(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 28/7/2024 to 6:00 (ICT) 29/7/2024. We apologize for the inconvenience.
- Thông báo ngừng cung cấp các sản phẩm khí nén của dòng Economy. Xem chi tiết.
Notice of Discontinuation of Pneumatics categories in Economy Series. See more.
THK Standard Linear Guides（Ball Arrangement：4-Row, Circular）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
17 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type
THK
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 N/A 26 ～ 82 26 ～ 72 4 ～ 10 60 ～ 80 4.5 ～ 9 From: 1,630,768 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more 
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 N/A 26 ～ 82 26 ～ 50 4 ～ 9 60 ～ 80 3.5 ～ 9 From: 2,333,151 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type
THK
An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 Available 26 ～ 60 26 ～ 50 4 ～ 8 60 ～ 80 4.5 ～ 9 From: 2,173,798 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/HSR.jpg?$product_view_b$)
[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
THK
Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture[Features]· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.[Applications]· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 73 ～ 2920 Standard / Wide 15 ～ 34 28 ～ 55 15 ～ 35 Standard Set Standard Standard Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 N/A 26 ～ 82 26 ～ 72 4 ～ 10 60 ～ 80 4.5 ～ 9 Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide, Radial Type, SSR Type
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 47 ～ 3000 Standard 15 ～ 20 24 ～ 28 15 ～ 20 Standard Set Standard / Light Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 26 ～ 32 26 4 ～ 5 60 4.5 ～ 6 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type
THK
An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance. [Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.·· Cross-section
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 Available 26 ～ 72 26 ～ 72 4 ～ 8.5 60 ～ 80 4.5 ～ 9 From: 1,457,821 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide, International Standard, HSR Type
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 25 ～ 3000 Standard / Wide 8 ～ 63 11 ～ 90 8 ～ 65 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 10 ～ 142 10 ～ 120 2 ～ 16 20 ～ 150 2.4 ～ 18 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type
THK
A best selling THK product. The SHS series can be used in any position.*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 73 ～ 2920 Standard / Wide 15 ～ 34 24 ～ 55 15 ～ 35 Standard Set NLC / Standard NLE / Standard Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 Available 26 ～ 72 26 ～ 72 4 ～ 8.5 60 ～ 80 4.5 ～ 9 Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide, International Standard, SHS Type
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."Please place your orders in this manner.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 71 ～ 3000 Standard / Wide 15 ～ 28 24 ～ 42 15 ～ 30 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 26 ～ 72 26 ～ 60 4 ～ 8.5 60 ～ 80 4.5 ～ 9 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball LM guide, radial type, SR-M1 type
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
- CAD ：
- 2D
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 47 ～ 1500 Standard / Wide / Wide Short 15 ～ 34 24 ～ 48 15 ～ 35 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Stainless Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 26 ～ 82 26 ～ 50 4 ～ 9 60 ～ 80 3.5 ～ 9 Days to Ship: Số ngày giao hàng: 38 Day(s) or more
38 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide, Radial Type, SR Model
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.· LM block, LM rail, and LM rail are all compatible with stainless steel.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 47 ～ 3000 Standard / Wide Short 15 ～ 23 24 ～ 33 15 ～ 25 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 26 ～ 60 - 4 ～ 7 60 3.5 ～ 7 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
THK
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW TypeThese slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from. [Feature] ● Block Type : Wide Block● Applicable for Rail Type : Wide Rail● Accuracy Grade : Standard Grade ● Number of Block Mounting Holes : 4 or 6 ● Mounting Hole Dimension : M4, M5, M6 and M8 ● Material: Carbon Steel [Application] It is used in a THK LM Guide SHW Series.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Wide - - 21 ～ 35 Wide Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 Available 31 ～ 107 19 ～ 60 4.4 ～ 8 50 ～ 80 4.5 ～ 7 From: 4,731,996 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide for High Temperatures Model HSR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.
- CAD ：
- 2D
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 67 ～ 1500 Standard / Wide 15 ～ 20 24 ～ 30 15 ～ 20 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Stainless Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 26 ～ 53 26 ～ 40 4 ～ 6 60 4.5 Days to Ship: Số ngày giao hàng: 53 Day(s) or more
53 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide Wide Rail HRW Type
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.[Features]· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 72 ～ 3000 Wide 37 ～ 42 21 ～ 27 21 ～ 27 Wide Set Standard / Light Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 46 ～ 60 29 ～ 32 4.4 ～ 6 50 ～ 60 4.5 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
LM guide with Ball retainer - Limited stroke EPF type
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 33 ～ 110 Standard 7 ～ 15 8 ～ 16 7 ～ 15 Standard Set - Standard Grade / High Grade / Precision Grade Stainless Steel 4-Row, Circular 1 Available 12 ～ 25 13 ～ 25 2 ～ 3 15 ～ 40 2.4 ～ 3.5 Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide Low Floor Wide Rail SHW Type
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.[Features]· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 108 ～ 3000 Wide 69 35 35 Wide Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 107 60 8 80 7 Days to Ship: Số ngày giao hàng: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](//vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
THK
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from. [Feature] ● Block Type : Wide Block ● Applicable for Rail Type : Wide Rail ● Accuracy Grade : Standard Grade ● Number of Block Mounting Holes : 4 or 6 ● Mounting Hole Dimension : M5, M6 and M8 ● Material: Carbon Steel and Stainless Steel[Application] It is used in a THK LM Guide HRW Series.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Wide - - 17 ～ 35 Wide Block Only Standard Standard Grade Carbon Steel / Stainless Steel 4-Row, Circular 1 N/A 31 ～ 107 19 ～ 60 3.3 ～ 8 40 ～ 80 4.5 ～ 7 From: 4,240,379 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_b$)
![[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/HSR.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Rail Length L(mm) |
| Block Type |
| Rail Width(mm) |
| Mounting Height H(mm) |
| Nominal Part Number |
| Rail Type |
| Set / Single Item |
| Preload |
| Accuracy |
| Material |
| Ball Arrangement |
| No. of Blocks |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/HSR.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://vn.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_c$) | |
| BrandNhãn hiệu | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product SeriesDòng sản phẩm | [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type | [Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type | [Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type | [Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type | [Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type | [Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type | [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type | [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model | |||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | 1,630,768 VND- | 2,333,151 VND- | 2,173,798 VND- | - | - | 1,457,821 VND- | - | - | - | - | - | 4,731,996 VND- | - | - | - | - | 4,240,379 VND- |
| Days to ShipSố ngày giao hàng | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 38 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 53 Day(s) or more | 13 Day(s) or more | 23 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more |
| Rail Length L(mm) | - | - | - | 73 ～ 2920 | 47 ～ 3000 | - | 25 ～ 3000 | 73 ～ 2920 | 71 ～ 3000 | 47 ～ 1500 | 47 ～ 3000 | - | 67 ～ 1500 | 72 ～ 3000 | 33 ～ 110 | 108 ～ 3000 | - |
| Block Type | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Standard | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide / Wide Short | Standard / Wide Short | Wide | Standard / Wide | Wide | Standard | Wide | Wide |
| Rail Width(mm) | - | - | - | 15 ～ 34 | 15 ～ 20 | - | 8 ～ 63 | 15 ～ 34 | 15 ～ 28 | 15 ～ 34 | 15 ～ 23 | - | 15 ～ 20 | 37 ～ 42 | 7 ～ 15 | 69 | - |
| Mounting Height H(mm) | - | - | - | 28 ～ 55 | 24 ～ 28 | - | 11 ～ 90 | 24 ～ 55 | 24 ～ 42 | 24 ～ 48 | 24 ～ 33 | - | 24 ～ 30 | 21 ～ 27 | 8 ～ 16 | 35 | - |
| Nominal Part Number | 15 ～ 35 | 15 ～ 35 | 15 ～ 35 | 15 ～ 35 | 15 ～ 20 | 15 ～ 35 | 8 ～ 65 | 15 ～ 35 | 15 ～ 30 | 15 ～ 35 | 15 ～ 25 | 21 ～ 35 | 15 ～ 20 | 21 ～ 27 | 7 ～ 15 | 35 | 17 ～ 35 |
| Rail Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Wide | Standard | Wide | Standard | Wide | Wide |
| Set / Single Item | Block Only | Block Only | Block Only | Set | Set | Block Only | Set | Set | Set | Set | Set | Block Only | Set | Set | Set | Set | Block Only |
| Preload | Standard | Standard | Standard | Standard | Standard / Light Preload | Standard | Standard / Light Preload / Medium Preload | NLC / Standard | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard | Standard / Light Preload / Medium Preload | Standard / Light Preload | - | Standard / Light Preload / Medium Preload | Standard |
| Accuracy | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | NLE / Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel |
| Ball Arrangement | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular |
| No. of Blocks | 1 | 1 | 1 | 1 / 2 / 3 / 4 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 |
| Retainer | N/A | N/A | Available | N/A | Available | Available | N/A | Available | Available | N/A | N/A | Available | N/A | N/A | Available | Available | N/A |
| Block Mounting Hole Pitch (Width Direction)(mm) | 26 ～ 82 | 26 ～ 82 | 26 ～ 60 | 26 ～ 82 | 26 ～ 32 | 26 ～ 72 | 10 ～ 142 | 26 ～ 72 | 26 ～ 72 | 26 ～ 82 | 26 ～ 60 | 31 ～ 107 | 26 ～ 53 | 46 ～ 60 | 12 ～ 25 | 107 | 31 ～ 107 |
| Block Mounting Hole Pitch (Length Direction)(mm) | 26 ～ 72 | 26 ～ 50 | 26 ～ 50 | 26 ～ 72 | 26 | 26 ～ 72 | 10 ～ 120 | 26 ～ 72 | 26 ～ 60 | 26 ～ 50 | - | 19 ～ 60 | 26 ～ 40 | 29 ～ 32 | 13 ～ 25 | 60 | 19 ～ 60 |
| Block Mounting Hole Diameter | 4 ～ 10 | 4 ～ 9 | 4 ～ 8 | 4 ～ 10 | 4 ～ 5 | 4 ～ 8.5 | 2 ～ 16 | 4 ～ 8.5 | 4 ～ 8.5 | 4 ～ 9 | 4 ～ 7 | 4.4 ～ 8 | 4 ～ 6 | 4.4 ～ 6 | 2 ～ 3 | 8 | 3.3 ～ 8 |
| Rail Mounting Hole Pitch(mm) | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 60 | 60 ～ 80 | 20 ～ 150 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 60 | 50 ～ 80 | 60 | 50 ～ 60 | 15 ～ 40 | 80 | 40 ～ 80 |
| Rail Mounting Hole Diameter | 4.5 ～ 9 | 3.5 ～ 9 | 4.5 ～ 9 | 4.5 ～ 9 | 4.5 ～ 6 | 4.5 ～ 9 | 2.4 ～ 18 | 4.5 ～ 9 | 4.5 ～ 9 | 3.5 ～ 9 | 3.5 ～ 7 | 4.5 ～ 7 | 4.5 | 4.5 | 2.4 ～ 3.5 | 7 | 4.5 ～ 7 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Rail Length L(mm)
- 25
- 35
- 39
- 40
- 45
- 50
- 55
- 70
- 75
- 76
- 80
- 85
- 90
- 95
- 100
- 110
- 115
- 120
- 130
- 131
- 135
- 140
- 145
- 146
- 150
- 155
- 160
- 161
- 170
- 175
- 176
- 190
- 191
- 195
- 200
- 205
- 206
- 215
- 220
- 221
- 230
- 235
- 236
- 245
- 250
- 251
- 255
- 260
- 265
- 270
- 275
- 276
- 280
- 281
- 290
- 295
- 296
- 310
- 315
- 316
- 320
- 335
- 336
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 380
- 390
- 395
- 400
- 410
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 471
- 475
- 495
- 496
- 500
- 510
- 515
- 520
- 521
- 530
- 535
- 545
- 546
- 550
- 555
- 560
- 570
- 571
- 575
- 580
- 590
- 595
- 596
- 600
- 615
- 620
- 621
- 630
- 635
- 640
- 645
- 646
- 670
- 671
- 680
- 695
- 696
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 9400
[25-3000/1mm Unit(s)]
-
Block Type
-
Standard -
Short -
Wide -
Wide Long -
Long -
Extra Long -
Wide Short
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard -
Wide
-
-
Set / Single Item
- Set
- Block Only
- Rail Only
-
Preload
- Standard
- Light Preload
- Medium Preload
- Clearance
- Heavy Preload
- NLC
See the accuracy standard of each manufacturer.
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Ultra Precision Grade
- NLE
See the accuracy standard of each manufacturer.
-
Material
- Carbon Steel
- Stainless Steel
In the case of Set, the block and rail use the same materials.
-
Ball Arrangement
-
No. of Blocks
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
Related Categories to Standard Linear GuidesDanh mục liên quan đến Standard Linear Guides
FAQ linear guide
- Question: What are standard linear guides?
- Answer: Standard linear guides come in different configurations, such as:
1. Profiled Rail Guides: These linear guides have a rectangular-shaped rail with a corresponding carriage. They provide high load capacity and stiffness, making them suitable for applications that require precision and rigidity.
2. Round Rail Guides: These linear guides feature a round rail and a carriage with circular-shaped rolling elements. They offer smooth and quiet motion and are commonly used in applications with lower load capacities.
3. Compact Linear Guides: These linear guides are designed to have a smaller footprint and are suitable for applications with limited space. They often feature ball bearing-based systems and are used in various industries, including automation and robotics - Question: How do standard linear guides work?
- Answer: Standard linear guides, also known as linear motion systems are mechanical devices used to provide smooth and precise linear motion in various applications. Here's a short explanation of how they work
1. Rail and Slide block: A standard linear guide consists of two main components: a rail and a slide block. The rail is a long, straight and rigid structure that serves as a guide for the linear motion. The slide block is a movable component that rides along the rail.
2. Rolling Elements: Inside the slide block, there are ball rolling. These elements reduce friction, enable smooth motion along the rail and distribute the load evenly across the rail,
3. Lubrication: Some linear guides require lubrication to further reduce friction and ensure smooth operation. Lubricants can be applied to the bearing surfaces or be pre-lubricated within the slide block.
4. Mounting: Linear guides are usually mounted to a stationary base or structure, and the slide block is connected to the moving part or load that needs linear motion. - Question: What industries use standard linear guides?
- Answer: Standard linear guides, which provide precise linear motion control, are utilized in several industries such as
1. Manufacturing and Automation: These kinds of industries widely employ standard linear guides for accurate linear motion control in machine tools, assembly lines, conveyors, and robotic systems
2. Electronics and Semiconductor Industries: The semiconductor and electronics industries rely on linear guides for precise linear motion in equipment such as wafer handling systems, semiconductor manufacturing machines, electronic assembly lines, and so on
3. Medical Industries: Linear guides are used in medical and laboratory equipment for precise linear motion control in kinds of these machines such as surgical robots, measurement tools, and laboratory automation.
4. Printing industry: The printing industry utilizes linear guides to facilitate precise linear motion control in printing machinery systems such as paper handling systems, and paper converting equipment, ensuring high-quality printing and accurate paper handling. - Question: What are the benefits of using standard linear guides?
- Answer: By using standard linear guides offers several benefits in applications requiring precise linear motion control.
1. Precise Linear Motion Control
2. Smooth and Low-Friction Operation
3. High Load-Carrying Capacity
4. Repeatability and Positioning Accuracy
5. Enhanced System Stability
6. Durability and Longevity
7. Versatile and Customizable
8. Wide Range of Applications By utilizing standard linear guides, users can achieve precise, smooth, and reliable linear motion control in their designs, enhancing system performance, accuracy, and overall productivity in numerous applications. - Question: How to select the right standard linear guide for a specific application?
- Answer: Selecting the right standard linear guide for a specific application involves considering various factors. Here's a short step by step for selecting the linear guide
1. Load Capacity: Determine the maximum load the linear guide needs to support in the application. Consider both static and dynamic loads to ensure the guide can handle the required weight.
2. Travel Distance: Evaluate the required travel distance or stroke length of the linear motion and range of motion without exceeding its limits.
3. Precision Requirements: Assess the level of precision needed for the application. Consider factors such as positioning accuracy, repeatability, and smoothness of motion.
4. Speed and Acceleration: Determine the desired speed and acceleration of the linear motion.
5. Environmental Factors: Consider factors such as temperature, humidity, dust, and exposure to chemicals.
6. Mounting and Integration: Consider the mounting options and requirements for integrating the linear guide into the application.
7. Maintenance and Lubrication: Consider factors such as ease of maintenance, lubrication intervals, and access to lubrication points.
8. Budget and Cost Considerations: Evaluate the budget available for the linear guide
9. Consult Manufacturer's Recommendations: Review the manufacturer's specifications, guidelines, and recommendations for the specific linear guide models.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy