• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Standard

  MISUMI

  This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Tapped

  MISUMI

  This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Tapped

  MISUMI

  ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped Tapped

  MISUMI

  ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSP Series)

  WONST

  [Features] · The nut on the spline is machined with a keyway, allowing the rotational direction position to be secured properly.

  • Volume Discount

  From: 4,884,585 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped and Threaded, One End Tapped

  MISUMI

  A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Torque Flange Type Ball Spline Model LBF (Medium Load Type)

  THK

  Utilizes a flange to fixate the housing using a bolt, which makes assembly easy. Ideal for housings with small widths or where there are concerns of deformation associated with machining key grooves into the housing.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 85 Day(s) or more

  85 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPT Series)

  WONST

  [Applications] · Ball spline with the retainer part incorporated internally, providing both rigidity and a streamlined appearance

  From: 5,500,945 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped

  MISUMI

  ball spline with stepped edges on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped and Threaded

  MISUMI

  A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped

  MISUMI

  A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPL Series)

  WONST

  [Applications] · A general nut type ball spline with keyway with which the rotational direction position can be fixed · Type with a longer overall nut length than the WSP Series and a larger rated load.

  CAD ：

  2D

  From: 5,500,945 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Hexagonal Spline, Single Nut (HTK) / Double Nut (HTKW) Series

  OZAK

  Miniature size (hexagonal axes 3, 4, 5) is standardized.[Features]・ It achieves downsizing and weight reduction of machinery・ The combination of resin nut (PPS resin) and stainless steel shaft (SUS304) has excellent corrosion resistance and can be used in a wide range of environments・ Non-backlash specifications (W Series) are also available as standard products

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPTF Series)

  WONST

  [Applications] · The retainer part is inserted within the nut, providing both rigidity and a streamlined appearance. · Round-flanged type that is easy to install.

  • Volume Discount

  From: 6,104,561 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Compex- Ball Spline Cylindrical WSPTO

  WONST

  [Applications] · Ball spline with the retainer part incorporated internally, providing both rigidity and a streamlined appearance · Type with a shaft with a larger outer diameter than that of the WSPT series

  From: 5,903,448 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPFL Series)

  WONST

  [Applications] · Easy-to-install ball spline with a round flange · Type with a longer overall nut length than the WSPTF Series and a larger rated load.

  From: 6,104,700 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPK Series)

  WONST

  [Applications]·This is a ball spline with a square flange for easy mounting.

  From: 6,440,110 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped and Threaded

  MISUMI

  ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COMPACT BALL SPLINE (WSPKL Series)

  WONST

  [Applications] · Easy-to-install ball spline with a square flange · Type with a longer overall nut length than the WSPK Series and a larger rated load.

  • Volume Discount

  From: 7,235,009 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Nut Type
Spline Shaft Outer Dia. D(Ø)
Type
Nut Length
Nut Overall Length L1(mm)
Nut Outer Dia. D1(Ø)
Preload
Accuracy Grade
End Shape (Left)
End Shape (Right)
Torque
Shaft material
Number of Nuts(pc(s).)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	WONST	MISUMI	THK	WONST	MISUMI	MISUMI	MISUMI	WONST	OZAK	WONST	WONST	WONST	WONST	MISUMI	WONST
Product SeriesDòng sản phẩm	Ball Splines - Standard	Ball Splines - Both Ends Tapped	Ball Splines - One End Tapped	Ball Splines - Both Ends Stepped Tapped	COMPACT BALL SPLINE (WSP Series)	Ball Splines - One End Stepped and Threaded, One End Tapped	High Torque Flange Type Ball Spline Model LBF (Medium Load Type)	COMPACT BALL SPLINE (WSPT Series)	Ball Splines - Both Ends Stepped	Ball Splines - Both Ends Stepped and Threaded	Ball Splines - One End Stepped	COMPACT BALL SPLINE (WSPL Series)	Miniature Hexagonal Spline, Single Nut (HTK) / Double Nut (HTKW) Series	COMPACT BALL SPLINE (WSPTF Series)	Compex- Ball Spline Cylindrical WSPTO	COMPACT BALL SPLINE (WSPFL Series)	COMPACT BALL SPLINE (WSPK Series)	Ball Splines - One End Stepped and Threaded	COMPACT BALL SPLINE (WSPKL Series)
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D						2D / 3D
From					4,884,585 VND			5,500,945 VND				5,500,945 VND		6,104,561 VND	5,903,448 VND	6,104,700 VND	6,440,110 VND		7,235,009 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	85 Day(s) or more	14 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	14 Day(s)	11 Day(s) or more	14 Day(s)	14 Day(s)	14 Day(s)	14 Day(s)	8 Day(s) or more	14 Day(s)
Nut Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Cylindrical	Key Provided Type / Flanged Type	Flanged Type	Cylindrical	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type	Flanged Type	Flanged Type	Key Provided Type	Flanged Type	Flanged Type	Key Provided Type / Flanged Type	Flanged Type
Spline Shaft Outer Dia. D(Ø)	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8	8 ～ 30.8	5 ～ 12	6 ～ 30.8	-	12	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8	5 ～ 6	-	12	16	5 ～ 6	12	6 ～ 30.8	15 ～ 21
Type	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Polygonal	Solid	Solid	Solid	Solid	Solid	Solid
Nut Length	Standard	Standard	Standard	Standard	18 / 21 / 35	Standard	Standard	36	Standard	Standard	Standard	Long	Standard	36	Standard	26 / 30	35	Standard	Long
Nut Overall Length L1(mm)	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	-	25 ～ 80	40	-	25 ～ 80	25 ～ 80	25 ～ 80	26 ～ 30	11.5 ～ 17.5	-	50	-	-	25 ～ 80	28 ～ 54
Nut Outer Dia. D1(Ø)	14 ～ 47	14 ～ 47	14 ～ 47	16 ～ 47	10 ～ 21	14 ～ 47	23	24	14 ～ 47	14 ～ 47	14 ～ 47	10 ～ 12	10	24	31	10 ～ 12	21	14 ～ 47	15 ～ 38
Preload	Standard	Standard	Standard	Standard	-	Standard	Standard / Light Preload / Medium Preload	-	Standard	Standard	Standard	Standard	Standard	-	-	-	-	Standard	-
Accuracy Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade
End Shape (Left)	Standard	Tapped	Tapped	Stepped and Tapped	-	Stepped and Threaded	Standard	-	Stepped	Stepped and Threaded	Stepped	Standard	Standard	-	Standard	-	-	Stepped and Threaded	-
End Shape (Right)	Standard	Tapped	Standard	Stepped and Tapped	-	Tapped	Standard	-	Stepped	Stepped and Threaded	Standard	Standard	Standard	-	-	-	-	Standard	-
Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	-	Middle Torque	High Torque	-	Middle Torque	Middle Torque	Middle Torque	-	Middle Torque	-	-	-	-	Middle Torque	-
Shaft material	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUJ2	SUS440C Equivalent / SUJ2 Equivalent	-	SUJ2	SCM415 Equivalent / SUS440C Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	-	SUS304	SUJ2	-	SUJ2	SUJ2	SUS440C Equivalent / SUJ2 Equivalent	-
Number of Nuts(pc(s).)	1 ～ 2	-	-	-	1	-	1	1	-	-	-	1	-	1	1	1	1	-	1

Loading...Tải…