• You can add up to 6 items per a category to the compare list. Compare

  

  Standard V-Pulley

  NABEYA BI-TECH

  "Shaft hole, keyway and push screw machining standardized." [Features]· Japan's first standard inch size product.· Consistent production from casting to machining and surface treatment.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt. [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 224,960 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  JIS V-Pulley, B Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854. [Features]· Consistent production from casting to machining and surface treatment.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Shaft hole, keyway and push screw machining standardized.· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley"). [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 490,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  JIS V-Pulley A Series

  NABEYA BI-TECH

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.[Features]· Consistent production from casting to machining and surface treatment.· The cell production method allows the production of many kinds of products in low volume, with short lead times.· Shaft hole, keyway, and set screw machining standardized.· Easy set-up· A: 146 size, B: 218 size, C: 212 size, D: 74 size.· 369 size has been added into JIS standard 281 size separately· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.· Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")· Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.· Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  CAD ：

  2D / 3D

  From: 285,290 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Isomec SP Pulley

  NABEYA BI-TECH

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.[Features]· Consistent production from casting to machining and surface treatment.· The cell production method allows the production of many kinds of products in low volume, with short lead times.· Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  CAD ：

  2D / 3D

  From: 792,911 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ISOMEC Polydrive Pulley

  NABEYA BI-TECH

  V-belt pulley with high power transmission and large rotation ratio. [Features]· High transmission efficiency. ISO 9982 compliant.· Consistent production from casting to machining and surface treatment.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.・ Can be attached and removed from shaft and positioned with hex or socket wrench.· In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.· Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.· Balancing is adjusted using a balancing machine. [Applications]· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.

  CAD ：

  2D / 3D

  From: 807,751 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V-Pulley B

  KANEMITSU

  Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.[Features]· Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.· The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.· Dimensional precision to JIS reference standards, with thorough quality control.

  From: 215,121 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  JIS V-Pulley, C Type

  NABEYA BI-TECH

  Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards. [Features]· Consistent production from casting to machining and surface treatment.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Shaft hole, keyway and push screw machining standardized.· A: 146 size, B: 218 size, C: 212 size, D: 74 size.· 369 size has been added into JIS standard 281 size separately.· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.· Imbalance tolerance on outer circumference is 0.1% of pulley mass.· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish. [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 937,756 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Isomekku Bushing

  NABEYA BI-TECH

  Safe and reliable fastening system. Responding to a design change is easy.

  CAD ：

  2D / 3D

  From: 401,701 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Variable Speed Pulley

  NABEYA BI-TECH

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  CAD ：

  2D / 3D

  From: 1,306,750 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V Pulley A

  KANEMITSU

  Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.[Features]· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.· Dimensional precision to JIS reference standards, with thorough quality control.· Groove part shape and dimensions table.· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

  From: 258,696 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vankin Pulley VK

  NABEYA BI-TECH

  Lightweight V-belt pulley made of sheet metal. [Features]· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact. [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 283,880 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wedge Pulley

  NABEYA BI-TECH

  High-speed, high power transmission V-belt pulley that conforms with JIS B 1855. [Features]· Consistent production from casting to machining and surface treatment.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass. [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 362,028 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS Power Sheave 5V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)[Features]· JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.· JIS B 1855 slim V-pulley dimensions adopted for interchangeability.· Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.· Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.· Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.· Power sheave has enough strength to withstand.· Since release, it has been used by many, so can be adopted with confidence.· Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.

  From: 2,543,446 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS JIS V Pulley B

  KANEMITSU

  Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

  From: 740,228 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS JIS V Pulley A

  KANEMITSU

  Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.[Features]· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.· Shaft etc. can be preserved, useful for saving labor.· Can also be used for machines with heavy loads and shocks etc.· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

  From: 371,953 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS Power Sheave 3V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)

  From: 459,746 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  JIS V-Pulley, D Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854. [Features]· Consistent production from casting to machining and surface treatment.· Shaft hole, keyway and push screw machining standardized.· Cell production method allows the production of many kinds of products in low volume, with short lead times.· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").· Imbalance tolerance on outer circumference is 0.1% of pulley mass.· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish. [Applications]· Fans, etc.

  CAD ：

  2D / 3D

  From: 14,382,753 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41U) EA968A-66

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Datum dia.-180mm・Dia.-185.5mm・Shape-41U

  From: 5,483,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ISOMEC Bushing / Adapter

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  From: 932,946 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V-Pulley C

  KANEMITSU

  Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.

  From: 795,608 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41U) EA968A-143

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable belt-B・BX(For standard)、5V・5VX(Thin widthV belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Size(mm)-Datum dia.：140、OD.：147・Shape-41U

  From: 3,194,944 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single groove]V pulley (A)

  ESCO

  【Product Specifications】・Material-Cast iron・1 groove・Shape-11U・Size-l：25mm, S：5mm, W：20mm, d：85mm・Datum dia.-100mm・Dia.-105.5mm・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately

  From: 1,525,444 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Engineering Plastic V-Pulley Idler (VIP)

  IMAO CORPORATION

  [Features]· Adaptive V-belt M type, A type, B type resin pulley idler.· Integrated ball bearing

  CAD ：

  2D / 3D

  From: 335,603 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  STB Sheave 3V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  From: 660,546 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB Sheave 5V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  From: 2,925,921 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB synchro pulley L

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type L. Teeth no. 36 (material: carbon steel), teeth no. 40 (material: exceeds FC200)

  From: 1,339,840 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41U) EA968A-145

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable belt-B・BX(For standard)、5V・5VX(Thin widthV belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Size(mm)-Datum dia.：150、OD.：157・Shape-41U

  From: 3,761,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41U) EA968A-61

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Datum dia.-125mm・Dia.-130.5mm・Shape-41U

  From: 2,653,187 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Isomec - bushing bolt Onhub

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  From: 1,159,858 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB synchro pulley H

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)[Features]· Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.

  From: 1,866,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [One-Groove] V Pulley (SP Pulley /11U) EA968A-10

  ESCO

  【Product Specifications】・Material-Cast iron・1 groove・Shape-11U・Size-l：25mm, S：5mm, W：20mm, d：85mm・Datum dia.-125mm・Dia.-130.5mm・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately

  From: 1,832,829 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /41UR) EA968A-102

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：132mm, OD.：139mm・Shape-41UR

  From: 2,451,738 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /41UR) EA968A-105

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：160mm, OD.：167mm・Shape-41UR

  From: 3,546,356 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /10U) EA968A-119

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：236mm, OD.：243mm・Shape-10U

  From: 6,341,211 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41UR) EA968A-152

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable belt-B・BX(For standard)、5V・5VX(Thin widthV belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Size(mm)-Datum dia.：185、OD.：192・Shape-41UR

  From: 6,341,390 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41UR) EA968A-154

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable belt-B・BX(For standard)、5V・5VX(Thin widthV belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Size(mm)-Datum dia.：195、OD.：202・Shape-41UR

  From: 6,823,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /10U) EA968A-40

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable belt-A・AX(For standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Datum dia.-200mm・Dia.-205.5mm・Shape-10U

  From: 4,878,331 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Three-Groove] V Pulley (SP Pulley /41UR) EA968A-58

  ESCO

  【Product Specifications】・3 grooves・Material-Cast iron・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Datum dia.-106mm・Dia.-111.5mm・Shape-41UR

  From: 2,151,828 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [One-Groove] V Pulley (SP Pulley /11U) EA968A-8

  ESCO

  【Product Specifications】・Material-Cast iron・1 groove・Shape-11U・Size-l：25mm, S：5mm, W：20mm, d：85mm・Datum dia.-112mm・Dia.-117.5mm・Applicable V belt-A・AX(for standard)、SPA(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately

  From: 1,713,956 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VMG groove gauge for V pulley

  NABEYA BI-TECH

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  From: 1,431,134 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [2 grooves]V pulley (B)

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：125mm, OD.：132mm・Shape-41UR

  From: 2,265,272 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /41U) EA968A-103

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：140mm, OD.：147mm・Shape-41U

  From: 2,697,666 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /41U) EA968A-104

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：150mm, OD.：157mm・Shape-41U

  From: 2,957,085 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /41UR) EA968A-107

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：170mm, OD.：177mm・Shape-41UR

  From: 3,970,671 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Two-Groove] V Pulley (SP Pulley /11U) EA968A-109

  ESCO

  【Product Specifications】・2 grooves・Material-Cast iron・Applicable V belt-B・BX(for standard)、5V・5VX(Thin Width V belt)、SPB(SP belt)・It can be attached to/removed from/positioned on a shaft with a single hex wrench or socket wrench.・Safe and certain transmission・Bushing sold separately・Size-Datum dia.：180mm：OD.：187mm・Shape-11U

  From: 4,511,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	KANEMITSU	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	KANEMITSU	NABEYA BI-TECH	NABEYA BI-TECH	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	NABEYA BI-TECH	ESCO	NABEYA BI-TECH	KANEMITSU	ESCO	ESCO	IMAO CORPORATION	KANEMITSU	KANEMITSU	KANEMITSU	ESCO	ESCO	NABEYA BI-TECH	KANEMITSU	ESCO	ESCO	ESCO	ESCO	ESCO	ESCO	ESCO	ESCO	ESCO	NABEYA BI-TECH	ESCO	ESCO	ESCO	ESCO	ESCO
Product SeriesDòng sản phẩm	Standard V-Pulley	JIS V-Pulley, B Type	JIS V-Pulley A Series	Isomec SP Pulley	ISOMEC Polydrive Pulley	NS Standard V-Pulley B	JIS V-Pulley, C Type	Isomekku Bushing	Variable Speed Pulley	NS Standard V Pulley A	Vankin Pulley VK	Wedge Pulley	SNS Power Sheave 5V	SNS JIS V Pulley B	SNS JIS V Pulley A	SNS Power Sheave 3V	JIS V-Pulley, D Type	[Three-Groove] V Pulley (SP Pulley /41U) EA968A-66	ISOMEC Bushing / Adapter	NS Standard V-Pulley C	[Three-Groove] V Pulley (SP Pulley /41U) EA968A-143	[Single groove]V pulley (A)	Engineering Plastic V-Pulley Idler (VIP)	STB Sheave 3V	STB Sheave 5V	STB synchro pulley L	[Three-Groove] V Pulley (SP Pulley /41U) EA968A-145	[Three-Groove] V Pulley (SP Pulley /41U) EA968A-61	Isomec - bushing bolt Onhub	STB synchro pulley H	[One-Groove] V Pulley (SP Pulley /11U) EA968A-10	[Two-Groove] V Pulley (SP Pulley /41UR) EA968A-102	[Two-Groove] V Pulley (SP Pulley /41UR) EA968A-105	[Two-Groove] V Pulley (SP Pulley /10U) EA968A-119	[Three-Groove] V Pulley (SP Pulley /41UR) EA968A-152	[Three-Groove] V Pulley (SP Pulley /41UR) EA968A-154	[Two-Groove] V Pulley (SP Pulley /10U) EA968A-40	[Three-Groove] V Pulley (SP Pulley /41UR) EA968A-58	[One-Groove] V Pulley (SP Pulley /11U) EA968A-8	VMG groove gauge for V pulley	[2 grooves]V pulley (B)	[Two-Groove] V Pulley (SP Pulley /41U) EA968A-103	[Two-Groove] V Pulley (SP Pulley /41U) EA968A-104	[Two-Groove] V Pulley (SP Pulley /41UR) EA968A-107	[Two-Groove] V Pulley (SP Pulley /11U) EA968A-109
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D					2D / 3D						2D / 3D
From	224,960 VND	490,263 VND	285,290 VND	792,911 VND	807,751 VND	215,121 VND	937,756 VND	401,701 VND	1,306,750 VND	258,696 VND	283,880 VND	362,028 VND	2,543,446 VND	740,228 VND	371,953 VND	459,746 VND	14,382,753 VND	5,483,240 VND	932,946 VND	795,608 VND	3,194,944 VND	1,525,444 VND	335,603 VND	660,546 VND	2,925,921 VND	1,339,840 VND	3,761,366 VND	2,653,187 VND	1,159,858 VND	1,866,541 VND	1,832,829 VND	2,451,738 VND	3,546,356 VND	6,341,211 VND	6,341,390 VND	6,823,240 VND	4,878,331 VND	2,151,828 VND	1,713,956 VND	1,431,134 VND	2,265,272 VND	2,697,666 VND	2,957,085 VND	3,970,671 VND	4,511,123 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	Same day or more	6 Day(s) or more	9 Day(s) or more	4 Day(s) or more	8 Day(s) or more	Same day or more	9 Day(s) or more	4 Day(s) or more	8 Day(s) or more	Same day or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more

Loading...Tải…