(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (ICT) 16/6/2024. We apologize for the inconvenience.
MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(214 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

FPSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

End Shape (Left)
- No Machining
- Tapped
- Threaded
- With Retaining Ring Grooves
- Tapped Hole
- Hex Socket
- Tapered
ClearTrống
End Shape (Right)
- No Machining
- Tapped
- Threaded
- With Retaining Ring Grooves
- Tapped Hole
- Hex Socket Hole
- Tapered
ClearTrống
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
ClearTrống
Surface Treatment
- Not Provided
- Hard Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
6

7

8

9

10

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

31

32

35

38

40

45

50
ClearTrống
Length L(mm)
[20-1500/0.5mm Unit(s)]
ClearTrống
Shaft Fit Tolerance
g6

h5
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
ClearTrống
B(mm)
[0-90/1mm Unit(s)]
ClearTrống
Coarse [M](mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
Coarse [N](mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
F(mm)
[0-250/0.5mm Unit(s)]
ClearTrống
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
ClearTrống
Fine Thread [PMS](mm)
10

12

14

18
ClearTrống
Fine Thread [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
ClearTrống
Fine Thread [QMS](mm)
10

12

14

18
ClearTrống
H(mm)
[1-1500/1mm Unit(s)]
ClearTrống
J(mm)
[5-32/1mm Unit(s)]
ClearTrống
P(mm)
[2-50/1mm Unit(s)]
ClearTrống
Q(mm)
[2-50/1mm Unit(s)]
ClearTrống
R(mm)
[5-40/1mm Unit(s)]
ClearTrống
S(mm)
[0-90/1mm Unit(s)]
ClearTrống
T(mm)
[0-250/0.5mm Unit(s)]
ClearTrống
U(mm)
[1-1500/1mm Unit(s)]
ClearTrống
W(mm)
[6-25/1mm Unit(s)]
ClearTrống
Z(mm)
[5-32/1mm Unit(s)]
ClearTrống
type
- FPSFJAA
- FPSFJAB
- FPSFJAC
- FPSFJAD
- FPSFJAE
- FPSFJAF
- FPSFJAG
- FPSFJAH
- FPSFJAT
- FPSFJBA
- FPSFJBB
- FPSFJBC
- FPSFJBD
- FPSFJBE
- FPSFJBF
- FPSFJBG
- FPSFJBH
- FPSFJBT
- FPSFJCA
- FPSFJCB
- FPSFJCC
- FPSFJCD
- FPSFJCE
- FPSFJCF
- FPSFJCG
- FPSFJCH
- FPSFJCT
- FPSFJDA
- FPSFJDB
- FPSFJDC
- FPSFJDD
- FPSFJDE
- FPSFJDF
- FPSFJDG
- FPSFJDH
- FPSFJDT
- FPSFJEA
- FPSFJEB
- FPSFJEC
- FPSFJED
- FPSFJEE
- FPSFJEF
- FPSFJEG
- FPSFJEH
- FPSFJET
- FPSFJFA
- FPSFJFB
- FPSFJFC
- FPSFJFD
- FPSFJFE
- FPSFJFF
- FPSFJFG
- FPSFJFH
- FPSFJFT
- FPSFJGA
- FPSFJGB
- FPSFJGC
- FPSFJGD
- FPSFJGE
- FPSFJGF
- FPSFJGG
- FPSFJGH
- FPSFJGT
- FPSFJHA
- FPSFJHB
- FPSFJHC
- FPSFJHD
- FPSFJHE
- FPSFJHF
- FPSFJHG
- FPSFJHH
- FPSFJHT
- FPSFJTA
- FPSFJTB
- FPSFJTC
- FPSFJTD
- FPSFJTE
- FPSFJTF
- FPSFJTG
- FPSFJTH
- FPSFJTT
- FPSSFJAA
- FPSSFJAB
- FPSSFJAC
- FPSSFJAD
- FPSSFJAE
- FPSSFJAF
- FPSSFJAG
- FPSSFJAH
- FPSSFJAT
- FPSSFJBA
- FPSSFJBB
- FPSSFJBC
- FPSSFJBD
- FPSSFJBE
- FPSSFJBF
- FPSSFJBG
- FPSSFJBH
- FPSSFJBT
- FPSSFJCA
- FPSSFJCB
- FPSSFJCC
- FPSSFJCD
- FPSSFJCE
- FPSSFJCF
- FPSSFJCG
- FPSSFJCH
- FPSSFJCT
- FPSSFJDA
- FPSSFJDB
- FPSSFJDC
- FPSSFJDD
- FPSSFJDE
- FPSSFJDF
- FPSSFJDG
- FPSSFJDH
- FPSSFJDT
- FPSSFJEA
- FPSSFJEB
- FPSSFJEC
- FPSSFJED
- FPSSFJEE
- FPSSFJEF
- FPSSFJEG
- FPSSFJEH
- FPSSFJET
- FPSSFJFA
- FPSSFJFB
- FPSSFJFC
- FPSSFJFD
- FPSSFJFE
- FPSSFJFF
- FPSSFJFG
- FPSSFJFH
- FPSSFJFT
- FPSSFJGA
- FPSSFJGB
- FPSSFJGC
- FPSSFJGD
- FPSSFJGE
- FPSSFJGF
- FPSSFJGG
- FPSSFJGH
- FPSSFJGT
- FPSSFJHA
- FPSSFJHB
- FPSSFJHC
- FPSSFJHD
- FPSSFJHE
- FPSSFJHF
- FPSSFJHG
- FPSSFJHH
- FPSSFJHT
- FPSSFJTA
- FPSSFJTB
- FPSSFJTC
- FPSSFJTD
- FPSSFJTE
- FPSSFJTF
- FPSSFJTG
- FPSSFJTH
- FPSSFJTT
- FSFJAA
- FSFJAB
- FSFJAC
- FSFJAD
- FSFJAE
- FSFJAF
- FSFJAG
- FSFJAH
- FSFJAT
- FSFJBA
- FSFJBB
- FSFJBC
- FSFJBD
- FSFJBE
- FSFJBF
- FSFJBG
- FSFJBH
- FSFJBT
- FSFJCA
- FSFJCB
- FSFJCC
- FSFJCD
- FSFJCE
- FSFJCF
- FSFJCG
- FSFJCH
- FSFJCT
- FSFJDA
- FSFJDB
- FSFJDC
- FSFJDD
- FSFJDE
- FSFJDF
- FSFJDG
- FSFJDH
- FSFJDT
- FSFJEA
- FSFJEB
- FSFJEC
- FSFJED
- FSFJEE
- FSFJEF
- FSFJEG
- FSFJEH
- FSFJET
- FSFJFA
- FSFJFB
- FSFJFC
- FSFJFD
- FSFJFE
- FSFJFF
- FSFJFG
- FSFJFH
- FSFJFT
- FSFJGA
- FSFJGB
- FSFJGC
- FSFJGD
- FSFJGE
- FSFJGF
- FSFJGG
- FSFJGH
- FSFJGT
- FSFJHA
- FSFJHB
- FSFJHC
- FSFJHD
- FSFJHE
- FSFJHF
- FSFJHG
- FSFJHH
- FSFJHT
- FSFJTA
- FSFJTB
- FSFJTC
- FSFJTD
- FSFJTE
- FSFJTF
- FSFJTG
- FSFJTH
- FSFJTT
- FSFUAA
- FSFUAB
- FSFUAC
- FSFUAD
- FSFUAE
- FSFUAF
- FSFUAG
- FSFUAH
- FSFUAT
- FSFUBA
- FSFUBB
- FSFUBC
- FSFUBD
- FSFUBE
- FSFUBF
- FSFUBG
- FSFUBH
- FSFUBT
- FSFUCA
- FSFUCB
- FSFUCC
- FSFUCD
- FSFUCE
- FSFUCF
- FSFUCG
- FSFUCH
- FSFUCT
- FSFUDA
- FSFUDB
- FSFUDC
- FSFUDD
- FSFUDE
- FSFUDF
- FSFUDG
- FSFUDH
- FSFUDT
- FSFUEA
- FSFUEB
- FSFUEC
- FSFUED
- FSFUEE
- FSFUEF
- FSFUEG
- FSFUEH
- FSFUET
- FSFUFA
- FSFUFB
- FSFUFC
- FSFUFD
- FSFUFE
- FSFUFF
- FSFUFG
- FSFUFH
- FSFUFT
- FSFUGA
- FSFUGB
- FSFUGC
- FSFUGD
- FSFUGE
- FSFUGF
- FSFUGG
- FSFUGH
- FSFUGT
- FSFUHA
- FSFUHB
- FSFUHC
- FSFUHD
- FSFUHE
- FSFUHF
- FSFUHG
- FSFUHH
- FSFUHT
- FSFUTA
- FSFUTB
- FSFUTC
- FSFUTD
- FSFUTE
- FSFUTF
- FSFUTG
- FSFUTH
- FSFUTT
- FSSFJAA
- FSSFJAB
- FSSFJAC
- FSSFJAD
- FSSFJAE
- FSSFJAF
- FSSFJAG
- FSSFJAH
- FSSFJAT
- FSSFJBA
- FSSFJBB
- FSSFJBC
- FSSFJBD
- FSSFJBE
- FSSFJBF
- FSSFJBG
- FSSFJBH
- FSSFJBT
- FSSFJCA
- FSSFJCB
- FSSFJCC
- FSSFJCD
- FSSFJCE
- FSSFJCF
- FSSFJCG
- FSSFJCH
- FSSFJCT
- FSSFJDA
- FSSFJDB
- FSSFJDC
- FSSFJDD
- FSSFJDE
- FSSFJDF
- FSSFJDG
- FSSFJDH
- FSSFJDT
- FSSFJEA
- FSSFJEB
- FSSFJEC
- FSSFJED
- FSSFJEE
- FSSFJEF
- FSSFJEG
- FSSFJEH
- FSSFJET
- FSSFJFA
- FSSFJFB
- FSSFJFC
- FSSFJFD
- FSSFJFE
- FSSFJFF
- FSSFJFG
- FSSFJFH
- FSSFJFT
- FSSFJGA
- FSSFJGB
- FSSFJGC
- FSSFJGD
- FSSFJGE
- FSSFJGF
- FSSFJGG
- FSSFJGH
- FSSFJGT
- FSSFJHA
- FSSFJHB
- FSSFJHC
- FSSFJHD
- FSSFJHE
- FSSFJHF
- FSSFJHG
- FSSFJHH
- FSSFJHT
- FSSFJTA
- FSSFJTB
- FSSFJTC
- FSSFJTD
- FSSFJTE
- FSSFJTF
- FSSFJTG
- FSSFJTH
- FSSFJTT
- FSSFUAA
- FSSFUAB
- FSSFUAC
- FSSFUAD
- FSSFUAE
- FSSFUAF
- FSSFUAG
- FSSFUAH
- FSSFUAT
- FSSFUBA
- FSSFUBB
- FSSFUBC
- FSSFUBD
- FSSFUBE
- FSSFUBF
- FSSFUBG
- FSSFUBH
- FSSFUBT
- FSSFUCA
- FSSFUCB
- FSSFUCC
- FSSFUCD
- FSSFUCE
- FSSFUCF
- FSSFUCG
- FSSFUCH
- FSSFUCT
- FSSFUDA
- FSSFUDB
- FSSFUDC
- FSSFUDD
- FSSFUDE
- FSSFUDF
- FSSFUDG
- FSSFUDH
- FSSFUDT
- FSSFUEA
- FSSFUEB
- FSSFUEC
- FSSFUED
- FSSFUEE
- FSSFUEF
- FSSFUEG
- FSSFUEH
- FSSFUET
- FSSFUFA
- FSSFUFB
- FSSFUFC
- FSSFUFD
- FSSFUFE
- FSSFUFF
- FSSFUFG
- FSSFUFH
- FSSFUFT
- FSSFUGA
- FSSFUGB
- FSSFUGC
- FSSFUGD
- FSSFUGE
- FSSFUGF
- FSSFUGG
- FSSFUGH
- FSSFUGT
- FSSFUHA
- FSSFUHB
- FSSFUHC
- FSSFUHD
- FSSFUHE
- FSSFUHF
- FSSFUHG
- FSSFUHH
- FSSFUHT
- FSSFUTA
- FSSFUTB
- FSSFUTC
- FSSFUTD
- FSSFUTE
- FSSFUTF
- FSSFUTG
- FSSFUTH
- FSSFUTT
ClearTrống
Basic Shape
- Solid
- One End Stepped
- Both Ends Stepped
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

8 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Shafts - Shaft Ends Configurable

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

FPSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]

FPSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]

FPSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]

FPSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]

FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]

FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]

FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]

FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]

FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]

FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]

FPSFJDA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]

FPSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]

FPSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]

FPSFJDF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-U[1-1500/1]-P[2-50/1]

FPSFJDG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]

FPSFJDH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[4,5,6,8,10]-P[2-50/1]-W[6-25/1]

FPSFJDT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-P[2-19/1]-Z[5-32/1]

FPSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]

FPSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]

FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]

FPSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Combination of both ends' shapes unavailable for standard products becomes available.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
FPSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FPSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]
FPSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJDA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSFJDF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-U[1-1500/1]-P[2-50/1]
FPSFJDG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSFJDH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[4,5,6,8,10]-P[2-50/1]-W[6-25/1]
FPSFJDT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-P[2-19/1]-Z[5-32/1]
FPSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMS[10,12,14,18]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSFJEF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]-P[2-50/1]
FPSFJEG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSFJEH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[4,5,6,8,10,12]-P[2-50/1]-W[6-24/1]
FPSFJET-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-M[3,4,5,6,8,10,12]-P[2-19/1]-Z[5-32/1]
FPSFJFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-H[1-1500/1]-Q[2-50/1]
FPSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1]
FPSFJGD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FPSFJGE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSFJHD-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]-R[5-40/1]
FPSFJHE-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]-R[5-40/1]
FPSFJTD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-Q[2-19/1]-J[5-32/1]
FPSFJTE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-N[3,4,5,6,8,10,12]-Q[2-19/1]-J[5-32/1]
FPSSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FPSSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]
FPSSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJDA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-S[0-90/1]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-P[2-50/1]
FPSSFJDF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-U[1-1500/1]-P[2-50/1]
FPSSFJDG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSSFJDH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[4,5,6,8,10]-P[2-50/1]-W[6-25/1]
FPSSFJDT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-P[2-19/1]-Z[5-32/1]
FPSSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMS[10,12,14,18]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSSFJEF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]-P[2-50/1]
FPSSFJEG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Basic Shape	End Shape (Left)	End Shape (Right)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Coarse [M] (mm)	Coarse [N] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	Fine Thread [QMC] (mm)	Fine Thread [QMS] (mm)	H (mm)	J (mm)	P (mm)	Q (mm)	R (mm)	S (mm)	T (mm)	U (mm)	W (mm)	Z (mm)
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	-	3 ～ 30	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 90	-	3 ～ 30	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	With Retaining Ring Grooves	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	1 ～ 1500	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Hex Socket Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 10	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	6 ～ 25	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapered	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	2 ～ 95	-	-	-	-	-	-	2 ～ 19	-	-	-	-	-	-	5 ～ 32
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	3 ～ 30	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	10 ～ 18	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	With Retaining Ring Grooves	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	1 ～ 1500	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Hex Socket Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapped Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	4 ～ 12	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	6 ～ 24	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapered	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	3 ～ 12	-	2 ～ 95	-	-	-	-	-	-	2 ～ 19	-	-	-	-	-	-	5 ～ 32
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	With Retaining Ring Grooves	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	With Retaining Ring Grooves	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	-	-	-	-	-	1 ～ 1500	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Hex Socket	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Hex Socket	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped Hole	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	3 ～ 30	-	-	-	-	-	-	-	-	-	2 ～ 50	5 ～ 40	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped Hole	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	4 ～ 12	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	5 ～ 40	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapered	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	5 ～ 32	-	2 ～ 19	-	-	2 ～ 95	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapered	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	3 ～ 12	-	-	-	-	-	-	5 ～ 32	-	2 ～ 19	-	-	2 ～ 95	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	0 ～ 250	-	-	3 ～ 30	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	0 ～ 250	-	-	-	10 ～ 18	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	1 ～ 1500	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	4 ～ 10	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	6 ～ 25	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	No Machining	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	-	-	-	2 ～ 95	-	-	-	-	-	-	2 ～ 19	-	-	-	-	-	-	5 ～ 32
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	3 ～ 30	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	0 ～ 250	-	-	-	10 ～ 18	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	1 ～ 1500	-	-
-	1 Piece(s)	11 Day(s) or more	10	One End Stepped	Tapped	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	3 ～ 30	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-

Loading...Tải…

Basic InformationThông tin cơ bản

Shaft End Perpendicularity	Perpendicularity (0.2)	Heat Treatment	Induction Hardened

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

MISUMI Unit Example related to this product

back next

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

TALK

TALK ID : Misumi_vn

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

End Shape (Left)

End Shape (Right)

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

B(mm)

Coarse [M](mm)

Coarse [N](mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

Fine Thread [QMC](mm)

Fine Thread [QMS](mm)

H(mm)

J(mm)

P(mm)

Q(mm)

R(mm)

S(mm)

T(mm)

U(mm)

W(mm)

Z(mm)

type

Basic Shape

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Shafts - Shaft Ends Configurable

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

MISUMI Unit Example related to this product

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース