 ～ 10000	Aluminum Bronze	-	-

From: 729,395 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Coupling FSPJ/FSPJU

ADVANCED

· The Strongest Oldham· Combination of stainless steel hubs and aluminum-bronze slider: All-metal Oldham coupling· The minimum clearance of the slider part is filled with ultra-high viscosity grease for preventing seizure and achieving zero backlash· Damage will not occur even with an impact torque that is 4 times greater than the allowable torque (FSPJU)

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	15 ～ 35	15 ～ 35	45 ～ 70	43.6 ～ 57	Standard / Servo Motor	20.01~50.00 ～ 100 < 500	High Torsional Rigidity	Angular Misalignment / Eccentricity / Axial Misalignment	4001~10000	Stainless Steel	50 ～ 160	0.2 ～ 0.5	0.8 ～ 1.6	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	5000 ～ 10000	Aluminum Bronze	-	-

From: 4,673,678 VND
Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Spacers (for MFJ/MFJC)

MISUMI

[Features]·This is an Oldham type coupling for large diameters. ·It can be used as a maintenance product.

Volume Discount

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	Maintenance Components	-	-	-	-	-

From: 1,030,519 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Oldham Couplings - Super Short Clamping

MISUMI

This coupling has a larger allowable torque and a shorter overall length than conventional products.

CAD ：: 2D / 3D

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 10	3 ～ 10	12 ～ 25	13.5 ～ 22.5	Standard	0.05~1.00 ～ 1.01~3.00	Low Moment of Inertia ～ Small	Angular Misalignment / Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.3 ～ 1.6	1.5	0.3 ～ 1.2	Coupling Main Body	0.21~0.40 ～ 1.1~3.0	5000 ～ 12000	Polyacetal	-	-

6 Day(s) or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Type
Shaft Bore Dia. (machined) D1(Ø)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Application
Allowable Torque Range(N•m)
Features
Allowable Misalignment
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Allowable Angular Misalignment(deg)
Allowable Lateral Misalignment(mm)
Product Category
Allowable Lateral Misalignment Range(mm)
Max. Rotational Speed(r/min)
Buffer Material
Disc Material
Bellows Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/12/2024	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/12/2024	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUNGIL	MISUMI MiSUMi Economy	NABEYA BI-TECH	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	JIT COUPLING	MISUMI	NABEYA BI-TECH	MISUMI	SUNGIL	MISUMI	MISUMI	MISUMI	JIT COUPLING	SUNGIL	MISUMI	JIT COUPLING	NABEYA BI-TECH	MITSUBOSHI BELTING	KASCO	MISUMI	MIGHTY	NIHON MINIATURE	MISUMI	MIGHTY	NABEYA BI-TECH	KAYSEVEN	JIT COUPLING	ADVANCED	KAYSEVEN	MISUMI	NABEYA BI-TECH	NIHON MINIATURE	MIGHTY	MISUMI	NABEYA BI-TECH	NIHON MINIATURE	KAYSEVEN	COUP-LINE	ADVANCED	ADVANCED	MISUMI	MISUMI
Product SeriesDòng sản phẩm	OLDHAM Type Coupling (SOH Series)	Oldham Couplings Clamping Type	MOR Flexible Coupling - Oldham Type	Oldham Couplings Clamping Type	Oldham Couplings Set Screw Type	Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers	Oldham Couplings Set Screw Type	Peak Oldham Coupling OCP-C Clamping Screw Type	Oldham Couplings - Clamping	MOM Flexible Coupling - Oldham Type	Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping	Oldham Coupling -Clamping Short Type - [SOHM-16C]	Coupling Oldham set screw type	Oldham Couplings - Clamping / Set Screw	Oldham Couplings - High Rigidity, Clamping	Oldham Coupling, Clamping-Screw Type OC-C	Oldham Coupling - Clamping Type -	Oldham Couplings - High Rigidity, Set Screw	Oldham Coupling, Clamping Screw / Set Screw Combined Type OC-CS	MOL Flexible Coupling - Oldham Type	HYPERFLEX Coupling, MT Type	Oldham Coupling KOH Series	Oldham Couplings - Spacers (for MCO/MCOC)	Oldham Couplings MJ series	Super zero Oldham coupling series MCZ type aluminum alloy products	Couplings/Oldham/Clamping/Set Screw	Oldham/Coupling MJX Series	MOS Flexible Coupling - Oldham Type	K Flex Couplings C Model (Single Model)	Oldham Coupling, Set-Screw Type OC-S	Oldham Coupling ASJ/ASJU	K-7 coupling MD series	Oldham Couplings - Clamping / Set Screw - Spacers (for CPO, CPOC, CPOCG)	MOHS-C Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (Vespel) - Clamping Type	Super zero Oldham coupling series CCZ type aluminum alloy products	Oldham Couplings MJC series	Sleeved Couplings - Sleeved Set Screw	MSF Flexible Coupling-Serration Type	Super zero Oldham couplings series SCZ type stainless steel.	K-7 Coupling SD Series	Oldham Coupling - Set Screw Type - RABK	Oldham Coupling APJ/APJU	Oldham Coupling FSPJ/FSPJU	Oldham Couplings - Spacers (for MFJ/MFJC)	Oldham Couplings - Super Short Clamping
CADCAD	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D		2D	2D / 3D		2D / 3D		2D / 3D			2D / 3D	2D / 3D	2D		2D / 3D	2D / 3D	2D		2D / 3D			2D / 3D	2D / 3D
From	407,683 VND	206,749 VND Special Price On Sale Till 31/12/2024	282,158 VND		207,456 VND Special Price On Sale Till 31/12/2024			968,524 VND		550,438 VND		407,683 VND				275,440 VND	463,658 VND		234,660 VND	399,980 VND	285,101 VND	368,650 VND	163,898 VND	114,570 VND	997,090 VND	491,402 VND	8,740,876 VND	707,000 VND	2,421,862 VND	191,500 VND	374,408 VND	146,953 VND	56,926 VND	6,842,261 VND	597,154 VND	1,544,445 VND		340,063 VND	1,721,474 VND	142,968 VND	1,190,178 VND	729,395 VND	4,673,678 VND	1,030,519 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	11 Day(s)	Same day or more	6 Day(s) or more	11 Day(s) or more	8 Day(s)	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s)	10 Day(s) or more	6 Day(s) or more	10 Day(s) or more	Same day or more	8 Day(s) or more	6 Day(s) or more	Same day or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	27 Day(s)	8 Day(s) or more	14 Day(s) or more	Same day or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật
Type	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham	Oldham
Shaft Bore Dia. (machined) D1(Ø)	3 ～ 35	5 ～ 14	1 ～ 38	4 ～ 38	3 ～ 14	14 ～ 38	4 ～ 40	4 ～ 22	4 ～ 20	3 ～ 42	15 ～ 35	3 ～ 35	1 ～ 20	3 ～ 16	4 ～ 20	3 ～ 30	3 ～ 28	4 ～ 20	3 ～ 22	3 ～ 25	-	3 ～ 28	-	2 ～ 56	3 ～ 25	6.35	14 ～ 60	1 ～ 14	-	3 ～ 22	1 ～ 20	-	-	5 ～ 14	1 ～ 40	3 ～ 30	3 ～ 14	3 ～ 15	4 ～ 28	3 ～ 9525	8	3 ～ 20	15 ～ 35	-	3 ～ 10
Shaft Bore Dia. (machined) D2(Ø)	3 ～ 35	5 ～ 14	1 ～ 38	4 ～ 38	3 ～ 14	14 ～ 38	4 ～ 40	4 ～ 22	4 ～ 20	3 ～ 42	15 ～ 35	3 ～ 35	1 ～ 20	3 ～ 16	4 ～ 20	3 ～ 30	3 ～ 28	4 ～ 20	3 ～ 22	3 ～ 25	-	3 ～ 28	-	2 ～ 30	3 ～ 35	10	14 ～ 60	1 ～ 14	-	3 ～ 22	1 ～ 20	-	-	5 ～ 14	3 ～ 40	3 ～ 30	3 ～ 14	3 ～ 15	4 ～ 28	3 ～ 10	14	3 ～ 20	15 ～ 35	-	3 ～ 10
Outer Dia. A(Ø)	16 ～ 118	16 ～ 32	6 ～ 68	16 ～ 70	16 ～ 32	44 ～ 70	16 ～ 70	20 ～ 42	14.5 ～ 38	12 ～ 70	45 ～ 70	16 ～ 73	6 ～ 38	12 ～ 40	14.5 ～ 38	16 ～ 54	16 ～ 118	14.5 ～ 38	16 ～ 42	16 ～ 63	60 ～ 225	16 ～ 73	-	6.4 ～ 118	18 ～ 70	25	70 ～ 118	8 ～ 32	81 ～ 276	16 ～ 42	6 ～ 38	35 ～ 160	-	19 ～ 31.7	16 ～ 80	19.1 ～ 57	16 ～ 32	16 ～ 32	20 ～ 60	17.5 ～ 25.5	32	12 ～ 38	45 ～ 70	-	12 ～ 25
Overall Length W(mm)	21 ～ 138	29 ～ 45	8.4 ～ 77	29 ～ 77	18 ～ 33	46 ～ 77	18 ～ 77	-	18.4 ～ 40	15 ～ 68.6	43.6 ～ 57	21 ～ 77	8.4 ～ 40	14.9 ～ 50	18.4 ～ 39.5	22 ～ 58	23.6 ～ 138	16 ～ 39.5	21 ～ 45	18 ～ 70.6	72 ～ 238	17.9 ～ 81.5	-	5.1 ～ 77.8	25 ～ 53	28	82.6 ～ 141	12.7 ～ 33.3	52.8 ～ 209.2	20 ～ 42	8.4 ～ 118.8	54 ～ 164	-	22.1 ～ 33.3	20 ～ 61	22 ～ 77.8	27 ～ 48	27 ～ 48	33 ～ 65	24.9 ～ 32	33	14.4 ～ 39.7	43.6 ～ 57	-	13.5 ～ 22.5
Application	Standard / Stepping Motor	Standard	Standard / Stepping Motor	Standard / Servo Motor / Stepping Motor	Standard	Standard	Standard / Servo Motor / Stepping Motor	Standard	Standard	Standard	Standard	Standard / Stepping Motor	Standard	Standard	Standard	Standard	Standard / Stepping Motor	Standard	Standard	Standard / Stepping Motor	-	Standard / Stepping Motor	-	Standard / Servo Motor / Stepping Motor / Encoder	Standard	-	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Stepping Motor	Standard / Servo Motor	Standard	Standard	Standard	-	Standard / Stepping Motor	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Servo Motor	-	Standard
Allowable Torque Range(N•m)	1.01~3.00 ～ 100 < 500	0.05~1.00 ～ 3.01~5.00	0.05~1.00 ～ 100 < 500	-	0.05~1.00 ～ 3.01~5.00	20.01~50.00 ～ 50.01~100.00	-	-	1.01~3.00 ～ 20.01~50.00	5.01~10.00 ～ 100 < 500	20.01~50.00 ～ 50.01~100.00	1.01~3.00 ～ 50.01~100.00	0.05~1.00 ～ 20.01~50.00	0.05~1.00 ～ 5.01~10.00	1.01~3.00 ～ 20.01~50.00	-	1.01~3.00 ～ 100 < 500	1.01~3.00 ～ 20.01~50.00	-	0.05~1.00 ～ 20.01~50.00	5.01~10.00 ～ 1000 < 5000	-	-	0.05~1.00 ～ 20.01~50.00	1.01~3.00 ～ 100 < 500	-	100 < 500	0.05~1.00 ～ 1.01~3.00	100 < 500 ～ 5000 < 10000	-	0.05~1.00 ～ 20.01~50.00	5.01~10.00 ～ 100 < 500	-	0.05~1.00 ～ 1.01~3.00	1.01~3.00 ～ 100 < 500	1.01~3.00 ～ 20.01~50.00	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 1.01~3.00	3.01~5.00 ～ 50.01~100.00	1.01~3.00 ～ 3.01~5.00	10.01~20.00	1.01~3.00 ～ 20.01~50.00	20.01~50.00 ～ 100 < 500	-	0.05~1.00 ～ 1.01~3.00
Features	No Backlash ～ Vibration Insulation	High Torque	High Torque	High Torque ～ High Torsional Rigidity	High Torque	High Torque ～ Low Moment of Inertia	High Torque ～ High Torsional Rigidity	-	High Torque ～ Low Moment of Inertia	High Torque ～ High Torsional Rigidity	High Torque ～ High Torsional Rigidity	No Backlash ～ Vibration Insulation	High Torque ～ Low Moment of Inertia	Low Moment of Inertia	High Torque ～ Low Moment of Inertia	Low Moment of Inertia ～ Vibration Insulation	No Backlash ～ Vibration Insulation	High Torque ～ Low Moment of Inertia	Low Moment of Inertia ～ Vibration Insulation	-	-	High Torque	-	High Accuracy ～ Vibration Insulation	High Torque ～ Small	-	High Accuracy ～ Vibration Insulation	-	High Torque ～ No Backlash	Low Moment of Inertia ～ Vibration Insulation	High Durability ～ Vibration Insulation	Small ～ Vibration Insulation	-	Clean Environment ～ Vibration Insulation	High Torque ～ Small	High Accuracy ～ Vibration Insulation	Low Moment of Inertia	Vibration Insulation	High Torque ～ Small	Low Moment of Inertia ～ Vibration Insulation	High Torque ～ No Backlash	High Durability ～ Small	High Torsional Rigidity	-	Low Moment of Inertia ～ Small
Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	-	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity / Axial Misalignment	-	-	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity / Axial Misalignment	-	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	-	Angular Misalignment / Eccentricity	Not Provided	-	Not Provided	Not Provided / Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Axial Misalignment	-	Angular Misalignment / Eccentricity	Not Provided	Not Provided	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity	Not Provided	Angular Misalignment / Eccentricity	Angular Misalignment / Eccentricity / Axial Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Not Provided	Angular Misalignment / Eccentricity
Max. Rotational Speed Range(r/min)	2001~4000 ～ 4001~10000	4001~10000	4001~10000 ～ 78001~	-	4001~10000	4001~10000 ～ 10001~78000	-	-	4001~10000	1001~2000	4001~10000	2001~4000 ～ 4001~10000	4001~10000 ～ 10001~78000	10001~78000	2001~4000 ～ 4001~10000	-	2001~4000 ～ 4001~10000	2001~4000 ～ 4001~10000	-	4001~10000 ～ 10001~78000	2001~4000 ～ 4001~10000	-	-	-	4001~10000 ～ 10001~78000	-	-	10001~78000	4001~10000 ～ 10001~78000	-	4001~10000 ～ 10001~78000	2001~4000 ～ 4001~10000	-	1001~2000	10001~78000	-	10001~78000	10001~78000	4001~10000	4001~10000 ～ 10001~78000	4001~10000	2001~4000 ～ 4001~10000	4001~10000	-	4001~10000 ～ 10001~78000
Body Material	Aluminum / Aluminum Alloy	Aluminum	Aluminum	Aluminum Alloy	Aluminum Alloy	Aluminum	Aluminum Alloy	Aluminum	Stainless Steel	Steel	Stainless Steel	Aluminum / Aluminum Alloy	Stainless Steel	Aluminum	Stainless Steel	Aluminum	Aluminum	Stainless Steel	Aluminum	Aluminum	-	Aluminum Alloy	-	Aluminum / Alloy	Aluminum	Aluminum	Aluminum	Aluminum	Steel	Aluminum	Stainless Steel	Steel / Aluminum / Plastic	-	Stainless Steel	Aluminum	Aluminum	Alloy	Alloy	Stainless Steel	Aluminum / Plastic	Aluminum	Stainless Steel	Stainless Steel	-	Aluminum
Allowable Torque(N•m)	1 ～ 200	0.7 ～ 4.5	0.4 ～ 160	0.7 ～ 56	0.7 ～ 4.5	26 ～ 80	0.7 ～ 56	-	1.6 ～ 28	5.4 ～ 352	50 ～ 160	1 ～ 65	0.3 ～ 28	0.2 ～ 9	3 ～ 50	-	2.5 ～ 200	3 ～ 50	-	0.7 ～ 36	9.81 ～ 1370	1 ～ 65	-	0.06 ～ 37.5	2.452 ～ 176.52	2	117 ～ 400	0.08 ～ 2.8	100 ～ 7000	-	0.3 ～ 28	9.8 ～ 294	-	0.4 ～ 2.2	1.961 ～ 215.746	1.7 ～ 37.5	0.5 ～ 3	0.5 ～ 3	3.432 ～ 98.067	1.76 ～ 3.67	11	2.5 ～ 50	50 ～ 160	-	0.3 ～ 1.6
Allowable Angular Misalignment(deg)	1.5 ～ 2	3	3	3	3	2	3	2	3	2	1	2	3	2 ～ 3	1.5	2	1.5 ～ 2	1.5	2	3	-	1.5	-	1	1	3	1	2	0.7 ～ 1	2	1.5 ～ 2	-	-	2	1	1	2	2	1	-	3	0.6	0.2 ～ 0.5	-	1.5
Allowable Lateral Misalignment(mm)	1 ～ 4.5	1 ～ 2.5	0.5 ～ 4.5	0.8 ～ 3.5	1 ～ 2.5	1 ～ 2	0.8 ～ 3.8	1.2 ～ 2.8	0.8 ～ 2.5	0.3 ～ 1.4	0.8 ～ 1.6	1 ～ 3.5	0.3 ～ 2.5	0.6 ～ 3	0.5 ～ 1	1 ～ 3.5	1 ～ 4.5	0.5 ～ 1	1 ～ 3	1 ～ 4	-	1 ～ 3.5	-	0.8 ～ 7	1.5 ～ 2.5	2	8 ～ 12	0.5 ～ 2	-	1 ～ 3	0.3 ～ 0.7	-	-	1.3 ～ 2	1.5 ～ 2.5	2.4 ～ 7	0.2	0.2	1.5 ～ 2	-	2.4	0.3 ～ 0.6	0.8 ～ 1.6	-	0.3 ～ 1.2
Product Category	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body / Maintenance Components	Coupling Main Body	Maintenance Components	-	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body	Maintenance Components	Coupling Main Body	Coupling Main Body	-	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Maintenance Components	Coupling Main Body
Allowable Lateral Misalignment Range(mm)	0.41~1.0 ～ 3.1~5.0	0.41~1.0 ～ 1.1~3.0	0.41~1.0 ～ 3.1~5.0	-	0.41~1.0 ～ 1.1~3.0	0.41~1.0 ～ 1.1~3.0	-	-	0.41~1.0 ～ 1.1~3.0	0.21~0.40 ～ 1.1~3.0	0.41~1.0 ～ 1.1~3.0	1.1~3.0 ～ 3.1~5.0	0.21~0.40 ～ 1.1~3.0	0.41~1.0 ～ 1.1~3.0	0.41~1.0	-	0.41~1.0 ～ 3.1~5.0	0.41~1.0	-	0.41~1.0 ～ 3.1~5.0	-	-	-	0.41~1.0 ～ 5.1~100	1.1~3.0	-	5.1~100	0.41~1.0 ～ 1.1~3.0	-	-	0.21~0.40 ～ 1.1~3.0	-	-	1.1~3.0	1.1~3.0	1.1~3.0 ～ 5.1~100	0.02~0.2	0.02~0.2	1.1~3.0	-	1.1~3.0	0.21~0.40 ～ 0.41~1.0	0.41~1.0 ～ 1.1~3.0	-	0.21~0.40 ～ 1.1~3.0
Max. Rotational Speed(r/min)	3000 ～ 8000	10000	9000 ～ 100000	2500 ～ 9000	10000	8000 ～ 12000	2500 ～ 9000	-	5800 ～ 10000	2000	5000 ～ 10000	3000 ～ 8000	5800 ～ 12000	15000 ～ 52000	4000 ～ 8000	2700 ～ 8000	3200 ～ 8000	4000 ～ 8000	3000 ～ 8000	10000 ～ 39000	3600 ～ 6000	4500 ～ 13000	-	-	10000 ～ 25000	10000	-	19000 ～ 78000	3100 ～ 20000	3000 ～ 8000	5800 ～ 12000	4000 ～ 10000	-	900	15000 ～ 25000	-	19000 ～ 39000	19000 ～ 39000	5000 ～ 6000	10000 ～ 15000	4700	4000 ～ 10000	5000 ～ 10000	-	5000 ～ 12000
Buffer Material	Polyacetal	Polyacetal	Polyacetal	Nylon	Polyacetal	Polyacetal	Nylon	Polyacetal	Carbon Reinforced Resin	-	Aluminum Bronze	Polyacetal	Carbon Reinforced Resin	Polyacetal	Aluminum Bronze	Polyacetal	Polyacetal	Aluminum Bronze	Polyacetal	Polyacetal	Carbon Reinforced Resin / Polyurethane	Polyacetal	-	Polyacetal / Nylon / PEEK / Others	Others	Polyacetal	Polyacetal	Polyacetal	-	Polyacetal	Carbon Reinforced Resin	Polyacetal	-	Vespel	Others	Polyacetal	-	Polyurethane	Others	Polyacetal	Polyacetal	Aluminum Bronze	Aluminum Bronze	-	Polyacetal
Disc Material	Aluminum	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Aluminum	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Bellows Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. (machined) D1(Ø)
1

1.5

2

2.5

3

3.17

3.2

4

4.5

4.76

5

6

6.35

7

7.93

8

9

9.5

9.52

9.525

9.53

10

11

12

12.7

13

14

15

15.875

16

17

18

19

20

20.5

21

22

23

24

25

25.4

26

27

28

29

30

30.5

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

50

52

55

56

58

60

65

70

75

78

80

0635

09525
Drawing

ClearTrống

Shaft Bore Dia. (machined) D2(Ø)
1

1.5

2

2.4

2.5

3

3.17

3.2

4

4.5

4.76

5

6

6.35

7

7.93

8

9

9.252

9.5

9.52

9.525

9.53

10

11

12

12.7

13

14

15

15.875

16

17

18

19

20

21

22

23

24

25

25.4

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

48

50

52

55

56

58

60

65

70

75

78

80
Drawing

ClearTrống

Outer Dia. A(Ø)
6

6.4

8

9

9.5

10

12

12.7

13

13.5

13.8

14

14.5

15

16

16.1

16.5

16.6

16.8

17

17.5

17.8

18

19

19.1

19.5

20

21

22

22.2

22.5

23.8

24

24.5

25

25.4

25.5

26

26.2

26.5

26.6

27

27.3

28

28.8

29

29.5

30

31.7

31.8

32

32.8

33

33.3

34

34.4

34.5

35

36

37.8

38

39

39.5

40

41.3

42

42.5

42.8

43

44

44.5

45

46

47

48

49

50

53

53.6

54

54.5

54.8

55

56

57

58

60

63

64

65

66

68

69

69.9

70

73

75

79

79.5

80

81

82

83

85

87

88

90

93

94

94.5

95

99

100

102

104

104.5

105

112

117

118

120

125

126

135

138

140

143

144

150

152

155

160

161

168

170

178

185

190

194

200

210

214

225

246

262

276

308

346
Drawing

ClearTrống

Overall Length W(mm)
5.1

7.3

8.4

9

9.4

9.6

10

10.2

10.5

11.2

11.4

11.8

11.9

12

12.35

12.4

12.7

13

13.5

14

14.2

14.4

14.5

14.6

14.7

14.9

15

15.4

15.5

15.6

15.7

15.8

15.9

16

16.2

16.5

16.6

16.7

17

17.4

17.5

17.6

17.8

17.9

18

18.1

18.4

18.5

18.7

18.8

19

19.1

19.2

19.35

19.4

19.6

19.7

19.8

20

20.2

20.4

20.5

21

21.1

21.2

21.3

21.4

21.5

21.6

22

22.1

22.2

22.4

22.5

22.8

23

23.05

23.1

23.15

23.2

23.3

23.4

23.5

23.6

23.9

24

24.1

24.2

24.4

24.5

24.9

25

25.4

25.45

25.5

25.6

25.7

25.9

26

26.1

26.2

26.5

26.6

27

27.2

27.3

27.4

28

28.1

28.2

28.3

28.4

28.5

28.8

29

29.4

29.5

29.8

30

30.2

30.4

30.5

31

31.2

31.4

31.5

31.6

31.7

31.8

32

32.2

32.3

32.5

32.6

32.7

32.8

33

33.2

33.3

33.5

33.6

33.8

34

34.1

34.2

34.3

34.4

34.5

35

35.5

35.6

36

36.1

36.4

36.5

36.8

37

37.2

37.4

37.8

38

38.2

38.4

38.5

38.6

39

39.2

39.4

39.5

39.7

39.8

40

40.5

41

41.8

42

42.2

43

43.2

43.4

43.5

43.6

43.8

44

44.2

44.5

44.7

44.8

45

45.1

45.2

45.3

45.5

46

46.1

46.4

46.6

47

47.1

47.2

47.6

48

48.4

49

49.2

49.4

50

50.2

50.5

50.6

50.8

51

51.2

51.3

51.4

52

52.8

53

53.3

53.4

53.6

54

54.1

54.4

54.5

54.6

55

55.5

56

56.1

56.2

56.5

56.6

56.8

57

57.5

58

58.2

58.5

58.6

59

59.4

59.7

59.8

59.9

60

60.4

60.5

61

61.2

62

63

63.4

63.5

63.6

63.7

63.8

64

64.8

65

65.4

65.6

66

66.4

66.6

66.7

66.8

67

67.1

67.5

68

68.3

68.5

68.6

68.7

68.8

69.2

69.5

69.6

69.8

70

70.5

70.6

70.9

71

71.2

72

72.4

73

73.3

74

74.4

74.8

75

75.5

75.6

75.9

76.2

77

77.2

77.6

77.8

78

78.8

79.5

79.8

80

80.8

81

81.5

81.8

82

82.5

82.6

83

83.6

84

84.7

85

85.2

85.5

85.6

86

87.6

88

89.2

89.3

89.5

89.6

89.8

89.9

90

90.5

90.8

91

92

93.6

94

95

95.6

96

96.6

97

97.2

98

98.5

98.6

98.7

99

99.2

99.6

100

100.2

101

101.6

102

102.5

104

104.4

105.8

106

107.6

108

109

110

111

112.8

113

113.4

114

115

115.6

117.6

118

118.4

118.8

119.6

120

120.8

121

123.6

124

125

126

127

129

129.6

130

131

136.4

137.6

138

138.7

140

141

144

144.2

146

147

150

150.6

153.0

154

154.6

156.4

160

164

164.6

170.6

176

178.4

182.8

185

192.4

193

200

208.8

209.2

210

216

217

218

223

238

241.2

249.4

260

286.8

290

307.0

335

337.2

377

391

421

607
Drawing

ClearTrống

Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
ClearTrống

Allowable Torque Range(N•m)
0.05~1.00

1.01~3.00

3.01~5.00

5.01~10.00

10.01~20.00

20.01~50.00

50.01~100.00

100 < 500

500 < 1000

1000 < 5000

5000 < 10000

10000 < 20000

20000 < 50000
ClearTrống

Features
Clean Environment

Heat Resistant

High Accuracy

High Durability

High Torque

High Torsional Rigidity

Low Moment of Inertia

No Backlash

Small

Standard (Input Prohibited)

Unfinished Shaft Bore

Vacuum Environment

Vibration Insulation
ClearTrống

Allowable Misalignment
- Not Provided
- Angular Misalignment
- Eccentricity
- Axial Misalignment
Larger Image

ClearTrống

Max. Rotational Speed Range(r/min)
100~ 300

1001~2000

2001~4000

4001~10000

10001~78000

78001~
ClearTrống

Body Material
- Stainless Steel
- Steel
- Aluminum
- Alloy
- Plastic
- Aluminum Alloy
ClearTrống

Allowable Torque(N•m)
0.05

0.06

0.08

0.1

0.12

0.147

0.15

0.16

0.18

0.196

0.2

0.21

0.22

0.25

0.3

0.31

0.343

0.35

0.392

0.4

0.42

0.5

0.54

0.55

0.6

0.65

0.7

0.7845

0.8

0.84

0.9

1

1.1

1.2

1.275

1.3

1.4

1.5

1.6

1.7

1.76

1.8

1.9

1.961

2

2.1

2.2

2.3

2.4

2.452

2.5

2.6

2.8

3

3.2

3.3

3.4

3.432

3.5

3.6

3.67

3.8

3.923

4

4.2

4.4

4.5

4.7

4.8

4.9

5

5.4

5.5

5.6

5.7

5.8

6

6.3

6.4

6.6

6.8

6.865

6.9

7

7.2

7.4

7.5

8

8.4

9

9.4

9.6

9.8

9.807

9.81

10

11

11.2

12

12.5

12.6

13

13.1

13.5

14

14.7

15

15.4

16

17

17.65

17.652

18

19

19.7

20

21

22

23

24

24.5

25

26

27

28

29

29.42

30

31

31.5

32

33

34

34.3

35

36

37.3

37.5

38

39.227

40

41

42

44

44.13

45

46

48

49

49.033

50

51

52

53.9

54

55

56

60

61

65

67

68

70

71

72

75

78.5

79

80

84

85

89

90

92

95

96

98.067

100

105

107

108

110

114

117

118

120

121

123

130

132

135

137

140

150

151

157

160

170

176

176.52

180

188

190

194

196

198

200

210

215.746

220

226

239

245

250

258

260

265

270

294

300

310

314

320

325

352

380

400

441

450

480

525

530

580

588

600

620

637

650

740

800

810

850

883

900

980

1000

1050

1120

1300

1370

1700

2000

2100

3400

4000

5000

5400

7000

8000

10000

15000

20000
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
ClearTrống

Allowable Angular Misalignment(deg)
0.1

0.15

0.2

0.5

0.6

0.7

1

1.2

1.3

1.4

1.5

1.6

2

2.5

3

3.5

4

5

6

8

10

14
ClearTrống

Allowable Lateral Misalignment(mm)
0

0.01

0.02

0.03

0.05

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.17

0.18

0.2

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.3

0.31

0.32

0.33

0.34

0.35

0.36

0.38

0.4

0.44

0.45

0.46

0.47

0.48

0.5

0.51

0.52

0.54

0.55

0.58

0.6

0.63

0.64

0.68

0.7

0.8

0.82

0.84

0.9

0.91

0.92

1

1.05

1.08

1.1

1.12

1.2

1.3

1.33

1.4

1.5

1.6

1.61

1.9

2

2.1

2.3

2.4

2.5

2.6

2.8

2.9

3

3.2

3.3

3.5

3.8

4

4.5

5

6

7

8

10

12
ClearTrống

Product Category
- Coupling Main Body
- Maintenance Components
ClearTrống

Allowable Lateral Misalignment Range(mm)
Less than 0.02

0.02~0.2

0.21~0.40

0.41~1.0

1.1~3.0

3.1~5.0

5.1~100
ClearTrống

Max. Rotational Speed(r/min)
7,700

9,000

12,000

14,000

16,000

17,000

18,000

20,000

24,000

27,000

30,000

40,000

250

900

2000

2350

2500

2550

2700

2800

2900

3000

3100

3150

3200

3400

3500

3600

3750

3800

4000

4200

4300

4400

4500

4700

4800

5000

5100

5200

5250

5500

5800

5900

6000

6200

6500

6800

7000

7400

7500

7600

7700

7900

8000

8200

8400

8500

8700

9000

9200

9500

9600

9800

10000

11000

11900

12000

13000

14000

15000

15900

16000

17000

18000

19000

20000

21000

22000

23000

23800

24000

25000

26000

27000

30000

31000

32000

33000

34000

34100

35000

37000

39000

40000

42000

45000

52000

63000

78000

100000
ClearTrống

Buffer Material
- Carbon Reinforced Resin
- Polyacetal
- Polyurethane
- Nylon
- Vespel
- PEEK
- Aluminum Bronze
- Others
- Nitrile
- Fluororubber
ClearTrống

Disc Material
- Stainless Steel
- Polyimide
- Carbon Fiber
- Aluminum
- Glass Fiber Reinforced Resin
- Polyacetal
ClearTrống

Bellows Material
- Stainless Steel
- Phosphor Bronze
- Others
ClearTrống

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

back next

Related Categories to Flexible Shaft CouplingsDanh mục liên quan đến Flexible Shaft Couplings

FAQ Flexible Shaft Couplings

Question: What are the different types of flexible Shaft Couplings?: Answer: There are several types of flexible Shaft Couplings, including beam, bellows, jaw, Oldham, disc, diaphragm, and gear couplings. Each type has unique features and benefits that make them suitable for different applications and environments. Flexible Shaft Couplings are used to connect two shafts and allow for misalignment while transmitting torque between them.
Question: What factors should be considered when selecting a flexible Shaft Couplings?: Answer: The factor for selecting a flexible coupling, there are several factors that should be considered, including the required torque capacity, misalignment capability, operating speed, and environmental factors such as temperature and humidity. Other considerations include the required degree of axial and radial stiffness, the space available for the coupling, and the type of equipment being connected. It is also important to consider the potential for wear and tear, maintenance requirements, and the cost of the coupling.
Question: How is a flexible Shaft Couplings installed and maintained?: Answer: Shaft Couplings are installed by aligning the shafts and tightening the screws or bolts. Maintenance involves regular inspections for signs of wear, damage, or misalignment. Lubrication is important to prevent excessive wear and reduce friction. Cleaning and tightening of bolts and screws are also necessary to ensure proper operation.
Question: What is the difference between a flexible coupling and a rigid coupling?: Answer: A flexible coupling allows for some misalignment between two connected shafts while transmitting torque, while a rigid coupling does not allow for any misalignment. Flexible Shaft Couplings are designed to absorb shock and vibration, which can help reduce wear and tear on connected equipment. Rigid couplings, on the other hand, are used in applications where precise alignment between shafts is critical, such as in high-speed rotating equipment or precision machinery.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

Flexible Shaft Couplings（Type：Oldham）

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. (machined) D1(Ø)

Shaft Bore Dia. (machined) D2(Ø)

Outer Dia. A(Ø)

Overall Length W(mm)

Application

Allowable Torque Range(N•m)

Features

Allowable Misalignment

Max. Rotational Speed Range(r/min)

Body Material

Allowable Torque(N•m)

Allowable Angular Misalignment(deg)

Allowable Lateral Misalignment(mm)

Product Category

Allowable Lateral Misalignment Range(mm)

Max. Rotational Speed(r/min)

Buffer Material

Disc Material

Bellows Material

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

Related Categories to Flexible Shaft CouplingsDanh mục liên quan đến Flexible Shaft Couplings

FAQ Flexible Shaft Couplings

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều