(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Inexpensive post-assembly insertion nut that can be used without a stopper. Nuts coated with anti-loosening agents, nuts with conductive functions, etc., are available.
Nuts Sold individually | Nuts Sold in packs | |
HNTF6 (equivalent to S10C) HNTFV6 (anti-loosening adhesive Nuts type, equivalent to S10C) HNTFZ6 (anti-loosening resin coating Nuts type, equivalent to S10C) HNTFSN6 (equivalent to SUS316, sintered) | PACK-HNTF6 (Pack of 100) PACK-HNTFV6 (Pack of 100) PACK-HNTFZ6 (Pack of 100) PACK-HNTFSN6 (Pack of 100) |
Reference tightening torque for Nuts (N・m) | |||
M | Equivalent to S10C/Equivalent to SUS316 (sintered) | ||
6 | 11.7 | ||
No | Nuts Type | [M] Nuts Material | [S] Nuts Surface Treatment |
① | HNTF6 | Equivalent to S10C | Trivalent Chromate |
PACK-HNTF6 | |||
② | HNTFV6 | ||
PACK-HNTFV6 | |||
③ | HNTFZ6 | ||
PACK-HNTFZ6 | |||
④ | HNTFSN6* | SUS316 equivalent (sintered) | − |
PACK-HNTFSN6* |
Nuts Model | − | M |
HNTF6 | − | 6 |
PACK-HNTF6 | − | 6 |
Nuts Model | M | E | T | |||
HNTF6 (equivalent to S10C) | 3 | 4 | 5 | 6 | 5.5 | 6.3 |
HNTFV6 (loosening prevention for Nuts, equivalent to S10C) | 6 | |||||
HNTFZ6 (loosening prevention for Nuts, equivalent to S10C) | ||||||
HNTFSN6 (equivalent to SUS316, sintered) | 3 | 4 | 5 | 6 | 6.4 | 7.4 |
Nuts Model | M (medium) | |||
PACK-HNTF6 | 3 | 4 | 5 | 6 |
PACK-HNTFV6 | 6 | |||
PACK-HNTFZ6 | 6 | |||
PACK-HNTFSN6 | 3 | 4 | 5 | 6 |
■ Anti-loosening Nuts type
■Effects of anti-loosening Nuts agents (reference values)
Features of Nuts | Release torque after tightening (1st time) | Supplementary information | |||
---|---|---|---|---|---|
No anti-fouling agent applied | - | 5.2N・m | - | ||
Anti-loosening for Nuts adhesive Nuts type | ・Effectively prevents loosening ・However, once loosened, the effect is lost ・After tightening, the adhesive needs time to harden (approximately 72 hours at room temperature 25℃) | 7.6N・m | Test conditions: Tightened to 6.8 Nm, dried at room temperature (25°C) for 72 hours, then loosened the Nuts. Measured with HNTTV5-5 | ||
Anti-loosening for Nuts resin coated Nuts type | - The anti-loosening effect can be used repeatedly (the anti-loosening effect will decrease with repeated use) - The anti-loosening effect is immediate after fastening | 6.5N・m | ・The loosening prevention effect decreases with repeated use. ・5th return torque: 6.2N・m (measured with HNTTZ5-5) |
* The torque value is a reference value. The value may vary depending on the clearance between the bolt and Nuts.
■ What is conductive function?
Reference tightening torque for Nuts (N・m) | |||
---|---|---|---|
M | Equivalent to S10C/Equivalent to SUS316 (sintered) | ||
6 | 11.7 |
Groove Width | Frame angle | Depth h | Compatible Nuts | Thickness b (mm) of the panel/bracket to be attached to the frame | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.8 | 1 | 1.2 | 1.5 | 2 | 3 | 4 | 4.5 | 5 | 6 | 8.2 | 9 | 10 | 12 | 14 | ||||
8 | 30 | 9 | 6-3 | M3-8 | M3-10 | M3-12 | M3-15 | M3-18 | M3-20 | |||||||||
6-4 | M4-8 | M4-10 | M4-12 | M4-15 | M4-18 | M4-20 | ||||||||||||
6-5 | M5-8 | M5-10 | M5-12 | M5-15 | M5-18 | M5-20 | M5-22 | |||||||||||
6-6 | - | M6-10 | M6-12 | M6-15 | M6-20 | M6-22 |
This product is a post-insertion nut. It can be installed from the groove after assembly.
■ Compatible series
This Nuts product is compatible with Misumi 6 series (slot width 8 mm) aluminum frames.
6 Series
■ Difference between first-in and last-in
・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.
Post-insertion: The Nuts Can be installed through the groove after assembly.
■ If the aluminum frame becomes stuck and cannot be removed
To remove the Nuts, hook the hex wrench into the hole in the nut and turn it at right angles to the groove.
■ Measures to prevent Nuts from falling
Product name of Nuts | Aluminum frame | bracket | Blind Joint | Frame cap | Groove cover |
---|---|---|---|---|---|
Product pictures | |||||
Product Nuts page | Here | Here | Here | Here | Here |
Part Number |
---|
HNTF6-3 |
HNTF6-4 |
HNTF6-5 |
HNTF6-6 |
HNTFV6-6 |
HNTFZ6-6 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Nominal of Thread M (mm) | Material | Lock | Material | Surface Treatment | Sale Type |
---|---|---|---|---|---|---|---|---|---|---|---|
15,430 VND | 1 Piece(s) | Available | Same day | 10 | M3 | Steel | Not Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts | |
15,430 VND | 1 Piece(s) | Available | Same day | 10 | M4 | Steel | Not Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts | |
15,430 VND | 1 Piece(s) | Available | Same day | 10 | M5 | Steel | Not Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts | |
15,430 VND | 1 Piece(s) | Available | Same day | 10 | M6 | Steel | Not Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts | |
19,809 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | M6 | Steel | Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts, Thread Locking Adhesive | |
21,478 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | M6 | Steel | Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts, Thread Locking Plastic Coating |
Loading...Tải…
Nut Type | Post-Assembly Insertion Nuts | Series | MISUMI 6 Series | Function | Short Nuts |
---|---|---|---|---|---|
Type | HFS |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy