Air Tube/Nylon Tube（O.D. [Category]：~6 Page2）

Nylon Coil Tube S

NITTA

A highly resilient nylon coil tube S that does not elongate easily by losing elasticity.[Features]· A coil tube that is highly resilient and does not elongate easily by losing elasticity.· The tubes have superior heat resistance.

Polyolefin Resin Tube Clean Pipes (Flexible) PL

NITTA

[Features]・ A clean tube that uses clean air, N2 gas, pure water, or various chemicals,etc., as a fluid, and is suitable for installation and applications.・ Environmentally friendly eco-type tube. Carbon dioxide is the only gas generated during incineration (750°C), and no toxic gases such as nitrogen oxides (NOx) and sulfur oxides (SOx) are generated. No dioxin is generated・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging・ Uses a special polyolefin resin with excellent moisture barrier properties and flexibility・ Economical compared to fluoropolymer tubes・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Junflon High-Barrier PFA Tube

JUNKOSHA

[Features]・ Fluoropolymer tube with excellent barrier properties・ Hybrid tube with fluoropolymer PFA for the inner layer and barrier fluoropolymer for the outer layer・ The inner layer of the liquid wetted parts uses PFA for semiconductors and has high basic characteristics (purity, chemical resistance, non-adhesion, heat resistance) for semiconductor piping applications・ Barrier fluoropolymer has excellent barrier properties against acids (hydrochloric acid, nitric acid, etc.) and ammonia・ Suppresses acid permeation compared to conventional PFA tube piping・ Reduces adverse environment to the surrounding environment・ Maintains fluid transparency for a long time・ Mechanical properties are equivalent to conventional PFA tubes・ Manufactured in a clean environment that is consistently controlled from raw material input to molding and packaging[Applications]・ Tube for semiconductor / liquid crystal manufacturing equipment・ Tube for solar battery panel manufacturing equipment・ Tube for chemical supply / cleaning device・ Tube for chemical plant

Clean Tubing: Soft Polyolefin Tubing TPS Series

SMC

Clean tubing: soft polyolefin tubing in a variety of colors. [Features]· Maximum operating pressure 0.7 MPa (at 20°C).· RoHS compliant. [Applications]· Fluid: Air, nitrogen gas, water, DI water (pure water).

Moisture Control Tube, Series IDK

SMC

[Features] · Prevents condensation in small cylinders and air grippers. · Draws out internal water vapor. · No power supply or additional engineering required. · Just install the Moisture Control Tube into your existing setup and go.

New Urethane Tube, NU Series

CKD

Allows both a larger internal diameter and increased strength with the same external diameter.

The Anti-Static Straight Anti-Static Tube

PISCO

Tube using a static electricity dissipation resin.[Features]·Uses conductive resin.·Ideal for manufacturing and assembly lines that require antistatic performance.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.[Application]·Semiconductor related.

Touch Tubing, SP Soft Polyurethane Tubing

CHIYODA

Soft urethane tube suitable for drive equipment.[Features]·The one of the most flexible of all Chiyoda polyurethane tubes.·Dedicated to the tube outer diameter of 4 and 6 mm.·The use of inner support makes it compatible with quick-connect fitting.·Excellent oil resistance and ideal for air piping in factories.・ Excellent outer diameter accuracy.[Application]·Ideal for piping in small places.·Convenient for various types of air piping (piping inside machines, etc.).

Urethane Tube for General Air Pressure (Ultra Flexible) U5

NITTA

[Features]▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.▪Barb fittings (bamboo shoot joints) can be used.

Urethane Multi-line Tube UML

NITTA

Urethane multi-line tube UML is a urethane tube "U2" is a multiple welding processed tube.[Features]・The urethane tube "U2" is a multiple installed tube

Fluoropolymer Tube TA, Clean, Heat Resistant, Cold Resistant, Chemical Resistant

NITTA

[Features]・ Uses PFA (tetrafluoroethylene / perfluoroalkyl vinyl ether copolymer) resin with excellent chemical resistance・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging・ It has excellent cleaning properties and reduces the adhesion of chemicals・ A tube that does not change over time and has excellent weather resistance・ It can be used even in an environment such as an ozone atmosphere・ Can also be used for the clean fitting "Chemfit CSE Series"・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

TOMBO No. 9003-BT, Nylon BT Tube

NICHIAS

Tube with superior flexibility and transparency which employs a single type of fluorine resin. Suitable for use for piping in narrow spaces.[Features]· Bends easily and thus is not prone to buckling even when the turning radius is tight.· More transparent than normal PTFE tubes.

Junflon Sputtering Tube (Tube for Spot Welder), Junflon SPF (Three-Layer Sputtering Tube)

JUNKOSHA

Exhibits excellent durability against sparks and shocks generated from welding equipment. High flexibility, and with excellent weather and water resistance.

Junron Hybrid Tube (Inner-Layer Fluoride Polymer Tube), Junron AP1

JUNKOSHA

The two-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it is integrally molded.

Coated Tube for Spatter Resistance

PISCO

Coated Tube for Spatter ResistanceThese Polyamide tubes are compliant with flame-retardant resin . They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 6, 7.5 and 9● Length (m.) : 20 and 100● Applicable Fluid : Water / Air / Heat-transfer Oil● Operating Temperature Range (℃) : -15 to 90● Material : Polyamide● Color : Gray[Application]This Polyamide Tube is used to connect with various equipment

Fluororesin (FEP) Tube

PISCO

Fluororesin (FEP) TubeThese Air tubes offer excellent chemical resistance, making them perfect for fields involving chemicals, food, medicine, or semiconductors. They come in a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 10 and 12● Inner Diameter (mm.) : 2.5, 4, 7.5, 9 and 10● Length (m.) : 1 to 20● Applicable Fluid : Air, Water (with conditions ), Other Chemicals (with conditions)● Operating Temperature Range (℃) : -65 to 200 (Non freezing）● Material : Fluoro resin (FEP)● Color : Clear[Application]This Fluoro resin Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series

SMC

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Polyurethane Flat Tubing TFU Series

SMC

Polyurethane flat tubing that makes compact piping possible. [Features]· Makes compact piping possible.· With line markings for piping differentiation.· Maximum operating pressure 0.8 MPa or less (at 20°C).· Fluid: air.

Clean Tubing, Polyolefin Tubing, TPH Series (20 m / 100 m)

SMC

A RoHS-compliant clean tube. [Features] · Applicable fittings: clean one-touch fitting, metal one-touch fitting KQB2 Series. · Applicable fittings: SUS316 one-touch fittings KQG2 series, insert fittings. · Colors: white (material color) / black (opaque) / red (opaque) / blue (opaque) / yellow (opaque) / green (opaque). · Length: 20 m roll / 100 m roll.

Soft Nylon Tubes, SN Series

KOGANEI

Features excellent water resistance, dimensional stability, and weather resistance, as well as flexibility[Features]· Flexibility is added while maintaining the properties of a nylon tube with excellent water resistance, dimensional stability, and weather resistance.

Nylon

KOGANEI

Low water absorption, with excellent water resistance, dimensional stability, abrasion resistance, and weatherproofing.

Multi-Core Straight Flat Tube for General Piping

PISCO

Flat tubes ideal for filling machine-related specifications.[Features]·Multiple pipes such as double-acting drive equipment can be neat and clean.·UQ using flexible polyurethane tube and UCQ using ultra-soft polyurethane tube are available.·In the case of black with 2 cores, an identification line is printed on one side of the tube to prevent piping mistakes.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.

Urethane Tubes, TE Series

TAIYO

Features excellent flexibility. Has excellent diametral accuracy and is safe for use with single-touch fittings.[Features]• The burst pressure is as high as 3.0 MPa (at 20°C), allowing for use in a wide range of applications.· Excellent flexibility.• The bending radius is smaller than conventional types.• A series of ⌀12 types are also available.• Has excellent diametral accuracy and is safe for use with single-touch fittings.

Twin Touch Tube TP Polyurethane Tube

CHIYODA

Lined twin touch type with simplified pipe identification.[Features]· Uses TP tubing: inherits the features of TP tubing.· Simplifies identification of single side lined piping.· One-touch fitting supported: Connectible with a one-touch fitting via a special welding process that leaves no marks during peeling

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Can be used for air and industrial water piping・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Excellent oil resistance・ Excellent outer diameter accuracy[Application]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

SP Soft Polyurethane Touch Tube Spiral

CHIYODA

Spiral type soft tube.[Features]· Use of SP tube: inherits the features of the SP tube as-is

Multi-Flat Tubes

CHIYODA

A flat tube with abundant color variations for easy identification.

Multi-Straight Tube

CHIYODA

A straight tube that uses a variety of different color variations to make pipe identification easy.[Features]· Directly inherits the features of TP tubing.· Can be connected using a one touch fitting without leaving marks during peeling via special welding .· Pipe identification is made easy through color variation wherein a different color can be used for each pipe.· Ideal for locations where horizontal piping is difficult or when many pipes are used

Touch Spiral Wrap Tube TPS

CHIYODA

A polyurethane spiral wrap with excellent water and oil resistance, suitable for equipment piping.[Features]・ Excellent in water resistance and oil resistance, ideal for factory environment・ Hard to break and flexible・ Excellent wear resistance・ The fitting connection part has an excellent outer diameter system to prevent pipe disconnection and leakage・ Inheriting the features of TE tube as it is・ Quick-connect fittings can also be used[Applications]・ Ideal for all industrial water piping and air piping driving points (equipment piping, robots, conveyors, etc.)

Multi Spiral Wrap MPS Type

CHIYODA

Colorful air piping multi-core spiral wrap with excellent flexibility.[Features]・ The touch tube is bundled into multiple cores and processed into a coil. Ideal for telescopic piping・ A wide variety (204 standard types) are available. Possible to select according to operating environment・ Both ends of the straight part are 200 mm, allowing fine adjustment of the operating range・ Excellent abrasion resistance・ Inheriting the same features as TP tubes・ Quick-connect fittings can be used[Applications]・ Most suitable for all air pipe drive locations (internal piping, robots, conveyors, etc.)

Water Resistant Multi-Spiral Tubes MES Series

CHIYODA

These spiral tubes feature superior water resistance.

Slitted Straight Tube

CHIYODA

A slitted straight tube that makes it possible to replace electric wiring.[Features]· Slit machining.· Thanks to the slit on the tube, it is possible to perform wire replacement.· Wire protection.· Best suited for protecting electrical wires from scraping damage within cableveyors, etc., by placing wiring inside air tubes.· One-touch fittings can be used for air piping.· Special orders accepted

Slit Spiral Wrap 3-SSE Type

CHIYODA

Slit spiral wrap with replaceable cables.[Features]・ Slit processing. Cables can be replaced by slitting the tube・ Electric cable protection. Optimal for protection by rubbing the wire inside the cable carrier by putting the wire in the air tube・ Quick-connect fittings can be used for air piping

Toaron G Tube

KOKUGO

Transparent tube with superior chemical resistance.[Features]· Has ultra-high elasticity, transparency, and superior cold resistance.· Has superior chemical resistance, weather resistance, ozone resistance, sulfidation resistance, and superior repeated compressibility characteristics.· The operating temperature range is -40℃ to +70℃

Urethane Coil Tube UC/USC/UMC

NITTA

[Features]・ This is a tube made by processing the urethane tube "U2" into a coil shape・ "USC" is a coil tube with a more compact coil outer diameter than "UC"・ "UMC" is a coil tube that enables multiple piping by welding multiple tubes

Urethane Tube for General Air Pressure (High Pressure Type) U1

NITTA

【Features】 · Usable in the pressure area higher than U2 tube Since it uses the coterie based polyurethane resin, deterioration of erosion due to moisture and mold at high temperature and humidity. happens less. Coil machining and welding machining are possible. •Related Keywords: NITTA, Tube / Tube Related Parts

Shape Retaining Tube, DK for Shape Retaining and Fixed Piping That is Hard to Clamp

NITTA

[Features]·Shape Retention Tube DK uses aluminum for the inner layer, so it retains the shape when piping.·Ideal for fixed piping.·By using the DK tube dedicated fitting, it is easier to install than the copper pipe.·No tube terminal processing is required.

Antistatic Tube - General Pressure (Conductive) UE

NITTA

【Features】 The antistatic tube UE uses conductive polyurethane elastomer. There is not static and spark is prevented.(Surface Resistance 105Ω ~ 103Ω). Excellent flexibility •Related Keywords: NITTA, Tube / Tube Related Parts

Flame-Retardant Tube for Spot Welding Piping FS

NITTA

Flame retardant tube FS has excellent self-extinguishing capabilities corresponding to UL94 Standard V-0. Excellent flexibility due to single layer structure. Marking is added to total length for indicating insert length.

Junflon Spattering Tube (Tube for Spot Welder), Junflon SP4 (Two-Layer Spattering Tube)

JUNKOSHA

[Features]・ Double tube with flame-retardant special resin stacked, this special resin prevents sparks・ It is highly flexible and has excellent water resistance[Applications]・ Spot welding robot / clamp jig water and air line tubes・ Tube for pneumatic equipment

Junflon FEP Tube (Fluoropolymer Tube)

JUNKOSHA

[Features]・ It has excellent heat and cold resistance・ Inert against most chemicals and solvents・ Excellent weather resistance and no secular change・ Most things do not adhere easily, and even if they adhere, they can be easily removed・ It is flame retardant・ Excellent electrical characteristics・ No risk of elution of toxic substances[Application]・ Tube for corrosive fluid transfer・ Tube for solvent / chemical solution transfer・ Tube for adhesive fluid transfer・ Tube for food plant・ Tube for various liquid transfer・ Various equipment that requires heat resistance, high insulation, and high frequency characteristics

Junflon FT (PFA Fluoropolymer Coiled Tube)

JUNKOSHA

[Features]・ It has excellent heat and cold resistance・ Inert against most chemicals and solvents・ Excellent weather resistance and no secular change・ Most things do not adhere easily, and even if they adhere, they can be easily removed・ It is flame retardant・ Excellent electrical characteristics・ No risk of elution of toxic substances[Applications]・ Tube for corrosive fluid transfer・ Tube for solvent / chemical solution transfer・ Tube for adhesive fluid transfer・ Tube for food plant・ Tube for various liquid transfer・ Various equipment that requires heat resistance, high insulation, and high frequency characteristics

Junron A (Nylon Tube), Junron AC1 (Soft Nylon Control Tube)

JUNKOSHA

Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Excels in heat and low temperature resistance. High flexibility. Excels in oil resistance and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

Junron A (Nylon Tube), Junron AS2 (High Pressure-Resistant Nylon Tube)

JUNKOSHA

[Features]・ Excellent mechanical strength, especially pressure resistance, abrasion resistance and flex fatigue resistance・ It has excellent heat and cold resistance・ It is highly flexible・ Excellent oil and chemical resistance (especially alkali resistance)・ No risk of elution of toxic substances・ Light and has excellent workability[Application]・ Tube for oil / pneumatic equipment・ Tube for centralized lubrication equipment・ Tube for painting equipment・ Tube for fluid element・ Tube for chemical plant

Junron AT4 (Super-Flexible Nylon Coil Tube)

JUNKOSHA

[Features]・ The flexible / ultra-soft nylon tube is coiled and has excellent spring properties・ Excellent mechanical strength, especially pressure resistance, abrasion resistance and flex fatigue resistance・ Light and has excellent workability[Applications]・ Air tools such as air drivers and air hammers・ Tube for movable parts