(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(88 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

PFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC] Change Tapped Thread N to Fine One [NSC] F P Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
ClearTrống
Heat Treatment
- Not Provided
- Induction Hardened
ClearTrống
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
ClearTrống
Length L(mm)
[25-1398/1mm Unit(s)]
ClearTrống
Shaft Fit Tolerance
f8

g6

h5
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
ClearTrống
Add Wrench Flats at One Location [SC](mm)
[0-1388/1mm Unit(s)]
ClearTrống
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
ClearTrống
F(mm)
[2-88/1mm Unit(s)]
ClearTrống
P(mm)
6
[7-22/1mm Unit(s)]
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
ClearTrống
type
- PFPGA
- PSFPA
- PSFPGA
- PSFUP
- PSSFPA
- PSSFUP
- RSFPA
- SFPPA
- SFUP
- SSFPA
- SSFUP
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

3 Day(s) or Less

6 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats- (Part Number)

Name: Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

PFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]

PFPGA12-[25-1198/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]

PFPGA13-[25-1198/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]

PFPGA15-[25-1198/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]

PFPGA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]

PFPGA18-[25-1198/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1188/1]

PFPGA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]

PFPGA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]

PSFPA10-[25-798/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]

PSFPA12-[25-998/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]

PSFPA13-[25-998/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]

PSFPA15-[25-998/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]

PSFPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]

PSFPA18-[25-1398/1]-F[2-80/1]-P[7-16/1]-M4-N6-SC[0-1388/1]

PSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]

PSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]

PSFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]

PSFPGA12-[25-1198/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]

PSFPGA13-[25-1198/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]

PSFPGA15-[25-1198/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]

PFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Specification expansion] In response to many requests, a new spanner grooved type with a stepped end and a female thread on one end is now available!

Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-:Related Image

Type				[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
One End Stepped, Both Ends Tapped			One End Stepped, One End Tapped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6
SFPPA	SFUP	-	SFNNA	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFPA	SSFUP	-	SSFNNA	SUS440C or 13Cr stainless		-
PSFPA	PSFUP	-	PSFNNA	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFPA	PSSFUP	-	PSSFNNA	SUS440C or 13Cr stainless
RSFPA	-	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PFPGA	-	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSFPGA	-	SUS304	-

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Specifications

Part Number	-	L	-	F	-	P	-	M	-	N	-	SC
SFPPA20 SSFPA20	- -	400 400	- -	F25 F25	- -	P16 P16	- -	M10 M10	- -	N10 N10	- -	SC10 SC10

Part Number			1mm Increments			M (Coarse) Selection											N (Coarse) Selection											Wrench Flats Dimensions			(Y)Max.	R	C
Type		D	L	F	P	M (Coarse) Selection											N (Coarse) Selection											SC	W	ℓ₁	(Y)Max.	R	C
• One End Stepped, (D Tol. g6) SFPPA SSFPA PSFPA PSSFPA RSFPA (D≤30, L≤500) (D Tol. f8) PFPGA PSFPGA • One End Stepped, One (D Tol. g6) SFNNA SSFNNA PSFNNA PSSFNNA	Both Ends Tapped Tapped (D Tol. h5) SFUP SSFUP PSFUP PSSFUP End Threaded Tapped	8	25~ 998	2≤F≤Px4	6	3											3	4	5									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	800	0.3 or Less	0.5 or Less
		10	25~ 998		6 ~ 8	3	4	5									3	4	5	6									8	8	800
		12	25~1198		6~10	3	4	5	6									4	5	6	8								10	10	1000
		13	25~1198		6~11	3	4	5	6	8								4	5	6	8								11		1000
		15	25~1198		6~13	3	4	5	6	8	10							4	5	6	8	10							13		1000
		16	25~1198		6~14	3	4	5	6	8	10							4	5	6	8	10							14		1200
		18	25~1198		8~16		4	5	6	8	10	12						4	5	6	8	10	12						16		1200
		20	25~1198		8~17		4	5	6	8	10	12						4	5	6	8	10	12						17		1200		1.0 or Less
		25	25~1198		8~22		4	5	6	8	10	12	16					4	5	6	8	10	12	16					22		1200
		30	25~1498		9~27			5	6	8	10	12	16	20	24					6	8	10	12	16	20				27	15	1500
		35	25~1498		9~32			5	6	8	10	12	16	20	24						8	10	12	16	20	24			30	15	1500	0.5 or Less
		40	25~1498		11~37				6	8	10	12	16	20	24	30						10	12	16	20	24	30		36	20	1500
		50	25~1498		11~47				6	8	10	12	16	20	24	30							12	16	20	24	30		41	20	1500

[ ! ]P dimensions require M+3≤P.
[ ! ]When Mx2.5+4+Nx2.5+4≥(Y), tap pilot holes may go through. When Mx2+Nx2≥(Y), the effective depth of larger diameter tap has priority.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
PFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
PFPGA12-[25-1198/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
PFPGA13-[25-1198/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
PFPGA15-[25-1198/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
PFPGA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
PFPGA18-[25-1198/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1188/1]
PFPGA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
PFPGA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
PSFPA10-[25-798/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
PSFPA12-[25-998/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
PSFPA13-[25-998/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
PSFPA15-[25-998/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
PSFPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
PSFPA18-[25-1398/1]-F[2-80/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
PSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
PSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
PSFPGA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
PSFPGA12-[25-1198/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
PSFPGA13-[25-1198/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
PSFPGA15-[25-1198/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
PSFPGA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
PSFPGA18-[25-1198/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1188/1]
PSFPGA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
PSFPGA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
PSFUP10-[25-1198/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-1190/1]
PSFUP12-[25-1398/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-1388/1]
PSFUP13-[25-1398/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-1388/1]
PSFUP15-[25-1398/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-1388/1]
PSFUP16-[25-1398/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1388/1]
PSFUP18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
PSFUP20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M4-N6-SC[0-1388/1]
PSFUP25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M4-N6-SC[0-1388/1]
PSSFPA10-[25-798/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
PSSFPA12-[25-998/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
PSSFPA13-[25-998/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
PSSFPA15-[25-998/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
PSSFPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
PSSFPA18-[25-1398/1]-F[2-80/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
PSSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
PSSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
PSSFUP10-[25-1198/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-1190/1]
PSSFUP12-[25-1398/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-1388/1]
PSSFUP13-[25-1398/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-1388/1]
PSSFUP15-[25-1398/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-1388/1]
PSSFUP16-[25-1398/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1388/1]
PSSFUP18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
PSSFUP20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M4-N6-SC[0-1388/1]
PSSFUP25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M4-N6-SC[0-1388/1]
RSFPA10-[25-998/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
RSFPA12-[25-1198/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
RSFPA13-[25-1198/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
RSFPA15-[25-1198/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
SFPPA10-[25-798/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
SFPPA12-[25-998/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
SFPPA13-[25-998/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
SFPPA15-[25-998/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
SFPPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
SFPPA18-[25-1198/1]-F[11-80/1]-P[7-16/1]-M4-N6-SC[0-1188/1]
SFPPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
SFPPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
SFUP10-[25-1198/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-1190/1]
SFUP12-[25-1398/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-1388/1]
SFUP13-[25-1398/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-1388/1]
SFUP15-[25-1398/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-1388/1]
SFUP16-[25-1398/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1388/1]
SFUP18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
SFUP20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M4-N6-SC[0-1388/1]
SFUP25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M4-N6-SC[0-1388/1]
SSFPA10-[25-798/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-790/1]
SSFPA12-[25-998/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-988/1]
SSFPA13-[25-998/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-988/1]
SSFPA15-[25-998/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-988/1]
SSFPA16-[25-1198/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1188/1]
SSFPA18-[25-1398/1]-F[2-80/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
SSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M4-N6-SC[0-1188/1]
SSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M4-N6-SC[0-1188/1]
SSFUP10-[25-1198/1]-F[2-32/1]-P[7-8/1]-M4-N6-SC[0-1190/1]
SSFUP12-[25-1398/1]-F[2-40/1]-P[7-10/1]-M4-N6-SC[0-1388/1]
SSFUP13-[25-1398/1]-F[2-44/1]-P[7-11/1]-M4-N6-SC[0-1388/1]
SSFUP15-[25-1398/1]-F[2-52/1]-P[7-13/1]-M4-N6-SC[0-1388/1]
SSFUP16-[25-1398/1]-F[2-56/1]-P[7-14/1]-M4-N6-SC[0-1388/1]
SSFUP18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M4-N6-SC[0-1388/1]
SSFUP20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M4-N6-SC[0-1388/1]
SSFUP25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M4-N6-SC[0-1388/1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	P (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 998	f8	No Induction Hardening	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 60	6 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	25	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1398	g6	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 80	6 ～ 16	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	10	25 ～ 998	f8	No Induction Hardening	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1198	f8	No Induction Hardening	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 60	6 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	25 ～ 1198	f8	No Induction Hardening	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	0 ～ 1190	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 60	7 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 68	7 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 88	7 ～ 22	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	25 ～ 1398	g6	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 80	6 ～ 16	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 1198	h5	Induction Hardened (56HRC~)	0 ～ 1190	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 60	7 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 68	7 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 88	7 ～ 22	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 60	6 ～ 16	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	11 ～ 80	6 ～ 16	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	0 ～ 1190	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 60	7 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 68	7 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	0 ～ 1388	-	2 ～ 88	7 ～ 22	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1398	g6	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 80	6 ～ 16	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4	6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (56HRC~)	0 ～ 1190	-	2 ～ 32	6 ～ 8	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 40	6 ～ 10	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 44	6 ～ 11	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 52	6 ～ 13	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 56	6 ～ 14	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 60	7 ～ 16	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 68	7 ～ 17	4	6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (56HRC~)	0 ～ 1388	-	2 ～ 88	7 ～ 22	4	6	-	-

Loading...Tải…

Price list

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 250	L251 ~ 300	L301 ~ 350	L351 ~ 400	L401 ~ 450	L451 ~ 500	L501 ~ 550	L551 ~ 600	L601 ~ 650	L651 ~ 700	L701 ~ 750	L751 ~ 800	L801 ~ 850	L851 ~ 900	L901 ~ 950	L951 ~ 1000	L1001 ~ 1100	L1101 ~ 1200	L1201 ~ 1300	L1301 ~ 1400	L1401 ~ 1498
SFPPA [ ! ]SFUP [ ! ]SFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
SSFPA [ ! ]SSFUP [ ! ]SSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSFPA [ ! ]PSFUP [ ! ]PSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSSFPA [ ! ]PSSFUP [ ! ]PSSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50

[ ! ]For D tolerance h5, add the relevant surcharge to the prices above. [ ! ]For One End Stepped One End Tapped Shafts, subtract the relevant charge from the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 300	L301 ~ 400	L401 ~ 500
RSFPA	8
	10
	12
	13
	15
	16
	18
	20
	25
	30

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1496
PFPGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1496
PSFPGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

Product TOP

Basic InformationThông tin cơ bản

Basic Shape	One End Stepped	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

MISUMI Unit Example related to this product

back next

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Tapped Thread N to Fine One [NSC](mm)

F(mm)

P(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats- (Part Number)

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Specifications

Alterations

Part Number

Price list

Basic InformationThông tin cơ bản

MISUMI Unit Example related to this product

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng