• Economy series

  You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  MiSUMi Economy

  Stepper Motors 57 Series With Gearbox

  MiSUMi Economy

  MISUMI

  - Stepping Motors 57 Series with Gearbox from MISUMI. - Pulse signal voltage range: 5-24V, eliminating the need to prepare 5V switching power supplies or connect current limiting resistors in series. - AC/DC universal, allowing for connection with straight or reversed polarity. - All series of the products adopt helical gears to increase the service life and reduce the noise. - The reduction ratio categories are complete: 3, 7.5, 10 and 15, which cover most working conditions. - Step angle is 1.8° - Driver Output Current(A): 1.0-4.3 A - Driver Power Voltage(v): VDC24-80 or VAC20-60

  • Volume Discount

  CAD ：

  2D / 3D

  From: 1,111,325 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  New 5th Phase Stepper Motor Unit RKII Series

  ORIENTAL MOTOR

  Unimaginable high performance of stepper motors so far. The driver uses full digital control to maximize the performance of the motor. A motor with unprecedented high efficiency, low heat generation and low vibration. Space-saving, easy wiring, and improved ease of use such as of protection function.

  From: 10,550,325 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/05/2024

  

  High Torque 2-Phase Stepping Motor, Standard type, PKP Series

  ORIENTAL MOTOR

  [Features]・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size

  From: 20,704,194 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor for Units

  ORIENTAL MOTOR

  This is an individual motor (component) of the stepper motor unit.

  From: 6,188,601 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, PK Series

  ORIENTAL MOTOR

  Oriental Motor, stepper motor PK Series.

  From: 3,623,813 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepping Motors, AZ Series

  ORIENTAL MOTOR

  [Features]・ Equipped with a newly developed ABZO sensor・ No external sensor required・ Reduction of origin return time・ No battery required・ Energy saving and low heat generation・ Three drivers to choose from to match your system configuration・ Easy operation that can be realized with the data setting software MEXE02

  From: 12,889,611 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, UPKW Series

  ORIENTAL MOTOR

  - Stepping Motor, UPKW Series from ORIENTAL MOTOR. - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation. - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).

  From: 6,410,055 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/05/2024

  

  VEXTA Accessory

  ORIENTAL MOTOR

  - Stepping motor and accessory of CSK series from ORIENTAL MOTOR. - High torque, The PK high torque motor was designed to produce high torque in a compact frame size. - Vibration and noise levels low. - Compact package, Both the motor and driver are designed to be compact, making them perfect for reducing the size and weight of machines. - High resolution, the 5-phase stepping motors have 0.72˚ per step in full-step mode and 0.36˚ per step in half-step mode.

  From: 6,957,184 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°

  FULLING MOTOR

  - 86 series 2-phase gearbox equipped with a high torque stepping motor with 1.8° step from FULLING MOTOR. - Step angle: 1.8° - Step angle accuracy: ± 5% (full step, no load) - Resistance accuracy: ± 10% (20℃) - Inductance accuracy: ± 20% (1kHz) - Temperature Rise: 80℃ Max. - Ambient Temperature: -20℃～+50℃ - Insulation Resistance: 100MΩ Min. ,500VDC - Dielectric Strength: 820VAC, 1s, 3mA - Max. radial force: 220N (20mm from the flange) - Max. axial force: 60N

  CAD ：

  2D / 3D

  From: 3,548,500 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, CRK Series

  ORIENTAL MOTOR

  The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.[Features]・ Lineup of products with encoders (CRK only)・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)

  From: 8,032,832 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series

  ORIENTAL MOTOR

  [Features]・ New high torque 2-phase stepper motor PKP Series・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures・ Backlash is smaller than conventional products. Also, wider speed range and easier to use

  From: 3,350,158 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor With Built-in Controller, SSA-TR Series

  SHINANOKENSHI

  <Features>● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.● It is easy to set the operation with the included dedicated application.● Various operations can be programmed in 8 tables.● Micro step division (1, 2, 4, 16) selectable from 4 levels.● Design with special bracket for high heat dissipation.<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.

  From: 7,500,524 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series

  SHINANOKENSHI

  Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DVC24V.Error output function.· Abundant protection functions (excess heating, voltage and current).

  From: 8,070,814 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Speed Controller Built-in Stepper Motor "SSA-VR Series"

  SHINANOKENSHI

  <Features>● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.● Abnormal rotation detection and automatic recovery are possible with the motor alone.● Speed control is made simple with analog input.● Wide speed control range (0 to 1800r/min).<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

  • Volume Discount

  From: 8,517,145 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANOKENSHI

  [Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  From: 14,555,084 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Step out detection driver & stepping motor set CSA-BX series

  SHINANOKENSHI

  Step-out detection, closed loop switchable by switch[Features]· Step-out detection and closed loop mode can be toggled by switch.· Step-out detection possible (synchronization loss detection mode) using open loop control.· Equipped with step-out prevention function (closed loop mode) using closed-loop control.· Motor startup with speed filter, vibration reduction possible at stopping time.· 4 step resolution (400, 800, 1600, 3200P/R).· 13 step current setting: 0.6 to 3.0A· Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).· Input power supply: DC24V.· Auto power down function.

  • Volume Discount

  From: 9,204,902 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANOKENSHI

  Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DC24V.· Error output function.· Abundant protection functions (excess heating, voltage and current).

  From: 9,706,340 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series

  SHINANOKENSHI

  [Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70XH90XD33 mm, 190 g.

  From: 12,358,907 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Type Details
Square Flange Size A(mm)
Power Supply
Voltage Specifications
Control Method
Step Angle(°)
Reducer
Drive Method
Backlash(°)
Holding torque (classification)(N·m)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/05/2024	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/05/2024	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI MiSUMi Economy	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	FULLING MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI
Product SeriesDòng sản phẩm	Stepper Motors 57 Series With Gearbox	New 5th Phase Stepper Motor Unit RKII Series	High Torque 2-Phase Stepping Motor, Standard type, PKP Series	Stepper Motor for Units	Stepper Motor, PK Series	Stepping Motors, AZ Series	Stepper Motor, UPKW Series	VEXTA Accessory	86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°	Stepper Motor, CRK Series	High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series	Stepper Motor With Built-in Controller, SSA-TR Series	Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series	Speed Controller Built-in Stepper Motor "SSA-VR Series"	2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit	Step out detection driver & stepping motor set CSA-BX series	Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit	Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series
CADCAD	2D / 3D								2D / 3D
From	1,111,325 VND	10,550,325 VND	20,704,194 VND Special Price On Sale Till 31/05/2024	6,188,601 VND	3,623,813 VND	12,889,611 VND	6,410,055 VND	6,957,184 VND Special Price On Sale Till 31/05/2024	3,548,500 VND	8,032,832 VND	3,350,158 VND	7,500,524 VND	8,070,814 VND	8,517,145 VND	14,555,084 VND	9,204,902 VND	9,706,340 VND	12,358,907 VND
Days to ShipSố ngày giao hàng	Same day	19 Day(s) or more	19 Day(s)	19 Day(s)	19 Day(s)	19 Day(s)	19 Day(s)	19 Day(s) or more	15 Day(s) or more	19 Day(s) or more	19 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Type Details	Motor Only / Set	Motor Only / Set	Motor Only	Motor Only	Motor Only	Motor Only	Motor Only	Set	Motor Only	Motor Only / Set	Motor Only / Set	Motors	Set	Motors	Set	Set	Set	Set
Square Flange Size A(mm)	-	42 ～ 90	42	28 ～ 90	42 ～ 60	28 ～ 90	42 ～ 60	42 ～ 60	86	20 ～ 60	28 ～ 60	42 ～ 60	42 ～ 60	42 ～ 60	42 ～ 60	42 ～ 60	42 ～ 60	42 ～ 60
Power Supply	-	Single-phase	2-phase	-	2-phase ～ 5-phase	Single-phase / 3-phase ～ Single-phase	5-phase	DC	2-phase	5-phase	2-phase	2-phase	2-phase	2-phase	2-phase	2-phase	2-phase	2-phase
Voltage Specifications	-	AC100 Specification ～ AC200 Specification	DC Specification	AC200 Specification ～ DC Specification	DC Specification	AC200 Specification ～ DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification
Control Method	-	Open Loop	Open Loop	Open Loop / Closed Loop	Open Loop	Closed Loop	Open Loop	Closed Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop
Step Angle(°)	-	0.0072 ～ 0.2	1.8	0.0036 ～ 0.2	0.0072 ～ 0.5	0.36	0.0144 ～ 0.2	0.0288 ～ 0.2	1.8	0.0072 ～ 0.18	0.05 ～ 1.8	0.18	1.8	0.18	-	0.9	1.8	-
Reducer	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided
Drive Method	-	Unipolar	Bipolar	Unipolar	Unipolar	Bipolar	Unipolar	-	Bipolar	Unipolar	Bipolar / Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar
Backlash(°)	-	0.12 ～ 0.75	-	0.034 ～ 1	0.034 ～ 0.42	0.05 ～ 0.75	0.034 ～ 0.75	-	-	0.05 ～ 1	0.75 ～ 1.5	2	-	2	-	-	-	-
Holding torque (classification)(N·m)	-	~0.5 ～ ~60	~1.8 ～ ~3	~0.4 ～ ~60	~0.2 ～ ~4	~0.5 ～ ~60	-	~0.4 ～ ~10	~4	~0.3 ～ ~5	~0.2 ～ ~4	-	-	-	-	-	-	-

Loading...Tải…