Electric Screwdrivers

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel USB Rechargeable Screwdriver

  VESSEL

  [Features]· Electric power for quick tightening and Manual for final tightening. · With High Brightness LED light. · Built in USB Recharge Li-ion Battery (3.6V-800mAh). · 6.35mm HEX shank. · [Use] · For electrical / equipment work, panel assembly, equipment / equipment maintenance, automobile / motorcycle maintenance, DIY, etc.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  2	-	5	-	-	Lever Start Type	-	280	-	140

  From: 1,065,667 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel Electric Driver 220USBP1

  VESSEL

  [Features]· The rotation speed and torque can be switched in 3 steps according to the application. · Reinforced gear and housing increase strength by 20%. · Uses USB Type-C, which allows you to connect to the charging port without hesitation because there is no directionality of the terminal. · [Use] · For electronic terminal block work, distribution board terminal work, tightening light ceiling screws and long screws, etc.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  1.2, 1.6, 2.0	-	-	-	-	Lever Start Type	-	280, 340, 400	-	147

  From: 1,394,000 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel Rechargeable Ballgrip S / D Hi-Seed 220USB-S1

  VESSEL

  [Features]·No-load rotation speed 1200 rpm. · Easy charging with USB. · High-brightness LED light (lights up for 5 seconds after use). · [Use] · For switchboard assembly and mounting of fittings and exterior parts.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.4	-	-	-	-	Lever Start Type	-	1200	-	140

  From: 1,225,334 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Low Voltage DC Type Brushless Electric Screwdriver HFB-500 Series

  KILEWS

  [Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.2～1.18 ～ 0.3～1.86	-	-	1.6~3.0 ～ 2.3~4.0	-	Push Start Type	1.6 to 2.6 ～ 2.3～3.0	-	55	238

  From: 8,902,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Brushless Screwdriver BLG Series (DC Type) Push/Lever Dual Start Type

  HIOS

  [Features]・ It has the same performance, quality, and durability as the conventional brushless (BL series), and has improved maintainability.・ A smooth, cost effective transition can be made from a screwdriver with a brush (CL, α type) to brushless (BLG type).

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.2 to 1.2	-	-	2.0 to 3.0	1.5	For Both Push/Lever	2.0 to 3.0	High: 1,000, Low: 690	-	235

  From: 11,942,175 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s)

  15 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Brushless Electric Screwdriver (Dual Start Type Push/Lever)

  HIOS

  [Features]· Counts the number of rotation pulses of the motor so that screw tightening errors are detected in real time with higher accuracy.· Won't miss the mixing in of different types of screws or floating screws.· Direct teaching has made setting simpler.· The number of screws tightened is displayed.· Capable of systemized management on screw-tightening errors thanks to the installed serial port.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.2 to 1.2	-	-	2.0 to 3.0	2	For Both Push/Lever	2.0 to 3.0	High: 1,000, Low: 690	-	235

  From: 15,942,250 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Electric Screwdriver, Standard Type Electric Driver HFD-5000 Series

  KILEWS

  [Features]· Standard type that realizes both durability and cost.· Low voltage allows for secure use.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.10～1.18	-	-	1.6~3.0	-	Push Start Type	1.6 to 2.6	-	48	230

  From: 6,965,116 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] 9K Series Electric Screwdriver

  NAKAMURASEISAKU

  High power type with high output motor.[Features]·Torque range 50-450cN⋅m.·Machine screw 2.3 to 6.0 mm.·High power type with high output motor.·Ideal for working with tapping screws.·Just push it in to start, so you can speed up your work.·For high torque applications, a pistol grip (sold separately) can be used to support the driver.·Push start type.·Stops when torque is increased.[Applications]·Tightening electronic devices and substrates.·Panel tightening for pachinko machines.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.5 to 1.8 ～ 1.5 to 4.5	-	AC100V 50/60Hz	2.3 to 4.0 ～ 4.0 to 6.0	3	Push Start Type	2.0 to 3.5 ～ 3.0 to 5.0	500 ～ 1900	46	264

  From: 17,507,589 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory: Driver Arm

  KILEWS

  [Features]· Absorbs shocks of the high torque driver.· KP-AUXA is for vertical tightening.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 16,652,736 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Controller Integrated Screw Counter For BN-200/500 Series

  KILEWS

  [Features]· Manage the number of tightened screws.· Various settings related to screw tightening can be performed to prevent human error.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	100-240 50/60Hz	-	-	-	-	-	-	-

  From: 14,758,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type

  HIOS

  [Features]· Performance, quality and durability that are in line with a conventional brushless (BL type), with improved maintainability.· A smooth, cost effective transition can be made from a screwdriver with a brush (CL, α type) to brushless (BLG type).

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.1 to 0.55	-	-	1.4 to 2.6	1.5	Lever Start Type	1.4 to 2.3	High: 1,000, Low: 690	-	206

  From: 9,519,807 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Dedicated Controller HFB-200, HFB-500 Series Compatible

  KILEWS

  [Features]· A dedicated controller for HFB-200 and HFB-500 series.· For 1 unit, HI/LO 2-step switchable.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	AC 100–240	-	-	-	-	-	-	-

  From: 3,175,071 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  Electric Screwdriver (Lever Start Type Push Start Type)

  VESSEL

  Includes an impact-absorbing gel pad: an electric screwdriver for commercial factories that can be gripped firmly.[Features]· A slotless brushless motor adopted.· There is little recoil when the motor is started.· Improves usability, tightening accuracy, and maintainability.· Ergonomic design for easy holding and reduced fatigue.· Includes a tamper-proof sleeve that prevents accidental operation after adjustments.· Uses non-contact type magnet switch to reduce wear and damage of parts.[Applications]· For production plants.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.15~1.0 ～ 0.4～1.8	-	DC32	M1.6-3.0 ～ M2.3-3.0	2	Push Start Type / Lever Start Type	1.6-2.6 ～ 2.3-3.0	HI:1000/LO:700 ～ HI: 2000 (LO has no setting)	25 ～ 55	222 ～ 250

  From: 13,291,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Suction Attachment

  HIOS

  [Features]· Accessory for suction screwdriver

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 2,057,876 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Dedicated Controller HFD-2000, 5000, 7000 Series

  KILEWS

  [Features]· A dedicated controller for HFD-2000, 5000, and 7000 series.· HI/LO 2-gear switch.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	AC 100–240	-	-	-	-	-	-	-

  From: 2,284,983 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Low Voltage DC Type Brushless Electric Screwdriver BN-500 Series

  KILEWS

  [Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.2～1.18	-	-	1.6~3.0	-	Push Start Type	1.6 to 2.6	-	55	238

  From: 9,427,703 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kanon Electric Screwdriver 9K-SWP Series

  NAKAMURASEISAKU

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.5 to 2.2 ～ 1.5 to 4.5	-	AC 100	2.3 to 4.0	-	-	2.0 to 3.5 ～ 3.0 to 5.0	1,900 ～ 700	46	264

  From: 21,527,684 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Ultra-High Torque RBK Series

  KILEWS

  [Features] · Single-action fastening for improved workability. · Powerful brushless motor and clutch-type torque control for improved work efficiency. · Stable and accurate torque repeatability. · Unique clutch mechanism provides stable torque precision that far surpasses pneumatic screwdrivers to contribute to your torque management. · Easy to set up. · Facilities such as piping are not required, simply use as is as long as you have a power source. · Does not generate oil mist because it is electric. · Since no carbon brush replacement is required and also the non-contact switch is free from contact deterioration, maintenance labor is minimized. · Reduced environmental impact · Low power consumption. Quiet design. Contributes to reducing CO2 emissions. · Can be used safely due to the low-voltage specification.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  2 to 6 ～ 6 to 18	-	-	4.0 to 5.0 ～ ≤ 10.0	-	Lever Start Type	≦ 4.0 ～ ≦ 8.0	1,200 ～ 370	100 ～ 200	298

  From: 15,586,722 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory: Flexible Driver Arm

  KILEWS

  [Features]· It eliminates the impact of the screwdriver and enables work safely.· Can be operated at any angle.· There are 4 different types according to the mounting method.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	430-1000

  From: 10,706,675 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory: Angle Attachment

  KILEWS

  [Features]· Bit mounting socket: Opposite side 6.35 mm hexagon.· Lever start type only.· Use at 70% or less of the maximum output torque.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 3,481,206 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Carbon Brush

  HIOS

  This is a peripheral component designed to be used for brush electric screwdrivers, offering good performance and durability.The range of use is up to the position of the groove on the brush surface. The carbon brush should be replaced when abrasion reaches this specified position. Upon replacement, it is necessary to replace the two places with new carbon brushes at the same time.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 219,900 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  100 VAC Electric Impact Screwdriver【1-2 Pieces Per Package】

  TRAD

  [Features]A carbon brush that can be used for the impact screwdriver TID-92N.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  92	Main Body / Related Part	100	-	5	Push Start Type	-	0～2500	250	-

  From: 241,571 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] 9K-131 Series Electric Screwdriver

  NAKAMURASEISAKU

  [Features]· Medium torque type featuring a balance between compactness and high power.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.4 to 1.5 ～ 0.5 to 2	-	AC100V 50/60Hz	2.0 to 3.5 ～ 2.6 to 4.0	3	Push Start Type / Lever Start Type	2.0 to 3.0 ～ 2.0 to 3.5	1000 ～ 2000	35	-

  From: 16,145,972 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] KD Series Electric Screwdriver

  NAKAMURASEISAKU

  [Features]· Small size and easy-grip specification due to the 29.5 mm grip diameter. (2KD series)· It does not generate heat even if continuously used, thanks to the adoption of a high-performance motor and air conditioning inside the uniquely developed driver.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.02 to 0.35 ～ 0.3 to 1.6	-	AC100V 50/60Hz	1.0 to 2.3 ～ 2.3 to 3.5	3	Lever Start Type	1.0 to 2.0 ～ 2.3 to 3.0	Hi：670、Lo：470 ～ Hi：1000、Lo：700	-	-

  From: 17,312,894 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra Small Screwdriver HFB-100 Series

  KILEWS

  [Features]· Realizes a significantly smaller size than conventional models.· Its effortless handling alleviates tiredness.· There is no need to replace the carbon brush, enabling easy maintenance.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.008～0.14 ～ 0.05~0.34	-	-	1.0–1.7 ～ 1.0~2.3	-	Lever Start Type	1.0~1.5 ～ 1.0~2.0	-	-	165

  From: 9,492,956 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Dedicated Controller HFB-100 Series Compatible

  KILEWS

  [Features]· A dedicated controller for HFB-100 series.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	AC 100–240	-	-	-	-	-	-	-

  From: 2,638,021 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Dedicated Controller HFB-800 Series Compatible

  KILEWS

  [Features]· A dedicated controller for HFB-800 series.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	AC 100–240	-	-	-	-	-	-	-

  From: 8,099,487 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AC Transformer-less Type Electric Screwdriver HFA-6000 series

  KILEWS

  [Features]· Very easy to move and install with no controller required.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.20～1.18 ～ 0.30～1.86	-	-	1.6~3.0 ～ 2.6～4.0	-	Push Start Type / Lever Start Type	1.6 to 2.6 ～ 2.6~3.0	-	38	242

  From: 7,673,990 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AC Transformer-less Type Electric Screwdriver HFA-9000 Series

  KILEWS

  Electric screwdriver with superior torque precision and easy setting and moving. [Features]· Movement and setting can be easily done without the need for a controller. Combined with a soft grip for reducing fatigue during long hours of work.· A high-powered type with a high-output motor. Push-start and lever-start types available.· Torque fixing ring included as standard. [Applications]· Can be used for work with tapping screws.· Ideal for tightening small screws from M3 to M5.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.98～2.94 ～ 1.47～4.41	-	-	3.0~5.0 ～ 4.0–6.0	-	Push Start Type / Lever Start Type	3.0–4.0 ～ 4.0–5.0	-	48	269

  From: 8,443,420 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cushion Latch Type Electric Screwdriver HS-200 Series

  KILEWS

  [Features]· Clutch starts idling when reaching set torque value.· Motor stops when the lever is released.· Electric powered so it does not suffer the same torque variation that occur due to changes in air pressure, and the torque accuracy is far better than that of general air screwdrivers.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.20～1.47 ～ 0.98～3.43	-	-	2.0–4.0 ～ 3.0~5.0	-	Lever Start Type	2.0~3.0 ～ 3.0–4.0	-	30 ～ 45	230 ～ 264

  From: 4,384,453 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Standard Type Electric Driver HFD-2000 Series

  KILEWS

  [Features]· Standard type that realizes both durability and cost.· Low voltage allows for secure use.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.05~0.69 ～ 0.10～0.98	-	-	1.4～2.6 ～ 1.6~3.0	-	Lever Start Type	1.4–2.3 ～ 1.6 to 2.6	-	25	205

  From: 7,595,511 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-high Torque Electric Screwdriver TBN Series

  KILEWS

  [Features]· Improves workability with one shot tightening. The powerful brushless motor and clutch type torque control improve work efficiency.· Unique clutch structure makes the torque accuracy vastly more stable than that of an air driver.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  3–9 ～ 6 to 18	-	-	5.0～6.0 ～ ≦10.0	-	Lever Start Type	≦4.5 ～ ≦8.0	-	120 ～ 200	274×160

  From: 17,844,950 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Dedicated Controller RBN/TBN Series

  KILEWS

  [Features]· Dedicated controller for the RBN/TBN series.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	AC 100–240	-	-	-	-	-	-	-

  From: 11,616,798 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory, Slow Start Control BOX

  KILEWS

  [Features]· Ideal for specific tightening conditions.· The rotation speed and time at start-up can both be set.· Equipped with signal output terminal.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 3,524,706 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory, Signal Control BOX

  KILEWS

  [Features]· Abundant variety of input/output terminals.· The rotation speed and time at start-up can both be set.· Can be used together with a workpiece sensor, etc.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 8,377,373 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Counter Built-in Electric Screwdriver HFB-BE500 Series

  KILEWS

  [Features]· With a screw tightening counting function, which counts the number of torques and notifies the user with a buzzer sound when the set number of tightened screws is reached.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.20～1.18 ～ 0.40～1.70	-	-	1.6~3.0 ～ 2.3~4.0	-	Push Start Type / Lever Start Type	1.6 to 2.6 ～ 2.3～3.0	-	55	270

  From: 11,693,276 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Counter Built-in Electric Screwdriver HFB-BE800 Series

  KILEWS

  [Features]· With a screw tightening counting function, which counts the number of torques and notifies the user with a buzzer sound when the set number of tightened screws is reached.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.98～2.94 ～ 1.96～4.90	-	-	3.0~5.0 ～ 4.0–6.0	-	Push Start Type / Lever Start Type	3.0–4.0 ～ 4.0–5.0	-	90 ～ 120	294

  From: 13,627,960 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Voltage DC Type Brushless Electric Screwdriver BN-200 Series

  KILEWS

  [Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.02～0.34 ～ 0.10～0.98	-	-	1.0~2.3 ～ 1.6~3.0	-	Lever Start Type	1.0~2.0 ～ 1.6 to 2.6	-	25	182

  From: 9,051,361 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Controller Integrated Screw Counter For BN-200/TBN/RBN Series

  KILEWS

  [Features]· Manage the number of tightened screws.· Various settings related to screw tightening can be performed to prevent human error.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	100-240 50/60Hz	-	-	-	-	-	-	-

  From: 19,224,750 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Low Voltage DC Type Brushless Electric Screwdriver BN-800 Series

  KILEWS

  [Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  1.96～4.90	-	-	4.0–6.0	-	Push Start Type	4.0–5.0	-	120	278

  From: 13,139,708 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Electric Screwdriver Accessory: Suspension Rack

  KILEWS

  [Features]· Insert unused screwdrivers to store.· Prevents falling from the workbench.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 191,493 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory: Screw Plate

  KILEWS

  [Features]· Accessories for electric screwdrivers.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	M1.7～M2.0 ～ M3.0～M4.0	-	-	-	-	-	-

  From: 561,895 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver Accessory: Carbon Brush【2 Pieces Per Package】

  KILEWS

  [Features]· Accessories for electric screwdrivers.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 181,556 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kanon Electric Screwdriver 9K-131-SWP Series

  NAKAMURASEISAKU

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.4 to 1.5	-	AC 100	2.0 to 3.5	-	-	2.0 to 3.5	-	35	264

  From: 20,101,306 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Screw Counter STC3 Series

  HIOS

  [Features]· Set the number of screws to tighten from 1 to 99, and with every tightening, the remaining number will be counted down.· When the last screw is tightened, a buzzer will sound, making it possible to confirm that all screws have been tightened.· After tightening is completed, it automatically resets, so it can be used again right away. Can also be controlled so that the screwdriver does not operate until the SET confirmation signal of the next is input. (Excluding SC3 series)· Prevents counting actions such as confirmation tightening, retorquing, and double tightening.· The count function can be also be turned off so that it can be used as a regular power supply.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  -	-	-	-	1.8	-	-	-	-	-

  From: 17,148,245 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Output torque(N▪m)
Product Type
Power Supply(V)
Compatible Screw: Small Screw(mm)
Cord Length(m)
Start Method
Compatible Screw: Tapping Screw(mm)
Rotation Speed(min⁻¹)
Power Consumption(W)
Overall Length(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	VESSEL	VESSEL	VESSEL	KILEWS	HIOS	HIOS	KILEWS	NAKAMURASEISAKU	KILEWS	KILEWS	HIOS	KILEWS	VESSEL	HIOS	KILEWS	KILEWS	NAKAMURASEISAKU	KILEWS	KILEWS	KILEWS	HIOS	TRAD	NAKAMURASEISAKU	NAKAMURASEISAKU	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	KILEWS	NAKAMURASEISAKU	HIOS
Product SeriesDòng sản phẩm	Vessel USB Rechargeable Screwdriver	Vessel Electric Driver 220USBP1	Vessel Rechargeable Ballgrip S / D Hi-Seed 220USB-S1	Low Voltage DC Type Brushless Electric Screwdriver HFB-500 Series	Brushless Screwdriver BLG Series (DC Type) Push/Lever Dual Start Type	Brushless Electric Screwdriver (Dual Start Type Push/Lever)	Electric Screwdriver, Standard Type Electric Driver HFD-5000 Series	[Kanon] 9K Series Electric Screwdriver	Electric Screwdriver Accessory: Driver Arm	Electric Screwdriver, Controller Integrated Screw Counter For BN-200/500 Series	Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type	Electric Screwdriver Dedicated Controller HFB-200, HFB-500 Series Compatible	Electric Screwdriver (Lever Start Type Push Start Type)	Electric Screwdriver, Suction Attachment	Electric Screwdriver Dedicated Controller HFD-2000, 5000, 7000 Series	Low Voltage DC Type Brushless Electric Screwdriver BN-500 Series	Kanon Electric Screwdriver 9K-SWP Series	Electric Screwdriver, Ultra-High Torque RBK Series	Electric Screwdriver Accessory: Flexible Driver Arm	Electric Screwdriver Accessory: Angle Attachment	Electric Screwdriver, Carbon Brush	100 VAC Electric Impact Screwdriver【1-2 Pieces Per Package】	[Kanon] 9K-131 Series Electric Screwdriver	[Kanon] KD Series Electric Screwdriver	Ultra Small Screwdriver HFB-100 Series	Electric Screwdriver Dedicated Controller HFB-100 Series Compatible	Electric Screwdriver Dedicated Controller HFB-800 Series Compatible	AC Transformer-less Type Electric Screwdriver HFA-6000 series	AC Transformer-less Type Electric Screwdriver HFA-9000 Series	Cushion Latch Type Electric Screwdriver HS-200 Series	Electric Screwdriver, Standard Type Electric Driver HFD-2000 Series	Ultra-high Torque Electric Screwdriver TBN Series	Electric Screwdriver Dedicated Controller RBN/TBN Series	Electric Screwdriver Accessory, Slow Start Control BOX	Electric Screwdriver Accessory, Signal Control BOX	Counter Built-in Electric Screwdriver HFB-BE500 Series	Counter Built-in Electric Screwdriver HFB-BE800 Series	Low Voltage DC Type Brushless Electric Screwdriver BN-200 Series	Electric Screwdriver, Controller Integrated Screw Counter For BN-200/TBN/RBN Series	Low Voltage DC Type Brushless Electric Screwdriver BN-800 Series	Electric Screwdriver Accessory: Suspension Rack	Electric Screwdriver Accessory: Screw Plate	Electric Screwdriver Accessory: Carbon Brush【2 Pieces Per Package】	Kanon Electric Screwdriver 9K-131-SWP Series	Electric Screwdriver, Screw Counter STC3 Series
From	1,065,667 VND	1,394,000 VND	1,225,334 VND	8,902,500 VND	11,942,175 VND	15,942,250 VND	6,965,116 VND	17,507,589 VND	16,652,736 VND	14,758,236 VND	9,519,807 VND	3,175,071 VND	13,291,280 VND	2,057,876 VND	2,284,983 VND	9,427,703 VND	21,527,684 VND	15,586,722 VND	10,706,675 VND	3,481,206 VND	219,900 VND	241,571 VND	16,145,972 VND	17,312,894 VND	9,492,956 VND	2,638,021 VND	8,099,487 VND	7,673,990 VND	8,443,420 VND	4,384,453 VND	7,595,511 VND	17,844,950 VND	11,616,798 VND	3,524,706 VND	8,377,373 VND	11,693,276 VND	13,627,960 VND	9,051,361 VND	19,224,750 VND	13,139,708 VND	191,493 VND	561,895 VND	181,556 VND	20,101,306 VND	17,148,245 VND
Days to ShipSố ngày giao hàng	Same day	Same day	Same day	6 Day(s) or more	15 Day(s)	9 Day(s)	6 Day(s) or more	9 Day(s) or more	4 Day(s) or more	8 Day(s) or more	14 Day(s) or more	8 Day(s) or more	9 Day(s)	6 Day(s) or more	10 Day(s) or more	8 Day(s) or more	19 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day	5 Day(s) or more	9 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	4 Day(s) or more	8 Day(s) or more	7 Day(s) or more	4 Day(s) or more	13 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	19 Day(s)	24 Day(s) or more
Output torque(N▪m)	2	1.2, 1.6, 2.0	0.4	0.2～1.18 ～ 0.3～1.86	0.2 to 1.2	0.2 to 1.2	0.10～1.18	0.5 to 1.8 ～ 1.5 to 4.5	-	-	0.1 to 0.55	-	0.15~1.0 ～ 0.4～1.8	-	-	0.2～1.18	0.5 to 2.2 ～ 1.5 to 4.5	2 to 6 ～ 6 to 18	-	-	-	92	0.4 to 1.5 ～ 0.5 to 2	0.02 to 0.35 ～ 0.3 to 1.6	0.008～0.14 ～ 0.05~0.34	-	-	0.20～1.18 ～ 0.30～1.86	0.98～2.94 ～ 1.47～4.41	0.20～1.47 ～ 0.98～3.43	0.05~0.69 ～ 0.10～0.98	3–9 ～ 6 to 18	-	-	-	0.20～1.18 ～ 0.40～1.70	0.98～2.94 ～ 1.96～4.90	0.02～0.34 ～ 0.10～0.98	-	1.96～4.90	-	-	-	0.4 to 1.5	-
Product Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Main Body / Related Part	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Power Supply(V)	5	-	-	-	-	-	-	AC100V 50/60Hz	-	100-240 50/60Hz	-	AC 100–240	DC32	-	AC 100–240	-	AC 100	-	-	-	-	100	AC100V 50/60Hz	AC100V 50/60Hz	-	AC 100–240	AC 100–240	-	-	-	-	-	AC 100–240	-	-	-	-	-	100-240 50/60Hz	-	-	-	-	AC 100	-
Compatible Screw: Small Screw(mm)	-	-	-	1.6~3.0 ～ 2.3~4.0	2.0 to 3.0	2.0 to 3.0	1.6~3.0	2.3 to 4.0 ～ 4.0 to 6.0	-	-	1.4 to 2.6	-	M1.6-3.0 ～ M2.3-3.0	-	-	1.6~3.0	2.3 to 4.0	4.0 to 5.0 ～ ≤ 10.0	-	-	-	-	2.0 to 3.5 ～ 2.6 to 4.0	1.0 to 2.3 ～ 2.3 to 3.5	1.0–1.7 ～ 1.0~2.3	-	-	1.6~3.0 ～ 2.6～4.0	3.0~5.0 ～ 4.0–6.0	2.0–4.0 ～ 3.0~5.0	1.4～2.6 ～ 1.6~3.0	5.0～6.0 ～ ≦10.0	-	-	-	1.6~3.0 ～ 2.3~4.0	3.0~5.0 ～ 4.0–6.0	1.0~2.3 ～ 1.6~3.0	-	4.0–6.0	-	M1.7～M2.0 ～ M3.0～M4.0	-	2.0 to 3.5	-
Cord Length(m)	-	-	-	-	1.5	2	-	3	-	-	1.5	-	2	-	-	-	-	-	-	-	-	5	3	3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.8
Start Method	Lever Start Type	Lever Start Type	Lever Start Type	Push Start Type	For Both Push/Lever	For Both Push/Lever	Push Start Type	Push Start Type	-	-	Lever Start Type	-	Push Start Type / Lever Start Type	-	-	Push Start Type	-	Lever Start Type	-	-	-	Push Start Type	Push Start Type / Lever Start Type	Lever Start Type	Lever Start Type	-	-	Push Start Type / Lever Start Type	Push Start Type / Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	-	-	-	Push Start Type / Lever Start Type	Push Start Type / Lever Start Type	Lever Start Type	-	Push Start Type	-	-	-	-	-
Compatible Screw: Tapping Screw(mm)	-	-	-	1.6 to 2.6 ～ 2.3～3.0	2.0 to 3.0	2.0 to 3.0	1.6 to 2.6	2.0 to 3.5 ～ 3.0 to 5.0	-	-	1.4 to 2.3	-	1.6-2.6 ～ 2.3-3.0	-	-	1.6 to 2.6	2.0 to 3.5 ～ 3.0 to 5.0	≦ 4.0 ～ ≦ 8.0	-	-	-	-	2.0 to 3.0 ～ 2.0 to 3.5	1.0 to 2.0 ～ 2.3 to 3.0	1.0~1.5 ～ 1.0~2.0	-	-	1.6 to 2.6 ～ 2.6~3.0	3.0–4.0 ～ 4.0–5.0	2.0~3.0 ～ 3.0–4.0	1.4–2.3 ～ 1.6 to 2.6	≦4.5 ～ ≦8.0	-	-	-	1.6 to 2.6 ～ 2.3～3.0	3.0–4.0 ～ 4.0–5.0	1.0~2.0 ～ 1.6 to 2.6	-	4.0–5.0	-	-	-	2.0 to 3.5	-
Rotation Speed(min⁻¹)	280	280, 340, 400	1200	-	High: 1,000, Low: 690	High: 1,000, Low: 690	-	500 ～ 1900	-	-	High: 1,000, Low: 690	-	HI:1000/LO:700 ～ HI: 2000 (LO has no setting)	-	-	-	1,900 ～ 700	1,200 ～ 370	-	-	-	0～2500	1000 ～ 2000	Hi：670、Lo：470 ～ Hi：1000、Lo：700	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Power Consumption(W)	-	-	-	55	-	-	48	46	-	-	-	-	25 ～ 55	-	-	55	46	100 ～ 200	-	-	-	250	35	-	-	-	-	38	48	30 ～ 45	25	120 ～ 200	-	-	-	55	90 ～ 120	25	-	120	-	-	-	35	-
Overall Length(mm)	140	147	140	238	235	235	230	264	-	-	206	-	222 ～ 250	-	-	238	264	298	430-1000	-	-	-	-	-	165	-	-	242	269	230 ～ 264	205	274×160	-	-	-	270	294	182	-	278	-	-	-	264	-

Loading...Tải…