Air Tube/Nylon Tube

Polyurethane Tubing TIUB/ TU Series

SMC

Polyurethane Tubing TIUB/ TU SeriesPolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter Minimum/Maximum (mm.) : 3.18 to 16● Inner Diameter (mm.) : 2, 2.5, 4, 5, 6.5, 8 and 10● Length (m.) : 100, 200, 400 and 500● Maximum operating pressure (MPa) : at 20°C = 0.8 , at 40°C = 0.65 and at 60°C = 0.5● Operating Temperature Range (℃) : Air -20 to +60°C, Water: 0 to 40°C (No freezing)● Material : Polyurethane● Color : 21 colors[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

Nylon Tube, for Multipurpose Application Piping, N2

NITTA

[Features]・ Excellent oil resistance and chemical resistance・ Group 2 types can be used up to 4.8 MPa (at 20 °C)・ It has excellent abrasion resistance

Tubes/Water Resisting Polyurethane

MISUMI

Tubes/Water Resisting PolyurethanePolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10, 12 and 16● Inner Diameter (mm.) : 1.8, 2.5, 4, 5, 6.5, 8 and 11● Length (m.) : 20, 100 and can configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Maximum operating pressure (MPa) : 0.8● Operating Temperature Range (℃) : -5 to 60● Material : Polyurethane● Color : Black, White, Red, Blue, Yellow, Green and Transparent and Transparent Blue[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Nylon Tubing T/TIA Series

SMC

Nylon tubing for general pneumatic tubing.[Features]・ Maximum operating pressure of 3.0 MPa or less (T0604, at 20°C)[Applications]・ Applicable fluids: Air, water

Straight Polyurethane Tubes for General Piping

PISCO

Urethane tube with superior flexibility.[Features]· Excellent flexibility.· Ideal for general pressure pipes that need a small bend radius.· Many tube colors.· A cut mark is displayed at intervals of 500mm, which is useful when cutting the tube.· We also manufacture long length tubes by custom order.

Soft Polyurethane Tubing TUS Series

SMC

Extremely flexible soft polyurethane tubing.[Features]・ Piping in a narrow space is possible・ Maximum operating pressure of 0.6 MPa or less (At 20°C)

Tube Cutter TK Series

SMC

Tube-related products suitable for cutting tubes. [Features]· TK-1: Without crushes and/or burrs, perpendicular cutting, reduced operating force, safety lock included.· TK-2: Possible to cut a tube up to 18 mm.· TK-3: Safety lock included, blade is replaceable.

Fluoropolymer Tubing (FEP) TH/TIH Series

SMC

A fluoropolymer tubing with superior durability in chemical environments. [Features]· Compatible with Japan's Food Sanitation Law.· Operating temperature: 200°C (varies depending on the conditions).· RoHS compliant.· Maximum operating pressure 2.3 MPa or less (at 20°C) (varies by size).· Complies with the FDA (Food and Drug Administration) §177-1550 dissolution test.

Flame Retardant (Equivalent To UL-94 Standard V-0) FR Double Layer Polyurethane Tubing TRBU Series

SMC

Double-layer polyurethane tubing. [Features]· Maximum operating pressure 0.8 MPa or less (at 20°C).· For use in areas where spatter occurs. Flame retardant (equivalent to UL-94 standard V-0).· Superior resiliency even when compared to nylon tubing.

Fluoropolymer Tubing TL/TIL Series

SMC

Fluoropolymer tubing with a highly smooth internal surface. [Features]· Maximum operating pressure 1.0 MPa or less (at 20°C).· Maximum operating temperature: 260°C (varies depending on the conditions). [Applications]· Suitable for applications requiring a small amount of elution of fluorine ions.

Polyurethane Coil Tubing TCU Series

SMC

Flexible tubing that can be used for compact piping. [Features]· Flexible.· Makes compact piping possible.· Fluid: air.· Maximum operating pressure: 0.8 MPa or less (at 20°C). [Applications]· For piping in movable parts.

Wear Resistant Tubing TUZ Series

SMC

Wear Resistant Tubing TUZ SeriesPolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10, 12 and 16● Inner Diameter (mm.) : 2, 2.5, 4, 5, 6.5, 8 and 10● Length (m.) : 20 and 100● Maximum operating pressure (MPa) : at 20°C = 0.8● Operating Temperature Range (℃) : Air -20 to +60°C, Water: 0 to 40°C (No freezing)● Material : Special Polyurethane● Color : Black, Milky White, Red, Blue, Yellow and Green[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

Silicone Tube 10 m/20 m (The Length Can Be Specified in Increments of 0.5 mm)

MISUMI

Silicone Tube 10 m/20 m (The Length Can Be Specified in Increments of 0.5 mm)These Tubes are compliant with the Food Sanitation Act of Japan, They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2, 4, 6, 8 and 9● Length (m.) : 10, 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Applicable Fluid : Water● Material : Silicone Tube● Color : Milky White[Application]This Silicone Tube is used in a food industry

• Volume Discount

CAD ：

2D / 3D

Straight Polyurethane Tube for General Piping Dedicated for Air

PISCO

Urethane tubes with excellent mechanical strength and oil resistance.[Features]·It has excellent flexibility and is ideal for compact piping that requires a small bending radius.·There are 2 tube colors, black and clear blue.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.[Application]·Equipment for assembly equipment, equipment for semiconductor manufacturing processes. For filling machine related, etc.·Servers that generate hydrogen water, automatic packaging machines for pharmaceutical products, etc.

Straight Fluororesin (PFA) Tube for Corrosion Resistance

PISCO

Straight tube for corrosive environments (chemical, medical, food, semiconductor related).[Features]·Excellent chemical resistance, heat resistance, weather resistance·High degree of internal smoothness, transparency and purity[Application]·Chemical-related, medical-related, pharmaceutical-related, food-related

Polyurethane Tube, UE95A Series

AIRTAC

[Features]• ROHS directive-compliant and used for general pneumatic pipes.• Flexible and optimal for installation in tight spaces.• Excellent mechanical strength (especially abrasion resistance).

Tube PU【1-3 Pieces Per Package】

CDC

•Related keywords: CDC, Tube / Tube Related Parts

Soft Nylon Tubing TS/TISA Series

SMC

Pliable soft nylon tubing.[Features]・ Maximum operating pressure of 1.0 MPa or less (At 20°C)[Applications]・ For general pneumatic piping

General Piping Straight Soft Nylon Tube

PISCO

A tube that is robust against bending fatigue for a long, stable service life.[Features]·It has excellent pressure resistance, can be used at high pressure, and can also be used for hot water and heat medium oil·Cut marks are displayed at intervals of approx. 500 mm, which is convenient when cutting tubes·Has excellent pressure resistance, abrasion resistance, and cold resistance, is resistant to bending fatigue, and can be used stably for a long time[Application]·Ideal for mold cooling water piping as a hot water resistant tube

Multi-Tube Holder TM Series

SMC

A multi-tube holder to facilitate arrangement of tubing. [Features]· Easy tube insertion and firm securing.· Possible to separate options depending on number of connected tubes.· Use of flame-retardant resin (equivalent to UL-94 standard V-0).· RoHS compliant.

CAD ：

2D / 3D

TE-AF Type Spatter-Resistant Tube

CHIYODA

[Features]·Single layer spatter-resistant tube: A single-layer spatter-resistant tube with a flame-retardant material processed into the TE tube main body, eliminating the need for peeling during piping.·A wide variety of color variations: Convenient for piping management.·TE tube-based: The features of TE tube are all inherited.

Air Hoses/Standard

MISUMI

[Features]·This air hose is extremely lightweight and has high cold and oil resistance.

• Volume Discount

CAD ：

2D / 3D

Urethane Tube U2 for General Air Pressure

NITTA

[Features]・ It has a good balance of flexibility and pressure resistance performance and excellent workability, and is suitable for general air piping applications・ Since it uses an ether polyurethane resin, corrosion and deterioration due to moisture and mold under high temperature and high humidity are reduced・ Coil processing and welding processing are possible

Air hose, PUN Series【1-50 Pieces Per Package】【1-50 Pieces Per Package】

FESTO

Air hose, PUN SeriesTheses Air tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter Minimum/Maximum (mm.) : 2 to 16● Inner Diameter Minimum/Maximum (mm.) : 1.2 to 11● Length (m.) : 50, 200, 400 and 500● Operating Temperature Range (℃) : -35 to 60● Material : TPE-U(PU)● Color : Black, Blue, Green, Natural, Red and Translucent color such as blue, green and yellow[Application]It is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Can be used for air and industrial water piping・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Excellent oil resistance・ Excellent outer diameter accuracy[Application]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

TOMBO No. 9003 NAFLON PTFE Tube

NICHIAS

Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.[Features]· Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).· The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).· Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).· The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).

Fluoropolymer Tubing (PFA) Metric Size, TLM Series

SMC

Superior heat resistance: fluoropolymer tubing (PFA) metric size, TLM series. [Features]· Uses highly chemical-resistant fluoropolymer. [Applications]· Used in the manufacture of solar cells, liquid crystals, hard disk drives, and in the healthcare and food industries.

Polyurethane Tubing 10-TU Series

SMC

Flexible polyurethane tubing. [Features]· Flexible. 0.8 MPa or less type (at 20°C).· Polyurethane tubing. [Applications]· For general pneumatic tubing.

Tubes/Nylon

MISUMI

Tubes/NylonAir Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2, 2.5, 4, 6, 7.5, and 9● Length (m.) : 10, 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Material : Nylon (Polyamide)● Color : Black and White[Application]This Nylon Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

CAD ：

2D / 3D

Hard Polyurethane Tubing TUH Series

SMC

Polyurethane tubing with superior resiliency even when compared to nylon tubing. [Features]· Fluid: air.· Available in 2 types: standard and high pressure.· Colors: black, translucent white, blue, translucent.· Superior resiliency.

Tubes/Soft Polyurethane

MISUMI

Tubes/Soft PolyurethanePolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, and 10● Inner Diameter (mm.) : 2.5, 4, 5, and 6.5● Length (m.) : 10, 20 and can configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Maximum operating pressure (MPa) : 0.4● Operating Temperature Range (℃) : -5 to 60● Material : Soft Polyurethane● Color : Black and Transparent[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

CAD ：

2D / 3D

Polyurethane Tubes (Black)

MISUMI

Polyurethane Tubes (Black)Polyurethane Air Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 5, 5.5, 6.5 and 8● Length (m.) : 100 and 200● Maximum operating pressure (MPa) : 0.8● Operating Temperature Range (℃) : -5 to 60 (Non freezing)● Material : Polyurethane● Color : Black[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Polyurethane Tubes (Transparent)

MISUMI

• Volume Discount

CAD ：

2D / 3D

Touch Tube TP Polyurethane Tube

CHIYODA

A polyurethane tube with excellent oil resistance.[Features]・ Excellent outer diameter accuracy・ Excellent flexibility and very small bending radius・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Excellent mechanical strength, especially abrasion resistance, ideal for equipment piping and robot piping[Application]・ Most suitable for all air piping (in-appliance piping, equipment piping, air tools, etc.)・ Excellent in oil resistance, ideal for air piping in factories

Nylon Tube Hard (Non-Plastic) Nylon N1

NITTA

Nylon Tube Hard (Non-Plastic) Nylon N1This is a 100% unplasticized nylon resin air used in various industries especially in high-pressure applications. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 6, 6.35 and 8● Inner Diameter (mm.) : 4, 4.57 and 6● Length (m.) : 20 and 100● Applicable Fluid : Water / Air / General Hydraulic Oil● Material : Nylon● Color : Black and Milky White[Application]This Nylon Tube is used in various industries

Tubes/Soft Nylon Tubes

MISUMI

Tubes/Soft Nylon TubesAir Tubes are used in various industries. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 6, 7.5, and 9● Length (m.) : 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Material : Nylon (Soft)● Color : Black and White[Application]This Nylon Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Tubes/Polyurethane/for Compressed Air

MISUMI

A compact air fitting tube. [Fluid Used]Water/air

• Volume Discount

CAD ：

2D / 3D

Fluororesin (FEP) Tube

PISCO

Fluororesin (FEP) TubeThese Air tubes offer excellent chemical resistance, making them perfect for fields involving chemicals, food, medicine, or semiconductors. They come in a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 7.5, 9 and 10● Length (m.) : 1 to 20● Applicable Fluid : Air, Water (with conditions ), Other Chemicals (with conditions)● Operating Temperature Range (℃) : -65 to 200 (Non freezing）● Material : Fluoro resin (FEP)● Color : Clear[Application]This Fluoro resin Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

Soft Fluoropolymer Tubing TD/TID Series

SMC

Compatible with Japan's Food Sanitation Law.[Features]・ Flexibility: About 20% improvement・ Operating temperature is MAX.260°C[Applications]・ Ideal for use when flexibility is required

Tubes/Fluororesin Type

MISUMI

Tubes/Fluororesin TypeAir Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 1.6, 2 , 4 , 6, 8 and 10● Length (m.) : 10, 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Maximum operating air pressure (MPa) : 0.75, 1, 1.1, 1.7 and 2.5 depends on the sizes● Material : Fluororesin (PFA)● Color : White[Application]Fluororesin Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Urethane Tubes

KOGANEI

The minimum bend radius can be reduced due to its flexibility. Superior weatherability, particularly against ozone. Excellent oil resistance. *The tubing can be cut to length (black).

Polyurethane Tubes (Blue)

MISUMI

Polyurethane Tubes (Blue)Air Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 5.5, 6.5, and 8● Length (m.) : 100 and 200● Operating Temperature Range (℃) : -5 to 60 (Non freezing)● Material : Polyurethane● Color : Blue[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

General Piping Coiling Urethane Tube

PISCO

A tube ideal for air guns, pneumatic screwdrivers, etc.

Touch Tube TE Water-Resistance Polyurethane Tube

CHIYODA

A polyurethane tube with excellent water and oil resistance, suitable for equipment piping.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Piping is possible regardless of air or industrial water・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Excellent mechanical strength, especially abrasion resistance, ideal for equipment piping and robot piping・ Excellent outer diameter accuracy・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Easy to check the remaining number[Applications]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

Nylon Touch Tube TN

CHIYODA

Robust nylon tube with superior burst pressure (6 MPa).[Features]· High burst pressure: very robust with high burst pressure.· Superior outer diameter precision: outer diameter precision noted in the model table.· Cut Marks and model view: cut marks printed at 1 m intervals are optimal for cutting work and inventory control