• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Electric Screwdriver D-331/D-332

  HOZAN

  An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.[Features]· Elastomer resin is used for slip prevention of the handle component.· Tightly fits on to the handle body and exhibits excellent gripping performance.· Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.· The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.· A design without plating in order to avoid changes in tip precision.[Applications]· Ideal for screw tightening work in deep and narrow spaces.· Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.

  From: 253,555 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Head Screwdriver Tip Size No. 00 to 2

  HOZAN

  A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.[Features]· Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.· Shaft is thin but still complies with JIS "torsional strength" standards.· The basic hardening treatment for shaft strength is skilled full quenching.· The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.· Thin and tough electroless nickel plating is used to maintain accuracy.[Applications]· Ideal for screws in deep places as often seen with home appliances.

  From: 129,599 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-501

  HOZAN

  Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.[Features]· Features a rotary head with embedded ball bearings, which offers great workability.· Vise for small diameter drills with rotating cap.· It can be smoothly rotated while pushing in the vertical direction.· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.[Applications]· It can also be used for etching by grasping a needle (probe), etc.

  From: 526,976 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Screwdriver D-130 – D-155

  HOZAN

  A shaft one size smaller than general screwdrivers is used, so it is optimal for screws in deep places often seen in home appliances.

  From: 69,356 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Screwdriver 6-Piece Set D-20

  HOZAN

  Highly versatile precision screwdriver set. [Features]· (+) No. 0 / (+) No. 1 / (-) 1.2 × 0.32 / (-) 1.8 × 0.32 / (-) 2.3 × 0.35 / (-) 3.0 × 0.45 set. · Stitched fabric case included [Applications]· Highly efficient rotating head type. Ideal for turning small screws quickly.

  From: 71,863 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver Set D-17

  HOZAN

  A long screwdriver that's convenient for adjustment inside equipment.[Features]· With a sewn case that is resistant to friction and pulling.· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.[Applications]· The 110 mm long shaft makes it ideal for adjusting parts in deep places.

  From: 1,497,822 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slotted screwdriver D-630 – D-655

  HOZAN

  [Features]· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.· Even when thin, "torsional strength" abides by JIS standards.· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.· The polypropylene grip with pen clip has both strength and lightness.· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.[Applications]· Convenient for tightening and loosening screws.

  From: 121,983 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-502

  HOZAN

  Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.[Features]· As the main body is compact, it is easy to see the work at hand.· Also, there is less load in continuous work as it is a light finish.· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.[Applications]· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.· A fixed-type collet, body-integral, compact single-head type.

  From: 276,066 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Adjustable Driver D-29-100

  HOZAN

  Adjustment driver that uses metal only at the tip to eliminate adjustment deviation.[Features]· Blade width: 2, blade thickness: 0.5, shaft length: 100 mm.· Material: Stainless steel (tip), cellulose acetate (shaft).[Applications]· Can also be used for tip models (surface-mount device type).

  From: 119,591 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Interchangeable Screwdrivers D-52, D-54, D-58

  HOZAN

  Screwdriver with interchangeable shaft.[Features]· The tip is a combination of Phillips and flathead shapes.· Tip size: D-52 +No. 00 / -2.5 X 0.4, D-54 +No. 1 / -4.0 X 0.55, D-58 +No. 2 / -5.5 X 0.9.

  From: 170,464 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable Screwdriver Set D-44

  HOZAN

  Screwdriver set with interchangeable shafts.[Features]· Bargain 3-piece set.· Chuck case included.

  From: 521,665 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Screwdriver D-66/D-67

  HOZAN

  A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.[Features]· Size that is easy to use even in narrow locations. For small screws that do not require force.· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.· The size and price allow placement where adjustment is necessary.[Applications]· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.

  From: 25,500 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stubby Screwdriver D-68/D-69

  HOZAN

  Screwdriver to be used for screws in narrow spaces.[Features]· Convenient for screws that are located in narrow places where ordinary screwdrivers cannot enter.· Compact design that allows work in narrow locations.· Handle shape that transfers force.· A spherical handle allows the screwdriver to be easily pressed against the screw by grasping the handle in the palm.[Applications]· The short overall length of 83 mm allows easy handling in narrow spaces. Exhibits great effect in narrow spaces.

  From: 149,156 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Nut Screwdriver D-840

  HOZAN

  A convenient nut driver (box driver) handy for quick turning of nuts and bolts.[Features]· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.· Black oxide processing forms an oxidation film during rustproofing treatment.[Applications]· Ideal for small nuts for hobby use.· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).

  From: 164,371 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-2B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 1.9 x 0.9, 1.95 / 2.0 / 2.6 / 2.65.

  From: 33,660 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Valve Driver D-13

  HOZAN

  A dedicated screwdriver convenient for attaching/detaching valve cores of American type valves (for tire tubes).[Features]· The handle is hexagonal which makes it easy to turn fast.· Handle diameter 10.0 mm φ.· Weight: 20 g.[Applications]· Attachment and removal of the valve core of American type valves (for tire tubes).

  From: 133,279 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Reamer K-441/K-442/K-443/K-444

  HOZAN

  A taper reamer that boasts outstanding sharpness and durability.[Features]· K-441, K-442, K-443 and K-444 are available.· Can be used in various applications according to the hole diameters and taper angles.· Perfect for work that requires application of torque as it comes with a handle.· Allows cutting by rotating clockwise.· Excellent sharpness and outstanding durability.[Applications]· Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.

  From: 283,385 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustable Screwdriver D-271/D-272/D-275

  HOZAN

  A long screwdriver that's convenient for adjustment inside equipment.[Features]· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.[Applications]· The 110 mm long shaft makes it ideal for adjusting parts in deep places.

  From: 497,286 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable Stubby Screwdriver D-59

  HOZAN

  Stubby screwdriver with interchangeable shaft.[Features]· The tip is a combination of Phillips and flathead shapes.[Applications]· The screwdriver cannot be used for purposes other than turning screws.· Cannot be used on live electrical equipment.

  From: 201,361 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable Ceramic Adjustable Screwdriver D-281

  HOZAN

  A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.[Features]· Uses zirconia ceramic that does not cause coil misalignment.· Has greater durability against wear and damage than alumina ceramics.* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.· Combination contents: D-281, Phillips No.0 (D-284), cross-shaped, blade width 1.7 mm (D-285).

  From: 805,173 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Impact Screwdriver D-963

  HOZAN

  Impact screwdriver with interchangeable left and right rotation. [Features]· Driver bit rotates at high torque when hit with a hammer, loosening rusted screws easily. · Protective grip with collar to protect the hand holding the driver. · A 12.7 mm square socket can be attached by removing the bit holder. · Case included [Applications]· Ideal for turning screws that are difficult to loosen.

  From: 107,511 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-4B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 2.3 X 0.4, 3.6 X 0.4 (with guide).

  From: 53,720 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-5

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size φ5.5 (I.D. 5.5 mm), φ8.0 (O.D. 8.0 mm).

  From: 25,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Core Screwdriver Set D-16

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· D-16 set includes: D-16-1B/D-16-2B/D-16-3B/D-16-4B/D-16-5.· Color D-16-1B to 4B Blue / D-16-5 White.· Weight 45 g.

  From: 192,748 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable Ceramic Adjustable Screwdriver D-280

  HOZAN

  · A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.[Features]· Uses zirconia ceramic that does not cause coil misalignment.· Has greater durability against wear and damage than alumina ceramics.* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.[Applications]· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).

  From: 1,427,790 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-1B

  HOZAN

  · Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.[Applications]· Tip sizes: 1.35 x 0.7, 1.4 x 0.8, 1.4, 1.5, 2.6, 2.7.

  From: 33,660 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-3B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 2.65 X 1, 3.1 X 1.2, 2.65, 3.1, 3.18 and 3.35.

  From: 48,048 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  LED Electrical Screwdriver D-745

  HOZAN

  An LED type inspection screwdriver with high visibility.[Features]· Batteries can be changed.· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.· Handle diameter 16 mm, weight 23 g.· Be sure to check the light before use.· Be careful of short circuit and electric shock.[Applications]· Used for determining AC polarity and checking electrical conductance.· Can be used within the applicable range.

  From: 252,491 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Neon Tube

  HOZAN

  Replacement part for D-74-L/D-75.[Features]·For D-74-L/D-75.

  From: 159,703 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Screwdriver

  HOZAN

  [Features] No. 2 Phillips screwdriver

  From: 114,980 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slotted Screwdriver

  HOZAN

  [Features] Blade width 4.0 mm straight slot screwdriver

  From: 114,980 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN
Product SeriesDòng sản phẩm	Electric Screwdriver D-331/D-332	Cross-Head Screwdriver Tip Size No. 00 to 2	Pin Vise K-501	Phillips Screwdriver D-130 – D-155	Precision Screwdriver 6-Piece Set D-20	Ceramic Adjustment Screwdriver Set D-17	Slotted screwdriver D-630 – D-655	Pin Vise K-502	Adjustable Driver D-29-100	Interchangeable Screwdrivers D-52, D-54, D-58	Interchangeable Screwdriver Set D-44	Micro Screwdriver D-66/D-67	Stubby Screwdriver D-68/D-69	Nut Screwdriver D-840	Core Screwdriver D-16-2B	Valve Driver D-13	Taper Reamer K-441/K-442/K-443/K-444	Ceramic Adjustable Screwdriver D-271/D-272/D-275	Interchangeable Stubby Screwdriver D-59	Interchangeable Ceramic Adjustable Screwdriver D-281	Impact Screwdriver D-963	Core Screwdriver D-16-4B	Core Screwdriver D-16-5	Core Screwdriver Set D-16	Interchangeable Ceramic Adjustable Screwdriver D-280	Core Screwdriver D-16-1B	Core Screwdriver D-16-3B	LED Electrical Screwdriver D-745	Neon Tube	Phillips Screwdriver	Slotted Screwdriver
From	253,555 VND-	129,599 VND-	526,976 VND	69,356 VND	71,863 VND-	1,497,822 VND	121,983 VND-	276,066 VND	119,591 VND	170,464 VND-	521,665 VND	25,500 VND-	149,156 VND-	164,371 VND-	33,660 VND	133,279 VND	283,385 VND-	497,286 VND-	201,361 VND	805,173 VND	107,511 VND-	53,720 VND	25,500 VND	192,748 VND	1,427,790 VND	33,660 VND	48,048 VND	252,491 VND	159,703 VND	114,980 VND	114,980 VND
Days to ShipSố ngày giao hàng	Same day	Same day or more	10 Day(s)	12 Day(s)	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day	Same day or more	10 Day(s)	Same day or more	9 Day(s)	Same day or more	9 Day(s)	9 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)
Tip standards	Phillips (+) / Flathead (-)	Phillips (+)	-	Phillips (+)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Flathead (-)	-	Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Box	Combination	-	Other	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Flathead (-)	Other	Combination	Flathead (-)	Combination	Combination	Flathead (-)	-	Phillips (+)	Flathead (-)
Tip size / Phillips (+)	No.2	No.00 / No.0 / No.1 / No.2	-	No.0	No.0 / No.1	No.0	-	-	-	No.00 / No.1 / No.2	No.00 / No.1 / No.2	No.00	No.2	-	-	-	-	No.0	No.2	No.0	No.2 / No.3 / No.4	-	-	-	-	-	-	-	-	No.2	-
Tip size / flathead (-) blade width (mm) B1	6	-	-	-	1.2 ～ 3	1.3 ～ 1.8	2.5 ～ 5.5	-	2	2.5 ～ 5.5	2.5 ～ 5.5	1.8	6	-	1.9	-	-	1.8	6	-	8 ～ 10	2.3 ～ 3.6	-	1.35 ～ 3.6	0.9 ～ 2.6	1.35 ～ 1.4	2.65 ～ 3.1	2.5	-	-	-
Shaft length L (mm)	100 ～ 150	75 ～ 300	-	100	-	110	75 ～ 100	-	100	57	57	23	35	100 ～ 125	-	25	-	110	17	-	36 ～ 80	-	-	-	-	-	-	17	-	-	-
Single Product/Set Classification	Single Item	Single Item	Single Item	Single Item	Single Item / Set Product	Set Product	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item / Set Product	Single Item	Single Item	Set Product	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item
Shaft type	Round	Round	-	Round	Round	Round	Round	-	Round	Round	Round	Round	Round	Round	-	Round	-	Round	Round	Round	Square	-	-	-	Round	-	-	Round	-	-	-
Magnet	Available	NA	-	NA	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	-	NA	-	NA	NA	NA	NA	-	-	-	NA	-	-	NA	-	-	-
Shaft through	NA	NA	-	NA	NA	NA	NA	-	NA	-	-	NA	NA	NA	-	-	-	NA	-	-	-	-	-	-	-	-	-	NA	-	-	-
Bolster	NA	NA	-	NA	NA	NA	NA	-	NA	-	-	NA	NA	NA	-	-	-	NA	-	-	-	-	-	-	-	-	-	NA	-	-	-
Grip Type	Rubber	Rubber	-	Rubber	Stainless Steel	Resin	Rubber	-	Resin	Rubber	Rubber	Resin	Rubber	Resin	Resin	Rubber	Stainless Steel	Resin	Rubber	Resin	Rubber	Resin	Resin	Resin	Resin	Resin	Resin	Resin	-	-	-
Tip size / flathead (-) blade thickness (mm) B2	1	-	-	-	0.32 ～ 0.45	0.4	0.35 ～ 0.8	-	0.5	0.4 ～ 0.9	0.4 ～ 0.9	0.3	0.9	-	0.9	-	-	0.4	0.8	-	-	0.4	-	0.4 ～ 1.2	0.4	0.7 ～ 0.8	1 ～ 1.2	0.6	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	4 ～ 10	1.95 ～ 2.65	-	-	-	-	-	-	-	-	1.95 ～ 3.35	-	2.6 ～ 2.7	2.65 ～ 3.35	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…