(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Quote /Order Báo giá /Đặt hàng
-
MISUMI App QR Code Click for More Details
- inCAD Library Home
- > No.000257 Direction Distinction Mechanism
No.000257 Direction Distinction Mechanism
13
13
Can be adjusted freely and can sense the direction of the workpiece using a visual sensor.
Relevant category
Device Stands
| Product name | Device Stands - Compact Flange, Pipe |
|---|---|
| Part number | MFSBN12-300 |
| Features | Stand Set for Space Saving Mounting. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable pedestal to support the target function independently
Available sizes
■Device Stands - Compact Flange, Pipe
| Post | Bracket | ||
|---|---|---|---|
| Material | Surface Treatment | Material | Surface Treatment |
| 1045 Carbon Steel | Electroless Nickel Plating | 1045 Carbon Steel | Low Temp. Black Chrome Plating |
| 1045 Carbon Steel | |||
| Black Oxide | |||
| 304 Stainless Steel | - | ||
| 1045 Carbon Steel | Electroless Nickel Plating | 1045 Carbon Steel | Low Temp. Black Chrome Plating |
| 1045 Carbon Steel | |||
| 304 Stainless Steel | - | ||
| 1045 Carbon Steel | Black Oxide | 1045 Carbon Steel | Black Oxide |
| 304 Stainless Steel | - | 304 Stainless Steel | - |
■Sizes and Dimensions
| Post Dia. (mm) | Post length (Configure in 1mm increments) | Flange External Dimensions (mm) | Installation Hole Dia. (mm) |
|---|---|---|---|
| 6 | 50-150 | 38x20 | 4.5 |
| 8 | 50-200 | 38x20 | |
| 10 | 50-250 | 40x22 | |
| 12 | 50-300 | 46x24 | 5.5 |
| 15 | 75-350 | 56x29 | 6.6 |
| 20 | 75-400 | 63x34 | 6.6 |
| 25 | 75-450 | 78x41 | 9 |
| 30 | 100-450 | 82x46 |
Accuracy Info
■Accuracy of Device stand
| Post Dia. (mm) | Tolerance (g6) |
|---|---|
| 6 | -0.004 -0.012 |
| 8 | -0.005 -0.014 |
| 10 | |
| 12 | -0.006 -0.017 |
| 15 | |
| 20 | -0.007 -0.020 |
| 25 | |
| 30 |
Strut Clamps
| Product name | Strut Clamps - Perpendicualr Configuration, Same Diameter, Selectable Pitch |
|---|---|
| Part number | MMKC12-15 |
| Features | Selectable shaft pitch between two posts for stands. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Popular post fastening parts with position adjustment capabilities
Risk info.
Minor adjustment takes man-hour
Available sizes
■Strut Clamps - Perpendicualr Configuration, Same Diameter, Selectable Pitch
| Material | Surface Treatment | Accessory |
|---|---|---|
| 1018 Carbon Steel | Black Oxide | Hex Socket Head Cap Screw |
| Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| 6063 Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw |
| 304 Stainless Steel | - | Hex Socket Head Cap Screw (Stainless Steel) |
■Sizes and Dimensions
| Hole Dia. | Hole Pitch | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | 150 | |
| 6 | ○ | ○ | ○ | - | - | - | - | - | - | - |
| 8 | ○ | ○ | ○ | ○ | - | - | - | - | - | - |
| 10 | - | ○ | ○ | ○ | ○ | - | - | - | - | - |
| 12 | ||||||||||
| 15 | - | - | ○ | ○ | ○ | ○ | - | - | - | - |
| 20 | - | - | - | ○ | ○ | ○ | ○ | - | - | - |
| 25 | - | - | - | - | ○ | ○ | ○ | ○ | - | - |
| 30 | - | - | - | - | - | - | ○ | ○ | ○ | ○ |
| 35 | ||||||||||
Accuracy Info
■Accuracy of Strut Clamp
| Hole Dia. | Hole Dia. Tolerance (H7) |
|---|---|
| 6 | +0.012 0 |
| 8 | +0.015 0 |
| 10 | |
| 12 | +0.018 0 |
| 15 | |
| 20 | +0.021 0 |
| 25 | |
| 30 | |
| 35 | +0.025 0 |
Hole Perpendicularity: 0.05
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Can be adjusted freely in XYZ directions.
- Distinguish the orientation of workpiece with visual sensor.
- Also capable of image processing.
Points for use
- A manual adjustment mechanism that slides and rotates the shaft.
Target workpiece
- Plastic box
- External dimension: W60×D20×H50
- Workpiece weight: 100g
Design Specifications
Operating Conditions or Design Requirements
- External dimension: W135xD209xH374
- Workpiece distance: Approx. 135mm
- Sensor angle against workpiece: 20°
Selection Criteria for Main Components
- Shaft
- Select the shaft diameter that allows the system to be totally balanced.
Design Evaluation
Other Design Consideration
- The viewing angle against the workpiece can be adjusted freely by using strut clamps and the shaft.
Explore Similar Application Examples
Page
1
/
10
