(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

ES-SXW33Y

Rail Length L type Block Type Rail Width W1 Assembly Height H Nominal Part Number Accuracy Standards No. of Blocks Surface Treatment Lubrication Type L Dimension Type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)
100

160

161

220

221

280

340

400

460

520

580

640

700

760

820

880

940

1000

1120

1240

1360

1480

1600

1720

1840

1960
ClearTrống
type
- ES-RX2R
- ES-RX2RL
- ES-RX2W
- ES-RX2WL
- ES-RX2WT
- ES-RX2WTL
- ES-RXR
- ES-RXRL
- ES-RXW
- ES-RXWL
- ES-RXWT
- ES-RXWTL
- ES-SX2R
- ES-SX2R-MX
- ES-SX2RJ
- ES-SX2RJ-MX
- ES-SX2RL
- ES-SX2RL-MX
- ES-SX2RLJ
- ES-SX2RLJ-MX
- ES-SX2W
- ES-SX2W-MX
- ES-SX2WL
- ES-SX2WL-MX
- ES-SX2WT
- ES-SX2WT-MX
- ES-SX2WTL
- ES-SX2WTL-MX
- ES-SXR
- ES-SXR-MX
- ES-SXRJ
- ES-SXRJ-MX
- ES-SXRL
- ES-SXRL-MX
- ES-SXRLJ
- ES-SXRLJ-MX
- ES-SXW
- ES-SXW-MX
- ES-SXWL
- ES-SXWL-MX
- ES-SXWT
- ES-SXWT-MX
- ES-SXWTL
- ES-SXWTL-MX
ClearTrống
Block Type
- Standard
  - Standard Block
- Wide
  - Wide Block
  - Wide Block Cross-Through Holes
  - Wide Block Tapped Hole
ClearTrống
Rail Width W1(mm)
15

20

23
ClearTrống
Assembly Height H(mm)
24

28

33
ClearTrống
Nominal Part Number
15

20

25
ClearTrống
Accuracy Standards
- Standard Grade
- High Grade
ClearTrống
No. of Blocks
- 1
- 2
ClearTrống
Surface Treatment
- Low Temperature Black Chrome Plating
- none
ClearTrống
Lubrication Type
- Filled with Lithium soap based grease
- Grease for food sector (H Type)
- Heat Resistant Grease (L Type)
- Low Dust Generation Grease (G Type)
- Low Dust Generation Grease (Y Type)
- Lubrication Unit
ClearTrống
L Dimension Type
- Configurable Type
- Selectable Type
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

4 Day(s) or Less

6 Day(s) or Less

8 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant] (ES-SXW33Y)

Name: ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant]
Brand: MISUMI
Availability: PreOrder

ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant] (ES-SXW33Y)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Previous PageTrang trước

Next PageTrang tiếp theo

Brand :

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

This Model is fully manufactured by MISUMI Group Factory in Vietnam.

Product Description

ES Linear Guides for Heavy Load

Medium LoadLinear GuidePrecision

[Specification]

- Configurable Rail Length by 1mm increments

- Anti-Rust Surface Treatment: "Low Temperature Black Chrome Plating" is Available

- Material: Carbon Steel

- Rail Length Min./Max. (mm.): 160 and 1960 / Assembly Height (mm.): 24, 28, 33

- Accuracy Standards: Normal / High

[Features]

- Manufactured by Saigon Precision Factory in Vietnam ( MISUMI Group ) with full Inspection

- RoHS Compliant

- Cost-Effective Solution with High Performance

VS MISUMI Standard

MISUMI Standard
MISUMI Original

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Type（Part No.）

Dimensional Drawing

Specification

Basic Rated Load / Others

Alterations

Accessories

Product Type（Part No.）

Material （Hardness） 1	Block Type	Rail Length Type 2	TypeA 3				MX Lubrication UnitB	Asemble Height(H) C	GreaseD 4
			Single Block		2 Blocks
			High	Normal	High	Normal
No Surface Treatment Carbon Steel ［SCM alloy Steel］（58HRC～）	Standard Block	Standard Length	ES-SXRJ	ES-SXR	ES-SX2RJ	ES-SX2R	Blank ： none -MX ： Provided	24 28 33	Blank ： Standard G ： G Grease L ： L Grease Y ： Y Grease H ： H Grease
	Standard Block	1mm Increment （Specified）	ES-SXRLJ	ES-SXRL	ES-SX2RLJ	ES-SX2RL
	Wide Block Through Hole	Standard Length	-	ES-SXW	-	ES-SX2W
	Wide Block Through Hole	1mm Increment （Specified）	-	ES-SXWL	-	ES-SX2WL
	Wide Block Tapped Hole	Standard Length	-	ES-SXWT	-	ES-SX2WT
	Wide Block Tapped Hole	1mm Increment （Specified）	-	ES-SXWTL	-	ES-SX2WTL
Low Temperature Black Chrome Plating Carbon Steel ［SCM alloy Steel］（58HRC～）	Standard Block	Standard Length	-	ES-RXR	-	ES-RX2R	none	24 28 33	Blank ： Standard G ： G Grease L ： L Grease Y ： Y Grease H ： H Grease
	Standard Block	1mm Increment （Specified）	-	ES-RXRL	-	ES-RX2RL
	Wide Block Through Hole	Standard Length	-	ES-RXW	-	ES-RX2W
	Wide Block Through Hole	1mm Increment （Specified）	-	ES-RXWL	-	ES-RX2WL
	Wide Block Tapped Hole	Standard Length	-	ES-RXWT	-	ES-RX2WT
	Wide Block Tapped Hole	1mm Increment （Specified）	-	ES-RXWTL	-	ES-RX2WTL

1Materials of each part can be checked here>> Misumi linear guide product information

2Standard Length of selectable length type (Fixed Length) can be checked "Standard Length (Fixed Length) List or here to refer
If the require rail length is not available in the selectable length type, please select the 1mm specification (specified size).

33 blocks and 4 blocks option is available. Please compete part no. of single block type, then andd [-B3] or [-B4] as alteration.

If you request more than5 blocks, please see details here.>>Click

4For detail on varios types of grease, see details here>>Click *MX（Lubrication Unit）Type: standard Lithium grease filled and no other choice.

[ ! ]Operating Temperature for this prodcut is −20〜80℃

[ ! ]About Low Temperature Black Chrome Plating, see more details here>>click

[NG] Blocks or Rails are can't be purchased individually (sold as SET items)

Part No. example

Type	Height H	Grease	-	Rail Length L	-	Alterations
A B	C	D
ES-SXR	24		-	940			（ES-SXR24-940）
ES-SX2RL-MX	24		-	942	-	WC	（ES-SX2RL-MX24-942-WC）
ES-RXWTL	24	Y	-	938	-	TMS-B3	（ES-RXWTL24Y-938-TMS-B3）

Dimensional Drawing

Standard Block Wide Block ■Dimension of MX(Lubrication Unit)Attached 重荷重用リニアガイド普通すきま:関連画像

[ ! ]Dimension "G" of L specified Type is not same as the value on the table below. Please refere to the chart.
[ ! ]Dimensional Tolerance refers to JIS B 0405 Middle Class expect "H" and "W_2"
[NG] Block and Rail can't be purchased individually(sold as set items)

■H・W₂ Dimensional Accuracy

Product Category		Specifications	Assemblle Height H (mm)	Precision Grade (μm)
Product Category		Specifications	Assemblle Height H (mm)	High	Normal
Medium・Heavy Load Linear Guide	Normal Clearance	Height H Tolerance	24～33	±40	±100
		Pair Variation of Height H		15	20
		Width W₂Tolerance		±20	±100
		Pair Variation of Width W₂	24・28	15	20
		Pair Variation of Width W₂	33	15	30

［！］Dimensional Accuracy and Preload(Clearance), see >>Click.

■Other Dimensional Tolerance

Length Range		Tolerance （mm）
Over	less	Tolerance （mm）
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8
1000	2000	±1.2

JIS B 0405-1991 Grade m(medium) Compliant

Specification

Block	H	L 5	Block Dimension														Rail Dimension
			W	L₁		B	C	S×ℓ6		L₂	K	T	Cb	Grease Nipple			H₁	W₁	W₂	Ca	Counterbored	F	G 7
			W	Standard	With MX	B	C	Tapped Hole	Through Hole	L₂	K	T	Cb	Mounting Hole	E	T₁	H₁	W₁	W₂	Ca	d₁×d₂×h	F	G 7
Standard Block	24	100～1480 (160)	34	57	66.6	26	26	M4×7	―	41	20	7	0.85	M5×P0.8	6	5	12.5	15	9.5	0.5	3.5×6×4.5	60	20
	28	160～1960 (220)	42	67	76.6	32	32	M5×8	―	47.6	22.5	7.5	1.0	M6×P0.75	13	6	15.5	20	11	0.6	6×9.5×8.5	60	20
	33	160～1960 (220)	48	83	92.6	35	35	M6×9	―	61	26.5	8	1.0	M6×P0.75	13	6.8	18	23	12.5	0.8	7×11×9	60	20
Wide Block	24	100～1480 (160)	52	57	66.6	41	26	M5 (Through)	φ4.5 (Through)	41	20	7	0.5	M5×P0.8	6	5	12.5	15	18.5	0.5	3.5×6×4.5	60	20
	28	160～1960 (220)	59	67	76.6	49	32	M6 (Through)	φ5.5 (Through)	47.6	22.5	9	1.0	M6×P0.75	13	6	15.5	20	19.5	0.6	6×9.5×8.5	60	20
	33	160～1960 (220)	73	83	92.6	60	35	M8 (Through)	φ7 (Through)	61	26.5	10	1.0	M6×P0.75	13	6.8	18	23	25	0.8	7×11×9	60	20

5( )Dimension is the shortest Length for 2 blocks type

6Wide Blocks have 2 choice of Tapped Holes and Through Holes and the depth of the hole is through type.

7Length Specified type are cut evenly on both side(left and right). In this case, G dimesnion will be different from the value in chart above. Calculation method: see below.>>click

[ ! ]High Precision Grade can't be selected with the length below(Normal Grade only).H24:L=1001mm～1480mm
H24:L=1001mm～1480mm
H28 and H33: L＝1241mm～1960mm

[ ! ]Grease Nipple：H24 has Straight Nipple, H28 has side fowarded Nipple

[ ! ]Grease Nipple posiion can be changed, since it is screw-in type.

[ ! ]Hex Socket Cap Screw>>Click

[ ! ]Correctly align the datum planes (the sides with the straight grooves) of both the rail and block when installation. For details, see "Installation and handling" below.

[NG] Block and Rail can't be purchased individually(sold as set items)

Standard Length (Fixed Length) List

The table below shows the list of selctable length.
Length which you can not find here is also available as "configurable length type" specified with 1mm increments.

Height ( H )	Rail Length ( L )
24	(100)	160	220	280	340	400	460	520	580	640	700	760	820	880	940	1000	1120	1240	1360	1480
28	(160)	220	280	340	400	460	520	580	640	700	760	820	880	940	1000	1120	1240	1360	1480	1600	1720	1840	1960
33	(160)	220	280	340	400	460	520	580	640	700	760	820	880	940	1000	1120	1240	1360	1480	1600	1720	1840	1960

[ ! ]( ) this length is availalbe with single blocks type only.

[ ! ]Maximum Length of Low Temp Black Chrome Plating Type is L 1,000mm.

Basic Rated Load / Allowalbe Static Moment / Mass

kgf=N×0.101972

Height(H)	Basic Rated Load8		Static Allowable Moment						Mass
	C（Dynamic） kN	Co（Static） kN	Single Block Used			2 Blocks Used in close contact9			Block		Guide Rail kg/m
	C（Dynamic） kN	Co（Static） kN	M_A N・m	M_B N・m	M_C N・m	M_A N・m	M_B N・m	M_C N・m	Standard kg	Wide kg	Guide Rail kg/m
24	7.74	14.2	69.0	69.0	98.0	184.5	184.5	196.0	0.20	0.25	1.5
28	11.25	21.3	155.0	155.0	232.0	390.2	390.2	464.0	0.30	0.35	2.4
33	18.18	34.5	275.0	275.0	393.0	873.5	873.5	786	0.45	0.60	3.4

8The basic rated load is the same for the four directions that act on the block (radial direction, reverse radial direction, and lateral direction). It can be used in any position.

9The static allowable moment when two blocks are in close contact is a reference value, not a guaranteed value.

The allowable load and moment of the linear guide are determined by dividing each value (table above) by the static safety factor fs (table below).For details>>Click
ex）Under nomal operating condition: Allowalble load for H24 Type（kN）⇒ 14.2/2＝7.1 （apploximately 725kg）

Static Safety Factor(fs lower limit)

Condition	fs lower limit
For nomal operating condtion	1～2
When smooth running performance is required	2～4
When variatoin and impact exist	3～5

Allowable load (N)≦ Co/fs
Allowable Moment (N・m)≦ (M_A,M_B,M_C)/fs

fs:Static Safety Factor　Co:Basic Static Rated Load
M_A,M_B,M_C:Allowable Static Moment(N・m)

Installation and Handling

■Datum Side and Mounting Direction

Datum side has Datum Plane Mark(Groove), see Figure Ａ. Blocks and Rails must have the same datum side when use.
Various Mounting Direction is availalbe having the same Basic Rated Load, see Figure B
Tapped Hole or Through Hole can be selected with Wide Block Type, see Figure C

Wide Block Tapped Hole

Wide Block Through Hole

■Precaution of use

Although the retaining wire prevents the balls from falling off, care must be taken when attaching and detaching the block. Click here for details>>click
If the block and rail are not used in original combination, radial clearance and accuracy cannot be guaranteed.
It is not possible to extend the length by adding rails on the same axis.This is because the assembly accuracy between the two cut surfaces is not guaranteed.
Dimensional Accurarcy of Linear Guides is guranteed after fixation of the rail (Screw Mounting and pushed to the datum side）.
The rail bends before are forced by fixation. so there is no probelm in using it.

■About Grease

When shipping ES Linear Guides, Lithium Soaped based Grease（Alvania Grease S2 by Showa Shell Sekiyu） is filled.
Other Brand's Grease is not reccomended to be filled. Please adopt the same brand&s grease for maintenance.
Grease Nipple：H24 has Straight Nipple, H28 and H33 has side fowarded Nipple
Gease Nipple posiion can be changed, since it is screw-in type.

■Standard Grease Nipple Position

When the datum side is facing you, the grease nipple will be attached in the direction shown in the diagram below.

■Lubricatoin Unit "MX"

Advantages of Lubrication Unit "MX"
Buit-in porous core part impregnated with oil.
Achieves long-term maintenance-free operation.
Reduce maintenance costs.
Ideal for locations where lubrication is not possible due to design.
See more detail>>Click

■Others

Lifetime calculation>>Click

Alterations

Code

Alterations

Specification

Precaution

TMS
TMC

TMS：Tapped Hole machining+fallout prevention Plate
TMC：Tapped Hole machining

・Tapped Hole machined on both sides to install fallout prevension plates.

・M3×P0.5 Depth 5mm
・2pcs of Fallout prevension Plate attached
・For more detaile abou Fallout prevention Plate>>Click

LLC
RLC

LLC：Left End Cut
RLC：Right End Cut

・Cut Rail End
・Rail is cut with the prodcut ID facing side( datum on other side)
・Please see cut length of each size below.

H	Cut L	N
24	10	10
28
33

[ ! ]Overall length wll be shorter by cutting.
ex）ES-SXR24-880-LLC: has L 870mmになります。
[ ! ]Applicable to Standard Length type only.
[ ! ]Not applicable to L100 of H24.

Parallel Use of 2 Rails

・Please specify when using two axes in parallel.
・Pair variation of Height H between 2 Rails is set within 20µm
・Rails are shipped in pairs

[ ! ]Speciify the actual rail quantity(even number) to order.
in the case of the order an odd number, it will be treated as an error.
[ ! ]Not applicable to High Grade Type
[ ! ]Not applicable to Low Temp Black Chrome Plating Type

B3
B4

B3：add blocks（total 3pcs）
B4：add blocks（total 4pcs）

3 blocks specification

4 blocks specification

・Shipped as 3 blocks (4 blocks) to single block type.
・There are limits of rail length L
See "selectable shortest rail length" for details.

[ ! ]Single block part no need to be selected for this opiton and the case below is NG example( 2blocks type is selected)
（NG: ES-SX2R24-880-B4）
[ ! ]Not applicable to High Grade Type

Accessories

Block Shape	Height (H)	Linear Guide Clamper		Rail Cap	Linear Guide Height Adjustment Block ＜Economy Type＞		Linear Guide Height Adjustment Block ＜Precision Type＞
		Knob Type	Lever Type		General Structural Steel	Aluminum Alloy	S45C Equivalent		Aluminum Alloy
					Free Side		Datum Side	Free Side	Datum Side	Free Side
					L Selectable	L Specified	L Selectable	L Specified	L Selectable	L Specified

Standard Wide	24	SVCN24	SVCK24	PACK-SGLC3	LGBE24	ALGBE24	BETA24	BETE24	ABETA24	ABETE24
	28	SVCN28	SVCK28	PACK-SGLC5	LGBE28	ALGBE28	BETA28	BETE28	ABETA28	ABETE28
	33	SVCN33	SVCK33	PACK-SGLC6	LGBE33	ALGBE33	BETA33	BETE33	ABETA33	ABETE33

■Accessories

Description	Clamping	Height Adjustment	Block fallout Prevention	Rail Push Plate	Linear Lock	Linear Guide Lock	Block fallout Prevention	Rail Cap
Representative Type	SVCN	BETA	SBLT	SGU	LLT	LLTG	SVP	PACK-SGLC
Image

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
ES-SXW33Y

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Block Type	Rail Width W1 (mm)	Assembly Height H (mm)	Nominal Part Number	Accuracy Standards	No. of Blocks	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	Surface Treatment	Lubrication Type	L Dimension Type	Material-Grease Nipple
	-	1 Piece(s)		8 Day(s)	-	[Wide] Wide Block Cross-Through Holes	23	33	25	Standard Grade	1	18180	34500	275	275	393	none	Low Dust Generation Grease (Y Type)	Selectable Type	Electroless Nickel Plating

Loading...Tải…

G Dimension

[G] Dimension of Length Specifified Type requires calculation.
Please refer to the below table and formula.
*[G] Dimension of Fixed Length: Please refer to the specification table. (no calculation required)

■ ES Linear Guide -Rail Dimension-

Assemble Height H	24	28	33	# of Mounting Holes M
Rail Length L	100～131	100～139	100～141	2
	132～191	140～199	142～201	3
	192～251	200～259	202～261	4
	252～311	260～319	262～321	5
	312～371	320～379	322～381	6
	372～431	380～439	382～441	7
	432～491	440～499	442～501	8
	492～551	500～559	502～561	9
	552～611	560～619	562～621	10
	612～671	620～679	622～681	11
	672～731	680～739	682～741	12
	732～791	740～799	742～801	13
	792～851	800～859	802～861	14
	852～911	860～919	862～921	15
	912～971	920～979	922～981	16
	972～1031	980～1039	982～1041	17
	1032～1091	1040～1099	1042～1101	18
	1092～1151	1100～1159	1102～1161	19
	1152～1211	1160～1219	1162～1221	20
	1212～1271	1220～1279	1222～1281	21
	1272～1331	1280～1339	1282～1341	22
	1332～1391	1340～1399	1342～1401	23
	1392～1451	1400～1459	1402～1461	24
	1452～1511	1460～1519	1462～1521	25
	1512～1571	1520～1579	1522～1581	26
	1572～1631	1580～1639	1582～1641	27
	1632～1691	1640～1699	1642～1701	28
	1692～1751	1700～1759	1702～1761	29
	1752～1811	1760～1819	1762～1821	30
	1812～1871	1820～1879	1822～1881	31
	1872～1931	1880～1939	1882～1941	32
	1932～1960	1940～1960	1942～1960	33
F Pitch of Mounting Hole	60	60	60

Grease Option

Type	Grease	Feature
Standard	Alvania S2 (Made by Shell）	An industrial all-purpose grease suitable for a variety of grease lubrication locations.

Y	AFF （Made by THK）	A grease with low dust generation, stable rolling resistance, and excellent fretting resistance.
G	LG2 （Made by NSK）	A grease that generates little dust and has excellent wear resistance and rust prevention properties. (Special grease for linear guides, ball screws and etc. for clean-room use)

L	ET-100K （Made by Kyodo Yushi）	Excels in heat resistance, oxidation stability, adhesion and adhesive power. In addition, splash or leakage is little

H	FGL（Lubriplate®）	Suitable for lubrication of processing and filling equipment for food, beverages, and pharmaceuticals.(NSF H-1 registration NO.043534)

Basic InformationThông tin cơ bản

Rail Type	Standard Rail	Set / Single Item	Set	Preload	Normal Clearance
Material	Carbon Steel	Ball Arrangement	Medium, Heavy Load Type	Retainer	N/A
Lubrication Type	Lubrication Applied	Rolling Element	Ball	Block Material	Carbon Steel
Material-Ball	Carbon Steel	Material-Return Cap	POM	Material-Side Seal	Stainless Steel+Nitril Rubber(NBR)
Material-Under Seal	Nitril Rubber(NBR)	Material-Under Retainer	Stainless Steel	Material-Upper Retainer	Stainless Steel
Material-Middle Retainer	Stainless Steel

Please check the type/dimensions/specifications of the part ES-SXW33Y in the ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần ES-SXW33Y trong chuỗi ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant].

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Products like this...

Part Number
ES-RX2RL33Y
ES-RX2W28H
ES-RX2WL24H
ES-SXWL24Y
ES-SXWL28Y
ES-SXWL33Y

Standard Unit Price	Minimum order quantity	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Block Type	Rail Width W1 (mm)	Assembly Height H (mm)	Nominal Part Number	Accuracy Standards	No. of Blocks	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	Surface Treatment	Lubrication Type	L Dimension Type	Material-Grease Nipple
-	1 Piece(s)	8 Day(s)	-	[Standard] Standard Block	23	33	25	Standard Grade	2	18180	34500	275	275	393	Low Temperature Black Chrome Plating	Low Dust Generation Grease (Y Type)	Configurable Type	-
-	1 Piece(s)	11 Day(s)	-	[Wide] Wide Block Cross-Through Holes	20	28	20	Standard Grade	1	11250	21300	155	155	232	Low Temperature Black Chrome Plating	Grease for food sector (H Type)	Selectable Type	-
-	1 Piece(s)	11 Day(s)	-	[Wide] Wide Block Cross-Through Holes	15	24	15	Standard Grade	1	7740	14200	69	69	98	Low Temperature Black Chrome Plating	Grease for food sector (H Type)	Configurable Type	-
-	1 Piece(s)	8 Day(s)	-	[Wide] Wide Block	15	24	15	Standard Grade	1	7740	14200	69	69	98	none	Low Dust Generation Grease (Y Type)	Configurable Type	Electroless Nickel Plating
-	1 Piece(s)	8 Day(s)	-	[Wide] Wide Block	20	28	20	Standard Grade	1	11250	21300	155	155	232	none	Low Dust Generation Grease (Y Type)	Configurable Type	Electroless Nickel Plating
-	1 Piece(s)	8 Day(s)	-	[Wide] Wide Block	23	33	25	Standard Grade	1	18180	34500	275	275	393	none	Low Dust Generation Grease (Y Type)	Configurable Type	Electroless Nickel Plating

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)

type

Block Type

Rail Width W1(mm)

Assembly Height H(mm)

Nominal Part Number

Accuracy Standards

No. of Blocks

Surface Treatment

Lubrication Type

L Dimension Type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

ES Linear Guides for Heavy Load (Normal Clearance) [RoHS Compliant] (ES-SXW33Y)

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

ES Linear Guides for Heavy Load

Product Type（Part No.）

Dimensional Drawing

Specification

Basic Rated Load / Allowalbe Static Moment / Mass

Alterations

Accessories

Part Number

G Dimension

Basic InformationThông tin cơ bản

Products like this...

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng