• You can add up to 6 items per a category to the compare list. Compare

  

  LD holder (To-Package type)

  SURUGA SEIKI

  [Features]· A To-Package type LD holder with a built-in Peltier element.· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.· For common anodes and common cathodes, etc., configure by replacing the jumper pins.· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.· The F129-1 water cooling adapter is also available.· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  CAD ：

  2D / 3D

  From: 20,670,112 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LD Holder

  SURUGA SEIKI

  F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

  CAD ：

  2D / 3D

  From: 2,687,976 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LD Holder (Chip Carrier Type)

  SURUGA SEIKI

  [Features]· A Chip Carrier type LD holder with a built-in Peltier element.· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.· The F129-1 water cooling adapter is also available.· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  CAD ：

  2D / 3D

  From: 20,670,112 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sensor/laser holder

  SURUGA SEIKI

  [Features]· Can adjust the tilt angle of small sensors and laser pointers.· P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

  CAD ：

  2D / 3D

  From: 4,459,042 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Laser Holder

  SURUGA SEIKI

  [Features]· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).· The F20 can be attached directly to the breadboard (A65) by removing the rod.

  CAD ：

  2D / 3D

  From: 4,512,353 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Water cooling adapter

  SURUGA SEIKI

  [Features]· A water cooling adapter for F125/F126/F127 LD holders· Connect to water tanks which circulate water at low temperatures to enable superior temperature stability and low temperature control.· Connect using a 1/4 inch hose (hose not included)

  CAD ：

  2D / 3D

  From: 3,578,722 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI
Product SeriesDòng sản phẩm	LD holder (To-Package type)	LD Holder	LD Holder (Chip Carrier Type)	Sensor/laser holder	Round Laser Holder	Water cooling adapter
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	20,670,112 VND	2,687,976 VND-	20,670,112 VND	4,459,042 VND	4,512,353 VND-	3,578,722 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	9 Day(s) or more	11 Day(s) or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more

Loading...Tải…