What are ball plungers used for?

Ball plungers are tiny tools used in different areas to help with precise positioning or locking. They have a spring-loaded ball inside a housing. When the ball is pressed, it extends, and when released, it retracts. They are commonly found in industries like manufacturing and electronics. They are useful for tasks such as aligning parts, holding them in place, or creating a detent mechanism for secure positioning.

What material is ball plunger?

Ball plungers are usually made from different materials depending on their specific use. The most common materials are stainless steel, hardened steel, brass, and plastic. Stainless steel is resistant to rust and very strong. Hardened steel is tough and can withstand wear and tear. Brass is used when electrical conductivity is important. Plastic ball plungers are lightweight and used for less demanding tasks. The material choice depends on factors like strength, durability, and the purpose of the ball plunger.

What is the standard size of a ball plunger?

The standard size of a ball plunger can vary depending on the manufacturer and application. However, they generally come in different diameters and lengths. Common diameters range from 3mm to 20mm, while lengths can range from 10mm to 50mm or more. These sizes are widely used, but it's important to note that specific industries or applications may have their own standard sizes based on their requirements.

How much pressure does a plunger create?

The amount of pressure a plunger creates depends on various factors, including its design, size, and the force applied to it. Plungers typically generate pressure by compressing air or liquid trapped within a confined space. The specific pressure created can vary significantly. In household use, a plunger can create enough pressure to unclog a drain. However, in industrial applications, specialized plungers can generate much higher pressures to perform tasks such as hydraulic or pneumatic actuation.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

NABEYA BI-TECH Ball Plungers

Ball Plungers products in the Automation Components category from NABEYA BI-TECH. The product can be selected based specifications such as Mounting Method, Outer Dia. M, Stroke S, Tip Material, Body Material. NABEYA BI-TECH offers products around 7 items and the product specifications can easily be compared. Search and select detailed specifications of parts for your machine with free CAD download. NABEYA BI-TECH products are available to order through MISUMI online 24/7. Free shipping, no minimum order.

Show More Detail Show More Detail

Mounting Method	Screw (Hex) Screw (Straight Slot) Screw (Cap) Flanged Press Fit
Brand	(30) (13) BRAMA (4) HARA DOKI (3) IMAO CORPORATION (16) KONISHI (4) NABEYA (4) NABEYA BI-TECH (7) TRUSCO NAKAYAMA (2) WOOCHANG (2)
CAD	2D 3D
Days to Ship	All Same day 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less Others

7 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, PBF

NABEYA BI-TECH

- PBF series-Miniature Ball Plungers. - Part number are series: PBF, PBF-KN, PBF-KS and PBF-KSN. - Ball Plungers type: Light Load and Heavy Load. - Main Body Material: Steel and Stainless Steel SUS303. - Main Body Material surface treatment: Black Oxide Coating for PBF and PBF-KS type. - Ball Material: Steel and Stainless Steel SUS303. - Ball Heat Treatment: Hardening for steel type materials. - Spring Material: Stainless Steel SUS631J1. - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12, 16, 20 and 24. - Ball Plungers Mounting Method: Screw (flathead groove)

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	3 ～ 24	0.4 ～ 5.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50 / 50.01~100 / 100.01~300	Hardening	Not Provided / Black Oxide	Not Provided

From: 61,183 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Press Fit Plunger PPR

NABEYA BI-TECH

Pressure-type plunger.[Features]- Press-fit plunger.- [PPR] made entirely of stainless steel.- [PPR-KD] ball is made of plastic.- Does not scratch the workpieces.- [PPR-KU] and [PPR-KD] are electrically insulated.- Operating temperature (PPR-KUPPR-KD): –30°C to +50°C.- Use the ball button BB with improved abrasion resistance for the receiving side.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	4 ～ 12	0.8 ～ 4	Stainless Steel / Plastic	Stainless Steel / Plastic	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 43,258 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Plastic Ball Plunger - PPP

NABEYA BI-TECH

[Features]· Plastic main body. Electrically insulated.· Two types of ball are used: stainless steel balls (PPP-N) and plastic balls (PPP-P).· Operable temperature of -30°C to +50°C. For the receiving end, please use abrasion resistant ball buttons (BB).

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	6 ～ 10	1 ～ 2	Stainless Steel / Plastic	Plastic	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 69,950 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Mini Ball Plunger PNBF

NABEYA BI-TECH

- Mini Ball Plunger PNBF series. - Miniature Ball Plungers Main Body Material: Steel SUM22L and Stainless Steel SUS303. - Main Body Material surface treatment: Black Oxide Coating for PBSF. - Ball Material: Steel SUJ2 and Stainless Steel SUS404C. - Ball Heat Treatment: Hardening for steel type materials. - Spring Material: Stainless Steel SUS631. - Miniature Ball Plungers Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12, 16, 20 and 24. - Initial Load (Range): 0.01~50 N and 50.01-100 N. - PBSH Ball Plungers Mounting Method: Screw (hexagon)

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.4 ～ 3.5	Steel / Stainless Steel	Steel / Stainless Steel	Provided	0.01~50 / 50.01~100	Hardening	Not Provided / Black Oxide	Not Provided

From: 126,125 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, FP/MP/MPS

NABEYA BI-TECH

[Features]· A spacer is inserted between the ball and spring (excluding M3).· The ball rotates smoothly.· [FP] Light load, [MP] heavy load, and [MPS] heavy load (all stainless steel) / [MPS-Z] extreme heavy load (all stainless steel).· [MPS], [MPS-Z] (all stainless steel). Superior corrosion resistance and heat resistance.· [FP], [MP] are equipped with a nylon self-locking feature (excluding M3/M4).· For [MPS], tighten the ball plunger periodically to prevent it from loosening.· [EBF] miniature ball plunger, which includes a built-in contact switch, is also available.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided / Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 137,681 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Press Ball Plunger PPSS

NABEYA BI-TECH

- PPSS series -Press fit type ball plunger. - Main Body Material: Stainless Steel SUS303. - Ball Material: Steel SUJ2 and Stainless Steel SUS404C. - Tip Heat Treatment: Hardening. - Ball Hardness: 54~ 60HRC - Spring Material: Stainless Steel SUS631J1. - Outer diameter Size (M): 3, 3.5, 4, 4.5, 5, 5.5 and 6. - Initial Load: 4.5, 6, 8, 9.5, 11, 15.5 and 18 N. - PPSS Ball Plungers Mounting Method: Press Fitting - press-fit type ball plungers can vary depending on the design, size, and specifications of the plunger.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	3 ～ 6	0.65 ～ 1.5	Stainless Steel	Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided	Not Provided

From: 147,241 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, PBSH

NABEYA BI-TECH

- PBSH and PBSFS Series-Miniature Ball Plungers. - Part number are series: PBSF and PBSFS. - Miniature Ball Plungers Main Body Material: Steel SUM22L and Stainless Steel SUS303. - Main Body Material surface treatment: Black Oxide Coating for PBSF. - Ball Material: Steel SUJ2 and Stainless Steel SUS303. - Ball Heat Treatment: Hardening for steel type materials. - Spring Material: Stainless Steel SUS631J1. - Miniature Ball Plungers Coarse Thread Size (M): 4, 5, 6, 8, 10 and 12 - Initial Load (Range): 0.01~50 N - PBSH Ball Plungers Mounting Method: Bolt (Cap)

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Cap)	4 ～ 12	0.8 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 255,610 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Mounting Method
Outer Dia. M(mm)
Stroke S(mm)
Tip Material
Body Material
Lock
Initial Load (Range)(N)
Tip Heat Treatment
Main Body Surface Treatment
Tip Surface Treatment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH
Product SeriesDòng sản phẩm	Miniature Ball Plungers, PBF	Press Fit Plunger PPR	Plastic Ball Plunger - PPP	Mini Ball Plunger PNBF	Miniature Ball Plungers, FP/MP/MPS	Press Ball Plunger PPSS	Miniature Ball Plungers, PBSH
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	61,183 VND-	43,258 VND-	69,950 VND-	126,125 VND-	137,681 VND-	147,241 VND-	255,610 VND-
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more
Mounting Method	Screw (Straight Slot)	Press Fit	Screw (Straight Slot)	Screw (Hex)	Screw (Hex)	Press Fit	Screw (Cap)
Outer Dia. M(mm)	3 ～ 24	4 ～ 12	6 ～ 10	3 ～ 16	3 ～ 16	3 ～ 6	4 ～ 12
Stroke S(mm)	0.4 ～ 5.5	0.8 ～ 4	1 ～ 2	0.4 ～ 3.5	0.5 ～ 2.5	0.65 ～ 1.5	0.8 ～ 2.5
Tip Material	Steel / Stainless Steel	Stainless Steel / Plastic	Stainless Steel / Plastic	Steel / Stainless Steel	Steel / Stainless Steel	Stainless Steel	Steel / Stainless Steel
Body Material	Steel / Stainless Steel	Stainless Steel / Plastic	Plastic	Steel / Stainless Steel	Steel / Stainless Steel	Stainless Steel	Steel / Stainless Steel
Lock	Not Provided	Not Provided	Not Provided	Provided	Not Provided / Provided	Not Provided	Not Provided
Initial Load (Range)(N)	0.01~50 / 50.01~100 / 100.01~300	0.01~50	0.01~50	0.01~50 / 50.01~100	0.01~50	0.01~50	0.01~50
Tip Heat Treatment	Hardening	Not Provided / Hardening	Not Provided	Hardening	Hardening	Hardening	Hardening
Main Body Surface Treatment	Not Provided / Black Oxide	Not Provided	Not Provided	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided	Not Provided / Black Oxide
Tip Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. M(mm)
2

2.2

2.5

2.6

3

M 3

3.4

3.5

3.6

4

M 4

4.5

5

M 5

5.5

6

M 6

7

8

M 8

9

10

M10

12

M12

13

15

16

M16

20

24
Drawing

ClearTrống

Stroke S(mm)
0.2

0.3

0.4

0.5

0.6

0.65

0.7

0.8

0.9

0.95

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.1

2.3

2.4

2.5

2.6

2.7

2.8

3

3.1

3.2

3.3

3.5

3.8

4

4.5

5.2

5.5

6.6

10
Drawing

ClearTrống

Tip Material
- Steel
- Stainless Steel
- Plastic
- Others / Ceramics
ClearTrống

Body Material
- Steel
- Stainless Steel
- Brass
- Plastic
- Others
- SCM435
- SUS304
ClearTrống

Lock
- Not Provided
- Provided
ClearTrống

Initial Load (Range)(N)
- 0
- 0.01~50
- 50.01~100
- 100.01~300
ClearTrống

Tip Heat Treatment
- Not Provided
- Hardening
- Carburized
ClearTrống

Main Body Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Nickel Plating
- Trivalent Chromate
- Others
- Black Treatment
ClearTrống

Tip Surface Treatment
- Not Provided
- Others
ClearTrống

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

back next

Related Categories to Ball PlungersDanh mục liên quan đến Ball Plungers

FAQ Ball Plungers

Question: What are ball plungers used for?: Answer: Ball plungers are tiny tools used in different areas to help with precise positioning or locking. They have a spring-loaded ball inside a housing. When the ball is pressed, it extends, and when released, it retracts. They are commonly found in industries like manufacturing and electronics. They are useful for tasks such as aligning parts, holding them in place, or creating a detent mechanism for secure positioning.
Question: What material is ball plunger?: Answer: Ball plungers are usually made from different materials depending on their specific use. The most common materials are stainless steel, hardened steel, brass, and plastic. Stainless steel is resistant to rust and very strong. Hardened steel is tough and can withstand wear and tear. Brass is used when electrical conductivity is important. Plastic ball plungers are lightweight and used for less demanding tasks. The material choice depends on factors like strength, durability, and the purpose of the ball plunger.
Question: What is the standard size of a ball plunger?: Answer: The standard size of a ball plunger can vary depending on the manufacturer and application. However, they generally come in different diameters and lengths. Common diameters range from 3mm to 20mm, while lengths can range from 10mm to 50mm or more. These sizes are widely used, but it's important to note that specific industries or applications may have their own standard sizes based on their requirements.
Question: How much pressure does a plunger create?: Answer: The amount of pressure a plunger creates depends on various factors, including its design, size, and the force applied to it. Plungers typically generate pressure by compressing air or liquid trapped within a confined space. The specific pressure created can vary significantly. In household use, a plunger can create enough pressure to unclog a drain. However, in industrial applications, specialized plungers can generate much higher pressures to perform tasks such as hydraulic or pneumatic actuation.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

NABEYA BI-TECH Ball Plungers

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. M(mm)

Stroke S(mm)

Tip Material

Body Material

Lock

Initial Load (Range)(N)

Tip Heat Treatment

Main Body Surface Treatment

Tip Surface Treatment

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

Related Categories to Ball PlungersDanh mục liên quan đến Ball Plungers

FAQ Ball Plungers

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều