(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
MISUMI Bearings with Resin（Allowable Load Range：50.1~100.0）
|
Outer Ring Type
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
18 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Silicon Rubber / Urethane Molded Bearings - Threaded Flat
MISUMI
Bearings with resin are automation components. They offer a wide variety of sizes to choose from.[Feature]● Outer diameter (D) Minimum/Maximum (mm.) : 10 and 65● Inner diameter (d) Minimum/Maximum (mm.) : 3 and 25● Material- Resin : Antistatic Urethane, Silicon Rubber and Urethane (General)- Bearing : Steel (SUJ2) and Stainless Steel (SUS440C Equivalent)[Application]Bearings with resin are commonly used in industrial machinery.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 12 ～ 45 Urethane / Silicone Screw 3 ～ 12 Standard 3 ～ 20 Steel / Stainless Steel Hex Socket 3 ～ 10 50.1~100.0 51 ～ 98 - From: 290,888 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Silicon Rubber / Urethane Molded Bearings - Flat
MISUMI
Bearings with resin are automation components. They offer a wide variety of sizes to choose from.[Feature]● Outer diameter (D) Minimum/Maximum (mm.) : 10 and 65● Inner diameter (d) Minimum/Maximum (mm.) : 3 and 25● Material- Resin : Antistatic Urethane, Silicon Rubber and Urethane (General)- Bearing : Steel (SUJ2) and Stainless Steel (SUS440C Equivalent)[Application]Bearings with resin are commonly used in industrial machinery.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 12 ～ 45 Urethane / Silicone Hole 3 ～ 12 Standard 3 ～ 20 Steel / Stainless Steel - - 50.1~100.0 51 ～ 98 - From: 159,220 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - No Retaining Ring - Threaded Stud Hex Socket
MISUMI
quiet resin roller with resin molded on the outer ring of the bearing. Used in various devices as transportation rollers, guide rollers, and traveling rollers. Excellent in reducing noise and vibration. The roller part has a flat shape and the mounting method is a male thread type. Resin materials include polyacetal, antistatic polyacetal, MC nylon, and ultra-high molecular weight polyethylene. ApplicationsAutomatic sorting equipment (sorter), conveyance equipmentChain conveyor equipment, automatic assembly line equipment, vertical conveyance equipment, door opening/closing equipment
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 19 ～ 35 Nylon / Polyacetal / UHMW Screw 6 ～ 9 Standard - Steel / Stainless Steel Hex Socket / Cross Slot / Straight Slot 6 50.1~100.0 78.4 ～ 88 - From: 210,590 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Silicon Rubber / Urethane Molded Bearings - Threaded Arc
MISUMI
"This product is threaded and thus, contribute to reduction of parts count. O.D. is R-machined."
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Spherical 16 ～ 40 Urethane / Silicone Screw 5 ～ 12 Standard 4 ～ 15 Steel / Stainless Steel Hex Socket 4 ～ 10 50.1~100.0 53 ～ 94 - From: 337,806 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - No Retaining Ring - Straight Bore
MISUMI
quiet resin roller with resin molded on the outer ring of the bearing. Used in various devices as transportation rollers, guide rollers, and traveling rollers. Excellent in reducing noise and vibration. The roller part is flat. Resin materials include polyacetal, antistatic polyacetal, MC nylon, and ultra-high molecular weight polyethylene. ApplicationsAutomatic sorting equipment (sorter), conveyance equipmentChain conveyor equipment, automatic assembly line equipment, vertical conveyance equipment, door opening/closing equipment
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 19 ～ 35 Nylon / Polyacetal / UHMW Hole / Screw 6 ～ 9 Standard 6 ～ 8 Steel / Stainless Steel Hex Socket / Straight Slot 6 50.1~100.0 78.4 ～ 88 - From: 234,171 VND Special Price Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Urethane Molded Bearings - Inner Wheel Protruded (For Light Load)
MISUMI
"Since the bearing inner rings protrude, there is no need to combine stepped shafts or collars for mounting."
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 20 ～ 25 Urethane Hole 8 ～ 9 Standard 6 Steel - - 50.1~100.0 55 ～ 79 - From: 96,962 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Silicon Rubber / Urethane Molded Bearings - R Type
MISUMI
MISUMI original Bearing product having the Urethane/Silicon Rubber baked. O.D. is R-machined.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Spherical 16 ～ 40 Urethane / Silicone Hole 5 ～ 12 Standard 4 ～ 15 Steel / Stainless Steel - - 50.1~100.0 53 ～ 82 - From: 132,030 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, U Groove Type, No Thread Type
MISUMI
[Features]·The outer ring is a U-groove type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) U Groove 22 ～ 24 Polyacetal Hole / Screw 7 Standard 6 Steel / Stainless Steel Straight Slot 6 50.1~100.0 78.4 - From: 257,525 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, U Groove Type, Male Thread Type, Hex Socket Male Thread Type
MISUMI
[Features]·The outer ring is a U-groove type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) U Groove 22 ～ 24 Polyacetal Screw 7 Standard - Steel / Stainless Steel Hex Socket / Cross Slot 6 50.1~100.0 78.4 - From: 287,716 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - R Type - Threaded Stud
MISUMI
quiet resin roller with resin molded on the outer ring of the bearing. Used in various devices as transportation rollers, guide rollers, and traveling rollers. Excellent in reducing noise and vibration. The roller part is R-shaped and the installation method is a male thread type. Resin materials include polyacetal and antistatic polyacetal. ApplicationsAutomatic sorting equipment (sorter), conveyance equipmentChain conveyor equipment, automatic assembly line equipment, vertical conveyance equipment, door opening/closing equipment
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Spherical 19 ～ 35 Polyacetal Screw 6 ～ 9 Standard - Steel / Stainless Steel Hex Socket / Cross Slot / Straight Slot 6 50.1~100.0 78.4 ～ 88 - From: 287,716 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - R Type - Straight Bore
MISUMI
quiet resin roller with resin molded on the outer ring of the bearing. Used in various devices as transportation rollers, guide rollers, and traveling rollers. Excellent in reducing noise and vibration. The roller part is R-shaped. Resin materials include polyacetal and antistatic polyacetal. ApplicationsAutomatic sorting equipment (sorter), conveyance equipmentChain conveyor equipment, automatic assembly line equipment, vertical conveyance equipment, door opening/closing equipment
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Spherical 19 ～ 35 Polyacetal Hole 6 ～ 9 Standard 6 ～ 8 Steel / Stainless Steel - - 50.1~100.0 78.4 ～ 88 - From: 257,607 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - Flat Type with Bracket
MISUMI
[Features]·This is an engineering plastic bearing flat type with a bracket. ·The surface material is polyacetal (standard). ·The mounting type is a hex socket male thread.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 24 ～ 26 Polyacetal Screw 6 ～ 8 Standard - Steel / Stainless Steel Hex Socket 6 50.1~100.0 78.4 - From: 411,500 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, V-Groove Type, No Thread Type
MISUMI
[Features]·The outer ring is a V-groove type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) V Groove 22 ～ 24 Polyacetal Hole 7 Standard 6 Steel - - 50.1~100.0 78.4 - From: 257,607 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, V-Groove Type, Male Thread Type, Hex Socket Male Thread Type
MISUMI
[Features]·The outer ring is a V-groove type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) V Groove 22 ～ 24 Polyacetal Screw 7 Standard - Steel Hex Socket / Cross Slot 6 50.1~100.0 78.4 - From: 287,761 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, Single Flange Type, No Thread Type
MISUMI
[Features]·The outer ring is a single flange type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Single Flanged 24 Polyacetal Hole 7 Standard 6 Steel - - 50.1~100.0 78.4 - From: 257,607 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Silicon Rubber / Urethane Molded Bearings - Hubbed Type
MISUMI
urethane molded bearing that can be fixed to the shaft using only a set screw. Shore (hardness) can be selected from A90, A70, and A50. A90 is ether urethane, A50/A70 is ester urethane. Also, the outer diameter of the urethane can be selected from flat type and R type. The allowable load is listed in the specification table.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Flat 30 ～ 45 Urethane Hole 11 ～ 12 Standard 6 ～ 15 Steel - - 50.1~100.0 51 ～ 98 - From: 701,932 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineered Plastic Bearings - R Type with Bracket
MISUMI
[Features]·This is an engineering plastic bearing R type with a bracket. ·The surface material is polyacetal (standard). ·The mounting type is a hex socket male thread.
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Spherical 24 ～ 26 Polyacetal Screw 7 ～ 8 Standard - Steel Hex Socket 6 50.1~100.0 78.4 - From: 411,500 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Engineering Plastic Bearing, Single Flange Type, Hex Socket Male Thread Type
MISUMI
[Features]·The outer ring is a single flange type. ·The surface material is polyacetal (standard).
- Volume Discount
Outer Ring Type Outer Dia. D(Ø) Outer Ring Material Mounting Type Width B(mm) Operating/Environmental Requirement Inner Dia. d1(Ø) Bearing Material Tightening Method Screw Nominal M(mm) Allowable Load Range(N) Allowable Load(N) Shaft Dia. d2(Ø) Single Flanged 24 Polyacetal Screw 7 Standard - Steel Hex Socket 6 50.1~100.0 78.4 - From: 294,407 VND Days to Ship: Số ngày giao hàng: Same day
Same day
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Outer Ring Type |
| Outer Dia. D(Ø) |
| Outer Ring Material |
| Mounting Type |
| Width B(mm) |
| Operating/Environmental Requirement |
| Inner Dia. d1(Ø) |
| Bearing Material |
| Tightening Method |
| Screw Nominal M(mm) |
| Allowable Load Range(N) |
| Allowable Load(N) |
| Shaft Dia. d2(Ø) |
You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | Engineered Plastic Bearings - No Retaining Ring - Threaded Stud Hex Socket | Engineered Plastic Bearings - No Retaining Ring - Straight Bore | Urethane Molded Bearings - Inner Wheel Protruded (For Light Load) | Engineering Plastic Bearing, U Groove Type, Male Thread Type, Hex Socket Male Thread Type | Engineering Plastic Bearing, V-Groove Type, Male Thread Type, Hex Socket Male Thread Type | Engineering Plastic Bearing, Single Flange Type, No Thread Type | Engineering Plastic Bearing, Single Flange Type, Hex Socket Male Thread Type | |||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | 290,888 VND- | 159,220 VND Special Price On Sale Till 31/03/2025 | 210,590 VND- | 337,806 VND Special Price On Sale Till 31/03/2025 | 234,171 VND Special Price On Sale Till 31/03/2025 | 96,962 VND Special Price On Sale Till 31/03/2025 | 132,030 VND Special Price On Sale Till 31/03/2025 | 257,525 VND- | 287,716 VND- | 287,716 VND- | 257,607 VND- | 411,500 VND- | 257,607 VND | 287,761 VND- | 257,607 VND | 701,932 VND- | 411,500 VND | 294,407 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | Same day |
| Outer Ring Type | Flat | Flat | Flat | Spherical | Flat | Flat | Spherical | U Groove | U Groove | Spherical | Spherical | Flat | V Groove | V Groove | Single Flanged | Flat | Spherical | Single Flanged |
| Outer Dia. D(Ø) | 12 ～ 45 | 12 ～ 45 | 19 ～ 35 | 16 ～ 40 | 19 ～ 35 | 20 ～ 25 | 16 ～ 40 | 22 ～ 24 | 22 ～ 24 | 19 ～ 35 | 19 ～ 35 | 24 ～ 26 | 22 ～ 24 | 22 ～ 24 | 24 | 30 ～ 45 | 24 ～ 26 | 24 |
| Outer Ring Material | Urethane / Silicone | Urethane / Silicone | Nylon / Polyacetal / UHMW | Urethane / Silicone | Nylon / Polyacetal / UHMW | Urethane | Urethane / Silicone | Polyacetal | Polyacetal | Polyacetal | Polyacetal | Polyacetal | Polyacetal | Polyacetal | Polyacetal | Urethane | Polyacetal | Polyacetal |
| Mounting Type | Screw | Hole | Screw | Screw | Hole / Screw | Hole | Hole | Hole / Screw | Screw | Screw | Hole | Screw | Hole | Screw | Hole | Hole | Screw | Screw |
| Width B(mm) | 3 ～ 12 | 3 ～ 12 | 6 ～ 9 | 5 ～ 12 | 6 ～ 9 | 8 ～ 9 | 5 ～ 12 | 7 | 7 | 6 ～ 9 | 6 ～ 9 | 6 ～ 8 | 7 | 7 | 7 | 11 ～ 12 | 7 ～ 8 | 7 |
| Operating/Environmental Requirement | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Inner Dia. d1(Ø) | 3 ～ 20 | 3 ～ 20 | - | 4 ～ 15 | 6 ～ 8 | 6 | 4 ～ 15 | 6 | - | - | 6 ～ 8 | - | 6 | - | 6 | 6 ～ 15 | - | - |
| Bearing Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Tightening Method | Hex Socket | - | Hex Socket / Cross Slot / Straight Slot | Hex Socket | Hex Socket / Straight Slot | - | - | Straight Slot | Hex Socket / Cross Slot | Hex Socket / Cross Slot / Straight Slot | - | Hex Socket | - | Hex Socket / Cross Slot | - | - | Hex Socket | Hex Socket |
| Screw Nominal M(mm) | 3 ～ 10 | - | 6 | 4 ～ 10 | 6 | - | - | 6 | 6 | 6 | - | 6 | - | 6 | - | - | 6 | 6 |
| Allowable Load Range(N) | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 | 50.1~100.0 |
| Allowable Load(N) | 51 ～ 98 | 51 ～ 98 | 78.4 ～ 88 | 53 ～ 94 | 78.4 ～ 88 | 55 ～ 79 | 53 ～ 82 | 78.4 | 78.4 | 78.4 ～ 88 | 78.4 ～ 88 | 78.4 | 78.4 | 78.4 | 78.4 | 51 ～ 98 | 78.4 | 78.4 |
| Shaft Dia. d2(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Outer Dia. D(Ø)
-
Outer Ring Material
- Urethane
- Nylon
- Polyacetal
- Silicone
- Stainless Steel
- Steel
- UHMW
-
Mounting Type
-
Hole -
Shaft -
Screw
-
-
Width B(mm)
-
Operating/Environmental Requirement
- Standard
- Antistatic Property
- High Load Capacity
- Abrasion Resistance
- Durability
- Dust Resistance
- Corrosion Resistance
-
Inner Dia. d1(Ø)
-
Bearing Material
-
Tightening Method
-
Screw Nominal M(mm)
-
Allowable Load Range(N)
-
Allowable Load(N)
-
Shaft Dia. d2(Ø)
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to Bearings with ResinDanh mục liên quan đến Bearings with Resin
FAQ about Conveyor Bearings
-
- Question: What is Maximum allowable load for Engineered Plastic Bearings?
- Answer: Please see more details at Maximum allowable load of Ball bearings.
- Question: Can I order single piece for thread part of Engineered Plastic Bearings?
- Answer: Thread part of Engineered Plastic Bearings is not available in single piece.
- Question: What are bearings with resin and how are they used in automation components?
- Answer: Bearings with resin are a type of bearing that incorporates engineered plastics, such as polyacetal (POM) or silicone rubber, in their construction. They are used in automation components for various such as transportation rollers, guide rollers, automatic sorting equipment (sorters), conveyance equipment, chain conveyor equipment and so on
- Question: What types of materials are typically used in the outer rings of resin bearings?
- Answer: The outer rings of resin bearings are typically made from various materials, including
1. Acetal resin is a high-performance engineering thermoplastic known for its excellent mechanical properties, including high stiffness, low friction, and resistance to wear and tear.
2. Polyacetal offers similar properties such as high stiffness, low friction, and wear resistance. Polyacetal resin bearings provide similar performance benefits as acetal resin bearings and are commonly used in automation components where these properties are required.
3. Antistatic polyacetal bearings are suitable for use in automation components where electrostatic discharge (ESD) protection is necessary to prevent damage to sensitive electronic equipment - Question: How do I determine the right outer diameter and width for a resin bearing?
- Answer: To determine the appropriate outer diameter and width for a resin bearing, several factors must be considered, including the load capacity, speed, and operating conditions of the application. The outer diameter of a resin bearing can be calculated using the formula D = d + 2B,
D represents the outer diameter,
d denotes the inner diameter,
B stands for the width of the bearing.
The width of the bearing can be determined based on the load capacity and speed of the application, ensuring it is adequate to support the load and prevent excessive wear. Additionally, the width of the bearing can be adjusted according to the operating conditions of the application, such as temperature, humidity, and exposure to chemicals. - Question: What are the key features to look for in high-quality resin bearings?
- Answer: Bearings with resin require high-quality materials and low friction; moreover, they are known for durability in working environments. Precise manufacturing ensures accurate dimensions and proper fit, crucial for smooth operation. They must handle loads effectively, resist corrosion, and remain stable across temperature variations. Effective sealing guards against contamination, preserving performance integrity. Additionally, they should demand minimal maintenance, reducing downtime and costs.
- Question: How do resin bearings compare to traditional metal bearings in terms of performance?
- Answer: Bearings with resin and traditional metal bearings each offer distinct performance characteristics:
1. Friction and Wear: Resin bearings typically have lower friction coefficients, reducing energy consumption and heat generation. Metal bearings may excel in wear resistance, especially under high-load or abrasive conditions.
2. Corrosion Resistance: Resin bearings inherently resist corrosion, making them suitable for moist or chemically exposed environments. Metal bearings might require additional coatings for similar protection.
3. Weight: Resin bearings are lighter than metal ones, advantageous in weight-sensitive applications. Metal bearings, though heavier, may offer higher load capacities.
4. Load Capacity: Metal bearings generally have higher load capacities than resin bearings, making them preferable for heavy-duty applications.
5. Temperature Range: Metal bearings often tolerate wider temperature ranges, while resin bearings may soften or degrade at high temperatures. - Question: What are the advantages of using urethane or silicone in resin bearings?
- Answer: Using urethane or silicone in resin bearings provides several advantages. These materials offer excellent flexibility, resilience, and vibration absorption, reducing the risk of damage to bearings and components. They also exhibit low friction properties, ensuring smooth movement and minimal wear. Additionally, urethane and silicone contribute to noise reduction during operation. Their resistance to chemicals and stability across a wide temperature range enhance durability and reliability in diverse environments.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy