Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-
:
MISUMI
- Please check the content on our website as the PDF does not contain the most up-to-date information.
[Specification expansion] In response to many requests, a new spanner grooved type with a stepped end and a female thread on one end is now available!
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |||
| One End Stepped, Both Ends Tapped | One End Stepped, One End Tapped | |||||
| D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | |||
| SFPPA | SFUP | - | SFNNA | SUJ2 Equivalent | Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~ | - |
| SSFPA | SSFUP | - | SSFNNA | SUS440C or 13Cr stainless | ||
| PSFPA | PSFUP | - | PSFNNA | SUJ2 Equivalent | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~ | |
| PSSFPA | PSSFUP | - | PSSFNNA | SUS440C or 13Cr stainless | ||
| RSFPA | - | - | - | SUJ2 Equivalent | Low Temp. Black Chrome Plating | |
| - | - | PFPGA | - | S45C Equivalent | - | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~ |
| - | - | PSFPGA | - | SUS304 | ||
| D Tol. | |||
| D | g6 | h5 | f8 |
| 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
| 10 | |||
| 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
| 13 | |||
| 15 | |||
| 16 | |||
| 18 | |||
| 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
| 25 | |||
| 30 | |||
| 35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
| 40 | |||
| 50 | |||