(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.
Product Detail
Shaft Dia. D
Mounting Method
Basic Shape
Material
Hardness
Surface Treatment
Material Detail
Left End Shape
Right End Shape
G
GC
H
HC
K
KC
L
M
MC
N
NC
T
TC
Y
YC
type
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Shaft Dia. D(mm)
-
Mounting Method
-
Straight -
Retaining Ring -
Cotter Pin -
Nut (Threaded) -
Tapped -
Set Screw (Set Screw Flat, D-Cut) -
Keyway -
Set Screw (V Groove)
-
-
Basic Shape
-
Shouldered -
Straight
-
-
Material
- Steel
- Stainless Steel
-
Hardness
- Not Spec-designed
- Hardness Requirement
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
-
Material Detail
- S45C
- SUS304
- SUS440C (Equivalent)
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
G(mm)
-
GC(mm)
-
H(mm)
-
HC(mm)
-
K(mm)
-
KC(mm)
-
L(mm)
-
M(mm)
-
MC(mm)
-
N(mm)
-
NC(mm)
-
T(mm)
-
TC(mm)
-
Y(mm)
-
YC(mm)
-
type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 7 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Pivot Pins - End Shape Combination Selectable (Part Number)
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Unit examples related to this product
Similar Products
Product DetailProduct Description
Shaft End Shapes are selectable.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| FCLHBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1] |
| FCLHBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16] |
| FCLHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16] |
| FCLHBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-125/0.1] |
| FCLHBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-125/0.1] |
| FCLHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1] |
| FCLHCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1] |
| FCLHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1] |
| FCLHCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| FCLHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1] |
| FCLHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5] |
| FCLHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1] |
| FCLHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| FCLHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| FCLHDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| FCLHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| FCLHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| FCLHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| FCLHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHFA-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| FCLHFD-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHFF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHFG-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHFH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| FCLHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHGA-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1] |
| FCLHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-50/0.1] |
| FCLHGD-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| FCLHGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHGG-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHGH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-125/0.1] |
| FCLHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1] |
| FCLHHA-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1] |
| FCLHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1] |
| FCLHHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLHHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1] |
| FCLSAA-D[3-20/1]-L[5-200/0.1] |
| FCLSAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1] |
| FCLSAD-D[3-20/1]-L[5-200/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| FCLSAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLSAF-D[6-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLSAG-D[3-20/1]-L[5-200/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| FCLSAH-D[6-20/1]-L[5-200/0.1]-NC[2-125/0.1] |
| FCLSBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1] |
| FCLSBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1] |
| FCLSBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1] |
| FCLSBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLSBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLSBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Shaft Dia. D (mm) | Mounting Method | Basic Shape | Material | Hardness | Surface Treatment | Material Detail | Left End Shape | Right End Shape | G (mm) | GC (mm) | H (mm) | HC (mm) | K (mm) | KC (mm) | L (mm) | M (mm) | MC (mm) | N (mm) | NC (mm) | T (mm) | TC (mm) | Y (mm) | YC (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | E | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | F | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | G | 0 ～ 10 | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | H | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | B | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Set Screw (V Groove) | Straight | Steel | Not Spec-designed | Black Oxide | S45C | H | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | A | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 2 ～ 50 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | C | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 50 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Retaining Ring / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 50 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | C | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Shouldered | Steel | Not Spec-designed | Black Oxide | S45C | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Straight | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | A | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | B | - | 0 ～ 10 | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | B | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | C | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Nut (Threaded) / Set Screw (V Groove) | Straight | Steel | Not Spec-designed | Black Oxide | S45C | H | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Retaining Ring / Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Nut (Threaded) / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Nut (Threaded) / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | E | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped / Set Screw (V Groove) | Straight | Steel | Not Spec-designed | Black Oxide | S45C | H | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Nut (Threaded) / Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | F | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | Straight | Steel | Not Spec-designed | Black Oxide | S45C | H | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | A | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | 0.1 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | B | - | 0 ～ 10 | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | B | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | C | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | E | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | F | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | G | - | - | - | - | 2 ～ 30 | 2 ～ 30 | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | G | H | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Straight | Steel | Not Spec-designed | Black Oxide | S45C | H | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | A | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Shouldered | Steel | Hardness Requirement | Black Oxide | S45C | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Nut (Threaded) / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Straight | Steel | Hardness Requirement | Black Oxide | S45C | H | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Straight | Shouldered | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | A | - | - | - | - | - | - | 5 ～ 200 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | C | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Straight | Shouldered | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 200 | - | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Tapped | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | A | H | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | A | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | B | 0 ～ 10 | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | B | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | C | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Shouldered | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Straight | Stainless Steel | Not Spec-designed | Not Provided | SUS304 | B | E | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Type | L Dimension Configurable |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy