(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(16 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

ES-SSE2BSLT8-[71-309/1]

Rail Length L Rail Width W1 Assembly Height H Nominal Part Number No. of Blocks L Dimension Type type Block Type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)
35

40

45

55

70

75

85

95

100

110

115

120

130

135

145

150

155

160

170

175

190

195

205

215

220

230

235

245

250

255

265

270

275

280

295

310

315

320

335

345

350

355

370

375

390

395

415

420

430

435

445

455

470

475

495

510

515

520

535

545

550

555

570

575

590

595

615

620

630

635

645

670

695

710

720

745

750

770

790

795

820

830

845

870

895

910

920

945

950

970

990
[36-989/1mm Unit(s)]
ClearTrống
Rail Width W1(mm)
7

9

12

15
ClearTrống
Assembly Height H(mm)
8

10

13

16
ClearTrống
Nominal Part Number
7

9

12

15
ClearTrống
No. of Blocks
- 1
- 2
ClearTrống
L Dimension Type
- Configurable Type
- Selectable Type
ClearTrống
type
- ES-SSE2BLT
- ES-SSE2BSLT
- ES-SSE2BST
- ES-SSE2BT
- ES-SSEBLT
- ES-SSEBSLT
- ES-SSEBST
- ES-SSEBT
- ES-SSEL2BLT
- ES-SSEL2BT
- ES-SSELBLT
- ES-SSELBT
ClearTrống
Block Type
- Standard
  - Standard Block
- Short
  - Short Block
- Long
  - Long Block
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

4 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

ES Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks (Light Preload) [RoHS Compliant]

Name: ES Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks (Light Preload) [RoHS Compliant]
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

ES-SSE2BSLT8-[71-309/1]

ES-SSE2BSLT10-[96-634/1]

ES-SSE2BSLT13-[121-969/1]

ES-SSE2BSLT16-[151-989/1]

ES-SSE2BST8-[70,85,100,115,130,145,160,175,190,205,220,235,250,265,280,295,310]

ES-SSE2BST10-[95,115,135,155,175,195,215,235,255,275,295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]

ES-SSE2BST13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

ES-SSE2BST16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]

ES-SSEBSLT8-[41-309/1]

ES-SSEBSLT10-[36-634/1]

ES-SSEBSLT13-[46-969/1]

ES-SSEBSLT16-[71-989/1]

ES-SSEBST8-[40,55,70,85,100,115,130,145,160,175,190,205,220,235,250,265,280,295,310]

ES-SSEBST10-[35,55,75,95,115,135,155,175,195,215,235,255,275,295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]

ES-SSEBST13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

ES-SSEBST16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]

ES-SSE2BSLT8-[71-309/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

This Model is fully manufactured by MISUMI Group Factory in Vietnam.

Product Description

RoHS Compliant Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Min./Max. (mm.): 35 and 990
● Assembly Height (mm.): 8, 10, 13 and 16
● Block Type : Standard Block, Short / Long Block
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Product Type（Part No.）

Dimensional Drawing

Specification

Basic Rated Load / Others

Alterations

Accessories

Product Type（Part No.）

Material （Hardness） 1	Rail Length Type 2	Number of Blocks 3	Preload・PrecisionA			Assemble Height(H) B
			Light Preload
			High
			Short Block	Standard Block	Long Block
Stainless Steel ［SUS440C equivalent］（56HRC～）	Standard Length （Fixed）	1	ES-SSEBST	ES-SSEBT	ES-SSELBT	8 10 13 16
	Standard Length （Fixed）	2	ES-SSE2BST	ES-SSE2BT	ES-SSEL2BT
	1mm Increment （Specified）	1	ES-SSEBSLT	ES-SSEBLT	ES-SSELBLT
	1mm Increment （Specified）	2	ES-SSE2BSLT	ES-SSE2BLT	ES-SSEL2BLT

1Stainless Steel and fluoro-rubber are used for return caps and seals respectively.

2Standard Length of selectable length type (Fixed Length) can be checked "Standard Length (Fixed Length) List or here to refer
If the require rail length is not available in the selectable length type, please select the 1mm specification (specified size).

33 blocks and 4 blocks option is available. Please compete part no. of single block type, then andd [-B3] or [-B4] as alteration.

If you request more than5 blocks, please see details here.>>Click

!Operating Temperature for this prodcut is -20〜150℃. Filled with heat resistant grease（Du Pont KRYTOX GPL225)

[NG] Blocks or Rails are can't be purchased individually (sold as SET items)

Part No. example

Type	Height H		Rail Length L		Alterations
A	B
ES-SSEBST	10	-	275			（ES-SSEBST10-275）
ES-SSE2BLT	10	-	271	-	MC	（ES-SSE2BLT10-271-MC）
ES-SSEBSLT	10	-	271	-	MC-B4	（ES-SSEBSLT10-271-MC-B4）

Dimensional Drawing

Short Block Standard・Long Block ミニチュアリニアガイド　　耐熱用　ショートブロック／軽予圧:関連画像

[ ! ]Dimension "G" of L specified Type is not same as the value on the table below. Please refere to the chart.
[ NG ]Blocks or Rails are can't be purchased individually (sold as SET items)

■L Toleracen Unit：(mm)

L Category	Tolerance
25 ≦L≦ 400	0 -0.8
25 ≦L≦ 400	0 -0.8
400 <L≦ 1000	0 -1.0
400 <L≦ 1000	0 -1.0

■H・W₂Dimensional Accuracy

Product Category	Specifications	Assemblle Height H	Precision（μm）
Product Category	Specifications	Assemblle Height H	High
Miniature Linear Guide	Height H Tolerance	6～20	±20
	Pair Variation of Height H		15
	Width W₂Tolerance		±25
	Pair Variation of Width W₂		20

■Other Dimensional Tolerance

Range		Tolerance （mm）
Over	Or less	Tolerance （mm）
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8
1000	2000	±1.2

RJIS B 0405-1991 Grade m(medium) Compliant

[ ! ]Dimensional Accuracy and Preload(Clearance), see >>Click.

Specification

Block			L 4	Block Shape	Block Dimension								Rail Dimension
Type		H			W	L₁	B	C	S×ℓ	L₂	K	Cb	H₁	W₁	W₂	Ca	Counterbored	F	G 5
Single Block	2 Blocks	H			W	L₁	B	C	S×ℓ	L₂	K	Cb	H₁	W₁	W₂	Ca	d₁×d₂×h	F	G 5
Short ES-SSEBST ES-SSEBSLT Standard ES-SSEBT ES-SSEBLT Long ES-SSELBT ES-SSELBLT	Short ES-SSE2BST ES-SSE2BSLT Standard ES-SSE2BT ES-SSE2BLT Long ES-SSEL2BT ES-SSEL2BLT	8	40～310 （70）	Short	17	19.6	12	-	M2×2.5	9.6	6.5	0.3	4.7	7	5	0.3	2.4×4.2×2.3	15	5
				Standard		23.6		8		13.6
				Long		32		13		22
		10	35～635 （95）	Short	20	22.9	15	-	M3×3	11.9	7.8	0.3	5.5	9	5.5	0.3	3.5×6×3.5	20	7.5
			35～635 （95）	Standard		30		10		19
			55～635 （95）	Long		40		16		29
		13	45～970 （120）	Short	27	27	20	-	M3×3.5	13	10	0.5	7.5	12	7.5	0.5	3.5×6×4.5	25	10
			45～970 （120）	Standard		33.9		15		19.9
			70～970 （120）	Long		45.8		20		31.8
		16	70～990 （150）	Short	32	32.7	25	-	M3×4	17.7	12	0.5	9.5	15	8.5	0.5	3.5×6×4.5	40	15
			70～990 （150）	Standard		42.4		20		27.4
			110～990 （150）	Long		58.3		25		43.3

4(( )Dimension is the shortest Length for 2 blocks type

5Length Specified type are cut evenly on both side(left and right). In this case, G dimesnion will be different from the value in chart above. Calculation method: see below.>>click

!H8 size: Screws for mounting provided >>Cap Screw(M2x6）
Other size of Linear Guide has no screws attached. Here is reccomendable screws >>click

!Correctly align the datum planes (the sides with the straight grooves) of both the rail and block when installation. For details, see "Installation and handling" below.

Standard Length (Fixed Length) List

下The table below shows the list of selctable length.
Length which you can not find here is also available as "configurable length type" specified with 1mm increments.

Height ( H )	Rail Length ( L )


8	（40）	（55）	70	85	100	115	130	145	160	175	190	205	220	235	250	265	280	295	310
10	（35）	（55）	（75）	95	115	135	155	175	195	215	235	255	275	295	315	335	355	375	395	415	435	455	475	495	515	535	555	575	595	615	635
13	（45）	（70）	（95）	120	145	170	195	220	245	270	295	320	345	370	395	420	445	470	495	520	545	570	595	620	645	670	695	720	745	770	795	820	845	870	895	920	945	970
16	（70）	（110）	150	190	230	270	310	350	390	430	470	510	550	590	630	670	710	750	790	830	870	910	950	990

!( )This length is availalbe with single blocks type only.

Basic Rated Load / Allowalbe Static Moment / Mass

kgf=N×0.101972

Height (H)	Block Shape	Basic Rated Load7		Static Allowable Moment						Mass
		C（Dynamic） kN	Co（Static） kN	Single Block			2 Blocks used in close contatc8			Block kg	Guide Rail kg/m
		C（Dynamic） kN	Co（Static） kN	M_A N・m	M_B N・m	M_C N・m	M_A N・m	M_B N・m	M_C N・m	Block kg	Guide Rail kg/m
8	Short	0.702	1.27	1.9	1.6	4.6	12.4	12.4	9.2	0.008	0.19
	Standard	0.810	1.5	4.1	4.1	5.2	15.8	15.8	10.4	0.01
	Long	1.440	2.4	7.5	7.5	9.0	22.9	22.9	18.0	0.016
10	Short	1.044	1.68	3.1	2.6	7.9	23.4	23.4	15.8	0.015	0.31
	Standard	1.350	2.5	5.1	5.1	10.2	32.9	32.9	20.4	0.02
	Long	1.980	3.7	12.3	12.3	13.0	46.4	46.4	26.0	0.03
13	Short	1.476	2.38	5.2	4.4	14.8	38.1	38.1	29.6	0.025	0.61
	Standard	1.980	3.3	8.8	9.5	16.1	51.3	51.3	32.2	0.04
	Long	3.150	5.3	24.5	26.4	32.3	73.9	73.9	64.6	0.06
16	Short	2.772	4.23	12.3	10.3	32.6	85.4	85.4	65.2	0.05	1.02
	Standard	3.240	5.4	21.6	23.4	39.6	118.2	118.2	79.2	0.06
	Long	5.220	8.7	57.8	62.6	67.6	172.1	172.1	135.2	0.10

7The basic rated load is the same for the four directions that act on the block (radial direction, reverse radial direction, and lateral direction). It can be used in any position.

8The static allowable moment when two blocks are in close contact is a reference value, not a guaranteed value.

The allowable load and moment of the linear guide are determined by dividing each value (table above) by the static safety factor fs (table below).For details>>Click
ex）Under nomal operating condition: Allowalble load for H10 Type(kN) ⇒ 2.5/2＝1.25 （apploximately 128kg）

Static Safety Factor(fs lower limit)

Condition	fs lower limits
For normal operating condition	1～2
When smooth running performance is required	2～4
When variatoin and impact exist	3～5

Allowable load (N)≦ Co/fs
Allowable Moment (N・m)≦ (M_A,M_B,M_C)/fs

fs:Static Safety Factor　Co: Basic Static Rated Load
M_A,M_B,M_C: Allowable Static Moment(N・m)

Installation and Handling

■Datum Side and Mounting Direction

Datum side has Datum Plane Mark(Groove), see Figure Ａ. Blocks and Rails must have the same datum side when use.
Various Mounting Direction is availalbe having the same Basic Rated Load, see Figure B

(A)

(B)

■Precaution of use

Although the retaining wire prevents the balls from falling off, care must be taken when attaching and detaching the block. Click here for details>>click
If the block and rail are not used in original combination, radial clearance and accuracy cannot be guaranteed.
It is not possible to extend the length by adding rails on the same axis.This is because the assembly accuracy between the two cut surfaces is not guaranteed.
Dimensional Accurarcy of Linear Guides is guranteed after fixation of the rail ( Screw Mounting and pushed to the datum side）.
The rail bends before are forced by fixation. so there is no probelm in using it.

■About Grease

When shipping ES Linear Guides, Lithium Soap Grease（Kyodo Yushi Multemp PS2） is filled.
Other Brand's Grease is not reccomended to be filled. Please adopt the same brand&s grease for maintenance.
Grease can be pasted to the rail directly. Please run the blocks back and forth to blend in after pasting.

■Others

Lifetime calculation>>Click

Alterations

Code

Alterations

Specification

Precaution

MC
(Free of Charge)

Counterbored Hole-> Tapped Hole

・Change Rail Mounting hole from counterbored to Tapped Hole.
!Tapped Hole Specification

H	Tapped Hole
8	M 3
10	M 4
13	M 4
16	M 5

!This option can't be applied with length below.
H8: L 131mm or more
H10: L 276mm or more
H13: L471 mm or more
H16: L671mm or more

LLC
RLC

LLC：Left End Cut
RLC：Right End Cut

・Cut Rail End
・Rail is cut with the prodcut ID facing side( datum on other side)
・Please see cut length of each size below.

H	Cut L	N
10	2.5	5
13	5
16	10

!Overall length wll be shorter by cutting.
ex）ES-SSEBT13-95-LLC has L90mm.
!Applicable to Standard Length type only
!Not applicable to H8
!Not applicable to H10:L 35mm, H13: L 45mm.

B3
B4

B3：add blocks（total 3pcs）
B4：add blocks（total 4pcs）

3 blocks specification

4 blocks specification

・Shipped as 3 blocks (4 blocks) to single block type.
・Thehere are limits of rail length L
See "selectable shortest rail length" for details.

!Not applicable to H8
!ingle block part no need to be selected for this opiton and the case below is NG example( 2blocks type is selected)
（NG case: ES-SSE2BT10-215-B4）

Accessories

Height ( H )	Linear Guide Clamper	Miniature Linear Guide Height Adjusting Block
		S45C Equivalent Electroless Nickel Plating		Aluminum Alloy Clear Anodized
		S45C Equivalent Electroless Nickel Plating		Aluminum Alloy Clear Anodized
	For Standard Rail	Datum Side	Free Side	Datum Side	Free Side

8	―	GETA8	GETE8	AGETA8	AGETE8
10	―	GETA10	GETE10	AGETA10	AGETE10
13	SECK13	GETA13	GETE13	AGETA13	AGETE13
16	SECK16	GETA16	GETE16	AGETA16	AGETE16

!There is no bellows for MISUMI Linear Guides

■Accessories for Linear Guide

Clamping(Block Positioning)			Rail Fixation
			■Rail Push Plate for Fixation


Rail Height Adjustment Block
			■Linear Lock


Block fallout prevention
■Stopper bolt			■Linear Guide Lock

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
ES-SSE2BSLT8-[71-309/1]
ES-SSE2BSLT10-[96-634/1]
ES-SSE2BSLT13-[121-969/1]
ES-SSE2BSLT16-[151-989/1]
ES-SSE2BST8-[70,85,100,115,130,145,160,175,190,205,220,235,250,265,280,295,310]
ES-SSE2BST10-[95,115,135,155,175,195,215,235,255,275,295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
ES-SSE2BST13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
ES-SSE2BST16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]
ES-SSEBSLT8-[41-309/1]
ES-SSEBSLT10-[36-634/1]
ES-SSEBSLT13-[46-969/1]
ES-SSEBSLT16-[71-989/1]
ES-SSEBST8-[40,55,70,85,100,115,130,145,160,175,190,205,220,235,250,265,280,295,310]
ES-SSEBST10-[35,55,75,95,115,135,155,175,195,215,235,255,275,295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
ES-SSEBST13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
ES-SSEBST16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Block Type	Rail Width W1 (mm)	Assembly Height H (mm)	Nominal Part Number	No. of Blocks	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	L Dimension Type
-	1 Piece(s)	4 Day(s)	71 ～ 309	[Short] Short Block	7	8	7	2	702	1270	1.9	1.6	4.6	Configurable Type
-	1 Piece(s)	4 Day(s)	96 ～ 634	[Short] Short Block	9	10	9	2	1044	1680	3.1	2.6	7.9	Configurable Type
-	1 Piece(s)	4 Day(s)	121 ～ 969	[Short] Short Block	12	13	12	2	1467	2380	5.2	4.4	14.8	Configurable Type
-	1 Piece(s)	4 Day(s)	151 ～ 989	[Short] Short Block	15	16	15	2	2772	4230	12.3	10.3	32.6	Configurable Type
-	1 Piece(s)	4 Day(s)	70 ～ 310	[Short] Short Block	7	8	7	2	702	1270	1.9	1.6	4.6	Selectable Type
-	1 Piece(s)	4 Day(s)	95 ～ 635	[Short] Short Block	9	10	9	2	1044	1680	3.1	2.6	7.9	Selectable Type
-	1 Piece(s)	4 Day(s)	120 ～ 970	[Short] Short Block	12	13	12	2	1467	2380	5.2	4.4	14.8	Selectable Type
-	1 Piece(s)	4 Day(s)	150 ～ 990	[Short] Short Block	15	16	15	2	2772	4230	12.3	10.3	32.6	Selectable Type
-	1 Piece(s)	4 Day(s)	41 ～ 309	[Short] Short Block	7	8	7	1	702	1270	1.9	1.6	4.6	Configurable Type
-	1 Piece(s)	4 Day(s)	36 ～ 634	[Short] Short Block	9	10	9	1	1044	1680	3.1	2.6	7.9	Configurable Type
-	1 Piece(s)	4 Day(s)	46 ～ 969	[Short] Short Block	12	13	12	1	1467	2380	5.2	4.4	14.8	Configurable Type
-	1 Piece(s)	4 Day(s)	71 ～ 989	[Short] Short Block	15	16	15	1	2772	4230	12.3	10.3	32.6	Configurable Type
-	1 Piece(s)	4 Day(s)	40 ～ 310	[Short] Short Block	7	8	7	1	702	1270	1.9	1.6	4.6	Selectable Type
-	1 Piece(s)	4 Day(s)	35 ～ 635	[Short] Short Block	9	10	9	1	1044	1680	3.1	2.6	7.9	Selectable Type
-	1 Piece(s)	4 Day(s)	45 ～ 970	[Short] Short Block	12	13	12	1	1467	2380	5.2	4.4	14.8	Selectable Type
-	1 Piece(s)	4 Day(s)	70 ～ 990	[Short] Short Block	15	16	15	1	2772	4230	12.3	10.3	32.6	Selectable Type

Loading...Tải…

G Dimension

[G] Dimension of Length Specifified Type requires calculation.
Please refer to the below table and formula.
*[G] Dimension of Fixed Length: Please refer to the specification table. (no calculation required)

■ ES Miniature Linear Guide -Normal Rail Dimension-

Assemble Height H	6・8	10	13	16	20	# of Mounting Holes M
Rail Legth L	25～35	35～47	45～57	70～87	100～139	2
	36～50	48～67	58～82	88～127	140～199	3
	51～65	68～87	83～107	128～167	200～259	4
	66～80	88～107	108～132	168～207	240～319	5
	81～95	108～127	133～157	208～247	320～379	6
	96～110	128～147	158～182	248～287	380～439	7
	111～125	148～167	183～207	288～327	440～499	8
	126～140	168～187	208～232	328～367	500～559	9
	141～155	188～207	233～257	368～407	560～619	10
	156～170	208～227	258～282	408～447	620～679	11
	171～185	228～247	283～307	448～487	680～739	12
	186～200	248～267	308～332	488～527	740～799	13
	201～215	268～287	333～357	528～567	800～859	14
	216～230	288～307	358～382	568～607	860～919	15
	231～245	308～327	383～407	608～647	920～979	16
	246～260	328～347	408～432	648～687	980～1000	17
	261～275	348～367	433～457	688～727	－	18
	276～290	368～387	458～482	728～767	－	19
	291～305	388～407	483～507	768～807	－	20
	306～310	408～427	508～532	808～847	－	21
	－	428～447	533～557	848～887	－	22
	－	448～467	558～582	888～927	－	23
	－	468～487	583～607	928～967	－	24
	－	488～507	608～632	968～990	－	25
	－	508～527	633～657	－	－	26
	－	528～547	658～682	－	－	27
	－	548～567	683～707	－	－	28
	－	568～587	708～732	－	－	29
	－	588～607	733～757	－	－	30
	－	608～627	758～782	－	－	31
	－	628～635	783～807	－	－	32
	－	－	808～832	－	－	33
	－	－	833～857	－	－	34
	－	－	858～882	－	－	35
	－	－	883～907	－	－	36
	－	－	908～932	－	－	37
	－	－	933～957	－	－	38
	－	－	958～970	－	－	39
F Pitch of Mounting Hole	15	20	25	40	60

Basic InformationThông tin cơ bản

Rail Type	Standard Rail	Set / Single Item	Set	Preload	Light Preload
Accuracy Standards	High Grade	Material	Stainless Steel	Ball Arrangement	Miniature Type
Retainer	N/A	Lubrication Type	Lubrication Applied	Rolling Element	Ball
Surface Treatment	none	Lubrication Type	Filled with heat resistant grease（Du Pont KRYTOX GPL225)	Block Material	Stainless Steel
Material-Ball	Stainless Steel	Material-Return Cap	POM	Material-Retaining Wire	Stainless Steel
Material-Side Seal	Stainless Steel+Fluororubber

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)

Rail Width W1(mm)

Assembly Height H(mm)

Nominal Part Number

No. of Blocks

L Dimension Type

type

Block Type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

ES Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks (Light Preload) [RoHS Compliant]

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Product Type（Part No.）

Dimensional Drawing

Specification

Basic Rated Load / Allowalbe Static Moment / Mass

Alterations

Accessories

Part Number

G Dimension

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng