(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(971 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8,10]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Change Tapped Thread N to Fine One [NSC] Change Thread M to Fine One [MMC] Change Thread M to Fine One [MMS] F Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] Threaded (Coarse) [M] type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
ClearTrống
Heat Treatment
- Not Provided
- Induction Hardened
ClearTrống
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
ClearTrống
Length L(mm)
[25-1495/1mm Unit(s)]
ClearTrống
Shaft Fit Tolerance
f8

g6

h5
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
ClearTrống
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
ClearTrống
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30
ClearTrống
Change Thread M to Fine One [MMS](mm)
10

12

14

18
ClearTrống
F(mm)
[5-90/1mm Unit(s)]
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
ClearTrống
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
ClearTrống
type
- PSAFD
- PSAGD
- PSFDU
- PSSAFD
- PSSAGD
- PSSFDU
- RSAFD
- SAFD
- SFDU
- SSAFD
- SSFDU
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

3 Day(s) or Less

6 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut (Part Number)

Name: Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8,10]

SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-NSC[8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-N[4,5,6,8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-ND[6,8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-NSC[8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-N[4,5,6,8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-ND[6,8,10]

SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-NSC[8,10]

SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-N[4,5,6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-ND[6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-NSC[8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-N[4,5,6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-ND[6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-NSC[8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-N[4,5,6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-ND[6,8,10,12]

SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-NSC[8,10,12]

SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-N[4,5,6,8,10,12]

SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-ND[6,8,10,12]

SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-NSC[8,10,12,14]

SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8,10]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] One end male thread, one end female thread, shaft with relief groove (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8,10]
SFDU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-NSC[8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-N[4,5,6,8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-ND[6,8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-NSC[8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-N[4,5,6,8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-ND[6,8,10]
SFDU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-NSC[8,10]
SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-N[4,5,6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-ND[6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-NSC[8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-N[4,5,6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-ND[6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-NSC[8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-N[4,5,6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-ND[6,8,10,12]
SFDU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-NSC[8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-N[4,5,6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-ND[6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-NSC[8,10,12,14]
SFDU20-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-N[4,5,6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-ND[6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-NSC[8,10,12,14]
SFDU20-[25-1395/1]-F[5-48/1]-MMS[10,12,14,18]-N[4,5,6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-MMS[10,12,14,18]-ND[6,8,10,12]
SFDU20-[25-1395/1]-F[5-48/1]-MMS[10,12,14,18]-NSC[8,10,12,14]
SFDU25-[25-1395/1]-F[7-72/1]-M[6,8,10,12,16,20,24]-N[4,5,6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-M[6,8,10,12,16,20,24]-ND[6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-M[6,8,10,12,16,20,24]-NSC[8,10,12,14,18]
SFDU25-[25-1395/1]-F[7-72/1]-MMC[8,10,12,15,17,20]-N[4,5,6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-MMC[8,10,12,15,17,20]-ND[6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-MMC[8,10,12,15,17,20]-NSC[8,10,12,14,18]
SFDU25-[25-1395/1]-F[7-72/1]-MMS[10,12,14,18]-N[4,5,6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-MMS[10,12,14,18]-ND[6,8,10,12,16]
SFDU25-[25-1395/1]-F[7-72/1]-MMS[10,12,14,18]-NSC[8,10,12,14,18]
SFDU30-[25-1495/1]-F[7-72/1]-M[8,10,12,16,20,24]-N[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-M[8,10,12,16,20,24]-ND[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-M[8,10,12,16,20,24]-NSC[8,10,12,14,18]
SFDU30-[25-1495/1]-F[7-72/1]-MMC[8,10,12,15,17,20,25]-N[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-MMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-MMC[8,10,12,15,17,20,25]-NSC[8,10,12,14,18]
SFDU30-[25-1495/1]-F[7-72/1]-MMS[10,12,14,18]-N[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-MMS[10,12,14,18]-ND[6,8,10,12,16,20]
SFDU30-[25-1495/1]-F[7-72/1]-MMS[10,12,14,18]-NSC[8,10,12,14,18]
SFDU35-[25-1492/1]-F[8-90/1]-M[10,12,16,20,24,30]-N[8,10,12,16,20,24]
SFDU35-[25-1492/1]-F[8-90/1]-M[10,12,16,20,24,30]-NSC[8,10,12,14,18]
SFDU35-[25-1492/1]-F[8-90/1]-MMC[10,12,15,17,20,25,30]-N[8,10,12,16,20,24]
SFDU35-[25-1492/1]-F[8-90/1]-MMC[10,12,15,17,20,25,30]-NSC[8,10,12,14,18]
SFDU35-[25-1492/1]-F[8-90/1]-MMS[10,12,14,18]-N[8,10,12,16,20,24]
SFDU35-[25-1492/1]-F[8-90/1]-MMS[10,12,14,18]-NSC[8,10,12,14,18]
SFDU40-[40-1490/1]-F[10-90/1]-M[12,16,20,24,30]-N[10,12,16,20,24,30]
SFDU40-[40-1490/1]-F[10-90/1]-M[12,16,20,24,30]-NSC[10,12,14,18]
SFDU40-[40-1490/1]-F[10-90/1]-MMC[12,15,17,20,25,30]-N[10,12,16,20,24,30]
SFDU40-[40-1490/1]-F[10-90/1]-MMC[12,15,17,20,25,30]-NSC[10,12,14,18]
SFDU40-[40-1490/1]-F[10-90/1]-MMS[12,14,18]-N[10,12,16,20,24,30]
SFDU40-[40-1490/1]-F[10-90/1]-MMS[12,14,18]-NSC[10,12,14,18]
SFDU50-[50-1490/1]-F[10-90/1]-M[16,20,24,30]-N[12,16,20,24,30]
SFDU50-[50-1490/1]-F[10-90/1]-M[16,20,24,30]-NSC[12,14,18]
SFDU50-[50-1490/1]-F[10-90/1]-MMC[15,17,20,25,30]-N[12,16,20,24,30]
SFDU50-[50-1490/1]-F[10-90/1]-MMC[15,17,20,25,30]-NSC[12,14,18]
SFDU50-[50-1490/1]-F[10-90/1]-MMS[14,18]-N[12,16,20,24,30]
SFDU50-[50-1490/1]-F[10-90/1]-MMS[14,18]-NSC[12,14,18]
SSAFD8-[25-795/1]-F[5-18/1]-M6-N[3,4,5]
SSAFD8-[25-795/1]-F[5-18/1]-MMC6-N[3,4,5]
SSAFD10-[25-795/1]-F[5-24/1]-M[6,8]-N[3,4,5,6]
SSAFD10-[25-795/1]-F[5-24/1]-M[6,8]-ND6
SSAFD10-[25-795/1]-F[5-24/1]-MMC[6,8]-N[3,4,5,6]
SSAFD10-[25-795/1]-F[5-24/1]-MMC[6,8]-ND6
SSAFD12-[25-995/1]-F[5-30/1]-M[6,8,10]-N[4,5,6,8]
SSAFD12-[25-995/1]-F[5-30/1]-M[6,8,10]-ND[6,8]
SSAFD12-[25-995/1]-F[5-30/1]-M[6,8,10]-NSC8
SSAFD12-[25-995/1]-F[5-30/1]-MMC[6,8,10]-N[4,5,6,8]
SSAFD12-[25-995/1]-F[5-30/1]-MMC[6,8,10]-ND[6,8]
SSAFD12-[25-995/1]-F[5-30/1]-MMC[6,8,10]-NSC8
SSAFD12-[25-995/1]-F[5-30/1]-MMS10-N[4,5,6,8]
SSAFD12-[25-995/1]-F[5-30/1]-MMS10-ND[6,8]
SSAFD12-[25-995/1]-F[5-30/1]-MMS10-NSC8
SSAFD13-[25-995/1]-F[5-36/1]-M[6,8,10,12]-N[4,5,6,8]
SSAFD13-[25-995/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8]
SSAFD13-[25-995/1]-F[5-36/1]-M[6,8,10,12]-NSC8
SSAFD13-[25-995/1]-F[5-36/1]-MMC[6,8,10]-N[4,5,6,8]
SSAFD13-[25-995/1]-F[5-36/1]-MMC[6,8,10]-ND[6,8]
SSAFD13-[25-995/1]-F[5-36/1]-MMC[6,8,10]-NSC8
SSAFD13-[25-995/1]-F[5-36/1]-MMS10-N[4,5,6,8]
SSAFD13-[25-995/1]-F[5-36/1]-MMS10-ND[6,8]
SSAFD13-[25-995/1]-F[5-36/1]-MMS10-NSC8
SSAFD15-[25-995/1]-F[5-36/1]-M[6,8,10,12]-N[4,5,6,8,10]
SSAFD15-[25-995/1]-F[5-36/1]-M[6,8,10,12]-ND[6,8,10]
SSAFD15-[25-995/1]-F[5-36/1]-M[6,8,10,12]-NSC[8,10]
SSAFD15-[25-995/1]-F[5-36/1]-MMC[6,8,10,12]-N[4,5,6,8,10]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread N to Fine One [NSC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	F (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)	Threaded (Coarse) [M] (mm)
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	5 ～ 36	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 10	-	-	5 ～ 36	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 12	-	5 ～ 36	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 12	-	5 ～ 36	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 10	6 ～ 12	-	5 ～ 36	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 14	5 ～ 36	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 14	5 ～ 36	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 10	-	10 ～ 14	5 ～ 36	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 12	-	-	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 15	-	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 15	-	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 12	6 ～ 15	-	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 14	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 14	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 12	-	10 ～ 14	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 14	-	-	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 17	-	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	6 ～ 17	-	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 14	6 ～ 17	-	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	5 ～ 48	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	5 ～ 48	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 14	-	10 ～ 18	5 ～ 48	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	7 ～ 72	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	-	7 ～ 72	-	6 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 18	-	-	7 ～ 72	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	8 ～ 20	-	7 ～ 72	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	8 ～ 20	-	7 ～ 72	-	6 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 18	8 ～ 20	-	7 ～ 72	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	7 ～ 72	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	7 ～ 72	-	6 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	8 ～ 18	-	10 ～ 18	7 ～ 72	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	-	-	7 ～ 72	6 ～ 20	-	8 ～ 24
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	-	-	7 ～ 72	-	6 ～ 20	8 ～ 24
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	8 ～ 18	-	-	7 ～ 72	-	-	8 ～ 24
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	8 ～ 25	-	7 ～ 72	6 ～ 20	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	8 ～ 25	-	7 ～ 72	-	6 ～ 20	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	8 ～ 18	8 ～ 25	-	7 ～ 72	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	7 ～ 72	6 ～ 20	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	7 ～ 72	-	6 ～ 20	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	8 ～ 18	-	10 ～ 18	7 ～ 72	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	-	-	-	8 ～ 90	8 ～ 24	-	10 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	8 ～ 18	-	-	8 ～ 90	-	-	10 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	-	10 ～ 30	-	8 ～ 90	8 ～ 24	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	8 ～ 18	10 ～ 30	-	8 ～ 90	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	-	-	10 ～ 18	8 ～ 90	8 ～ 24	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1492	h5	Induction Hardened (58HRC~)	8 ～ 18	-	10 ～ 18	8 ～ 90	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 90	10 ～ 30	-	12 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 18	-	-	10 ～ 90	-	-	12 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	-	12 ～ 30	-	10 ～ 90	10 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 18	12 ～ 30	-	10 ～ 90	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	12 ～ 18	10 ～ 90	10 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 18	-	12 ～ 18	10 ～ 90	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 90	12 ～ 30	-	16 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 18	-	-	10 ～ 90	-	-	16 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	-	15 ～ 30	-	10 ～ 90	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 18	15 ～ 30	-	10 ～ 90	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	14 ～ 18	10 ～ 90	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 18	-	14 ～ 18	10 ～ 90	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 795	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 18	3 ～ 5	-	6
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 795	g6	Induction Hardened (56HRC~)	-	6	-	5 ～ 18	3 ～ 5	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 24	3 ～ 6	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 24	-	6	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	-	6 ～ 8	-	5 ～ 24	3 ～ 6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	-	6 ～ 8	-	5 ～ 24	-	6	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 30	4 ～ 8	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 30	-	6 ～ 8	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	8	-	-	5 ～ 30	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	6 ～ 10	-	5 ～ 30	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	6 ～ 10	-	5 ～ 30	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	8	6 ～ 10	-	5 ～ 30	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	10	5 ～ 30	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	10	5 ～ 30	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	8	-	10	5 ～ 30	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 36	4 ～ 8	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 36	-	6 ～ 8	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	8	-	-	5 ～ 36	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	6 ～ 10	-	5 ～ 36	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	6 ～ 10	-	5 ～ 36	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	8	6 ～ 10	-	5 ～ 36	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	10	5 ～ 36	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	10	5 ～ 36	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	8	-	10	5 ～ 36	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 36	4 ～ 10	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 36	-	6 ～ 10	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	8 ～ 10	-	-	5 ～ 36	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	-	6 ～ 12	-	5 ～ 36	4 ～ 10	-	-

Loading...Tải…

Basic InformationThông tin cơ bản

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

MISUMI Unit Example related to this product

back next

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Change Tapped Thread N to Fine One [NSC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

F(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

Threaded (Coarse) [M](mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut (Part Number)

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

MISUMI Unit Example related to this product

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều