(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(640 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

FCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Dia. D(mm)
[3-20/1mm Unit(s)]
ClearTrống
Mounting Method
- Straight
- Retaining Ring
- Cotter Pin
- Nut (Threaded)
- Tapped
- Set Screw (Set Screw Flat, D-Cut)
- Keyway
- Set Screw (V Groove)
ClearTrống
Basic Shape
- Shouldered
- Straight
ClearTrống
Material
- Steel
- Stainless Steel
ClearTrống
Hardness
- Not Spec-designed
- Hardness Requirement
ClearTrống
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
ClearTrống
Material Detail
- S45C
- SUS304
- SUS440C (Equivalent)
ClearTrống
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
ClearTrống
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
ClearTrống
G(mm)
[0-10/0.1mm Unit(s)]
ClearTrống
GC(mm)
[0-10/0.1mm Unit(s)]
ClearTrống
H(mm)
[4-30/0.5mm Unit(s)]
ClearTrống
HC(mm)
[4-30/0.5mm Unit(s)]
ClearTrống
K(mm)
[2-30/0.1mm Unit(s)]
ClearTrống
KC(mm)
[2-30/0.1mm Unit(s)]
ClearTrống
L(mm)
[5-200/0.1mm Unit(s)]
ClearTrống
M(mm)
3

4

5

6

8

10

12

16
ClearTrống
MC(mm)
3

4

5

6

8

10

12

16
ClearTrống
N(mm)
[0-125/0.1mm Unit(s)]
ClearTrống
NC(mm)
[0-125/0.1mm Unit(s)]
ClearTrống
T(mm)
[0.5-125/0.1mm Unit(s)]
ClearTrống
TC(mm)
[0.5-125/0.1mm Unit(s)]
ClearTrống
Y(mm)
[0-10/0.1mm Unit(s)]
ClearTrống
YC(mm)
[0-10/0.1mm Unit(s)]
ClearTrống
type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

7 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Pivot Pins - End Shape Combination Selectable (Part Number)

Brand :

MISUMI

Part Number :

FCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]

FCLSHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5]

FCLSHDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]

FCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1]

FCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10]

FCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]

FCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]

FCLSHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16]

FCLSHDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]

FCLSHDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1]

FCLSHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]

FCLSHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]

FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]

FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]

FCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]

FCLSHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]

FCLSHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]

FCLSHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]

FCLSHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]

FCLSHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]

FCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Shaft End Shapes are selectable.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
FCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]
FCLSHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLSHDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]
FCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]
FCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLSHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLSHDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1]
FCLSHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLSHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
FCLSHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLSHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHFA-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLSHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLSHFD-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLSHFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHFF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHFG-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHFH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLSHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHGA-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]
FCLSHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-50/0.1]
FCLSHGD-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
FCLSHGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHGG-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHGH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-125/0.1]
FCLSHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1]
FCLSHHA-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]
FCLSHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1]
FCLSHHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLSHHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1]
GFCLAA-D[3-20/1]-L[5-200/0.1]
GFCLAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1]
GFCLAD-D[3-20/1]-L[5-200/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
GFCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLAF-D[6-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLAG-D[3-20/1]-L[5-200/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLAH-D[6-20/1]-L[5-200/0.1]-NC[2-125/0.1]
GFCLBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]
GFCLBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]
GFCLBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1]
GFCLBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1]
GFCLBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5]
GFCLBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5]
GFCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
GFCLBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
GFCLBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-125/0.1]
GFCLBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-125/0.1]
GFCLCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]
GFCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1]
GFCLCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
GFCLCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]
GFCLDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]
GFCLDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Shaft Dia. D (mm)	Mounting Method	Basic Shape	Material	Hardness	Surface Treatment	Material Detail	Left End Shape	Right End Shape	G (mm)	GC (mm)	H (mm)	HC (mm)	K (mm)	KC (mm)	L (mm)	M (mm)	MC (mm)	N (mm)	NC (mm)	T (mm)	TC (mm)	Y (mm)	YC (mm)
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	C	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Shouldered	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	D	-	-	-	7 ～ 30	-	-	5 ～ 200	-	-	2 ～ 125	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Straight	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	A	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	-	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	B	-	0 ～ 10	7 ～ 30	-	-	-	5 ～ 200	-	-	-	0 ～ 125	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	B	-	-	7 ～ 30	-	-	-	5 ～ 200	-	3 ～ 10	-	0 ～ 125	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	F	-	-	7 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	G	-	-	4 ～ 30	-	-	2 ～ 30	5 ～ 200	-	-	-	0 ～ 125	0.5 ～ 125	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	H	-	-	7 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 125	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped / Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	D	-	-	-	7 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 125	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	A	-	-	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	-	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	B	-	0 ～ 10	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	0 ～ 125	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	B	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 10	0 ～ 125	0 ～ 125	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	C	-	-	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	D	-	-	-	4 ～ 30	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	-	-	0.5 ～ 125	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	F	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	G	-	-	-	-	2 ～ 30	2 ～ 30	5 ～ 200	-	-	0 ～ 125	0 ～ 125	-	-	0 ～ 10	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	H	-	-	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	2 ～ 125	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	A	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	2 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	2 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	D	-	-	-	7 ～ 30	-	-	5 ～ 200	-	-	2 ～ 125	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 125	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Straight	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	A	-	-	-	-	-	-	5 ～ 200	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	-	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	C	-	-	-	-	-	-	5 ～ 200	-	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Straight	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	D	-	-	-	4 ～ 30	-	-	5 ～ 200	-	-	-	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	-	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	H	-	-	-	-	-	-	5 ～ 200	-	-	-	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	A	0 ～ 10	-	-	-	-	-	5 ～ 200	-	-	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	A	-	-	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	B	0 ～ 10	0 ～ 10	-	-	-	-	5 ～ 200	-	-	0 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	B	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 10	0 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	B	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 10	0 ～ 125	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	C	0 ～ 10	-	-	-	-	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	C	-	-	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	D	0 ～ 10	-	-	7 ～ 30	-	-	5 ～ 200	-	-	0 ～ 125	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	D	-	-	-	7 ～ 30	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	F	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	F	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	G	0 ～ 10	-	-	-	-	2 ～ 30	5 ～ 200	-	-	0 ～ 125	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 10	-	0 ～ 125	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	H	0 ～ 10	-	-	-	-	-	5 ～ 200	-	-	0 ～ 125	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	H	-	-	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	A	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Cotter Pin	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	D	-	-	-	4 ～ 30	-	-	5 ～ 200	-	-	2 ～ 50	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Retaining Ring / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Straight	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	D	A	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	-	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	D	B	-	0 ～ 10	7 ～ 30	-	-	-	5 ～ 200	-	-	-	0 ～ 125	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	6 ～ 20	Cotter Pin	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	D	B	-	-	7 ～ 30	-	-	-	5 ～ 200	-	3 ～ 10	-	0 ～ 125	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	10	3 ～ 20	Retaining Ring	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-

Loading...Tải…

Basic InformationThông tin cơ bản

Type	L Dimension Configurable

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

MISUMI Unit Example related to this product

back next

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

TALK

TALK ID : Misumi_vn

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Dia. D(mm)

Mounting Method

Basic Shape

Material

Hardness

Surface Treatment

Material Detail

Left End Shape

Right End Shape

G(mm)

GC(mm)

H(mm)

HC(mm)

K(mm)

KC(mm)

L(mm)

M(mm)

MC(mm)

N(mm)

NC(mm)

T(mm)

TC(mm)

Y(mm)

YC(mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Pivot Pins - End Shape Combination Selectable (Part Number)

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

MISUMI Unit Example related to this product

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース