Linear Guides for Heavy Load - Normal Clearance

MISUMI

CAD ：

2D / 3D

Linear Guides for for Heavy Load - Normal Clearance

MISUMI

Linear Guides for Heavy Load - Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 100 and 1960 ● Assembly Height (mm.): 24, 28, 33, and 42 ● Block Type : Standard Block and Wide Block Tapped Hole ● Material: Carbon Steel 56HRC-62HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Medium Load - Normal Clearance

MISUMI

CAD ：

2D / 3D

[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type

THK

An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

CAD ：

2D / 3D

[Retainer Equivalent] Quiet Linear Guideway QE Series

HIWIN

High-speed, low-noise and clean linear guide. [Features] · Uses SynchMotion technology. · The device stores lubricant and uses patented SynchMotion technology to ensure reduced noise when the rolling elements are moving while also providing an improved lubricating effect. · High-speed, low-noise design makes it suitable for use in a wide variety of fields.

CAD ：

2D / 3D

Linear Guides for Medium/Heavy Load - Stainless Steel - Normal Clearance

MISUMI

Linear Guides for Medium/Heavy Load - Stainless Steel - Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 100 and 700 ● Assembly Height (mm.): 24, 28, and 33 ● Block Type : Standard Block or Wide Block ● Material: Stainless Steel 56HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type

THK

An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

CAD ：

2D / 3D

[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type

THK

An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

CAD ：

2D / 3D

Linear Rail System SBI-FL/FLL Series

SBC

[Features]· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."Please place your orders in this manner.

CAD ：

2D / 3D

Linear Guides for for Medium Load - Normal Clearance

MISUMI

Linear Guides for Medium Load - Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 100 and 1960 ● Assembly Height (mm.): 24, 28, 33, and 42 ● Block Type : Standard Block and Wide Block Tapped Hole ● Material: Carbon Steel 56HRC-62HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type

THK

Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture[Features]· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.[Applications]· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

CAD ：

2D / 3D

Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance

MISUMI

Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance These linear guides or linear slide are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 100 and 1960 ● Assembly Height (mm.): 24, 28, and 33 ● Block Type : Block with Dowel holes ● Material: Carbon Steel 58HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Super Heavy Load - Normal Clearance

MISUMI

Linear Guides for Super Heavy Load - Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 100 and 1960 ● Assembly Height (mm.): 24, 28, 30, 36, 40, 42 and 45 ● Block Type : Standard Block and Wide Block Tapped Hole ● Material: Carbon Steel 56HRC-62HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance

MISUMI

Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 160 and 1960 ● Assembly Height (mm.): 24, 28, and 33 ● Block Type : Standard Block or Wide Block ● Material: Carbon Steel 58HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Caged Ball LM Guide, Radial Type, SSR Type

THK

Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.

CAD ：

2D / 3D

[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type

THK

An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.·· Cross-section

CAD ：

2D / 3D

Full-Ball Type LM Guide, International Standard, HSR Type

THK

A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.

CAD ：

2D / 3D

[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type

THK

A best selling THK product. The SHS series can be used in any position.*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.

CAD ：

2D / 3D

Linear Rail System SBI-SL/SLL Series

SBC

[Features]· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."Please place your orders in this manner.

CAD ：

2D / 3D

[Retainer Equivalent] Quiet Linear Guideway QH Series

HIWIN

Structured with a 4-row circular-arc contact for less noise when the rolling elements are moving. This structure ensures, among other things, smooth movement, a longer service life and improved lubrication. High-speed, low-noise and clean linear guide. [Features] · A low-noise design with SynchMotion technology that eliminates collision noises caused by the rolling elements colliding into each other. · Lubricant can be refilled into the raceway while the balls are moving. Lubricant can be stored within the retainer so that you do not have to keep refilling. Ensures an even lubrication effect for a longer service life. · SynchMotion technology maintains constant movement and reduces frictional resistance. This also helps improve the smoothness of motion. · A smaller contact surface area drastically reduces frictional resistance. The QH type offers superior high-speed properties.

CAD ：

2D / 3D

Linear Guides with Low Temperature Black Chrome Plating

MISUMI

Linear Guides with Low Temperature Black Chrome Plating These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 35 and 1000 ● Assembly Height Minimum/ Maximum (mm.): 8 and 33 ● Block Type : Standard Block with or without Dowel Holes, Long Block, Wide Block Cross-Through Holes and Wide Block Tapped Hole ● Rail Type : Standard Rail or Wide Rail ● Material: Stainless Steel and Carbon Steel [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Caged Ball LM Guide, International Standard, SHS Type

THK

A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.

CAD ：

2D / 3D

Linear Rail System SBI-CL/CLL Series

SBC

[Features]· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."Please place your orders in this manner.

CAD ：

2D / 3D

Linear Guides for Extra Super Heavy Load - Normal Clearance

MISUMI

Linear Guides for Extra Super Heavy Load - Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 160 and 1960 ● Assembly Height (mm.): 30, 36, 40, 42 and 45 ● Block Type : Standard Block and Wide Block Tapped Hole ● Material: Carbon Steel 56HRC-62HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Ball LM guide, radial type, SR-M1 type

THK

High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

CAD ：

2D

Full-Ball Type LM Guide, Radial Type, SR Model

THK

A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.· LM block, LM rail, and LM rail are all compatible with stainless steel.

CAD ：

2D / 3D

Linear Guide MSA Series

PMIGUIDE

[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type

THK

[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW TypeThese slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from. [Feature] ● Block Type : Wide Block● Applicable for Rail Type : Wide Rail● Accuracy Grade : Standard Grade ● Number of Block Mounting Holes : 4 or 6 ● Mounting Hole Dimension : M4, M5, M6 and M8 ● Material: Carbon Steel [Application] It is used in a THK LM Guide SHW Series.

CAD ：

2D / 3D

Linear Guide MSB Series

PMIGUIDE

Linear Rail System SBI-HL/HLL Series

SBC

[Features]· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."Please place your orders in this manner.

CAD ：

2D / 3D

Full-Ball Type LM Guide for High Temperatures Model HSR-M1

THK

High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

CAD ：

2D

Full-Ball Type LM Guide Wide Rail HRW Type

THK

A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

CAD ：

2D / 3D

Linear Guides for Medium Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance

MISUMI

Linear Guides for Medium Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.[Feature] ● Rail Length Minimum/Maximum (mm.): 160 and 1960 ● Assembly Height (mm.): 24, 28, and 33 ● Block Type : Standard and Wide Block ● Material: Carbon Steel 58HRC [Application] It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D