• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Standard

  MISUMI

  This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Tapped

  MISUMI

  This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped Tapped

  MISUMI

  ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Tapped

  MISUMI

  ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped

  MISUMI

  ball spline with stepped edges on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped

  MISUMI

  A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped and Threaded, One End Tapped

  MISUMI

  A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - Both Ends Stepped and Threaded

  MISUMI

  A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Splines - One End Stepped and Threaded

  MISUMI

  ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Nut Type
Spline Shaft Outer Dia. D(Ø)
Type
Nut Length
Nut Overall Length L1(mm)
Nut Outer Dia. D1(Ø)
Preload
Accuracy Grade
End Shape (Left)
End Shape (Right)
Torque
Shaft material
Number of Nuts(pc(s).)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Ball Splines - Standard	Ball Splines - Both Ends Tapped	Ball Splines - Both Ends Stepped Tapped	Ball Splines - One End Tapped	Ball Splines - Both Ends Stepped	Ball Splines - One End Stepped	Ball Splines - One End Stepped and Threaded, One End Tapped	Ball Splines - Both Ends Stepped and Threaded	Ball Splines - One End Stepped and Threaded
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	-	-	-	-	-	-	-	-	-
Days to ShipSố ngày giao hàng	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Nut Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type	Key Provided Type / Flanged Type
Spline Shaft Outer Dia. D(Ø)	6 ～ 30.8	6 ～ 30.8	8 ～ 30.8	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8	6 ～ 30.8
Type	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid	Solid
Nut Length	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Nut Overall Length L1(mm)	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80	25 ～ 80
Nut Outer Dia. D1(Ø)	14 ～ 47	14 ～ 47	16 ～ 47	14 ～ 47	14 ～ 47	14 ～ 47	14 ～ 47	14 ～ 47	14 ～ 47
Preload	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Accuracy Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade
End Shape (Left)	Standard	Tapped	Stepped and Tapped	Tapped	Stepped	Stepped	Stepped and Threaded	Stepped and Threaded	Stepped and Threaded
End Shape (Right)	Standard	Tapped	Stepped and Tapped	Standard	Stepped	Standard	Tapped	Stepped and Threaded	Standard
Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque	Middle Torque
Shaft material	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SCM415 Equivalent / SUS440C Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent	SUS440C Equivalent / SUJ2 Equivalent
Number of Nuts(pc(s).)	1 ～ 2	-	-	-	-	-	-	-	-

Loading...Tải…