Ball Bearings（Rolling Element Material：Stainless Steel）

Single Row Deep Groove Ball Bearing (Open Type / Sealed Type / Shielded Type)

NSK

The raceway of the deep groove ball bearing includes arc-shaped deep grooves for both the inner and outer rings and can support radial loads, axial loads in both directions, and synthetic loads, and are also ideal for high-speed rotation applications. Products on this page: 600 series

• Volume Discount

Deep-Groove Ball Bearing for high speed applications

NTN

Deep groove ball bearings with deep arcuate grooves on the tracks of both the inner and outer rings.[Features]・ It is possible to receive a radial load, an axial load in both directions, or a combined load that is a combination thereof.・ Ideal for high-speed rotation.・ Open type, sealed ball bearings with grease (both sealed or both shielded bearings), bearings with retaining rings, etc., are also available.[Applications]・ It can be used for parts that rotate at high speed with low friction torque and for all applications that require low noise and low vibration.

Miniature Ball Bearings And Small Diameter Ball Bearings

NTN

Small diameter ball bearings with a bearing outer diameter of less than 9 mm, a bearing inner diameter of less than 10 mm, and a bearing outer diameter of 9 mm or more.[Features]·Small diameter sizes are available.·Suitable for high speed rotation.·Open type, sealed ball bearings with grease (both seals or both shield bearings), and bearings with retaining rings are available.[Application]・ It can be used for parts that rotate at high speed with low friction torque and for all applications that require low noise and low vibration.

Angular Ball Bearing (Single Row/Double Row)

NSK

A ball bearing that can simultaneously support a radial load and a large axial load in 1 direction.[Features]·Contact angle type of 15 degrees, 25 degrees, 30 degrees, 40 degrees·There are various retainers made of polyamide, steel, and brass[Applications]·Can be used for hydraulic pumps and vertical pumps that are applied with axial loads in addition to radial loads, machine tool spindles that require improved shaft rotation accuracy and rigidity, grinding spindles, electromagnetic clutches of automotive air conditioners, etc.

Small Diameter Ball Bearing (Open type, double shield type, rubber seal type)

NSK MICRO

Small Ball BearingsThese bearings are used for various applications that require low friction and high-speed rotation in small spaces. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 1 and 10 ● Outer Diameter Minimum / Maximum (mm.) : 3 and 19 ● Width Minimum / Maximum (mm.) : 1 and 6 ● Precision (JIS) : Grade 0 ● Bearing Type : Open/ Closed (Double Shielded (ZZ) and Rubber Sealed (DD1)) ● Load Direction : Radial Load[Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

CAD ：

2D

Self-Aligning Ball Bearings

NSK

A bearing with a spherical surface wherein the center of the raceway of the outer bearing coincides with the center of the bearing itself and the inner ring includes two rows of raceway groves. Products on this page: 1200, 1300, 2200 and 2300 series

Small Ball Bearings Double Shield Type -Stainless Steel-

MISUMI

[Product Specifications]Shield material and shape: double shield type, inner and outer ring materials: equivalent to SUS440C, outer ring type: flat, precision (JIS): class 0.

• Volume Discount

CAD ：

2D / 3D

Deep Groove Ball Bearings Double Shield Type -Stainless Steel-

MISUMI

[Product Specifications]Shield material and shape: double shield type, inner and outer ring materials: equivalent to SUS440C, outer ring type: flat, precision (JIS): class 0.

• Volume Discount

CAD ：

2D / 3D

Thrust Ball Bearing

MISUMI

· Type: Thrust Bearing· Bearing Style: Open Type· Load Direction: ThrustFor complete product overview and details on Thrust Ball Bearing - Large Sized, Open Type (MISUMI) see the sections below:

• Volume Discount

CAD ：

2D / 3D

Radial Ball Bearing, Deep Groove (Metric Series)

MINEBEA

Radial Ball Bearing, Deep Groove (Metric Series)These bearings are commonly used in automotive and industrial applications where there is a need for high-speed operation, such as in gearboxes and conveyor systems. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 1 and 10 ● Outer Diameter Minimum / Maximum (mm.) : 3 and 24 ● Width Minimum / Maximum (mm.) : 1 and 8 ● Precision (JIS) : Class 0 ● Bearing Type : Open/ Closed (Double Shielded (ZZ) and Rubber Sealed (DD)) [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Stainless Steel Ball Bearing, SUS440C, SS Series

NANKAISEIKOJO

Stainless steel bearings that are resistant to rust, corrosion, and a high temperature. 6800, 6900, 6000, 6200, and 6300 series are included as standard inventory. A mode with an included retaining ring is also included in the product line-up.[Features]· High stability against metal complexes.· Can be used in higher temperature environments compared to standard bearing materials (operating temperature range is higher by about 50°C).· High resistance to chemicals.· SUS440C stainless steel is used for the inner and outer rings and balls, etc.· SUS304 stainless steel is used for the cage, shield and retaining ring.· Nitrile rubber is used for the seal as standard, but fluorine rubber is also available upon request.· A nitride arsenic ceramic ball (Si3N4) can also be accommodated.· JIS0 level or higher precision.· Heat resistant grease is used for the SMT sealed stainless steel bearings.

CAD ：

2D / 3D

Small Ball Bearings Double Shield Type with Flange Stainless Steel

MISUMI

[Product Specifications]Shield material and shape: double shield type, inner and outer ring materials: equivalent to SUS440C, outer ring type: with flange, precision (JIS): class 0.

• Volume Discount

CAD ：

2D / 3D

Ball Bearings, Small Diameter Deep Groove, Stainless Steel Metric Series

EZO

Ball Bearings, Small Diameter Deep Groove, Stainless Steel Metric Series These bearings are used for a wide range of applications that require high-speed rotation. These bearings are commonly used in electric motors and available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 1.5 and 9 ● Outer Diameter Minimum / Maximum (mm.) : 4 and 26 ● Width Minimum / Maximum (mm.) : 1.2 and 8 ● Precision (JIS) : Grade 0 ● Bearing Type : Open (No cover)/ Closed Double shielded (ZZ) ● Load Direction : Radial Load[Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Radial Ball Bearing, Flanged, Deep Groove (Metric Series)

MINEBEA

Radial Ball Bearing, Flanged, Deep Groove (Metric Series)These bearings are commonly used in automotive and industrial applications where there is a need for high-speed operation, such as in gearboxes and conveyor systems. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 2 and 10 ● Outer Diameter Minimum / Maximum (mm.) : 5 and 22 ● Width Minimum / Maximum (mm.) : 2.3 and 7 ● Precision (JIS) : Class 0 ● Bearing Type : Closed (Double Shielded (ZZ) [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Small Ball Bearing/Double Shielded/Stainless

MISUMI

Small Ball Bearing/Double Shielded/StainlessThese bearings are used for various applications that require low friction and high-speed rotation in small spaces. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 2 and 8 ● Outer Diameter Minimum / Maximum (mm.) : 5 and 28 ● Width Minimum / Maximum (mm.) : 2.3 and 9 ● Precision (JIS) : Class 0 ● Bearing Type : Closed (Double Shielded (ZZ)) [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

• Volume Discount

CAD ：

2D / 3D

Ball Bearing, Low Dust Generation Grease Filled

MISUMI

[Features]This is a bearing filled with low dust generation type grease. [Product Specifications]Shield material and shape: double shield type, inner and outer ring materials: equivalent to SUS440C, outer ring type: flat, precision (JIS): class 0.

• Volume Discount

CAD ：

2D / 3D

Deep Groove Ball Bearing/Double Shielded/Stainless

MISUMI

Deep Groove Ball Bearing/Double Shielded/StainlessThese bearings are used for a wide range of applications that require high-speed rotation. These bearings are commonly used in electric motors and are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 10 and 30 ● Outer Diameter Minimum / Maximum (mm.) : 15 and 62 ● Width Minimum / Maximum (mm.) : 4 and 16 ● Precision (JIS) : Class 0 ● Bearing Type : Closed (Double Shielded (ZZ)) [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

• Volume Discount

CAD ：

2D / 3D

Ball Bearings For Special Environment - SUS304 Ball Bearing

MISUMI

This special type ball bearing is optimized for special environments such as high-temperature and corrosive environments.[Specifications]· Material: Stainless steel (SUS304)· Non grease, Non-oil· Water and heat resistant

• Volume Discount

CAD ：

2D / 3D

UKB Ball Bearing, Deep-Groove Type

KASHIMA UKB

[Features]· No grease oil, etc., is required.· Can be used with no rust and degradation in water and seawater and in locations where irregular exposure to water occurs.· Because the bearing is chemically resistant, it performs well with chemicals and in areas where chemicals are used.· Can be used for foods, chemicals, pharmaceutical products, etc.· Can be used across a wide temperature range, from low to high temperatures.· Because the material used is not magnetic, malfunctioning of measuring instruments, such as magnetic readers, is avoided.· High insulation provides isolation between the housing and the shaft.· Useful for reducing product weight.· The shape can be set arbitrarily according to design requirements.

Stainless Steel Ball Bearing, Deep Groove

KSK

Products on this page: SS6000, SS6200, SS6300, SS6900

Stainless Steel Grooved Bearing V-Groove

MISUMI

Deep Groove Ball Bearings, Stainless SteelThe outside diameter of bearing is decreased by directly machining a V groove on the outer ring of the bearing. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter (mm.) : 3, 4 and 6 ● Outer Diameter (mm.) : 12, 14 and 16 ● Width (mm.) : 4 ● Precision (JIS) : Class 0 ● Bearing Type : Closed [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

• Volume Discount

CAD ：

2D / 3D

Thrust Angular Ball Bearings

NSK MICRO

High quality angular ball bearing made by a manufacturer specializing in small-diameter bearings. Inner diameters of ø2 and up are available. With a contact angle of 45°, this bearing is resistant to thrust load and suitable for supporting ball screws.

CAD ：

2D

Deep Groove Ball Bearings, Inches

EZO

Deep Groove Ball Bearings, InchesDeep grove ball bearings that are specified in inches are used for a wide range of applications that require high-speed rotation, such as in electric motors. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Inch System● Inner Diameter Minimum / Maximum (in.) : 0.1250 and 0.6250 ● Outer Diameter Minimum / Maximum (in.) : 0.375 and 1.3750 ● Width Minimum / Maximum (mm.) : 0.1562 and 0.3438 ● Precision (JIS) : Class 0 ● Bearing Type : Open (No cover) /Closed (Double Shielded (ZZ)) ● Load Direction : Radial Load[Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Stainless Steel Ball Bearings With Bolts Hex Groove Type

EASTERN SEIKO

Stainless Steel Ball Bearings With Bolts Hex Groove TypeStainless steel ball bearings with bolts hex groove type are used in industrial machinery, such as conveyor, and mixers, etc. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 3 and 20 ● Outer Diameter Minimum / Maximum (mm.) : 6 and 47 ● Width Minimum / Maximum (mm.) : 2.5 and 14 ● Precision (JIS) : Class 0 ● Bearing Type : Closed (Double Shielded (ZZ)) ● Load Direction : Radial Load[Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Stainless Ball Bearing, Deep Groove, 6,000H, 6,200H, 6,300H, Metric Series

EZO

Stainless Ball Bearing, Deep Groove, 6,000H, 6,200H, 6,300H, Metric SeriesThese bearings are used for a wide range of applications that require high-speed rotation. These bearings are commonly used in electric motors and available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 10 and 50 ● Outer Diameter Minimum / Maximum (mm.) : 26 and 80 ● Width Minimum / Maximum (mm.) : 8 and 19 ● Precision (JIS) : Class 0 ● Bearing Type : Open/ Closed (Double Shielded (ZZ)) and (Rubber Sealed (2RS)) ● Load Direction : Radial Load[Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Ball Bearing, Heat Resistant/Grease Filled/Max Operating Temperature 230Deg.C

MISUMI

This bearing contains heat resistant grease that can be used at temperatures up to 230°C.

• Volume Discount

CAD ：

2D / 3D

Ball Bearing, Heat Resistant/Grease Filled/Max Operating Temperature 160Deg.C

MISUMI

This bearing contains heat resistant grease that can be used at temperatures up to 160°C.

• Volume Discount

CAD ：

2D / 3D

Ball Bearings With Stainless Steel Flange (Small Diameter / Deep Groove) Double Shield Type, Light Duty / Medium Speed Rotation Type

MISUMI

Deep Groove Ball Bearing/Double Shielded/Stainless With FlangeThese bearings are used for a wide range of applications that require high-speed rotation. These bearings are commonly used in electric motors and are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter Minimum / Maximum (mm.) : 2 and 15 ● Outer Diameter Minimum / Maximum (mm.) : 5 and 28 ● Width Minimum / Maximum (mm.) : 2.3 and 7 ● Precision (JIS) : Class 0 ● Bearing Type : Closed (Double Shielded (ZZ)) [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

• Volume Discount

CAD ：

2D / 3D

Bearings with Set Screws

MISUMI

A set screw can be used to secure the shaft, eliminating the need for a bearing nut. 2 types of grease are available: general grease and grease for food machines.

• Volume Discount

CAD ：

2D / 3D

Ball Bearings for Special Environment - Non-Grease, Non-Oil Plastic Ball

MISUMI

A ceramic bearing that is suitable for non-magnetic, insulating, and corrosive environments. Combination types are also available depending on the application.

• Volume Discount

CAD ：

2D / 3D

Highly Corrosion Resistant, High Strength Small Deep Groove Ball Bearings (PRUSTRO BEARING)

MISUMI

• Volume Discount

CAD ：

2D / 3D

Small Ball Bearing/Non-Contact Sealed/Contact Sealed/Stainless

MISUMI

[Product Specifications]Shield material and shape: rubber seal type, inner and outer ring materials: equivalent to SUS440C, outer ring type: flat, precision (JIS): class 0.

• Volume Discount

CAD ：

2D / 3D

Ultra-Thin Radial Ball Bearing A-Series Ultra-Thin Type

MINEBEA

This type has an inner diameter that is larger than the outer diameter of a normal radial ball bearing.

Stainless Steel Grooved Bearing U Groove

MISUMI

Deep Groove Ball Bearing, Stainless SteelThe outside diameter of bearing is decreased by directly machining a U groove on the outer ring of the bearing. These bearings are available in various sizes to choose from. [Feature] ● Bearing Size Standards: Metric System● Inner Diameter (mm.) : 3, 4 and 6 ● Outer Diameter (mm.) : 12, 14 and 16 ● Width (mm.) : 4 ● Precision (JIS) : Class 0 ● Bearing Type : Closed [Application] It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

• Volume Discount

CAD ：

2D / 3D

UKB Ball Bearing Angular Shape Single Row

KASHIMA UKB

Choose from an abundant variety of materials. Product on this page: UKB7000 series[Features]· No grease oil, etc., is required.· Can be used with no rust and degradation in water and seawater and in locations where irregular exposure to water occurs.· Because the bearing is chemically resistant, it performs well with chemicals and in areas where chemicals are used.· Can be used for foods, chemicals, pharmaceutical products, etc.· Can be used across a wide temperature range, from low to high temperatures.· Because the material used is not magnetic, malfunctioning of measuring instruments, such as magnetic readers, is avoided.· High insulation provides isolation between the housing and the shaft.· Useful for reducing product weight.· The shape can be set arbitrarily according to design requirements.· The customer can select from a wide selection of different materials according to application.

Ultra-Thin, Stainless 6700H, 6800H, 6900H, Metric Series

EZO

Standard stainless steel bearing. A wide variety of different types are available, including models which include a thin outer ring flange as well as models which include or do not include a shield/seal.

Rubber Mold Bearings

NTN

This rubber mold bearing is a rubber roller which is produced by burning urethane rubber and directly baking it to the outer diameter of a miniature, small-diameter, or small deep groove ball bearing, making it suitable for feed mechanisms that require accuracy as well as other low vibration and low noise applications.