(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Shape
|
|
---|---|
Brand |
|
Filter By |
|
CAD |
|
Days to Ship |
|
46 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Both end machined rack with mount hole processing, saving the labor of additional work, at a reasonable price. Low price and usability, allowing connection of as many as needed.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 298.45 ~ 2049.88 | 0.5 ~ 6 | General Steel | Standard | 5 ~ 60 | Not Provided | Black Oxide | Not Provided | 26 ~ 435 | - | Provided | 300 ~ 2000 |
From: 1,260,972 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
[Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.Please specify desired dimensions in specification / dimensions on the left.Note: Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]Rack made from S45C, with rich selection of modules, lengths etc. at a reasonable price.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 20 ~ 505 | 0.5 ~ 10 | General Steel | Standard | 5 ~ 90 | Not Provided | Black Oxide | Not Provided | 3 ~ 159 | - | Not Provided | 100 ~ 500 |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Helical rack with a high contact gear ratio, and is effective for noise and vibration control. Both end face and mount hole processed type also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 95 ~ 1010 | 2 ~ 3 | General Steel | Helical | 25 ~ 35 | Not Provided | Black Oxide | Not Provided | 7 ~ 153 | - | Not Provided / Provided | 100 ~ 1000 |
From: 514,876 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Both ends machined rack, with rich selection of modules, lengths, etc. Low price and usability, allowing connection of as many as needed.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 298.45 ~ 2049.88 | 0.5 ~ 10 | General Steel | Standard | 5 ~ 90 | Not Provided | Black Oxide | Not Provided | 20 ~ 435 | - | Provided | 300 ~ 2000 |
From: 792,189 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ground Spur Helical Rack KRHGFD
KOHARA GEAR INDUSTRY
Ground helical rack in J series lineup
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 1005.31 | 1 ~ 3 | General Steel | Helical | 8 ~ 25 | Thermal Refined | Not Provided | Provided | 106 ~ 160 | - | Provided | 500 ~ 1000 |
From: 14,068,990 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ZST Hardened Gear Grinder Helical Rack
KOHARA GEAR INDUSTRY
A helical rack type with hardened gear teeth. Manufactured by Schneeberger AG.Rack angle size is of European specification, with a special torsion angle of 19°31'41.Mounting holes can be additionally machined freely anywhere except for the teeth, which are induction hardened.J-series is also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 1000 ~ 2000 | 2 | General Steel | Helical | 24 | Induction Hardened | Not Provided | Provided | 150 ~ 300 | - | Not Provided | 1000 ~ 2000 |
From: 17,613,636 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Carburized KHK peak performance rack. No.1 best performance ever KHK in both strength and precision. Additional work is possible on parts other than teeth as carburized.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 502.65 | 1.5 ~ 3 | General Steel | Standard | 15 ~ 30 | Others | Not Provided | Provided | 53 ~ 106 | - | Provided | 500 |
From: 13,397,193 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SRF series rack with induction hardening as standard, for high strength and reliable, long service life, and low cost. J-series available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 999.03 ~ 1005.31 | 1.5 ~ 6 | General Steel | Standard | 15 ~ 60 | Induction Hardened | Black Oxide | Not Provided | 53 ~ 212 | - | Provided | 1000 |
From: 4,537,140 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SUR/SURF/SURFD Stainless steel rack
KOHARA GEAR INDUSTRY
Stainless steel SUS304 used, ideal for rust adverse food machinery, scientific equipment, electronic devices etc. Mount hole processed type also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 505 ~ 1005.31 | 1 ~ 4 | Stainless Steel | Standard | 10 ~ 40 | Others | Not Provided | Not Provided | 39 ~ 212 | - | Not Provided / Provided | 500 ~ 1000 |
From: 2,715,320 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 303 | 0.5 ~ 1 | Brass | Standard | 3 ~ 6 | Not Provided | Not Provided | Not Provided | 94 ~ 190 | - | Not Provided | 300 |
From: 448,438 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
This is a dedicated gauge for assembling hardened tooth-polished helical racks manufactured by SCHNEEBERGER.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 59 ~ 66 | 1.5 ~ 2 | General Steel | Helical | 17 ~ 25 | Not Provided | Black Oxide | Provided | 7 ~ 9 | - | Provided | 59 ~ 66 |
From: 512,587 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Compared with conventional SRF rack, low cost and compact square-shaped product with the same tooth width and height. Any number of pieces can be added by processing both ends.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 999.03 ~ 1005.31 | 1.5 ~ 4 | General Steel | Standard | 15 ~ 40 | Not Provided | Black Oxide | Not Provided | 80 ~ 212 | - | Provided | 1000 |
From: 1,529,691 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
DIN6 grade, high-precision, ground helical rack, originating from Germany. Designed to adopt a special twist angle so that 1 rotation of pinion is a mm integer. Plus, the pinion gear is made to be a positive shift gear with increased strength, and the assembly distance is also an integer mm.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 1000 ~ 2000 | 3 ~ 6 | General Steel | Helical | 29 ~ 59 | Induction Hardened | Not Provided | Provided | 50 ~ 200 | - | Not Provided | 1000 ~ 2000 |
From: 20,575,568 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CP stainless steel rack SURCP/SURCPFD
KOHARA GEAR INDUSTRY
CP stainless steel rack, and CP stainless steel rack with mount holes added to J series.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 500 ~ 1000 | 1.5915 ~ 3.1831 | Stainless Steel | Standard | 15 ~ 30 | Others | Not Provided | Not Provided | 50 ~ 200 | - | Provided | 500 ~ 1000 |
From: 3,313,151 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Tempered SCM440 material, high-precision, strong, quiet, and wear resistant high quality, perpendicular to the teeth type ground helical rack.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 1005.31 | 1 ~ 3 | General Steel | Helical | 8 ~ 25 | Thermal Refined | Not Provided | Provided | 19 ~ 160 | - | Not Provided / Provided | 100 ~ 1000 |
From: 3,195,512 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP rack with bolt holes machined with full line-up.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 495 ~ 2050 | 0.7958 ~ 6.3662 | General Steel | Standard | 10 ~ 60 | Not Provided | Black Oxide | Not Provided | 25 ~ 410 | - | Provided | 500 ~ 2000 |
From: 1,513,560 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP tapered rack with tooth face processed into a tapered shape, combining CP tapered spur gear and backlash adjustment.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Tapered Rack | 1000 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Not Provided | Black Oxide | Not Provided | 100 ~ 200 | - | Provided | 1000 |
From: 6,308,573 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
J Series ZSTD Quenched Helical Toothed Rack
KOHARA GEAR INDUSTRY
A helical rack type with hardened gear teeth. Manufactured by Schneeberger AG.Rack angle size is of European specification, with a special torsion angle of 19°31'41.Mounting holes can be additionally machined freely anywhere except for the teeth, which are induction hardened.J-series is also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 1000 ~ 2000 | 2 | General Steel | Helical | 24 | Induction Hardened | Not Provided | Provided | 150 ~ 300 | - | Not Provided | 1000 ~ 2000 |
From: 19,278,991 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hardened Ground Tooth Rack SRG
KOHARA GEAR INDUSTRY
Tooth surface induction hardening applied to S45C material, for tooth surface hardness 50 to 60HRC, tooth surface ground finish KHK R001 3 grade series, reasonably priced hardened rack. Both end surface finished products can be connected and used for long lengths.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 1005.31 | 1 ~ 6 | General Steel | Standard | 10 ~ 60 | Induction Hardened | Black Oxide | Provided | 4 ~ 212 | - | Not Provided / Provided | 100 ~ 1000 |
From: 1,426,235 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP rack with 1 pinion rotation movement amount in integer length.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 2050 | 0.7958 ~ 6.3662 | General Steel | Standard | 10 ~ 60 | Not Provided | Black Oxide | Not Provided | 3 ~ 410 | - | Not Provided / Provided | 100 ~ 2000 |
From: 272,456 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KRG / KRGF / KRGD Tempered Gear Grinder Rack
KOHARA GEAR INDUSTRY
Ground rack made from thermal refined SCM440, with induction hardened teeth surface, for 51% stronger tooth surface than thermal refined only rack. J-series with mount hole processing also available
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 1005.31 | 1 ~ 3 | General Steel | Standard | 10 ~ 30 | Thermal Refined | Not Provided | Provided | 9 ~ 318 | - | Not Provided / Provided | 100 ~ 1000 |
From: 2,429,880 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion. S series with easy to machine shaft part also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Round Rack | 505 ~ 1010 | 1 ~ 5 | General Steel | Standard | - | Not Provided | Black Oxide | Not Provided | 39 ~ 159 | 10 ~ 50 | Not Provided | 500 ~ 1000 |
From: 1,581,035 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Molded flexible rack made by extrusion molding of Duracon®, that can be freely shaped.Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Flexible Rack | 2000 | 0.8 ~ 2 | Plastic | Standard | 3.8 ~ 8 | Not Provided | Not Provided | Not Provided | - | - | Not Provided | 2000 |
From: 724,714 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
CP quenching ground rack MRGCPF
KOHARA GEAR INDUSTRY
Carburized KHK peak performance rack. No.1 best performance ever KHK in both strength and precision. Additional work is possible on parts other than teeth as carburized.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 500 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Others | Not Provided | Provided | 50 ~ 100 | - | Provided | 500 |
From: 13,397,193 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Made from thermal refined SCM440, CP rack with induction hardened tooth surface, for 50% stronger tooth surface than thermal refined only rack. Convenient for integer movement with one pinion rotation.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 1000 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Induction Hardened | Black Oxide | Not Provided | 100 ~ 200 | - | Provided | 1000 |
From: 7,192,461 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Thermal refined SCM440 material, gear strength enhanced rack.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 1005.31 | 1.5 ~ 5 | General Steel | Standard | 15 ~ 50 | Thermal Refined | Black Oxide | Not Provided | 32 ~ 212 | - | Provided | 500 ~ 1000 |
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
[Overall Length Configurable]Brass Rack BSR
KOHARA GEAR INDUSTRY
[Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* Please specify desired dimensions in specification / dimensions on the left.* Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 20 ~ 303 | 0.8 ~ 1 | Brass | Standard | 4 ~ 6 | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - |
Days to Ship: Số ngày giao hàng: 13 Day(s) or more |
You can add up to 6 items per a category to the compare list.
[Overall Length/Stay Holes Specifiable]Plastic Rack PR
KOHARA GEAR INDUSTRY
[Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.* Please specify desired dimensions in specification / dimensions on the left.* Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]· MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 20 ~ 505 | 1 | Plastic | Standard | 10 | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - |
Days to Ship: Số ngày giao hàng: 13 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Teeth are laser hardened as standard for twice the tooth surface strength compared to conventional SRF racks, while keeping the price down.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 999 ~ 2050 | 1.5 ~ 6 | - | Standard | 15 ~ 60 | - | Black Oxide | Not Provided | 53 ~ 435 | - | Provided | - |
From: 5,644,417 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Made from thermal refined SCM440, with induction hardened tooth surface, for 50% stronger tooth surface than thermal refined rack. Tough rack for compact designs.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 999.03 ~ 1005.31 | 1.5 ~ 5 | General Steel | Standard | 15 ~ 50 | Induction Hardened | Black Oxide | Not Provided | 64 ~ 212 | - | Provided | 1000 |
From: 7,084,068 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SRCPF series rack tooth surface induction hardening as standard, keeping costs down, and over 2x tooth strength of SRCPF series. Low-priced quenching rack with reliable, long service life, and high strength. J-series available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 1000 ~ 1005 | 1.5915 ~ 6.3662 | General Steel | Standard | 15 ~ 60 | Induction Hardened | Black Oxide | Not Provided | 50 ~ 200 | - | Provided | 1000 |
From: 4,537,140 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Tempered SCM440 material, gear strength enhanced CP tempered rack.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 500 ~ 1000 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Thermal Refined | Black Oxide | Not Provided | 50 ~ 200 | - | Provided | 500 ~ 1000 |
From: 2,234,144 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Ground rack made from thermal refined SCM440, with induction hardened teeth surface, for 50% stronger tooth surface than thermal refined only rack. J-series with mount hole processing also available
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 1005.31 | 1.5 ~ 3 | General Steel | Standard | 15 ~ 30 | Induction Hardened | Not Provided | Provided | 53 ~ 212 | - | Provided | 500 ~ 1000 |
From: 11,365,080 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 505 ~ 1005.31 | 1 ~ 3 | Plastic | Standard | 10 ~ 30 | Not Provided | Not Provided | Not Provided | 52 ~ 212 | - | Not Provided / Provided | 500 ~ 1000 |
From: 1,811,393 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP thermal refined ground rack, made of thermal refined SCM440 material. Price reduced by 20% compared with the previous product, with surface installation made easy by enlarged C side of the mounting surface.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 1000 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Thermal Refined | Not Provided | Provided | 8 ~ 200 | - | Not Provided / Provided | 100 ~ 1000 |
From: 2,710,795 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Machined CP metal flexible rack made of SS400. Continuous length product with total length up to 4000 mm available. Can bend to an arc to some degree to suit base.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Flexible Rack | 2000 ~ 4000 | 1.5915 | General Steel | Standard | 10 | Not Provided | Not Provided | Not Provided | - | - | Not Provided | 2000 ~ 4000 |
From: 5,120,807 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
[Features]Gear strength up with SCM440 thermal refined material.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 1005.31 | 1.5 ~ 5 | General Steel | Standard | 15 ~ 50 | Thermal Refined | Black Oxide | Not Provided | 32 ~ 212 | - | Provided | 500 ~ 1000 |
From: 2,770,598 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
European size SRAF rack added to full lineup of J-series.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 999.03 ~ 1005.31 | 1.5 ~ 4 | General Steel | Standard | 15 ~ 40 | Not Provided | Black Oxide | Not Provided | 80 ~ 212 | - | Provided | 1000 |
From: 2,169,030 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Stainless steel round processed rack with outer diameter tolerance h9. Use for rust-intolerant machinery.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Round Rack | 505 ~ 1010 | 1 ~ 3 | Stainless Steel | Standard | - | Not Provided | Not Provided | Not Provided | 52 ~ 159 | 10 ~ 30 | Not Provided | 500 ~ 1000 |
From: 2,827,253 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CP quenching ground rack KRGCPF
KOHARA GEAR INDUSTRY
CP hardened ground rack made from thermal refined SCM440, with tooth surface induction hardening as standard, keeping costs down, and increasing tooth surface strength by 50% compared to conventional thermal refined type. Excellent strength and wear resistance
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 500 ~ 1000 | 1.5915 ~ 3.1831 | General Steel | Standard | 15 ~ 30 | Induction Hardened | Not Provided | Provided | 50 ~ 200 | - | Provided | 500 ~ 1000 |
From: 11,365,080 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CP Hardened Ground Tooth Rack SRGCP
KOHARA GEAR INDUSTRY
CP ground rack made from S45C, with induction hardened tooth surface, at a reasonable price. CP ground rack with excellent wear resistance, and high precision positioning. J series also available.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 98 ~ 1005 | 1.5915 ~ 6.3662 | General Steel | Standard | 15 ~ 60 | Induction Hardened | Black Oxide | Provided | 3 ~ 200 | - | Not Provided / Provided | 100 ~ 1000 |
From: 1,464,577 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Round Rack | 505 ~ 1010 | 0.7958 ~ 3.1831 | General Steel | Standard | - | Not Provided | Black Oxide | Not Provided | 99 ~ 200 | 10 ~ 30 | Not Provided | 500 ~ 1000 |
From: 1,663,264 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
L type mount bracket dedicated to DR【10 Pieces Per Package】
KOHARA GEAR INDUSTRY
Dedicated L mounting bracket for chromate finish molded flexible rack.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | General Steel | - | 8 | - | - | - | - | - | - | - |
From: 185,758 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Slide rail ARL for dedicated molded flexible rack use. Useful for fixing molded flexible racks and for slide use.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | Aluminum | - | 10.3 ~ 17.3 | - | - | - | - | - | - | - |
From: 303,338 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
[Features]· Plastic rack with less water absorption and smaller dimensional change than MC nylon.
Shape | Length L(mm) | Module (M) / Circular Pitch (P) | Material | Tooth Type | Tooth Width B(mm) | Heat Treatment | Surface Treatment | Ground Tooth | Number of Teeth(teeth) | Rack Dia. D(Ø) | End Finish Machining | Length (nominal) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Rack | 499.51 ~ 1005.31 | 1 ~ 3 | Plastic | Standard | 10 ~ 30 | Not Provided | Not Provided | Not Provided | 53 ~ 212 | - | Not Provided | 500 ~ 1000 |
From: 1,694,935 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
Shape |
Length L(mm) |
Module (M) / Circular Pitch (P) |
Material |
Tooth Type |
Tooth Width B(mm) |
Heat Treatment |
Surface Treatment |
Ground Tooth |
Number of Teeth(teeth) |
Rack Dia. D(Ø) |
End Finish Machining |
Length (nominal) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY |
Product SeriesDòng sản phẩm | |||||||||||||||||||||||||||||||||||||||||||||
CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
From | 1,260,972 VND- | - | 514,876 VND- | 792,189 VND- | 14,068,990 VND- | 17,613,636 VND- | 13,397,193 VND- | 4,537,140 VND- | 2,715,320 VND- | 448,438 VND- | 512,587 VND- | 1,529,691 VND- | 20,575,568 VND- | 3,313,151 VND- | 3,195,512 VND- | 1,513,560 VND- | 6,308,573 VND- | 19,278,991 VND- | 1,426,235 VND- | 272,456 VND- | 2,429,880 VND- | 1,581,035 VND- | 724,714 VND Special Price On Sale Till 31/03/2025 | 13,397,193 VND- | 7,192,461 VND- | 2,180,046 VND- | - | - | 5,644,417 VND- | 7,084,068 VND- | 4,537,140 VND- | 2,234,144 VND- | 11,365,080 VND- | 1,811,393 VND- | 2,710,795 VND- | 5,120,807 VND- | 2,770,598 VND- | 2,169,030 VND- | 2,827,253 VND- | 11,365,080 VND- | 1,464,577 VND- | 1,663,264 VND- | 185,758 VND | 303,338 VND- | 1,694,935 VND- |
Days to ShipSố ngày giao hàng | 4 Day(s) or more | Same day or more | 5 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
Shape | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Tapered Rack | Square Rack | Square Rack | Square Rack | Square Rack | Round Rack | Flexible Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Flexible Rack | Square Rack | Square Rack | Round Rack | Square Rack | Square Rack | Round Rack | - | - | Square Rack |
Length L(mm) | 298.45 ~ 2049.88 | 20 ~ 505 | 95 ~ 1010 | 298.45 ~ 2049.88 | 499.51 ~ 1005.31 | 1000 ~ 2000 | 499.51 ~ 502.65 | 999.03 ~ 1005.31 | 505 ~ 1005.31 | 303 | 59 ~ 66 | 999.03 ~ 1005.31 | 1000 ~ 2000 | 500 ~ 1000 | 98 ~ 1005.31 | 495 ~ 2050 | 1000 | 1000 ~ 2000 | 98 ~ 1005.31 | 98 ~ 2050 | 98 ~ 1005.31 | 505 ~ 1010 | 2000 | 500 | 1000 | 499.51 ~ 1005.31 | 20 ~ 303 | 20 ~ 505 | 999 ~ 2050 | 999.03 ~ 1005.31 | 1000 ~ 1005 | 500 ~ 1000 | 499.51 ~ 1005.31 | 505 ~ 1005.31 | 98 ~ 1000 | 2000 ~ 4000 | 499.51 ~ 1005.31 | 999.03 ~ 1005.31 | 505 ~ 1010 | 500 ~ 1000 | 98 ~ 1005 | 505 ~ 1010 | - | - | 499.51 ~ 1005.31 |
Module (M) / Circular Pitch (P) | 0.5 ~ 6 | 0.5 ~ 10 | 2 ~ 3 | 0.5 ~ 10 | 1 ~ 3 | 2 | 1.5 ~ 3 | 1.5 ~ 6 | 1 ~ 4 | 0.5 ~ 1 | 1.5 ~ 2 | 1.5 ~ 4 | 3 ~ 6 | 1.5915 ~ 3.1831 | 1 ~ 3 | 0.7958 ~ 6.3662 | 1.5915 ~ 3.1831 | 2 | 1 ~ 6 | 0.7958 ~ 6.3662 | 1 ~ 3 | 1 ~ 5 | 0.8 ~ 2 | 1.5915 ~ 3.1831 | 1.5915 ~ 3.1831 | 1.5 ~ 5 | 0.8 ~ 1 | 1 | 1.5 ~ 6 | 1.5 ~ 5 | 1.5915 ~ 6.3662 | 1.5915 ~ 3.1831 | 1.5 ~ 3 | 1 ~ 3 | 1.5915 ~ 3.1831 | 1.5915 | 1.5 ~ 5 | 1.5 ~ 4 | 1 ~ 3 | 1.5915 ~ 3.1831 | 1.5915 ~ 6.3662 | 0.7958 ~ 3.1831 | - | - | 1 ~ 3 |
Material | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | Stainless Steel | Brass | General Steel | General Steel | General Steel | Stainless Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | Plastic | General Steel | General Steel | General Steel | Brass | Plastic | - | General Steel | General Steel | General Steel | General Steel | Plastic | General Steel | General Steel | General Steel | General Steel | Stainless Steel | General Steel | General Steel | General Steel | General Steel | Aluminum | Plastic |
Tooth Type | Standard | Standard | Helical | Standard | Helical | Helical | Standard | Standard | Standard | Standard | Helical | Standard | Helical | Standard | Helical | Standard | Standard | Helical | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard |
Tooth Width B(mm) | 5 ~ 60 | 5 ~ 90 | 25 ~ 35 | 5 ~ 90 | 8 ~ 25 | 24 | 15 ~ 30 | 15 ~ 60 | 10 ~ 40 | 3 ~ 6 | 17 ~ 25 | 15 ~ 40 | 29 ~ 59 | 15 ~ 30 | 8 ~ 25 | 10 ~ 60 | 15 ~ 30 | 24 | 10 ~ 60 | 10 ~ 60 | 10 ~ 30 | - | 3.8 ~ 8 | 15 ~ 30 | 15 ~ 30 | 15 ~ 50 | 4 ~ 6 | 10 | 15 ~ 60 | 15 ~ 50 | 15 ~ 60 | 15 ~ 30 | 15 ~ 30 | 10 ~ 30 | 15 ~ 30 | 10 | 15 ~ 50 | 15 ~ 40 | - | 15 ~ 30 | 15 ~ 60 | - | 8 | 10.3 ~ 17.3 | 10 ~ 30 |
Heat Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Thermal Refined | Induction Hardened | Others | Induction Hardened | Others | Not Provided | Not Provided | Not Provided | Induction Hardened | Others | Thermal Refined | Not Provided | Not Provided | Induction Hardened | Induction Hardened | Not Provided | Thermal Refined | Not Provided | Not Provided | Others | Induction Hardened | Thermal Refined | Not Provided | Not Provided | - | Induction Hardened | Induction Hardened | Thermal Refined | Induction Hardened | Not Provided | Thermal Refined | Not Provided | Thermal Refined | Not Provided | Not Provided | Induction Hardened | Induction Hardened | Not Provided | - | - | Not Provided |
Surface Treatment | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | Not Provided | Black Oxide | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Black Oxide | Not Provided | Not Provided | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | Not Provided | Not Provided | Black Oxide | Black Oxide | - | - | Not Provided |
Ground Tooth | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | - | - | Not Provided |
Number of Teeth(teeth) | 26 ~ 435 | 3 ~ 159 | 7 ~ 153 | 20 ~ 435 | 106 ~ 160 | 150 ~ 300 | 53 ~ 106 | 53 ~ 212 | 39 ~ 212 | 94 ~ 190 | 7 ~ 9 | 80 ~ 212 | 50 ~ 200 | 50 ~ 200 | 19 ~ 160 | 25 ~ 410 | 100 ~ 200 | 150 ~ 300 | 4 ~ 212 | 3 ~ 410 | 9 ~ 318 | 39 ~ 159 | - | 50 ~ 100 | 100 ~ 200 | 32 ~ 212 | - | - | 53 ~ 435 | 64 ~ 212 | 50 ~ 200 | 50 ~ 200 | 53 ~ 212 | 52 ~ 212 | 8 ~ 200 | - | 32 ~ 212 | 80 ~ 212 | 52 ~ 159 | 50 ~ 200 | 3 ~ 200 | 99 ~ 200 | - | - | 53 ~ 212 |
Rack Dia. D(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ~ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ~ 30 | - | - | 10 ~ 30 | - | - | - |
End Finish Machining | Provided | Not Provided | Not Provided / Provided | Provided | Provided | Not Provided | Provided | Provided | Not Provided / Provided | Not Provided | Provided | Provided | Not Provided | Provided | Not Provided / Provided | Provided | Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Provided | Provided | Not Provided | Provided | Not Provided / Provided | Not Provided | - | - | Not Provided |
Length (nominal) | 300 ~ 2000 | 100 ~ 500 | 100 ~ 1000 | 300 ~ 2000 | 500 ~ 1000 | 1000 ~ 2000 | 500 | 1000 | 500 ~ 1000 | 300 | 59 ~ 66 | 1000 | 1000 ~ 2000 | 500 ~ 1000 | 100 ~ 1000 | 500 ~ 2000 | 1000 | 1000 ~ 2000 | 100 ~ 1000 | 100 ~ 2000 | 100 ~ 1000 | 500 ~ 1000 | 2000 | 500 | 1000 | 500 ~ 1000 | - | - | - | 1000 | 1000 | 500 ~ 1000 | 500 ~ 1000 | 500 ~ 1000 | 100 ~ 1000 | 2000 ~ 4000 | 500 ~ 1000 | 1000 | 500 ~ 1000 | 500 ~ 1000 | 100 ~ 1000 | 500 ~ 1000 | - | - | 500 ~ 1000 |
Loading...Tải…
[20-505/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy