(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(4,266 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-J[4,5,6,8,10,12]

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Basic Shape
- One End Stepped
- Both Ends Stepped
ClearTrống
End Shape (Right)
- No Machining
- Tapped
- Threaded
ClearTrống
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
ClearTrống
Surface Treatment
- Not Provided
- Low Temperature Black Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30
ClearTrống
Length L(mm)
[25-445/1mm Unit(s)]
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
ClearTrống
Add Wrench Flats at One Location [SC](mm)
[0-435/1mm Unit(s)]
ClearTrống
B(mm)
0
[3-72/1mm Unit(s)]
ClearTrống
Change Tapped Thread J to Fine One [JSC](mm)
8

10

12

14

18
ClearTrống
Change Thread M to Fine One [MMC](mm)
3

4

5

6

8

10

12

15

17

20

25
ClearTrống
Change Thread M to Fine One [MMS](mm)
10

12

14

18
ClearTrống
Change Thread N to Fine One [NMC](mm)
3

4

5

6

8

10

12

15

17

20

25
ClearTrống
Change Thread N to Fine One [NMS](mm)
10

12

14

18
ClearTrống
F(mm)
[5-145/1mm Unit(s)]
ClearTrống
P(mm)
3

4

5

6

7
[4-29/1mm Unit(s)]
ClearTrống
Q(mm)
3

4

5

6

7
[4-29/1mm Unit(s)]
ClearTrống
S(mm)
0
[3-72/1mm Unit(s)]
ClearTrống
T(mm)
[5-145/1mm Unit(s)]
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J](mm)
2

2.6

3

4

5

6

8

10

12

15

16

20
ClearTrống
Threaded (Coarse) [M](mm)
0

3

4

5

6

8

10

12

16

20

24
ClearTrống
Threaded (Coarse) [N](mm)
0

3

4

5

6

8

10

12

16

20

24
ClearTrống
type
- VFAD
- VFAM
- VFAN
- VFPD
- VFPM
- VFPN
- VRAD
- VRAM
- VRAN
- VRPD
- VRPM
- VRPN
- VSFAD
- VSFAM
- VSFAN
- VSFPD
- VSFPM
- VSFPN
- VSRAD
- VSRAM
- VSRAN
- VSRPD
- VSRPM
- VSRPN
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

7 Day(s) or Less

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped (Part Number)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-J[4,5,6,8,10,12]

VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-M[8,10,12,16,20]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-M[8,10,12,16,20]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMC[8,10,12,15,17,20]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMC[8,10,12,15,17,20]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMS[10,12,14,18]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-M[8,10,12,16,20]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-M[8,10,12,16,20]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMC[8,10,12,15,17,20]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMC[8,10,12,15,17,20]-JSC[8,10,12,14,18]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMS[10,12,14,18]-J[4,5,6,8,10,12,16]

VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-J[6,8,10,12,15,16,20]

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-JSC[8,10,12,14,18]

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-MMC25

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-J[6,8,10,12,15,16,20]

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-JSC[8,10,12,14,18]

VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-MMC25

VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-J[4,5,6,8,10,12]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02.One end stepped, one end male thread/both ends female thread/one end Male thread/one end female thread/with spanner groove.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-J[4,5,6,8,10,12]
VFAD20-[25-442/1]-F[5-95/1]-B[6-48/1]-P[6-19/1]-MMS[10,12,14]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-M[8,10,12,16,20]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-M[8,10,12,16,20]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMC[8,10,12,15,17,20]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMC[8,10,12,15,17,20]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMS[10,12,14,18]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B0-P[8-24/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-M[8,10,12,16,20]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-M[8,10,12,16,20]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMC[8,10,12,15,17,20]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMC[8,10,12,15,17,20]-JSC[8,10,12,14,18]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMS[10,12,14,18]-J[4,5,6,8,10,12,16]
VFAD25-[25-442/1]-F[5-120/1]-B[8-60/1]-P[8-24/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-M[0,8,10,12,16,20,24]-MMC25
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMC[8,10,12,15,17,20,25]-MMC25
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMS[10,12,14,18]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B0-P[8-29/1]-MMS[10,12,14,18]-MMC25
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-M[0,8,10,12,16,20,24]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-M[0,8,10,12,16,20,24]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-M[0,8,10,12,16,20,24]-MMC25
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMC[8,10,12,15,17,20,25]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMC[8,10,12,15,17,20,25]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMC[8,10,12,15,17,20,25]-MMC25
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMS[10,12,14,18]-J[6,8,10,12,15,16,20]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMS[10,12,14,18]-JSC[8,10,12,14,18]
VFAD30-[25-442/1]-F[5-145/1]-B[8-72/1]-P[8-29/1]-MMS[10,12,14,18]-MMC25
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-M[0,3]-T[5-15/1]-S0-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-M[0,3]-T[5-15/1]-S0-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-M[0,3]-T[5-15/1]-S[3-9/1]-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-M[0,3]-T[5-15/1]-S[3-9/1]-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-MMC3-T[5-15/1]-S0-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-MMC3-T[5-15/1]-S0-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-MMC3-T[5-15/1]-S[3-9/1]-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B0-P3-MMC3-T[5-15/1]-S[3-9/1]-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-M[0,3]-T[5-15/1]-S0-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-M[0,3]-T[5-15/1]-S0-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-M[0,3]-T[5-15/1]-S[3-9/1]-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-M[0,3]-T[5-15/1]-S[3-9/1]-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-T[5-15/1]-S0-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-T[5-15/1]-S0-Q3-NMC3
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-T[5-15/1]-S[3-9/1]-Q3-N[0,3]
VFAM4-[25-190/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-T[5-15/1]-S[3-9/1]-Q3-NMC3
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-M[3,4]-T[5-20/1]-S0-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-M[3,4]-T[5-20/1]-S0-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-M[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-M[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-MMC[3,4]-T[5-20/1]-S0-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-MMC[3,4]-T[5-20/1]-S0-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-MMC[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B0-P[3,4]-MMC[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-M[3,4]-T[5-20/1]-S0-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-M[3,4]-T[5-20/1]-S0-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-M[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-M[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-MMC[3,4]-T[5-20/1]-S0-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-MMC[3,4]-T[5-20/1]-S0-Q[3,4]-NMC[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-MMC[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-N[3,4]
VFAM5-[25-290/1]-F[5-20/1]-B[3-12/1]-P[3,4]-MMC[3,4]-T[5-20/1]-S[3-12/1]-Q[3,4]-NMC[3,4]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-M[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-M[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-M[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-M[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-M[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-M[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-M[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-M[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S0-Q[3,4,5]-NMC[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-N[3,4,5]
VFAM6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-MMC[3,4,5]-T[5-25/1]-S[3-12/1]-Q[3,4,5]-NMC[3,4,5]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Basic Shape	End Shape (Right)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	Change Tapped Thread J to Fine One [JSC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J] (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	20	25 ～ 442	Induction Hardened (58HRC~)	-	6 ～ 48	-	-	10 ～ 14	-	-	5 ～ 95	6 ～ 19	-	-	-	4 ～ 12	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	20	25 ～ 442	Induction Hardened (58HRC~)	-	6 ～ 48	8 ～ 18	-	10 ～ 14	-	-	5 ～ 95	6 ～ 19	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	8 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	-	-	-	-	5 ～ 120	8 ～ 24	-	-	-	-	8 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	8 ～ 20	-	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	8 ～ 20	-	-	-	5 ～ 120	8 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	-	10 ～ 18	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	-	10 ～ 18	-	-	5 ～ 120	8 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	-	-	-	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	8 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	8 ～ 18	-	-	-	-	5 ～ 120	8 ～ 24	-	-	-	-	8 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	-	8 ～ 20	-	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	8 ～ 18	8 ～ 20	-	-	-	5 ～ 120	8 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	-	-	10 ～ 18	-	-	5 ～ 120	8 ～ 24	-	-	-	4 ～ 16	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	25	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 60	8 ～ 18	-	10 ～ 18	-	-	5 ～ 120	8 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	-	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	-	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	8 ～ 18	-	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	0	-	25	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	-	-	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	8 ～ 18	-	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	0 ～ 24	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	8 ～ 18	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	8 ～ 25	-	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	-	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	6 ～ 20	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	8 ～ 18	-	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	One End Stepped	Tapped	[Steel] SUJ2 Equivalent	Not Provided	30	25 ～ 442	Induction Hardened (58HRC~)	-	8 ～ 72	-	25	10 ～ 18	-	-	5 ～ 145	8 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 15	3	3	0	5 ～ 15	-	0 ～ 3	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	-	-	3	-	5 ～ 15	3	3	0	5 ～ 15	-	0 ～ 3	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	0 ～ 3	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	-	-	3	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	0 ～ 3	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	3	-	-	-	5 ～ 15	3	3	0	5 ～ 15	-	-	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	3	-	3	-	5 ～ 15	3	3	0	5 ～ 15	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	3	-	-	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	-	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	0	-	3	-	3	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	-	-	-	-	5 ～ 15	3	3	0	5 ～ 15	-	0 ～ 3	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	-	-	3	-	5 ～ 15	3	3	0	5 ～ 15	-	0 ～ 3	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	-	-	-	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	0 ～ 3	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	-	-	3	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	0 ～ 3	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	3	-	-	-	5 ～ 15	3	3	0	5 ～ 15	-	-	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	3	-	3	-	5 ～ 15	3	3	0	5 ～ 15	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	3	-	-	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	-	0 ～ 3
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	4	25 ～ 190	Induction Hardened (58HRC~)	-	3 ～ 9	-	3	-	3	-	5 ～ 15	3	3	3 ～ 9	5 ～ 15	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	3 ～ 4	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	3 ～ 4	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	3 ～ 4	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	3 ～ 4	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	3 ～ 4	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	-	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	3 ～ 4	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	3 ～ 4	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	-	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	0	-	3 ～ 4	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	3 ～ 4	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	3 ～ 4	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	3 ～ 4	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	3 ～ 4	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 4	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	-	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 4	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	0	5 ～ 20	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 4	-	-	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	-	3 ～ 4
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	5	25 ～ 290	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 4	-	3 ～ 4	-	5 ～ 20	3 ～ 4	3 ～ 4	3 ～ 12	5 ～ 20	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	3 ～ 5	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	3 ～ 5	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	3 ～ 5	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	3 ～ 5	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 5	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	-	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 5	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 5	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	-	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 5	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	3 ～ 5	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	3 ～ 5	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	3 ～ 5	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	-	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	3 ～ 5	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 5	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	-	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 5	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	0	5 ～ 25	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 5	-	-	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	-	3 ～ 5
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	6	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 12	-	3 ～ 5	-	3 ～ 5	-	5 ～ 25	3 ～ 5	3 ～ 5	3 ～ 12	5 ～ 25	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	3 ～ 6	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	-	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	3 ～ 6	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	-

Loading...Tải…

Basic InformationThông tin cơ bản

End Shape (Left)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.03)	Heat Treatment	Induction Hardened
Shaft Fit Tolerance	g6

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

MISUMI Unit Example related to this product

back next

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

TALK

TALK ID : Misumi_vn

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Basic Shape

End Shape (Right)

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

Change Tapped Thread J to Fine One [JSC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J](mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped (Part Number)

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

MISUMI Unit Example related to this product

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース