Square HSS End Mills（Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2T S Coating S-TEC 2-Flute Short Flute

  SANKO MFG

  2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 697,174 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TL S Coated Estech 2-Flute Long

  SANKO MFG

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	2	55 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 847,861 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 838,222 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4T S Coating STEC 4-Flute Short

  SANKO MFG

  [Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 911,006 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4TL S Coating S TECH 4-Flute Long Flute

  SANKO MFG

  [Features]· 4-flute finishing endmill with TiCN coating.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	4	55 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 947,098 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 4-Flute Long Flute

  SANKO MFG

  A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	20 ～ 300	6 ～ 42	4	60 ～ 395	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 526,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSML S Coated Estech Muscle 3-Flute Long

  SANKO MFG

  [Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· A wide range of machining is possible, from heavy duty cutting to finishing machining.· Enables deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3	75 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	27 ～ 115	-

  From: 1,205,036 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HiVA Powder High-Speed Steel High-Helix

  SANKO MFG

  [Features]· Powder HSS is adopted.· A high helical type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	8 ～ 65	6 ～ 32	2 ～ 4	60 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	10 ～ 65	-

  From: 627,338 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HV4TLS 4-Flute Blade High Helix Long Shank

  SANKO MFG

  A high helical type end mill. A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	55 ～ 90	16 ～ 42	4	200 ～ 320	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	Available	Cobalt HSS	-	-

  From: 2,131,653 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαM P Coating Xα Nick Regular Flute

  SANKO MFG

  [Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	15 ～ 100	6 ～ 32	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,336,512 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSαLS S Coated Estech α Nick Long Shank

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	40 ～ 75	16 ～ 42	4 ～ 6	180 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 2,871,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαL S-Coating Fine Pitch Long Flute

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	100 ～ 270	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,445,814 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αS α Nick Short Flute

  SANKO MFG

  Normal pitch type roughing end mill.Blade typeMaterials: Hs-Co (cobalt high-speed steel)Helix angle: 30°nick shape: standard pitch nick

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 60	10 ～ 95	6 ～ 42	4 ～ 6	70 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 793,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αM α Nick Regular Flute

  SANKO MFG

  A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	35 ～ 120	10 ～ 42	4 ～ 6	100 ～ 240	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,169,062 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αLα Nick Long Flute

  SANKO MFG

  A standard pitch type roughing end mill. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 60	65 ～ 300	16 ～ 42	4 ～ 6	145 ～ 420	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,697,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αHM, α Nick Hard Type Regular Blade

  SANKO MFG

  A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 110	6 ～ 42	4 ～ 6	60 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 785,624 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αFS α Flat Nick Roughing Short Blade

  SANKO MFG

  A flat nick type roughing end mill. Semi-finishing is possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	25 ～ 80	10 ～ 42	4 ～ 6	90 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,160,448 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill G2

  ASAHI TOOLS

  The number of regrinding times is increased by adopting a long blade specification and a sinking sensor shape. "Machining application (machining shape)" side surface/groove," Tool material: "High speed steel, "Work material": General steel/Heat-treated steel/Cast iron/Aluminum/Copper/ Resin, "Helix angle": weak twist (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 42	4 ～ 6	90 ～ 280	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	Side / Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: 3,885,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra Long Shank End Mill with 4 Flutes EXLSE4

  EIKOSHA

  [Features]· 4-flute ultra-long shank.· For deep engraving.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	30 ～ 100	20 ～ 42	4	180 ～ 300	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 3,631,640 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute 50°High Helix End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 20	13 ～ 38	6 ～ 20	3	57 ～ 104	general steel[◎] / Quenched and tempered steel[◎] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	Square	Powerful Torsion (45°-60°)	-	Cobalt HSS	-	-

  From: 670,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  2-4-Flute Extra Long End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	-	-	2 ～ 4	-	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 795,792 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Extra Long Roughing End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	-	-	4 ～ 6	-	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 2,922,735 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S 2-Flute End Mill

  DYC

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 25	15 ～ 50	6 ～ 25	2	65 ～ 125	-	-	TiN / Non-Coated	Square	-	-	Cobalt HSS	-	-

  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S 4-Flute End Mill

  DYC

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 26	10 ～ 50	6 ～ 25	4	55 ～ 125	-	-	TiCN / TiN / Non-Coated	Square	-	-	Cobalt HSS	-	-

  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Pattern 2 Flute End Mill SLE-MT (SKH51)

  TAIYO-TOOL

  [Flute shape type]・ Square [Tool material type]· High-speed steel [Coating]・ Uncoated [Number of flutes]・ 2-flute

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1/2 ～ 51	30 ～ 65	-	2	119 ～ 235.5	-	-	Non-Coated	Square	-	-	High-speed steel	-	-

  From: 1,567,855 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Face Mill FM (HAP)

  TAIYO-TOOL

  [Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Flute No.] 2-Flute

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 6	10 ～ 15	6	2	50 ～ 55	-	-	Non-Coated	Square	-	-	High-speed steel	-	-

  From: 1,115,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	20 ～ 75	10 ～ 42	4 ～ 6	130 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	-	Square	Standard torsion (30-40°)	Available / None	Cobalt HSS	64 ～ 144	-

  From: 2,713,228 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Roughing End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 32	-	6 ～ 32	4 ～ 6	68 ～ 186	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiCN / Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 491,283 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute EXTRA Long End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 15	30 ～ 100	6 ～ 16	2	70 ～ 155	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 345,736 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute H.S.S End Mill (Uncoated/TIN/TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN / Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 220,258 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Long End Mill (TANK-POWER)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 26	55 ～ 90	12 ～ 25	4	115 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	-

  From: 1,061,540 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  [TiN Coat] Co-HSS 2-Blade End Mill EA824RA-12.0

  ESCO

  【Product Specifications】・Material-Co-HSS (cobalt high-speed steel), TiN coated・Tip dia.…12.0・Length…80・Shank dia.…12

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  -	-	-	-	-	-	-	-	-	-	-	-	-	-

  From: 1,417,517 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [TiN Coat] Co-HSS 2-Blade End Mill EA824RA-2.0

  ESCO

  【Product Specifications】・Material-Co-HSS (cobalt high-speed steel), TiN coated・Tip dia.…2.0・Length…50・Shank dia.…6

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  -	-	-	-	-	-	-	-	-	-	-	-	-	-

  From: 1,031,654 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,229,033 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,613,757 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,341,218 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,202,550 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,578,099 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,250,302 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 893,102 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·High speed steel powder roughing long flute length type that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,228,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·Long shank type of high speed steel powder that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,042,167 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	13 ～ 75	6 ～ 42	3 ～ 6	57 ～ 177	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 707,101 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	19 ～ 112	6 ～ 42	3 ～ 6	63 ～ 214	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 883,928 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	95 ～ 252	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,059,504 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	ASAHI TOOLS	EIKOSHA	YG 1	YG 1	YG 1	DYC	DYC	TAIYO-TOOL	TAIYO-TOOL	NACHI(FUJIKOSHI)	OSG KOREA CORP	OSG KOREA CORP	OSG KOREA CORP	YG 1	ESCO	ESCO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	SS2T S Coating S-TEC 2-Flute Short Flute	SS2TL S Coated Estech 2-Flute Long	KHB4TS Hybrid Short 4-Flute Blade	SS4T S Coating STEC 4-Flute Short	SS4TL S Coating S TECH 4-Flute Long Flute	LVS2T, 4-Flute Long Flute	SSML S Coated Estech Muscle 3-Flute Long	HiVA Powder High-Speed Steel High-Helix	HV4TLS 4-Flute Blade High Helix Long Shank	P-XαM P Coating Xα Nick Regular Flute	SSαLS S Coated Estech α Nick Long Shank	S-FPαL S-Coating Fine Pitch Long Flute	αS α Nick Short Flute	αM α Nick Regular Flute	αLα Nick Long Flute	αHM, α Nick Hard Type Regular Blade	αFS α Flat Nick Roughing Short Blade	HSP Long High Spiral End Mill G2	Ultra Long Shank End Mill with 4 Flutes EXLSE4	3-Flute 50°High Helix End Mill	2-4-Flute Extra Long End Mill	Extra Long Roughing End Mill	H.S.S 2-Flute End Mill	H.S.S 4-Flute End Mill	MT Pattern 2 Flute End Mill SLE-MT (SKH51)	Face Mill FM (HAP)	AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU	Long Roughing End Mill	2-Flute EXTRA Long End Mill	4-Flute H.S.S End Mill (Uncoated/TIN/TICN)	4-Flute Long End Mill (TANK-POWER)	[TiN Coat] Co-HSS 2-Blade End Mill EA824RA-12.0	[TiN Coat] Co-HSS 2-Blade End Mill EA824RA-2.0	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
From	697,174 VND	847,861 VND	838,222 VND	911,006 VND	947,098 VND	526,028 VND	1,205,036 VND	627,338 VND	2,131,653 VND	1,336,512 VND	2,871,712 VND	2,445,814 VND	793,873 VND	1,169,062 VND	2,697,418 VND	785,624 VND	1,160,448 VND	3,885,596 VND	3,631,640 VND	670,366 VND	795,792 VND	2,922,735 VND			1,567,855 VND	1,115,596 VND	2,713,228 VND	491,283 VND	345,736 VND	220,258 VND	1,061,540 VND	1,417,517 VND	1,031,654 VND	1,229,033 VND	1,613,757 VND	1,341,218 VND	1,202,550 VND	1,578,099 VND	1,250,302 VND	893,102 VND	1,228,408 VND	1,042,167 VND	707,101 VND	883,928 VND	1,059,504 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s)	7 Day(s)	7 Day(s)	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s)	9 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)	1 ～ 40	3 ～ 40	5 ～ 30	3 ～ 40	3 ～ 40	3 ～ 60	6 ～ 30	3 ～ 40	20 ～ 50	5 ～ 40	16 ～ 50	10 ～ 50	5 ～ 60	10 ～ 50	14 ～ 60	6 ～ 50	10 ～ 50	10 ～ 60	20 ～ 50	6 ～ 20	6 ～ 50	20 ～ 50	5 ～ 25	3 ～ 26	1/2 ～ 51	3 ～ 6	10 ～ 50	6 ～ 32	3 ～ 15	2 ～ 40	12 ～ 26	-	-	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	5 ～ 50	6 ～ 50	10 ～ 50
Blade length (ℓ)(mm)	2 ～ 65	15 ～ 105	15 ～ 55	10 ～ 65	15 ～ 105	20 ～ 300	25 ～ 105	8 ～ 65	55 ～ 90	15 ～ 100	40 ～ 75	45 ～ 150	10 ～ 95	35 ～ 120	65 ～ 300	15 ～ 110	25 ～ 80	10 ～ 200	30 ～ 100	13 ～ 38	-	-	15 ～ 50	10 ～ 50	30 ～ 65	10 ～ 15	20 ～ 75	-	30 ～ 100	8 ～ 65	55 ～ 90	-	-	19 ～ 68	45 ～ 90	11 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	13 ～ 75	19 ～ 112	45 ～ 150
Shank diameter (d)(mm)	6 ～ 32	6 ～ 32	8 ～ 25	6 ～ 32	6 ～ 32	6 ～ 42	8 ～ 32	6 ～ 32	16 ～ 42	6 ～ 32	16 ～ 42	10 ～ 42	6 ～ 42	10 ～ 42	16 ～ 42	6 ～ 42	10 ～ 42	10 ～ 42	20 ～ 42	6 ～ 20	-	-	6 ～ 25	6 ～ 25	-	6	10 ～ 42	6 ～ 32	6 ～ 16	6 ～ 32	12 ～ 25	-	-	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	10 ～ 42
Number of flutes(sheet)	2	2	4	4	4	4	3	2 ～ 4	4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4	3	2 ～ 4	4 ～ 6	2	4	2	2	4 ～ 6	4 ～ 6	2	4	4	-	-	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 6	4 ～ 6
Overall Length (L)(mm)	50 ～ 150	55 ～ 190	60 ～ 135	50 ～ 150	55 ～ 190	60 ～ 395	75 ～ 190	60 ～ 150	200 ～ 320	80 ～ 220	180 ～ 320	100 ～ 270	70 ～ 210	100 ～ 240	145 ～ 420	60 ～ 200	90 ～ 200	90 ～ 280	180 ～ 300	57 ～ 104	-	-	65 ～ 125	55 ～ 125	119 ～ 235.5	50 ～ 55	130 ～ 350	68 ～ 186	70 ～ 155	50 ～ 150	115 ～ 165	-	-	63 ～ 144	95 ～ 166	80 ～ 160	63 ～ 144	95 ～ 166	80 ～ 160	63 ～ 144	95 ～ 166	80 ～ 160	57 ～ 177	63 ～ 214	95 ～ 252
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	-	-	-	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	-	-	-	-	Side	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	TiCN	TiCN	For High Hardness (Silicon Group)	TiCN	TiCN	Non-Coated	TiCN	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	TiN / Non-Coated	TiCN / TiN / Non-Coated	Non-Coated	Non-Coated	-	TiCN / Non-Coated	Non-Coated	TiCN / Non-Coated	AG	-	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	-	-	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	Available / None	Available	Available	Available	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	-	-	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	27 ～ 115	10 ～ 65	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	64 ～ 144	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…