Universal Joints（Body Material：Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Universal Joints - Set Pin

  MISUMI

  [Features]·This is a coupling that allows the joining angle to be changed freely.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	5.01~10.00 ～ 100 < 500	-	12 ～ 51	31 ～ 139	-	Standard	Standard Type	-	Steel	5.3 ～ 495	-	-	-	-

  From: 401,406 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Universal Joints - Set Keyway / Tapped

  MISUMI

  [Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 20	20.01~50.00 ～ 50.01~100.00	-	19 ～ 36	42 ～ 139	-	Standard	Standard Type	-	Steel	20.1 ～ 175	-	-	-	-

  From: 936,684 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide SPS Series

  MIYOSHI KIKAI

  SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  5 ～ 38	-	-	5 ～ 35	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 595,218 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Power Type B Series

  MIYOSHI KIKAI

  [Features]· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	50 ～ 300	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	220 ～ 1700	-	-	-

  From: 737,496 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJ Series

  MIYOSHI KIKAI

  [Features]· With total hardening treatment for increased fatigue strength.· Additional machining cannot be performed on the hardened product.· To extend life, boots and oil pack should be used.· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.· With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	31 ～ 122	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	500 ～ 1800	-	-	-

  From: 844,910 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Coupling (SFC Series)

  SUNGIL

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  4 ～ 16	1.01~3.00	4 ～ 16	29 ～ 54	28 ～ 58	-	-	-	2001~4000	Steel	0.12 ～ 1.5	3000	1.1~3.0	2 ～ 3	10 ～ 12

  From: 472,650 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Strong Type BD Series

  MIYOSHI KIKAI

  [Features]· High torque normal use.· Material: S45C· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	75 ～ 485	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	160 ～ 1300	-	-	-

  From: 1,332,270 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, K Model

  MIYOSHI KIKAI

  [Features]·Grease-filled needle bearings are used, making them suitable for high-speed rotation.·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.·K-20 and above have a grease nipple.·When using boots, please use type B or type H.·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.·With keyway processing, the spring pins are not included.[Applications]·For high speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	62 ～ 178	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	950 ～ 2500	-	-	-

  From: 2,904,183 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

  MIYOSHI KIKAI

  [Features]·Joints with hexagonal shafts and intermediate shafts can be cut freely·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	105~232 ～ 399~599	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,900,359 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJD Type

  MIYOSHI KIKAI

  [Features]· With total hardening treatment for increased fatigue strength.· Additional machining cannot be performed on the hardened product.· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.· With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	49.5 ～ 195	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	380 ～ 1400	-	-	-

  From: 1,530,084 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, KD Model

  MIYOSHI KIKAI

  [Features]·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	96 ～ 275	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	730 ～ 2200	-	-	-

  From: 5,822,112 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  Standard Type, Precision Type H Series

  MIYOSHI KIKAI

  [Features]·The pin is dry lubricated to improve abrasion resistance.·Please use boots and oil packs to extend the life of the joints.·For B or T, please specify the new JIS key or the old JIS key.·With keyway processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	40 ～ 165	High Accuracy ～ High Durability	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	510 ～ 2000	-	-	-

  From: 1,210,556 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	130.5~238 ～ 444~1094	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,668,263 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Power Type With Spline Shaft B-PS Series

  MIYOSHI KIKAI

  [Features]· P series are short-lead, easy order type.· Comprising of 2 standard joints (SPS, and join slide SPA).· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).· When setting, please ensure symmetry of left / right joint assembly.· Please note, if set incorrectly, output shaft speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  20 ～ 60	-	-	40 ～ 120	324~806 ～ 760~1312	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 10,025,616 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model, M Model

  MIYOSHI KIKAI

  High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  2 ～ 5.5	-	-	6 ～ 10	15 ～ 30	Small	Standard	Standard Type	301~1000	Steel	-	700 ～ 1000	-	-	-

  From: 922,102 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model MM Model

  MIYOSHI KIKAI

  High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  1.5	-	-	3	12	Small	Standard	Standard Type	-	Steel	-	-	-	-	-

  From: 1,422,458 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide GX Series

  MIYOSHI KIKAI

  GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.[Features]· The hex shaft and sleeve can be cut at any position.· Cannot be used in sliding part while rotating.· When using as a slide unit, the NX slide unit should also be considered.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	11 ～ 54	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 613,483 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Precision S Model

  MIYOSHI KIKAI

  Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	34 ～ 220	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 2001~4000	Steel	-	280 ～ 2100	-	-	-

  From: 1,355,081 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, S-GX type

  MIYOSHI KIKAI

  [Features]·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 30	-	-	18 ～ 58	132~245 ～ 397~599	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 6,197,453 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Reinforced B-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]· Shaft can be freely cut at any point.· Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	162~270 ～ 553~711	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,090,478 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wheel attached type spline wheel attached joint strong type B-P type

  MIYOSHI KIKAI

  [Features]·Joints with hexagonal shafts and intermediate shafts can be cut freely·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	168.5~266.5 ～ 556~1185	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 3,242,358 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft attached type Joint with spline shaft Bearing type K-P model

  MIYOSHI KIKAI

  Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	219~450 ～ 556~1188.5	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 9,330,212 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)

  SHOWA SPRING

  OILES metal (bushing) is used for the bearing.Basically for manual rotation (remote control).[Features]・ The structure other than the inner shaft is exactly the same as the DS type, so its cost is low and it is durable・ Allowable transmission torque drops only to 80% even when rotating counterclockwise

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	1.01~3.00	-	32	-	High Accuracy ～ Vibration Insulation	Standard	Flexible Type	< 100	Steel	2.94	100	-	4,520	180

  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bearing K-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]· Comprises 2 standard joints and joint slide (GXS, GXA).· Joint and join slide are set with spring pin.· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.· Please note, if set incorrectly, output wheel speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	194~309 ～ 546~711	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 9,810,602 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

  MIYOSHI KIKAI

  [Features]·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	16 ～ 58	136.5~244 ～ 444~1095	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,401,403 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft joint, precise type H-P

  MIYOSHI KIKAI

  Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	148.5~252 ～ 530~1164	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 4,241,976 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Shaft Compact Design SF Type (Flexible Shaft)

  SHOWA SPRING

  Low power / high speed can be changed for transmission freely in the desired direction.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	0.05~1.00 ～ 1.01~3.00	-	-	150 ～ 300	-	Standard	Flexible Type	-	Steel	0.392 ～ 1.862	-	-	-	-

  From: 736,623 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Precision Type D Model

  MIYOSHI KIKAI

  [Features]· Spring pins included can be machined in the l/2 position simultaneously with the shaft.· To extend life, boots and oil pack should be used.· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.· With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	50 ～ 340	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	200 ～ 1500	-	-	-

  From: 2,933,890 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, H-GX type

  MIYOSHI KIKAI

  The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	131~250 ～ 517~685	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: 5,253,002 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI
Product SeriesDòng sản phẩm	Universal Joints - Set Pin	Universal Joints - Set Keyway / Tapped	Join Slide SPS Series	Standard Type, Power Type B Series	Standard Type Wear-Resistant HJ Series	Flexible Coupling (SFC Series)	Standard Type, Strong Type BD Series	Standard Bearing Model, K Model	Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model	Standard Type Wear-Resistant HJD Type	Standard Bearing Model, KD Model	Standard Type, Precision Type H Series	With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model	Joint Power Type With Spline Shaft B-PS Series	Standard Miniature Model, M Model	Standard Miniature Model MM Model	Join Slide GX Series	Standard Type Precision S Model	Type with shaft, joint with hexagonal shaft, precision type, S-GX type	Reinforced B-GX Type of Hexagonal Shaft Joint	Wheel attached type spline wheel attached joint strong type B-P type	Shaft attached type Joint with spline shaft Bearing type K-P model	Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)	Bearing K-GX Type of Hexagonal Shaft Joint	With Shaft Model Joints with Spline Shaft Accurate Model S-P Model	Shaft type spline, shaft joint, precise type H-P	Flexible Shaft Compact Design SF Type (Flexible Shaft)	Standard Precision Type D Model	Type with shaft, joint with hexagonal shaft, precision type, H-GX type
CADCAD	2D / 3D	2D / 3D	2D			2D / 3D											2D
From	401,406 VND Special Price On Sale Till 31/03/2025	936,684 VND	595,218 VND	737,496 VND	844,910 VND	472,650 VND	1,332,270 VND	2,904,183 VND	3,900,359 VND	1,530,084 VND	5,822,112 VND	1,210,556 VND	3,668,263 VND	10,025,616 VND	922,102 VND	1,422,458 VND	613,483 VND	1,355,081 VND	6,197,453 VND	4,090,478 VND	3,242,358 VND	9,330,212 VND		9,810,602 VND	4,401,403 VND	4,241,976 VND	736,623 VND	2,933,890 VND	5,253,002 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	4 Day(s) or more	10 Day(s) or more	10 Day(s) or more	7 Day(s) or more	17 Day(s) or more	7 Day(s) or more	4 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	17 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	7 Day(s) or more	10 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	6 ～ 30	10 ～ 20	5 ～ 38	6 ～ 60	6 ～ 30	4 ～ 16	6 ～ 60	10 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	20 ～ 60	2 ～ 5.5	1.5	6 ～ 30	6 ～ 60	8 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	-	10 ～ 30	6 ～ 30	6 ～ 30	-	6 ～ 60	6 ～ 30
Allowable Torque Range(N•m)	5.01~10.00 ～ 100 < 500	20.01~50.00 ～ 50.01~100.00	-	-	-	1.01~3.00	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.01~3.00	-	-	-	0.05~1.00 ～ 1.01~3.00	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	-	-	-	-	4 ～ 16	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Outer Dia. A(Ø)	12 ～ 51	19 ～ 36	5 ～ 35	12 ～ 120	12 ～ 51	29 ～ 54	12 ～ 120	20 ～ 60	12 ～ 51	12 ～ 51	20 ～ 60	12.5 ～ 57	12 ～ 51	40 ～ 120	6 ～ 10	3	11 ～ 54	16 ～ 115	18 ～ 58	12 ～ 60	12 ～ 60	20 ～ 60	32	20 ～ 60	16 ～ 58	12.5 ～ 57	-	16 ～ 115	12.5 ～ 57
Overall Length W(mm)	31 ～ 139	42 ～ 139	-	50 ～ 300	31 ～ 122	28 ～ 58	75 ～ 485	62 ～ 178	105~232 ～ 399~599	49.5 ～ 195	96 ～ 275	40 ～ 165	130.5~238 ～ 444~1094	324~806 ～ 760~1312	15 ～ 30	12	-	34 ～ 220	132~245 ～ 397~599	162~270 ～ 553~711	168.5~266.5 ～ 556~1185	219~450 ～ 556~1188.5	-	194~309 ～ 546~711	136.5~244 ～ 444~1095	148.5~252 ～ 530~1164	150 ～ 300	50 ～ 340	131~250 ～ 517~685
Features	-	-	-	High Torque	-	-	High Torque	-	-	-	-	High Accuracy ～ High Durability	-	High Torque	Small	Small	-	High Accuracy ～ Small	High Accuracy ～ Small	High Torque	High Torque	-	High Accuracy ～ Vibration Insulation	-	High Accuracy ～ Small	High Accuracy ～ High Durability	-	High Accuracy ～ Small	High Accuracy ～ High Durability
Application	Standard	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Type	Standard Type	Standard Type	Shaft Type	Standard Type	Standard Type	-	Standard Type	Standard Type	Shaft Type	Standard Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Standard Type	Standard Type	Shaft Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Flexible Type	Shaft Type	Shaft Type	Shaft Type	Flexible Type	Standard Type	Shaft Type
Max. Rotational Speed Range(r/min)	-	-	-	100~ 300 ～ 1001~2000	301~1000 ～ 1001~2000	2001~4000	100~ 300 ～ 1001~2000	301~1000 ～ 2001~4000	-	301~1000 ～ 1001~2000	301~1000 ～ 2001~4000	301~1000 ～ 1001~2000	-	-	301~1000	-	-	100~ 300 ～ 2001~4000	-	-	-	-	< 100	-	-	-	-	100~ 300 ～ 1001~2000	-
Body Material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Allowable Torque(N•m)	5.3 ～ 495	20.1 ～ 175	-	-	-	0.12 ～ 1.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.94	-	-	-	0.392 ～ 1.862	-	-
Max. Rotational Speed(r/min)	-	-	-	220 ～ 1700	500 ～ 1800	3000	160 ～ 1300	950 ～ 2500	-	380 ～ 1400	730 ～ 2200	510 ～ 2000	-	-	700 ～ 1000	-	-	280 ～ 2100	-	-	-	-	100	-	-	-	-	200 ～ 1500	-
Allowable Lateral Misalignment Range(mm)	-	-	-	-	-	1.1~3.0	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	-	-	-	-	2 ～ 3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4,520	-	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	-	-	-	-	10 ～ 12	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	180	-	-	-	-	-	-

Loading...Tải…