(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.
THK Single Axis Actuators（With or w/o Motors：Not Provided (Installed by customers)）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
17 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 33 Standard Grade 6 ～ 20 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 39.5 ～ 76 Standard / Low Particle Generation 13 Not Provided 37.4 ～ 86 Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more 
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 26 Standard Grade / High Grade / Precision Grade 2 ～ 6 Long 1 pc. / Long 2 pcs. - Main Body - Not Provided (Installed by customers) - Standard 8 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 33 Standard Grade / High Grade / Precision Grade 6 ～ 20 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs - Main Body Not Provided / Provided Not Provided (Installed by customers) - Standard 13 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 20 Standard Grade / High Grade / Precision Grade 1 ～ 6 Long 1 pc. / Long 2 pcs. - Main Body - Not Provided (Installed by customers) - Standard 6 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 26 Standard Grade 2 ～ 6 Long 1 pc. / Long 2 pcs. Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 47.4 ～ 64.2 Standard / Low Particle Generation 8 Not Provided 31 ～ 62 Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 45 Standard Grade 10 ～ 20 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 43.5 ～ 108 Standard / Low Particle Generation 15 Not Provided 53 ～ 104 Not Provided Not Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 33 Standard Grade / High Grade / Precision Grade 6 ～ 10 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs - Main Body - Not Provided (Installed by customers) - Standard 10 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 20 Day(s) or more
20 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 30 Standard Grade 6 ～ 10 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 39.5 ～ 74.4 Standard / Low Particle Generation 10 Not Provided 38 ～ 80 Not Provided Not Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.[Features]・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.[5 custom made]・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 26 Standard Grade 2 ～ 6 Long 1 pc. / Long 2 pcs. Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 47.4 ～ 64 Standard / Low Particle Generation 8 Not Provided 31 ～ 62 Not Provided Not Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 46 Standard Grade / High Grade / Precision Grade 10 ～ 20 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs - Main Body - Not Provided (Installed by customers) - Standard 15 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 20 Day(s) or more
20 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 26 Standard Grade / High Grade / Precision Grade 2 ～ 6 Long 2 pcs. - Main Body Not Provided / Provided Not Provided (Installed by customers) - Standard 8 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 30 Standard Grade / High Grade / Precision Grade 6 ～ 10 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs - Main Body - Not Provided (Installed by customers) - Standard 10 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 15 High Grade / Precision Grade 1 ～ 2 Long 2 pcs. - Main Body - Not Provided (Installed by customers) - Standard 5 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 45 Standard Grade / High Grade / Precision Grade 10 ～ 20 Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs - Main Body - Not Provided (Installed by customers) - Standard 15 Not Provided - Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
A compact, high-rigidity and high-precision actuator with an integrated inner block consisting of an LM block and ball screw nut.In addition, as the housing A/B serves as a support unit and the inner block serves as a table, it is possible to dramatically reduce the steps in designing and assembling.[Features] · Arranged to make contact at an angle of 45° such that the load is equal in 4 directions, enabling use in various positions. · The linear guide is made of 4 rows of circular arced grooves for a highly rigid guide with no cracks. · Changes to friction resistance due to changes in load are suppressed as far as possible, promoting high-accuracy feeding. · The U-shaped cross-sectional outer rail improves rigidity against moment and torsion.[Effects of Using Ball Retainer] · The grease retention capacity has been improved, allowing long-term maintenance-free operation. (QZ Lubricator is attached to the ball screw.) · Eliminates mutual friction between balls, reduces torque fluctuation and achieves excellent sliding performance. · In addition, since the basic dynamic load rating of the LM guide and ball screw is higher than conventional products, it has a long service life.
- CAD ：
- 2D
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 20 Standard Grade / High Grade / Precision Grade 1 Long 1 pc. / Long 2 pcs. Straight Main Body Not Provided / Provided Not Provided (Installed by customers) 33.2 Standard 6 Not Provided 52 Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 20 Standard Grade 1 ～ 6 Long 1 pc. / Long 2 pcs. Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 33.2 ～ 46 Standard / Low Particle Generation 6 Not Provided 23 ～ 52 Not Provided Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab
Nominal (Height) Accuracy Lead(mm) Table Motor Mounting Orientation Main Body, Peripheral Components Cover With or w/o Motors Table Length L1(mm) Grease Ball Screw Shaft Dia.(Ø) With or w/o Lubricant Unit Table Width W1(mm) Amplifier Voltage With or w/o Retainer 20 Standard Grade 1 ～ 6 Long 1 pc. / Long 2 pcs. Straight / Folded Main Body Not Provided / Provided Not Provided (Installed by customers) 33.2 ～ 46 Standard / Low Particle Generation 6 Not Provided 23 ～ 52 Not Provided Not Provided Days to Ship: Số ngày giao hàng: 23 Day(s) or more
23 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Nominal (Height) |
| Accuracy |
| Lead(mm) |
| Table |
| Motor Mounting Orientation |
| Main Body, Peripheral Components |
| Cover |
| With or w/o Motors |
| Table Length L1(mm) |
| Grease |
| Ball Screw Shaft Dia.(Ø) |
| With or w/o Lubricant Unit |
| Table Width W1(mm) |
| Amplifier Voltage |
| With or w/o Retainer |
You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.    | |
| BrandNhãn hiệu | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product SeriesDòng sản phẩm | |||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Days to ShipSố ngày giao hàng | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 20 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 20 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more | 23 Day(s) or more |
| Nominal (Height) | 33 | 26 | 33 | 20 | 26 | 45 | 33 | 30 | 26 | 46 | 26 | 30 | 15 | 45 | 20 | 20 | 20 |
| Accuracy | Standard Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade |
| Lead(mm) | 6 ～ 20 | 2 ～ 6 | 6 ～ 20 | 1 ～ 6 | 2 ～ 6 | 10 ～ 20 | 6 ～ 10 | 6 ～ 10 | 2 ～ 6 | 10 ～ 20 | 2 ～ 6 | 6 ～ 10 | 1 ～ 2 | 10 ～ 20 | 1 | 1 ～ 6 | 1 ～ 6 |
| Table | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. |
| Motor Mounting Orientation | Straight / Folded | - | - | - | Straight / Folded | Straight / Folded | - | Straight / Folded | Straight / Folded | - | - | - | - | - | Straight | Straight / Folded | Straight / Folded |
| Main Body, Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Cover | Not Provided / Provided | - | Not Provided / Provided | - | Not Provided / Provided | Not Provided / Provided | - | Not Provided / Provided | Not Provided / Provided | - | Not Provided / Provided | - | - | - | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided |
| With or w/o Motors | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) |
| Table Length L1(mm) | 39.5 ～ 76 | - | - | - | 47.4 ～ 64.2 | 43.5 ～ 108 | - | 39.5 ～ 74.4 | 47.4 ～ 64 | - | - | - | - | - | 33.2 | 33.2 ～ 46 | 33.2 ～ 46 |
| Grease | Standard / Low Particle Generation | Standard | Standard | Standard | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Low Particle Generation | Standard / Low Particle Generation |
| Ball Screw Shaft Dia.(Ø) | 13 | 8 | 13 | 6 | 8 | 15 | 10 | 10 | 8 | 15 | 8 | 10 | 5 | 15 | 6 | 6 | 6 |
| With or w/o Lubricant Unit | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Table Width W1(mm) | 37.4 ～ 86 | - | - | - | 31 ～ 62 | 53 ～ 104 | - | 38 ～ 80 | 31 ～ 62 | - | - | - | - | - | 52 | 23 ～ 52 | 23 ～ 52 |
| Amplifier Voltage | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| With or w/o Retainer | Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Nominal (Height)
- 15
- 20
- 26
- 30
- 33
- 45
- 46
- 58
- 21
- 27
- 40
- 57
- 48
- 68
- 32
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
See the accuracy standard of each manufacturer.
-
Lead(mm)
-
Table
-
Long 1 pc.
-
Long 2 pcs.
-
Short 1 pcs
-
Short 2 pcs
-
Long 1 pc.
-
Motor Mounting Orientation
-
Straight
-
Folded
-
Straight
-
Main Body, Peripheral Components
- Main Body
- Peripheral Components
-
Cover
-
Not Provided
-
Provided
-
Not Provided
-
With or w/o Motors
-
Table Length L1(mm)
-
Grease
- Standard
- Low Particle Generation
-
Ball Screw Shaft Dia.(Ø)
-
With or w/o Lubricant Unit
-
Table Width W1(mm)
-
Amplifier Voltage
-
With or w/o Retainer
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy