(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
18 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Stepper Motors 57 Series With Gearbox
MISUMI
- Stepping Motors 57 Series with Gearbox from MISUMI. - Pulse signal voltage range: 5-24V, eliminating the need to prepare 5V switching power supplies or connect current limiting resistors in series. - AC/DC universal, allowing for connection with straight or reversed polarity. - All series of the products adopt helical gears to increase the service life and reduce the noise. - The reduction ratio categories are complete: 3, 7.5, 10 and 15, which cover most working conditions. - Step angle is 1.8° - Driver Output Current(A): 1.0-4.3 A - Driver Power Voltage(v): VDC24-80 or VAC20-60
From: 1,111,325 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
ORIENTAL MOTOR
This is an individual motor (component) of the stepper motor unit.
From: 6,188,601 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) |
You can add up to 6 items per a category to the compare list.
High Torque 2-Phase Stepping Motor, Standard type, PKP Series
ORIENTAL MOTOR
[Features]・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size
From: 20,704,194 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) |
You can add up to 6 items per a category to the compare list.
From: 3,623,813 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) |
You can add up to 6 items per a category to the compare list.
New 5th Phase Stepper Motor Unit RKII Series
ORIENTAL MOTOR
Unimaginable high performance of stepper motors so far. The driver uses full digital control to maximize the performance of the motor. A motor with unprecedented high efficiency, low heat generation and low vibration. Space-saving, easy wiring, and improved ease of use such as of protection function.
From: 10,550,325 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORIENTAL MOTOR
[Features]・ Equipped with a newly developed ABZO sensor・ No external sensor required・ Reduction of origin return time・ No battery required・ Energy saving and low heat generation・ Three drivers to choose from to match your system configuration・ Easy operation that can be realized with the data setting software MEXE02
From: 12,889,611 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) |
You can add up to 6 items per a category to the compare list.
ORIENTAL MOTOR
The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.[Features]・ Lineup of products with encoders (CRK only)・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)
From: 8,032,832 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORIENTAL MOTOR
- Stepping motor and accessory of CSK series from ORIENTAL MOTOR. - High torque, The PK high torque motor was designed to produce high torque in a compact frame size. - Vibration and noise levels low. - Compact package, Both the motor and driver are designed to be compact, making them perfect for reducing the size and weight of machines. - High resolution, the 5-phase stepping motors have 0.72˚ per step in full-step mode and 0.36˚ per step in half-step mode.
From: 6,957,184 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) or more |
You can add up to 6 items per a category to the compare list.
86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°
FULLING MOTOR
- 86 series 2-phase gearbox equipped with a high torque stepping motor with 1.8° step from FULLING MOTOR. - Step angle: 1.8° - Step angle accuracy: ± 5% (full step, no load) - Resistance accuracy: ± 10% (20℃) - Inductance accuracy: ± 20% (1kHz) - Temperature Rise: 80℃ Max. - Ambient Temperature: -20℃~+50℃ - Insulation Resistance: 100MΩ Min. ,500VDC - Dielectric Strength: 820VAC, 1s, 3mA - Max. radial force: 220N (20mm from the flange) - Max. axial force: 60N
From: 3,548,500 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series
ORIENTAL MOTOR
[Features]・ New high torque 2-phase stepper motor PKP Series・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures・ Backlash is smaller than conventional products. Also, wider speed range and easier to use
From: 3,350,158 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stepper Motor With Built-in Controller, SSA-TR Series
SHINANOKENSHI
<Features>● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.● It is easy to set the operation with the included dedicated application.● Various operations can be programmed in 8 tables.● Micro step division (1, 2, 4, 16) selectable from 4 levels.● Design with special bracket for high heat dissipation.<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.
From: 7,500,524 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORIENTAL MOTOR
- Stepping Motor, UPKW Series from ORIENTAL MOTOR. - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation. - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).
From: 6,410,055 VND |
---|
Days to Ship: Số ngày giao hàng: 19 Day(s) |
You can add up to 6 items per a category to the compare list.
Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series
SHINANOKENSHI
Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DVC24V.Error output function.· Abundant protection functions (excess heating, voltage and current).
From: 8,070,814 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Speed Controller Built-in Stepper Motor "SSA-VR Series"
SHINANOKENSHI
<Features>● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.● Abnormal rotation detection and automatic recovery are possible with the motor alone.● Speed control is made simple with analog input.● Wide speed control range (0 to 1800r/min).<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.
From: 8,517,145 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SHINANOKENSHI
[Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.
From: 14,555,084 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Step out detection driver & stepping motor set CSA-BX series
SHINANOKENSHI
Step-out detection, closed loop switchable by switch[Features]· Step-out detection and closed loop mode can be toggled by switch.· Step-out detection possible (synchronization loss detection mode) using open loop control.· Equipped with step-out prevention function (closed loop mode) using closed-loop control.· Motor startup with speed filter, vibration reduction possible at stopping time.· 4 step resolution (400, 800, 1600, 3200P/R).· 13 step current setting: 0.6 to 3.0A· Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).· Input power supply: DC24V.· Auto power down function.
From: 9,204,902 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series
SHINANOKENSHI
[Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70XH90XD33 mm, 190 g.
From: 12,358,907 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
SHINANOKENSHI
Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DC24V.· Error output function.· Abundant protection functions (excess heating, voltage and current).
From: 9,706,340 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
Type Details |
Square Flange Size A(mm) |
Power Supply |
Voltage Specifications |
Control Method |
Step Angle(°) |
Reducer |
Drive Method |
Backlash(°) |
Holding torque (classification)(N·m) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | MISUMI | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | FULLING MOTOR | ORIENTAL MOTOR | SHINANOKENSHI | ORIENTAL MOTOR | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI |
Product SeriesDòng sản phẩm | High Torque 2-Phase Stepping Motor, Standard type, PKP Series | 86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8° | High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series | Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series | Step out detection driver & stepping motor set CSA-BX series | Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series | Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit | |||||||||||
CADCAD |
|
| ||||||||||||||||
From | 1,111,325 VND | 6,188,601 VND | 20,704,194 VND | 3,623,813 VND | 10,550,325 VND | 12,889,611 VND | 8,032,832 VND | 6,957,184 VND | 3,548,500 VND | 3,350,158 VND | 7,500,524 VND | 6,410,055 VND | 8,070,814 VND | 8,517,145 VND | 14,555,084 VND | 9,204,902 VND | 12,358,907 VND | 9,706,340 VND |
Days to ShipSố ngày giao hàng | Same day | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) or more | 19 Day(s) | 19 Day(s) or more | 19 Day(s) or more | 15 Day(s) or more | 19 Day(s) or more | 9 Day(s) or more | 19 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
Type Details | Motor Only / Set | Motor Only | Motor Only | Motor Only | Motor Only / Set | Motor Only | Motor Only / Set | Set | Motor Only | Motor Only / Set | Motors | Motor Only | Set | Motors | Set | Set | Set | Set |
Square Flange Size A(mm) | - | 28 ~ 90 | 42 | 42 ~ 60 | 42 ~ 90 | 28 ~ 90 | 20 ~ 60 | 42 ~ 60 | 86 | 28 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 | 42 ~ 60 |
Power Supply | - | - | 2-phase | 2-phase ~ 5-phase | Single-phase | Single-phase / 3-phase ~ Single-phase | 5-phase | DC | 2-phase | 2-phase | 2-phase | 5-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase |
Voltage Specifications | - | AC200 Specification ~ DC Specification | DC Specification | DC Specification | AC100 Specification ~ AC200 Specification | AC200 Specification ~ DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification |
Control Method | - | Open Loop / Closed Loop | Open Loop | Open Loop | Open Loop | Closed Loop | Open Loop | Closed Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop |
Step Angle(°) | - | 0.0036 ~ 0.2 | 1.8 | 0.0072 ~ 0.5 | 0.0072 ~ 0.2 | 0.36 | 0.0072 ~ 0.18 | 0.0288 ~ 0.2 | 1.8 | 0.05 ~ 1.8 | 0.18 | 0.0144 ~ 0.2 | 1.8 | 0.18 | - | 0.9 | - | 1.8 |
Reducer | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided |
Drive Method | - | Unipolar | Bipolar | Unipolar | Unipolar | Bipolar | Unipolar | - | Bipolar | Bipolar / Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar |
Backlash(°) | - | 0.034 ~ 1 | - | 0.034 ~ 0.42 | 0.12 ~ 0.75 | 0.05 ~ 0.75 | 0.05 ~ 1 | - | - | 0.75 ~ 1.5 | 2 | 0.034 ~ 0.75 | - | 2 | - | - | - | - |
Holding torque (classification)(N·m) | - | ~0.4 ~ ~60 | ~1.8 ~ ~3 | ~0.2 ~ ~4 | ~0.5 ~ ~60 | ~0.5 ~ ~60 | ~0.3 ~ ~5 | ~0.4 ~ ~10 | ~4 | ~0.2 ~ ~4 | - | - | - | - | - | - | - | - |
Loading...Tải…
* -0.2 represents > 0.1/≤ 0.2.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy