• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor for Units

  ORIENTAL MOTOR

  This is an individual motor (component) of the stepper motor unit.

  From: 2,235,766 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Torque 2-Phase Stepping Motor, Standard type, PKP Series

  ORIENTAL MOTOR

  [Features]・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size

  From: 1,297,153 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, PK Series

  ORIENTAL MOTOR

  Oriental Motor, stepper motor PK Series.

  From: 1,509,341 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New 5th Phase Stepper Motor Unit RKII Series

  ORIENTAL MOTOR

  Unimaginable high performance of stepper motors so far. The driver uses full digital control to maximize the performance of the motor. A motor with unprecedented high efficiency, low heat generation and low vibration. Space-saving, easy wiring, and improved ease of use such as of protection function.

  From: 4,529,225 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, UPKW Series

  ORIENTAL MOTOR

  - Stepping Motor, UPKW Series from ORIENTAL MOTOR. - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation. - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).

  From: 2,561,366 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor, CRK Series

  ORIENTAL MOTOR

  The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.[Features]・ Lineup of products with encoders (CRK only)・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)

  From: 2,772,035 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series

  ORIENTAL MOTOR

  [Features]・ New high torque 2-phase stepper motor PKP Series・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available・ Please choose the ideal motor according to your design scene・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures・ Backlash is smaller than conventional products. Also, wider speed range and easier to use

  From: 3,350,158 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepper Motor With Built-in Controller, SSA-TR Series

  SHINANOKENSHI

  <Features>● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.● It is easy to set the operation with the included dedicated application.● Various operations can be programmed in 8 tables.● Micro step division (1, 2, 4, 16) selectable from 4 levels.● Design with special bracket for high heat dissipation.<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.

  From: 5,521,525 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Speed Controller Built-in Stepper Motor "SSA-VR Series"

  SHINANOKENSHI

  <Features>● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.● Abnormal rotation detection and automatic recovery are possible with the motor alone.● Speed control is made simple with analog input.● Wide speed control range (0 to 1800r/min).<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

  • Volume Discount

  From: 6,509,145 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  86 series 3-phase hybrid type stepping motor with a step angle of 1.2°

  FULLING MOTOR

  - 86 series 3-phase hybrid type stepping motor with 1.2° step from FULLING MOTOR. - Step angle: 1.2° - Step angle accuracy: ± 5% (full step, no load) - Resistance accuracy: ± 10% (20℃) - Inductance accuracy: ± 20% (1kHz) - Temperature Rise: 80℃ Max. (rated current) - Ambient Temperature: -20℃～+50℃ - Insulation Resistance: 100MΩ Min. ,500VDC - Dielectric Strength: 1800VAC, 1s, 5mA - Max. radial force: 220N (20mm from the flange) - Max. axial force: 60N

  • Volume Discount

  CAD ：

  2D / 3D

  From: 5,920,793 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  57 series 3-phase hybrid type stepping motor with a step angle of 1.2°

  FULLING MOTOR

  - 57 series 3-phase hybrid type stepping motor with 1.2° step from FULLING MOTOR. - Step angle: 1.2° - Step angle accuracy: ± 5% (full step, no load) - Resistance accuracy: ± 10% (20℃) - Inductance accuracy: ± 20% (1kHz) - Temperature Rise: 80℃ Max. - Ambient Temperature: -20℃～+50℃ - Insulation Resistance: 100MΩ Min. ,500VDC - Dielectric Strength: 500VAC for one minute - Max. radial force: 75N (20mm from the flange) - Max. axial force: 15N

  • Volume Discount

  CAD ：

  2D / 3D

  From: 1,371,250 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-

  FULLING MOTOR

  - Size 110mm 3-Phase Hybrid Stepping Motor from FULLING MOTOR - Step angle: 1.2° - Step angle accuracy: ± 5% (full step, no load) - Resistance accuracy: ± 10% - Inductance accuracy: ± 20% - Temperature Rise: 100℃ Max. (rated current) - Ambient Temperature: -20℃～+50℃ - Insulation Resistance: 100MΩ Min. ,500VDC - Dielectric Strength: 1800VAC, 1s ,5mA - Max. radial force: 330N (20mm from the flange) - Max. axial force: 100N - Insulation class: F

  CAD ：

  2D / 3D

  From: 7,117,500 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Phase Stepper Motor Driver (Unipolar Micro-Stepper)

  AUTONICS

  From: 1,997,458 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series

  SHINANOKENSHI

  Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DVC24V.Error output function.· Abundant protection functions (excess heating, voltage and current).

  From: 6,036,733 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANOKENSHI

  [Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  From: 10,486,923 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  5-Phase Micro step driver and stepping motor set CSA-UB series

  SHINANOKENSHI

  5 phase equivalency at with 2 phases at low cost[Features]· 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.· A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).· Choose from 16 levels (1 to 128).· 16 step current setting: 0 to 3.0A (Max).· With forward rotation / reverse rotation limit input.· Auto power down function

  • Volume Discount

  From: 4,239,643 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Step out detection driver & stepping motor set CSA-BX series

  SHINANOKENSHI

  Step-out detection, closed loop switchable by switch[Features]· Step-out detection and closed loop mode can be toggled by switch.· Step-out detection possible (synchronization loss detection mode) using open loop control.· Equipped with step-out prevention function (closed loop mode) using closed-loop control.· Motor startup with speed filter, vibration reduction possible at stopping time.· 4 step resolution (400, 800, 1600, 3200P/R).· 13 step current setting: 0.6 to 3.0A· Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).· Input power supply: DC24V.· Auto power down function.

  • Volume Discount

  From: 7,225,706 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANOKENSHI

  Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DC24V.· Error output function.· Abundant protection functions (excess heating, voltage and current).

  From: 7,672,260 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series

  SHINANOKENSHI

  [Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70XH90XD33 mm, 190 g.

  From: 8,290,746 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Type Details
Square Flange Size A(mm)
Power Supply
Voltage Specifications
Control Method
Step Angle(°)
Reducer
Drive Method
Backlash(°)
Holding torque (classification)(N·m)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	ORIENTAL MOTOR	SHINANOKENSHI	SHINANOKENSHI	FULLING MOTOR	FULLING MOTOR	FULLING MOTOR	AUTONICS	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI	SHINANOKENSHI
Product SeriesDòng sản phẩm	Stepper Motor for Units	High Torque 2-Phase Stepping Motor, Standard type, PKP Series	Stepper Motor, PK Series	New 5th Phase Stepper Motor Unit RKII Series	Stepper Motor, UPKW Series	Stepper Motor, CRK Series	High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series	Stepper Motor With Built-in Controller, SSA-TR Series	Speed Controller Built-in Stepper Motor "SSA-VR Series"	86 series 3-phase hybrid type stepping motor with a step angle of 1.2°	57 series 3-phase hybrid type stepping motor with a step angle of 1.2°	110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-	2-Phase Stepper Motor Driver (Unipolar Micro-Stepper)	Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series	2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit	5-Phase Micro step driver and stepping motor set CSA-UB series	Step out detection driver & stepping motor set CSA-BX series	Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit	Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series
CADCAD										2D / 3D	2D / 3D	2D / 3D
From	2,235,766 VND	1,297,153 VND	1,509,341 VND	4,529,225 VND	2,561,366 VND	2,772,035 VND	3,350,158 VND	5,521,525 VND	6,509,145 VND	5,920,793 VND	1,371,250 VND	7,117,500 VND	1,997,458 VND	6,036,733 VND	10,486,923 VND	4,239,643 VND	7,225,706 VND	7,672,260 VND	8,290,746 VND
Days to ShipSố ngày giao hàng	14 Day(s) or more	14 Day(s) or more	Same day or more	19 Day(s) or more	19 Day(s)	14 Day(s) or more	19 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s)	7 Day(s) or more	7 Day(s) or more	4 Day(s)	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Type Details	Motor Only	Motor Only	Motor Only	Motor Only / Set	Motor Only	Motor Only / Set	Motor Only / Set	Motors	Motors	Motor Only	Motor Only	Motor Only	-	Set	Set	Set	Set	Set	Set
Square Flange Size A(mm)	20 ～ 90	20 ～ 85	20 ～ 85	42 ～ 90	42 ～ 60	20 ～ 60	28 ～ 60	42 ～ 60	42 ～ 60	86	57	110	-	28 ～ 60	28 ～ 60	28 ～ 60	42 ～ 60	28 ～ 60	28 ～ 60
Power Supply	-	2-phase	2-phase	Single-phase	5-phase	5-phase	2-phase	2-phase	2-phase	3-phase	3-phase	3-phase	2-phase	2-phase	2-phase	2-phase	2-phase	2-phase	2-phase
Voltage Specifications	AC200 Specification ～ DC Specification	DC Specification	DC Specification	AC100 Specification ～ AC200 Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	-	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification	DC Specification
Control Method	Open Loop / Closed Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	Open Loop	-	Open Loop	Open Loop	-	Open Loop	Open Loop	Open Loop
Step Angle(°)	0.0036 ～ 0.72	0.9 ～ 1.8	0.05 ～ 1.8	0.0072 ～ 0.72	0.0144 ～ 0.72	0.0072 ～ 0.72	0.05 ～ 1.8	0.18 ～ 1.8	0.18 ～ 1.8	1.2	1.2	1.2	1.8° per step	1.8	-	1.8	0.9	1.8	-
Reducer	Not Provided / Provided	Not Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Provided	Not Provided / Provided	Not Provided / Provided	Not Provided	Not Provided	Not Provided	-	Not Provided / Provided	Not Provided / Provided	Not Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided
Drive Method	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar	Unipolar
Backlash(°)	0.034 ～ 1	-	-	0.12 ～ 0.75	0.034 ～ 0.75	0.05 ～ 1	0.75 ～ 1.5	2	2	-	-	-	-	-	-	-	-	-	-
Holding torque (classification)(N·m)	0.1 or Less ～ ~60	0.1 or Less ～ ~10	0.1 or Less ～ ~4	~0.2 ～ ~60	0.1 or Less ～ ~0.8	0.1 or Less ～ ~5	~0.2 ～ ~4	~0.3 ～ ~0.9	~0.3 ～ ~0.9	~5	~1	~15	-	0.1 or Less ～ ~3	0.1 or Less ～ ~3	0.1 or Less ～ ~3	~0.3 ～ ~1.4	0.1 or Less ～ ~3	0.1 or Less ～ ~3

Loading...Tải…