Knob Screws（Page6）

Stainless Hand Knob_KSH

NABEYA BI-TECH

It is made of stainless steel and has excellent corrosion resistance.

CAD ：

2D / 3D

Stainless Steel Ball Knob_KSB

NABEYA BI-TECH

Stainless Steel Ball KSBBall Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Ball Knobs● Thread Size : M4, M5, M6 and M8● Main Body Outer Diameter (mm.) : 16, 20 ,25 and 32● Material : Stainless Steel SUS303[Application]Plastic Knobs Screws are commonly used in fastening, assembly, adjustment, c...Readmore

CAD ：

2D / 3D

Spin Knob with Flange_EAC

NABEYA BI-TECH

You can select the spin color.

CAD ：

2D / 3D

Power Cross Knob_KJB

NABEYA BI-TECH

Built-in axial bearing. By reducing the friction of the seating surface, you can obtain twice the normal tightening force.

CAD ：

2D / 3D

Plastic Wing Knob KUWM/KUWF

NABEYA BI-TECH

[Features]· Designed in consideration of the seven principles of universal design.· Easy to operate.· Standardized screw made of steel.· Many thread sizes from M4 to M10.· 5 color variations which support the universal color design of machines· equipment.- Beautiful two-tone, color mix with dark gray.

CAD ：

2D / 3D

Plastic Balls Knobs_KBA/KBC

NABEYA BI-TECH

Beautiful matte black. High quality feeling.

CAD ：

2D / 3D

Plastic Mini-Knob_KIM/KIF

NABEYA BI-TECH

Mini plastic knob.[Features]·The material is steel.·You can select the type and the material of the screw part by the product code.·KIM: Male thread, steel.·KIMS: Male thread, stainless steel.·KIF: Female thread, steel.·KIFS: Female thread, stainless steel.·Applying too much force when tightening may cause damage. Make sure that the resin cap and screw are firmly attached, and do not overtighten.[Applications]·When you want to install a...Readmore

CAD ：

2D / 3D

Cross Knob CK/CKT

NABEYA BI-TECH

Steel cross knob.[Features]·FC200, chijimi baking paint.·Pilot hole or female thread can be selected by product code.·CK-prepared hole, CKT-female thread.[Applications]·When you want to install and remove screws without tools.

CAD ：

2D / 3D

Index Mechanism Knob_LXY-A

NABEYA BI-TECH

Positioning can be done at an angle of 6° or an integer multiple thereof.[Features]· LXY made of - A - steel.· LXYS made of - A - stainless steel.· Positioning can be done at an angle of 6° or its multiple, that is, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30.· It is an accurate and durable mechanism where the same results cannot be obtained by other methods, such as positioning the pin.

CAD ：

2D / 3D

Adjustable Mechanism Knob_LXZ

NABEYA BI-TECH

It rotates 360°, so it is possible to change the position slightly in either clockwise or counterclockwise rotation.

CAD ：

2D / 3D

T Handle Knob (TH)

IMAO CORPORATION

Resin knob with high mechanical strength and the grip part fit to the hand. Operating temperature -20°C to 110°C.

CAD ：

2D / 3D

Aluminum Cross Knob (ALCK)

IMAO CORPORATION

Aluminum cross knob that uses a cross shape and which can strongly tighten. It is also light.

CAD ：

2D / 3D

Wing Knob (CWN)

IMAO CORPORATION

Wing Knob (CWN)Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Wing type● Thread Size : M5, M6 and M8● Material : SUM22LKnob - PolyamideScrews - Male Thread (S10C), Female Thread (Brass)[Application]Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on

CAD ：

2D / 3D

Ergonomic Grip Knob (EGK)

IMAO CORPORATION

There are four indentations on the side faces to resist slipping, so the knob is easy to grip with a soft feeling. The boss hole can be easily covered with the center cap of the accessory after knob attachment.[Features]· Four of the sides have a dimple to prevent slipping, and there is an elastomer (TPE) applied on the surface of the knob so it has a soft touch sensation that makes it comfortable to operate.· You can use the snap method by in...Readmore

CAD ：

2D / 3D

Three Lobed Knob (Made of SUS) (TK-SUS)

IMAO CORPORATION

Stainless steel knob with a stylish design which is most suitable for use with food machines and sanitary equipment.

CAD ：

2D / 3D

Knurled Knob (KN/KS)

IMAO CORPORATION

It is a knob with large dimples on the side, which makes it easy to operate and difficult to slip. There are variations of threading, female, female through, and male.

CAD ：

2D / 3D

Round Knob (RK/RKF/RKP/RKM)

IMAO CORPORATION

Various types, such as no scale, with calibration, with arrow, and without flange are available. It can also be used for the operation of a potentiometer (resistor).[Features]· The center cap can be removed by pushing it from the back with a pen etc.

CAD ：

2D / 3D

Long Knurling Knob (LKF, LKK)

IMAO CORPORATION

[Features]·Offering white one suitable for medical applications. ·Long type knurled knob.

CAD ：

2D / 3D

Square T Handle Knob (Made of Aluminum) (TH-A)

IMAO CORPORATION

[Features]·Matte Black color knob. [Materials]·Made of Aluminum.

CAD ：

2D / 3D

Indicator Knob (INK)

IMAO CORPORATION

[Features]·Indicator knob with enlarged arrow to make it easier to see.

CAD ：

2D / 3D

Star Knob (STK)

IMAO CORPORATION

STK-AE self-extinguishing UL94V-0 certification, operating temperature -30 degrees to 150 degrees.[Features]· STK-AE self-extinguishing UL94V-0 certification, operating temperature -30 degrees to 150 degrees

CAD ：

2D / 3D

Star Knob Soft (STK-SOFT)

IMAO CORPORATION

It has a star shape grip that you can grasp easily and has a soft feeling.[Features]· The grip portion a soft touch knob covered with a thermoplastic elastomer (TPE).- Provides a soft feeling and doesn't cause fatigue

CAD ：

2D / 3D

Stainless Steel Wing Knob (WK)

IMAO CORPORATION

[Features]· Stainless steel knobs suitable for use in food machinery and sanitary equipment.You can choose from two thread diameters, (M5 or M6, M8 or M10) with the same size.

CAD ：

2D / 3D

Self Make Flute Knob (SMFK)

IMAO CORPORATION

[Features]· Utilizes commercially available hexagon bolts and hexagonal nuts, so knobs with suitable specifications can be made.

CAD ：

2D / 3D

Knurling Knob Soft (KN-SOFT)

IMAO CORPORATION

It is hard to slip due on the dimples on the side, and is a knob that you can easily grip and which provides a soft feeling.[Features]· The grip portion a soft touch knob covered with a thermoplastic elastomer (TPE).- Provides a soft feeling and doesn't cause fatigue

CAD ：

2D / 3D

Hand Knob (Made of SUS) (HK-SUS)

IMAO CORPORATION

It is a stainless steel hand knob with excellent rust prevention.

CAD ：

2D / 3D

Wave Key Knob (WAVE-KEY)

IMAO CORPORATION

It is the key you use for a star knob (key specifications). It is sold separately from the knob.[Features]· This is a security knob, and cannot be removed without a key.· Can be used outdoors

Ergonomic Seven Lobed Knobs (ELK)

IMAO CORPORATION

[Features]· The dimples on the side of the knob are designed based on ergonomics and give a comfortable grip feeling, and a lot of tightening can be achieved with little force.- Although the standard color of the top of the main unit is black, we also accept orders for orange, gray, yellow, light blue, and red

CAD ：

2D / 3D

Star Knob (Key Specifications) (STK-LK)

IMAO CORPORATION

This is a plastic knob for security. It can not be removed without a key. It can be used outdoors. Operating temperature -30 degrees to 100 degrees.

CAD ：

2D / 3D

Three Lobe Knob (TK, TS)

IMAO CORPORATION

Resin made knob with a stylish design. Increase the added value of the device you attach it to. It can be used at temperatures between -30°C and 90°C.

CAD ：

2D / 3D

Hand Knob (HK)

IMAO CORPORATION

Hand Knob (HK)Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Six Lobed Knobs● Main Body Outer Diameter (mm.) : 40, 50, 63 and 80● Material :Knobs - FC200[Application]Hand Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on

CAD ：

2D / 3D

Bar Knob (BK)

IMAO CORPORATION

Strong tightening can be done by using the bar.[Features]· Strong tightening can be performed by using the bar

CAD ：

2D / 3D

Five Lobe Knob (FK)

IMAO CORPORATION

Pentagonal resin knob with square hole specification for the boss. Operating temperature -30 degrees to 130 degrees.

CAD ：

2D / 3D

T Type Adjustment Handle Knob (ATH-N)

IMAO CORPORATION

As you pull up on the knob, the serration will come off and it will be freed. You can avoid interference etc. during installation. Operating temperature -30 degrees to 130 degrees.

CAD ：

2D / 3D

Ergonomic Single Wing Nut Knob (ESWN)

IMAO CORPORATION

The recess of the wing is designed based on ergonomics to fit the fingers perfectly. Operating temperature -30 degrees to 130 degrees.[Features]· The shape of the wings designed based on ergonomics fit the fingers and do not hurt the hand, even when using strong force.· The cap can be easily removed by pushing out the bolt by the screws from the back

CAD ：

2D / 3D

Ergostyle Knurled Knob (EKK)

IMAO CORPORATION

It is a knob of excellent design. There are variations including female thread, male thread and six different colors.

CAD ：

2D / 3D

Stainless-Steel Hand Knob (HK-N-SUS)

IMAO CORPORATION

This is a stainless steel hand knob. There are variations, including precision hole, female thread, and female through thread. Precision hole and female thread type which aren't indented on the top are ideal for food machinery and cleaning machines.[Features]· Precision hole and female thread type which aren't indented on the top of the knob are ideal for food machinery and washing machines, etc.

CAD ：

2D / 3D

Tommy Knob Screw (TMY)

IMAO CORPORATION

[Features]·Tommy screws available with and without O-rings.

CAD ：

2D / 3D

Knurled Knob (BJ750-N)

IMAO CORPORATION

It has dimples on the sides making it slip resistant, and an easy to operate nut. Perfect for jig etc. There are variations including black dye, chrome plating, and stainless steel.

CAD ：

2D / 3D

Safety, Adjust Star, Knob (SSTK-N)

IMAO CORPORATION

Normally, the knob is free. The serrations engage only when the knob is pushed down, and it then becomes possible to operate. Operating temperature -30 degrees to 130 degrees.[Features]· It can be operated only when the knob is pushed down, so there is no worry of malfunction due to accidental contact etc.

CAD ：

2D / 3D

Safety Adjustment T-Type Handle Knob (STH-N)

IMAO CORPORATION

Normally, the knob is free. The serrations engage only when the knob is pushed down, and it then becomes possible to operate. Operating temperature -30 degrees to 130 degrees.[Features]· It can be operated only when the handle is pushed down, so there is no worry of malfunction due to accidental contact etc.- Since knurling is applied to the bottom of the main unit, initial tightening work can be done comfortably

CAD ：

2D / 3D

Stainless Gripping Ball Knob, Mirror Finish, SUSBA

KONISHI

Stainless Steel ball.[Features]・ Safe grip with no round protrusion・ Made of stainless steel SUS304, the surface is buffed and mirror finished[Applications]・ Can be used as a knob by screwing into the tip of the shaft

CAD ：

2D

Stainless-Steel Wing Knob SW

KONISHI

Stainless steel wing knob manufactured with lost wax casting. Not affected by corrosion and is thus ideal for food machinery or equipment installed outdoors. One model has a tapped center boss and the other is solid. Please select according to your needs.

CAD ：

2D

Stainless Steel Hand Knob ZS, ZS-T

KONISHI

It is a stainless steel hand knob manufactured with lost wax casting. Because there is no worry of corrosion, it is the optimal part for food machinery / outdoor installation equipment. One model has a tapped center boss and the other is solid. Please select according to your needs.

CAD ：

2D

Cross Knob CK

KONISHI

Variations include the center hole, reamer hole and tap hole processed in the boss center, please choose one.[Features]・ A durable knob made of cast iron equivalent to JIS B 2603-4· Standardized tapped hole with center hole type

CAD ：

2D