SANKO MFG Square HSS End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  VS2T, 2-Flute Short Blade

  SANKO MFG

  A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 60	2 ～ 85	6 ～ 42	2	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 376,717 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαM P Coating Xα Nick Regular Flute

  SANKO MFG

  [Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	15 ～ 100	6 ～ 32	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,336,512 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSα S Coating S-Tech α Nick

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	10 ～ 65	6 ～ 32	4 ～ 6	70 ～ 185	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,203,727 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank for SM Keyway

  SANKO MFG

  Endmill dedicated for key groove machining. The outer diameter tolerance is positive.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Cobalt HSS	-	-

  From: 466,225 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SL Slotting Regular Flute

  SANKO MFG

  A straight blade type 2-flutes end mill.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Straight Blade

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 49	10 ～ 60	6 ～ 32	2	60 ～ 170	general steel[○] / Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	No torsion	Available	Cobalt HSS	-	-

  From: 414,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2T S Coating S-TEC 2-Flute Short Flute

  SANKO MFG

  2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 697,174 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2TL ESTECH 2-Flute Long Blade

  SANKO MFG

  [Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 105	6 ～ 25	2	55 ～ 185	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 826,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VSM2T 2-Flute Regular

  SANKO MFG

  A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 14	10 ～ 35	6 ～ 12	2	50 ～ 90	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 444,678 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 838,222 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαS, S Coating Fine Pitch Short Flute

  SANKO MFG

  Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	10 ～ 80	6 ～ 42	4 ～ 6	70 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,189,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αL S-Coated Alpha Nick Long Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 50	65 ～ 200	16 ～ 42	4 ～ 6	145 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 4,034,521 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αLα Nick Long Flute

  SANKO MFG

  A standard pitch type roughing end mill. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 60	65 ～ 300	16 ～ 42	4 ～ 6	145 ～ 420	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,697,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αFS α Flat Nick Roughing Short Blade

  SANKO MFG

  A flat nick type roughing end mill. Semi-finishing is possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	25 ～ 80	10 ～ 42	4 ～ 6	90 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,160,448 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB2TS Hybrid Short 2-Flute Blade

  SANKO MFG

  A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.[Features]· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	10 ～ 55	8 ～ 25	2	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 763,862 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS2T, P Coating 2-Flute Short Flute

  SANKO MFG

  [Features]· P coating provides excellent surface flatness and abrasion resistance.· A 2-flute end mill for finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	8 ～ 55	6 ～ 25	2	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 526,028 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TM S Coating Estech 2-Flute Regular Blade

  SANKO MFG

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of machining applications, due to the regular flute length.· High grade powder metallurgy HSS with S-coating.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	10 ～ 55	6 ～ 20	2	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 697,174 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TL S Coated Estech 2-Flute Long

  SANKO MFG

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	2	55 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 847,861 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2T ESTECH 2-Flute Short Blade

  SANKO MFG

  [Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 712,596 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2TM ESTECH 2-Flute Regular Blade

  SANKO MFG

  [Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	10 ～ 55	6 ～ 20	2	60 ～ 130	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 679,469 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 2-Flute Long Flute

  SANKO MFG

  A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 250	6 ～ 42	2	60 ～ 345	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 493,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS3T P Coated 3-Flute Short Blade

  SANKO MFG

  [Features]· A 3-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	10 ～ 55	6 ～ 25	3	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 575,011 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS4T, P Coating 4-Flute Short Flute

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	10 ～ 55	6 ～ 25	4	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 575,011 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4T S Coating STEC 4-Flute Short

  SANKO MFG

  [Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 911,006 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4TL S Coating S TECH 4-Flute Long Flute

  SANKO MFG

  [Features]· 4-flute finishing endmill with TiCN coating.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	4	55 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 947,098 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC4T ESTECH 4-Flute Short Blade

  SANKO MFG

  [Features]· Uses high grade powder metallurgy HSS.· Ideal for finish machining.· A 4-flute end mill for finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 652,322 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC4TL S TECH 4-Flute Long Flute

  SANKO MFG

  A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 105	6 ～ 32	4	55 ～ 190	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 904,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS4T, 4-Flute Short Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	10 ～ 85	6 ～ 42	4	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 412,127 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VSM4T 4-Flute Regular Flute

  SANKO MFG

  A 4-flute end mill for finish machining. The outer diameter tolerance is positive.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 412,127 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 4-Flute Long Flute

  SANKO MFG

  A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	20 ～ 300	6 ～ 42	4	60 ～ 395	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 526,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSM S Coated Estech Muscle 3-Flute Regular

  SANKO MFG

  [Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	15 ～ 55	8 ～ 32	3	65 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	17 ～ 65	-

  From: 1,013,800 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSML S Coated Estech Muscle 3-Flute Long

  SANKO MFG

  [Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· A wide range of machining is possible, from heavy duty cutting to finishing machining.· Enables deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3	75 ～ 190	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side	TiCN	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	27 ～ 115	-

  From: 1,205,036 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HiVA Powder High-Speed Steel High-Helix

  SANKO MFG

  [Features]· Powder HSS is adopted.· A high helical type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	8 ～ 65	6 ～ 32	2 ～ 4	60 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	10 ～ 65	-

  From: 627,338 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HV4TLS 4-Flute Blade High Helix Long Shank

  SANKO MFG

  A high helical type end mill. A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	55 ～ 90	16 ～ 42	4	200 ～ 320	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	Available	Cobalt HSS	-	-

  From: 2,131,653 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαS P Coating Xα Nick Short Flute

  SANKO MFG

  A semi-fine pitch type roughing end mill. Excellent chip discharge.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	10 ～ 80	6 ～ 42	4 ～ 6	70 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,057,564 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSαM S Coating Estech α Nick Regular Flute

  SANKO MFG

  [Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	15 ～ 120	6 ～ 42	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,625,760 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSα L S Coated Estech α Nick Long Blade

  SANKO MFG

  [Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	30 ～ 150	6 ～ 42	4 ～ 6	80 ～ 250	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,833,730 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSαLS S Coated Estech α Nick Long Shank

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	40 ～ 75	16 ～ 42	4 ～ 6	180 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 2,871,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	15 ～ 120	6 ～ 42	4 ～ 6	80 ～ 240	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,488,380 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαL S-Coating Fine Pitch Long Flute

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	100 ～ 270	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,445,814 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αS S-Coating α Nick Short Flute

  SANKO MFG

  [Features]· Standard pitch type roughing endmill with TiCN coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	10 ～ 80	6 ～ 42	4 ～ 6	70 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,189,563 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αM S-Coated Alpha Nick Regular Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	35 ～ 120	10 ～ 42	4 ～ 6	100 ～ 240	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,826,147 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αH S Coating α Nick Hard Type

  SANKO MFG

  Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	8 ～ 75	6 ～ 42	4 ～ 6	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,137,432 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αHM S-Coated Alpha Nick Hard Type Regular Blade

  SANKO MFG

  [Features]· Hard pitch type roughing endmill with S coating.· Ideal for heavy duty groove cutting.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 110	6 ～ 42	4 ～ 6	60 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,247,005 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SUSα S Coating for Stainless Steel Groove Processing

  SANKO MFG

  Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	5 ～ 55	6 ～ 25	3 ～ 4	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○]	Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,079,577 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αS α Nick Short Flute

  SANKO MFG

  Normal pitch type roughing end mill.Blade typeMaterials: Hs-Co (cobalt high-speed steel)Helix angle: 30°nick shape: standard pitch nick

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 60	10 ～ 95	6 ～ 42	4 ～ 6	70 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 793,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG
Product SeriesDòng sản phẩm	VS2T, 2-Flute Short Blade	P-XαM P Coating Xα Nick Regular Flute	SSα S Coating S-Tech α Nick	Straight Shank for SM Keyway	SL Slotting Regular Flute	SS2T S Coating S-TEC 2-Flute Short Flute	STEC2TL ESTECH 2-Flute Long Blade	VSM2T 2-Flute Regular	KHB4TS Hybrid Short 4-Flute Blade	S-FPαS, S Coating Fine Pitch Short Flute	S-αL S-Coated Alpha Nick Long Blade	αLα Nick Long Flute	αFS α Flat Nick Roughing Short Blade	KHB2TS Hybrid Short 2-Flute Blade	P-VS2T, P Coating 2-Flute Short Flute	SS2TM S Coating Estech 2-Flute Regular Blade	SS2TL S Coated Estech 2-Flute Long	STEC2T ESTECH 2-Flute Short Blade	STEC2TM ESTECH 2-Flute Regular Blade	LVS2T, 2-Flute Long Flute	P-VS3T P Coated 3-Flute Short Blade	P-VS4T, P Coating 4-Flute Short Flute	SS4T S Coating STEC 4-Flute Short	SS4TL S Coating S TECH 4-Flute Long Flute	STEC4T ESTECH 4-Flute Short Blade	STEC4TL S TECH 4-Flute Long Flute	VS4T, 4-Flute Short Blade	VSM4T 4-Flute Regular Flute	LVS2T, 4-Flute Long Flute	SSM S Coated Estech Muscle 3-Flute Regular	SSML S Coated Estech Muscle 3-Flute Long	HiVA Powder High-Speed Steel High-Helix	HV4TLS 4-Flute Blade High Helix Long Shank	P-XαS P Coating Xα Nick Short Flute	SSαM S Coating Estech α Nick Regular Flute	SSα L S Coated Estech α Nick Long Blade	SSαLS S Coated Estech α Nick Long Shank	S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)	S-FPαL S-Coating Fine Pitch Long Flute	S-αS S-Coating α Nick Short Flute	S-αM S-Coated Alpha Nick Regular Blade	S-αH S Coating α Nick Hard Type	S-αHM S-Coated Alpha Nick Hard Type Regular Blade	S-SUSα S Coating for Stainless Steel Groove Processing	αS α Nick Short Flute
From	376,717 VND-	1,336,512 VND-	1,203,727 VND-	466,225 VND-	414,488 VND-	697,174 VND-	826,418 VND-	444,678 VND-	838,222 VND-	1,189,563 VND-	4,034,521 VND-	2,697,418 VND-	1,160,448 VND-	763,862 VND-	526,028 VND-	697,174 VND-	847,861 VND-	712,596 VND-	679,469 VND-	493,471 VND-	575,011 VND-	575,011 VND-	911,006 VND-	947,098 VND-	652,322 VND-	904,123 VND-	412,127 VND-	412,127 VND-	526,028 VND-	1,013,800 VND-	1,205,036 VND-	627,338 VND-	2,131,653 VND-	1,057,564 VND-	1,625,760 VND-	1,833,730 VND-	2,871,712 VND-	1,488,380 VND-	2,445,814 VND-	1,189,563 VND-	1,826,147 VND-	1,137,432 VND-	1,247,005 VND-	1,079,577 VND-	793,873 VND-
Days to ShipSố ngày giao hàng	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Blade diameter (D)(φ)	1 ～ 60	5 ～ 40	5 ～ 40	3 ～ 25	2 ～ 49	1 ～ 40	3 ～ 30	3 ～ 14	5 ～ 30	5 ～ 50	14 ～ 50	14 ～ 60	10 ～ 50	5 ～ 30	3 ～ 30	3 ～ 20	3 ～ 40	1 ～ 40	3 ～ 20	3 ～ 50	3 ～ 30	3 ～ 30	3 ～ 40	3 ～ 40	3 ～ 40	3 ～ 40	3 ～ 60	3 ～ 40	3 ～ 60	6 ～ 30	6 ～ 30	3 ～ 40	20 ～ 50	5 ～ 50	5 ～ 50	6 ～ 50	16 ～ 50	5 ～ 50	10 ～ 50	5 ～ 50	10 ～ 50	5 ～ 50	6 ～ 50	3 ～ 30	5 ～ 60
Blade length (ℓ)(mm)	2 ～ 85	15 ～ 100	10 ～ 65	5 ～ 25	10 ～ 60	2 ～ 65	15 ～ 105	10 ～ 35	15 ～ 55	10 ～ 80	65 ～ 200	65 ～ 300	25 ～ 80	10 ～ 55	8 ～ 55	10 ～ 55	15 ～ 105	2 ～ 65	10 ～ 55	20 ～ 250	10 ～ 55	10 ～ 55	10 ～ 65	15 ～ 105	10 ～ 65	15 ～ 105	10 ～ 85	10 ～ 65	20 ～ 300	15 ～ 55	25 ～ 105	8 ～ 65	55 ～ 90	10 ～ 80	15 ～ 120	30 ～ 150	40 ～ 75	15 ～ 120	45 ～ 150	10 ～ 80	35 ～ 120	8 ～ 75	15 ～ 110	5 ～ 55	10 ～ 95
Shank diameter (d)(mm)	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 12	8 ～ 25	6 ～ 42	16 ～ 42	16 ～ 42	10 ～ 42	8 ～ 25	6 ～ 25	6 ～ 20	6 ～ 32	6 ～ 32	6 ～ 20	6 ～ 42	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 42	8 ～ 32	8 ～ 32	6 ～ 32	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	16 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 42
Number of flutes(sheet)	2	4 ～ 6	4 ～ 6	2	2	2	2	2	4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	2	2	2	2	2	2	2	3	4	4	4	4	4	4	4	4	3	3	2 ～ 4	4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 4	4 ～ 6
Overall Length (L)(mm)	50 ～ 185	80 ～ 220	70 ～ 185	50 ～ 95	60 ～ 170	50 ～ 150	55 ～ 185	50 ～ 90	60 ～ 135	70 ～ 200	145 ～ 320	145 ～ 420	90 ～ 200	60 ～ 135	50 ～ 135	60 ～ 130	55 ～ 190	50 ～ 150	60 ～ 130	60 ～ 345	50 ～ 135	50 ～ 135	50 ～ 150	55 ～ 190	50 ～ 150	55 ～ 190	50 ～ 185	50 ～ 150	60 ～ 395	65 ～ 150	75 ～ 190	60 ～ 150	200 ～ 320	70 ～ 200	80 ～ 220	80 ～ 250	180 ～ 320	80 ～ 240	100 ～ 270	70 ～ 200	100 ～ 240	55 ～ 165	60 ～ 200	55 ～ 165	70 ～ 210
work material	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Side / Groove / Inclined Cuts
Coating	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	TiCN	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	Non-Coated
Blade shape type	Square	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	17 ～ 65	27 ～ 115	10 ～ 65	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…