(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
RoHS Compliant Product
D Tolerance | Equivalent Material | Hardness | Surface Treatment | |
g7 | GB:45 JIS:S45C | 55HRC~ | High Frequency Quenched For effective hardening layer depth, click Surface Hardness Benchmark | Hard Chrome Plated Plating hardness: HV750~ Plating thickness: 3μ or more |
Shaft Dia. D (φ) | Tolerance g7 | Length L 1mm increments | C |
6 | -0.004 -0.016 | 20~ 600 | Below 0.5 |
8 | -0.005 -0.020 | 20~ 800 | |
10 | |||
12 | -0.006 -0.024 | 20~1000 | |
13 | 25~1000 | ||
16 | 30~1200 | ||
20 | -0.007 -0.028 | Below 1.0 | |
25 | 35~1200 | ||
30 | 35~1500 |
Shaft Dia. (more than) | Shaft Dia. (to) | Standard product g6 | Economy series g7 | Medium precision h8 |
2 | 5 | 0.004 | - | - |
5 | 10 | 0.004 | 0.012 | 0.012 |
10 | 13 | 0.004 | 0.012 | 0.012 |
13 | 18 | 0.005 | 0.016 | 0.016 |
18 | 20 | 0.005 | 0.016 | 0.016 |
20 | 40 | 0.006 | 0.020 | 0.020 |
40 | 50 | 0.007 | - | - |
Shaft Dia. | Total Length | Standard product g6 | Economy series g7 | Medium precision h8 |
3·4 | ≤100 | (L/100)×0.05 or Less | - | - |
>100 | ||||
5 | ≤100 | (L/100)×0.03 or Less | ||
>100 | ||||
6~50 | ≤100 | Below 0.01 | Below 0.025 | Below 0.025 |
>100 | (L/100)×0.01 or Less | (L/100)×0.025 or Less | (L/100)×0.025 or Less |
Dimension (more than) | Dimension (to) | Standard product g6 | Economy series g7 | Medium precision h8 |
2 | 6 | ±0.1 | ||
6 | 30 | ±0.2 | ||
30 | 120 | ±0.3 | ||
120 | 400 | ±0.5 | ||
400 | 1000 | ±0.8 | ||
1000 | 1500 | ±1.2 |
Part Number |
---|
E-PSFJ3-[25-400/1] |
E-PSFJ4-[25-400/1] |
E-PSFJ5-[25-400/1] |
E-PSFJ6-[20-600/1] |
E-PSFJ8-[20-800/1] |
E-PSFJ10-[20-800/1] |
E-PSFJ12-[20-1000/1] |
E-PSFJ13-[25-1000/1] |
E-PSFJ15-[30-1200/1] |
E-PSFJ16-[30-1200/1] |
E-PSFJ20-[30-1200/1] |
E-PSFJ25-[35-1200/1] |
E-PSFJ30-[35-1500/1] |
E-PSFJ35-[35-1500/1] |
E-PSFJ40-[40-1500/1] |
E-PSFJ50-[50-1500/1] |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Shaft Dia. D (Ø) | Length L (mm) |
---|---|---|---|---|---|---|
- | 2 Piece(s) | 10 Day(s) | 3 | 25 ~ 400 | ||
- | 2 Piece(s) | 10 Day(s) | 4 | 25 ~ 400 | ||
- | 2 Piece(s) | 10 Day(s) | 5 | 25 ~ 400 | ||
- | 1 Piece(s) | 5 Day(s) | 6 | 20 ~ 600 | ||
- | 1 Piece(s) | 5 Day(s) | 8 | 20 ~ 800 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | 20 ~ 800 | ||
- | 1 Piece(s) | 5 Day(s) | 12 | 20 ~ 1000 | ||
- | 2 Piece(s) | 5 Day(s) | 13 | 25 ~ 1000 | ||
- | 2 Piece(s) | 10 Day(s) | 15 | 30 ~ 1200 | ||
- | 1 Piece(s) | 5 Day(s) | 16 | 30 ~ 1200 | ||
- | 1 Piece(s) | 5 Day(s) | 20 | 30 ~ 1200 | ||
- | 2 Piece(s) | 5 Day(s) | 25 | 35 ~ 1200 | ||
- | 2 Piece(s) | 5 Day(s) | 30 | 35 ~ 1500 | ||
- | 2 Piece(s) | 10 Day(s) | 35 | 35 ~ 1500 | ||
- | 2 Piece(s) | 10 Day(s) | 40 | 40 ~ 1500 | ||
- | 2 Piece(s) | 10 Day(s) | 50 | 50 ~ 1500 |
Loading...Tải…
D Tolerance | Equivalent Material | Hardness | Surface Treatment | D (mm) | L (mm) | |
g7 | GB:45 JIS:S45C | 55HRC~ | High Frequency Quenched For effective hardening layer depth, click Surface Hardness Benchmark | Hard Chrome Plated Plating hardness: HV750~ Plating thickness: 3μ or more | 6~30 | 20~1500 |
Example of Use | Medium Precision | High Precision |
Economy series g7 | g6 standard type/g6 precision type | |
Recommended Applications | - Medium precision application - Light load - Use in vertical direction and suitable for light load - Short sliding distance - Low frequency - Low speed - Low-price design | - High precision application (Outer diameter-Straightness-Roundness) - Heavy load - High-durability application - Use in horizontal direction and suitable for heavy load - Long sliding distance - High frequency - High speed |
View of Shaft Cut Section | ①Surface hardness confirmation The standard for hardening layer depth of the quenched guide shaft varies with O.D. dimension and tolerance. Refer to the table below for details:
| |||||||||||||||||||||||
·The hardness of the processed part is reduced after the base metal is annealed. In the following examples (processed part and its front and rear positions), the hardness may decrease due to the annealing effect of processing. The parts that may be reduced in hardness due to annealing are: ·Female thread: when M≥D/2 ·Wrench slot alteration (SC·WSC·SX) ·Plane alteration (FC·WFC) | ||||||||||||||||||||||||
·Plating of surface treatment Machining is performed after surface treatment of base metal. In the example on the right,//// only part D is hard chrome plated. No electroplating treatment is applied to the following parts. ·Groove part ·Female thread part ·Wrench slot, plane, cut section |
Linear Bushing Standard Type Straight Type | Bearings With Housings T-Shaped | Shaft Collars (Clamp) | ||
Typical Model: LMU6 | Typical Model: BGHFS6000ZZ-30 | Typical Model: PSCS10-10 | ||
Advantages: High quality, affordable price, short delivery time | Advantages: Full range, high precision and quality | Advantages: Matching shaft products, full range |
Medical | Semiconductor | Electronic & Electrical | ||
Smart Phones | Food | Automotive | ||
Basic Shape | Solid | End Shape (Left) | No Machining | End Shape (Right) | No Machining |
---|---|---|---|---|---|
Shaft End Perpendicularity | Perpendicularity (0.2) | Material | S45C | Heat Treatment | Induction Hardened |
Surface Treatment | Hard Chrome Plating | Shaft Fit Tolerance | g7 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy