Square HSS End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 718,360 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	4	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 216,421 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 4-Flute 4AGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 641,699 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	2	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 163,955 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, 4-Flute 4SE

  NACHI(FUJIKOSHI)

  A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 258,103 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	8 ～ 45	6 ～ 25	4	52 ～ 121	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 454,579 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Medium Fine Pitch Roughing End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	20 ～ 70	6 ～ 25	-	60 ～ 145	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○]	Plane / Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Powder high-speed steel	-	-

  From: 1,130,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 2-Flute 2AGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 576,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute H.S.S End Mill (Uncoated/TIN/TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN / Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 220,258 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  2-flute, General-purpose, Short Type EDS

  OSG

  High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.45 ～ 60	1.1 ～ 80	6 ～ 42	2	45 ～ 170	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 543,333 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Pitch Roughing End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	13 ～ 45	6 ～ 25	3 ～ 6	57 ～ 121	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiAlN / Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 898,883 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αS α Nick Short Flute

  SANKO MFG

  Normal pitch type roughing end mill.Blade typeMaterials: Hs-Co (cobalt high-speed steel)Helix angle: 30°nick shape: standard pitch nick

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 60	10 ～ 95	6 ～ 42	4 ～ 6	70 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 793,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

  MISUMI

  [Features]·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 553,002 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Long AGREL

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	26 ～ 150	6 ～ 42	4 ～ 6	80 ～ 250	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,509,232 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 3-Flute 3GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	6 ～ 65	6 ～ 32	3	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 639,338 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS

  OSG

  V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	8 ～ 38	6 ～ 20	2	50 ～ 125	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: 1,441,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (roughing, short, fine-pitch type) VP-RESF

  OSG

  [Features]· Powdered V coating high-speed steel XPM roughing short blade series.· It also demonstrates strength when used on difficult-to-machine materials.· Those with outer diameter of 32 mm or more have center holes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	11 ～ 75	6 ～ 42	4 ～ 6	80 ～ 210	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 2,378,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute (Standard Blade)

  FUKUDA

  Side cutting and groove re-polishing are easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 100	13 ～ 80	6 ～ 42	4	51 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 523,274 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	2	60 ～ 215	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 324,171 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	4	60 ～ 215	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 344,432 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EX-Long End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 25	100 ～ 120	16 ～ 25	2	160 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,192,858 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

  MISUMI

  [Features]·High speed steel powder square regular blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 635,898 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]·High-speed steel uncoated square regular blade length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 307,571 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 4-Flute 4GE

  NACHI(FUJIKOSHI)

  It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 659,797 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy HV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 776,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 4-Flute, Long 4AGEL

  NACHI(FUJIKOSHI)

  Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	4	60 ～ 210	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 746,354 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Long Type EDL

  OSG

  General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 653,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN

  OSG

  Long shank type 2-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	2	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,195,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (4-flute short type) V-XPM-EMS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 40	10 ～ 65	6 ～ 32	4	55 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,263,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (Multi-Flute Short Type) XPM-EMS

  OSG

  4-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	55 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 936,667 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF

  OSG

  Next-generation HSS roughing end mill that can cut in a wide range - dry and wet.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 40	13 ～ 63	6 ～ 32	4 ～ 6	80 ～ 185	general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,760,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute (Standard Blade)

  FUKUDA

  Wide range of blade lengths and an abundance of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 100	2 ～ 80	6 ～ 42	2	42 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 504,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Extra Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 60	2.5 ～ 300	6 ～ 42	2	42 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 598,814 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Extra Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	30 ～ 300	6 ～ 42	4	70 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 72,392 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TL S Coated Estech 2-Flute Long

  SANKO MFG

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	2	55 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 847,861 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high f...Readmore

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 838,222 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαM P Coating Xα Nick Regular Flute

  SANKO MFG

  [Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	15 ～ 100	6 ～ 32	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,336,512 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Extra Long Roughing End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	-	-	4 ～ 6	-	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 2,922,735 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  1-Flute End Mill for Aluminum Processing

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 6	14	8	1	60	Aluminum[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	-	-	Cobalt HSS	-	-

  From: 528,678 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute EXTRA Long End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 15	30 ～ 100	6 ～ 16	2	70 ～ 155	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 345,736 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powder HSS 4-Flute Unequal Split Fine Pitch Roughing End Mill

  DYC

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 20	50 ～ 60	16 ～ 20	4	110 ～ 125	-	-	TiAlN	-	-	-	Powder high-speed steel	-	-

  From: 1,381,406 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,613,757 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,028,851 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,202,550 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 893,102 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	YG 1	NACHI(FUJIKOSHI)	YG 1	NACHI(FUJIKOSHI)	MISUMI	YG 1	NACHI(FUJIKOSHI)	OSG KOREA CORP	OSG	YG 1	SANKO MFG	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	FUKUDA	YG 1	YG 1	YG 1	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	SANKO MFG	SANKO MFG	SANKO MFG	YG 1	YG 1	OSG KOREA CORP	DYC	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	4-Flute End Mill (M42 HSS)	AG Mill, 4-Flute 4AGE	2-Flute End Mill (M42 HSS)	Super Hard, 4-Flute 4SE	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	Medium Fine Pitch Roughing End Mill	AG Mill, 2-Flute 2AGE	4-Flute H.S.S End Mill (Uncoated/TIN/TICN)	2-flute, General-purpose, Short Type EDS	Fine Pitch Roughing End Mill	αS α Nick Short Flute	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	AG Mill, Roughing, Long AGREL	G Standard End Mill, 3-Flute 3GE	V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS	V Coating XPM End Mill (roughing, short, fine-pitch type) VP-RESF	3S End Mill, 4-Flute (Standard Blade)	2-Flute Long End Mill (M42 HSS)	4-Flute Long End Mill (M42 HSS)	EX-Long End Mill	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	G Standard End Mill, 4-Flute 4GE	Heavy HV	AG Mill, 4-Flute, Long 4AGEL	2-flute, General-purpose, Long Type EDL	XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	XPM End Mill (Multi-Flute Short Type) XPM-EMS	WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF	3S End Mill, 2-Flute (Standard Blade)	3S End Mill, 2-Flute Extra Long Blade	3S End Mill, 4-Flute Extra Long Blade	SS2TL S Coated Estech 2-Flute Long	KHB4TS Hybrid Short 4-Flute Blade	P-XαM P Coating Xα Nick Regular Flute	Extra Long Roughing End Mill	1-Flute End Mill for Aluminum Processing	2-Flute EXTRA Long End Mill	Powder HSS 4-Flute Unequal Split Fine Pitch Roughing End Mill	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
From	718,360 VND Special Price On Sale Till 31/03/2025	216,421 VND	641,699 VND	163,955 VND	258,103 VND	454,579 VND	1,130,270 VND	576,388 VND	220,258 VND	543,333 VND Special Price On Sale Till 31/03/2025	898,883 VND	793,873 VND	553,002 VND	1,509,232 VND	639,338 VND	1,441,667 VND	2,378,333 VND	523,274 VND	324,171 VND	344,432 VND	1,192,858 VND	635,898 VND	307,571 VND	659,797 VND	776,873 VND	746,354 VND	653,333 VND	1,195,000 VND	1,263,333 VND	936,667 VND	1,760,000 VND	504,388 VND	598,814 VND	72,392 VND	847,861 VND	838,222 VND	1,336,512 VND	2,922,735 VND	528,678 VND	345,736 VND	1,381,406 VND	1,613,757 VND	1,028,851 VND	1,202,550 VND	893,102 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	4 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	6 Day(s)	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s)	17 Day(s)	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s)	Same day or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	Same day or more	17 Day(s)	17 Day(s)	8 Day(s) or more	17 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s)	6 Day(s)	4 Day(s) or more	7 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TiCN 4 Flutes S (Short)					TiCN 4 Flutes S (Short)							Non-Coated 2 Flutes L (Long)									AS 2 Flutes R (Regular)	Non-Coated 2 Flutes R (Regular)																			AS 4 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	TiCN 4 Flutes R (Regular)
Blade diameter (D)(φ)	6 ～ 32	1 ～ 50	2.5 ～ 50	1 ～ 50	2.5 ～ 50	3 ～ 25	6 ～ 25	1 ～ 50	2 ～ 40	0.45 ～ 60	6 ～ 30	5 ～ 60	3 ～ 25	6 ～ 50	3 ～ 40	3 ～ 20	6 ～ 50	3 ～ 100	2 ～ 50	2 ～ 50	16 ～ 25	1 ～ 25	1 ～ 25	2.5 ～ 50	3 ～ 50	3 ～ 40	0.8 ～ 40	8 ～ 50	2.5 ～ 40	2 ～ 40	6 ～ 40	0.8 ～ 100	0.8 ～ 60	3 ～ 60	3 ～ 40	5 ～ 30	5 ～ 40	20 ～ 50	5 ～ 6	3 ～ 15	16 ～ 20	10 ～ 30	5 ～ 32	6 ～ 30	6 ～ 30
Blade length (ℓ)(mm)	13 ～ 53	2.5 ～ 75	7 ～ 70	2.5 ～ 75	7 ～ 70	8 ～ 45	20 ～ 70	2 ～ 70	8 ～ 65	1.1 ～ 80	13 ～ 45	10 ～ 95	15 ～ 90	26 ～ 150	6 ～ 65	8 ～ 38	11 ～ 75	13 ～ 80	10 ～ 125	10 ～ 125	100 ～ 120	3.5 ～ 60	3.5 ～ 60	7 ～ 70	9 ～ 70	15 ～ 125	6 ～ 110	20 ～ 75	10 ～ 65	8 ～ 65	13 ～ 63	2 ～ 80	2.5 ～ 300	30 ～ 300	15 ～ 105	15 ～ 55	15 ～ 100	-	14	30 ～ 100	50 ～ 60	45 ～ 90	13 ～ 53	19 ～ 68	19 ～ 68
Shank diameter (d)(mm)	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 32	6 ～ 20	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	16 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	8 ～ 25	6 ～ 32	-	8	6 ～ 16	16 ～ 20	10 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25
Number of flutes(sheet)	3 ～ 6	4	4	2	4	4	-	2	4	2	3 ～ 6	4 ～ 6	2	4 ～ 6	3	2	4 ～ 6	4	2	4	2	2	2	4	4 ～ 6	4	2	2	4	4	4 ～ 6	2	2	4	2	4	4 ～ 6	4 ～ 6	1	2	4	4 ～ 5	3 ～ 6	3 ～ 5	3 ～ 5
Overall Length (L)(mm)	57 ～ 133	55 ～ 165	50 ～ 160	55 ～ 165	50 ～ 160	52 ～ 121	60 ～ 145	50 ～ 160	50 ～ 150	45 ～ 170	57 ～ 121	70 ～ 210	60 ～ 160	80 ～ 250	50 ～ 150	50 ～ 125	80 ～ 210	51 ～ 180	60 ～ 215	60 ～ 215	160 ～ 200	45 ～ 130	45 ～ 130	50 ～ 160	50 ～ 160	60 ～ 210	50 ～ 195	80 ～ 350	55 ～ 165	55 ～ 165	80 ～ 185	42 ～ 180	42 ～ 400	70 ～ 400	55 ～ 190	60 ～ 135	80 ～ 220	-	60	70 ～ 155	110 ～ 125	95 ～ 166	57 ～ 133	63 ～ 144	63 ～ 144
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	TiCN	TiAlN / Non-Coated	AG	TiAlN	Non-Coated	TiCN	AG	AG	TiCN / Non-Coated	Non-Coated	TiAlN / Non-Coated	Non-Coated	Non-Coated	TiAlN	TiN	-	-	Non-Coated	TiAlN / Non-Coated	TiAlN / Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiN	Non-Coated	AG	Non-Coated	Non-Coated	-	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	TiCN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN
Blade shape type	Roughing	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Roughing	Roughing	Square	Roughing	Square	Square	Roughing	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Square	Square	-	Roughing	Roughing	Roughing	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	-	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	-	-	-	-	Available	-	-	Available	-	-	Available	Available	-	-	-	-	Available	-	-	-	Available	Available	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	-	-	Available	-	Available	Available	Available	Available
Tool Material Type	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	Straight	Straight	-	-	-	-	-	Straight	Straight	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	Straight	-	-	-	-	-

Loading...Tải…