(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
39 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Vessel USB Rechargeable Screwdriver
VESSEL
[Features]· Electric power for quick tightening and Manual for final tightening. · With High Brightness LED light. · Built in USB Recharge Li-ion Battery (3.6V-800mAh). · 6.35mm HEX shank. · [Use] · For electrical / equipment work, panel assembly, equipment / equipment maintenance, automobile / motorcycle maintenance, DIY, etc.
From: 1,065,667 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Vessel Electric Driver 220USBP1
VESSEL
[Features]· The rotation speed and torque can be switched in 3 steps according to the application. · Reinforced gear and housing increase strength by 20%. · Uses USB Type-C, which allows you to connect to the charging port without hesitation because there is no directionality of the terminal. · [Use] · For electronic terminal block work, distribution board terminal work, tightening light ceiling screws and long screws, etc.
From: 1,394,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Vessel Rechargeable Ballgrip S / D Hi-Seed 220USB-S1
VESSEL
[Features]·No-load rotation speed 1200 rpm. · Easy charging with USB. · High-brightness LED light (lights up for 5 seconds after use). · [Use] · For switchboard assembly and mounting of fittings and exterior parts.
From: 1,225,334 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Driver Arm
KILEWS
[Features]· Absorbs shocks of the high torque driver.· KP-AUXA is for vertical tightening.
From: 16,652,736 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Suspension Rack
KILEWS
[Features]· Insert unused screwdrivers to store.· Prevents falling from the workbench.
From: 191,493 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Dedicated Controller HFB-800 Series Compatible
KILEWS
[Features]· A dedicated controller for HFB-800 series.
From: 8,099,487 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver, Standard Type Electric Driver HFD-5000 Series
KILEWS
[Features]· Standard type that realizes both durability and cost.· Low voltage allows for secure use.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.
From: 6,965,116 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver (Lever Start Type Push Start Type)
VESSEL
Includes an impact-absorbing gel pad: an electric screwdriver for commercial factories that can be gripped firmly.[Features]· A slotless brushless motor adopted.· There is little recoil when the motor is started.· Improves usability, tightening accuracy, and maintainability.· Ergonomic design for easy holding and reduced fatigue.· Includes a tamper-proof sleeve that prevents accidental operation after adjustments.· Uses non-contact type magnet switch to reduce wear and damage of parts.[Applications]· For production plants.
From: 13,291,280 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory, Slow Start Control BOX
KILEWS
[Features]· Ideal for specific tightening conditions.· The rotation speed and time at start-up can both be set.· Equipped with signal output terminal.
From: 3,524,706 VND |
---|
Days to Ship: Số ngày giao hàng: 13 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brushless Electric Screwdriver (Dual Start Type Push/Lever)
HIOS
[Features]· Counts the number of rotation pulses of the motor so that screw tightening errors are detected in real time with higher accuracy.· Won't miss the mixing in of different types of screws or floating screws.· Direct teaching has made setting simpler.· The number of screws tightened is displayed.· Capable of systemized management on screw-tightening errors thanks to the installed serial port.
From: 15,942,250 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Flexible Driver Arm
KILEWS
[Features]· It eliminates the impact of the screwdriver and enables work safely.· Can be operated at any angle.· There are 4 different types according to the mounting method.
From: 12,783,095 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: VE-2000EPA・Output torque range: 0.06 - 0.34Nm・Fit screw: Small screw/M1.0-M2.3, Tapping/1.0 - 2.0mm・Starting method: Lever type・Torque adjustment ring: 24 steps x 5 scales・No load rotational speed: HI/1000min^-1/LO: 700min^-1・Power source: DC15V 15W・Cable length: 2m・Length: 200mm・Weight: 190g・Accessories: Power cord/2.0m, Controller VCT-20, AC cable (1.8m), Ijiri stopper sleep (installed), Set screw (M3 x 3) x 2, Hex wrench (H1.5), 3P2P conversion adapter, 3P6P conversion code, Attached bit (D73 + 0 x 1.4 x 40/+ 0 x 1.7 x 40) x 1
From: 21,759,036 VND |
---|
Days to Ship: Số ngày giao hàng: 14 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Kanon Electric Screwdriver 9K-SWP Series
NAKAMURASEISAKU
From: 21,527,684 VND |
---|
Days to Ship: Số ngày giao hàng: 30 Day(s) |
You can add up to 6 items per a category to the compare list.
[Kanon] 9K Series Electric Screwdriver
NAKAMURASEISAKU
High power type with high output motor.[Features]·Torque range 50-450cN⋅m.·Machine screw 2.3 to 6.0 mm.·High power type with high output motor.·Ideal for working with tapping screws.·Just push it in to start, so you can speed up your work.·For high torque applications, a pistol grip (sold separately) can be used to support the driver.·Push start type.·Stops when torque is increased.[Applications]·Tightening electronic devices and substrates.·Panel tightening for pachinko machines.
From: 17,507,589 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cushion Latch Type Electric Screwdriver HS-200 Series
KILEWS
[Features]· Clutch starts idling when reaching set torque value.· Motor stops when the lever is released.· Electric powered so it does not suffer the same torque variation that occur due to changes in air pressure, and the torque accuracy is far better than that of general air screwdrivers.
From: 4,384,453 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brushless Screwdriver BLG Series (DC Type) Push/Lever Dual Start Type
HIOS
[Features]・ It has the same performance, quality, and durability as the conventional brushless (BL series), and has improved maintainability.・ A smooth, cost effective transition can be made from a screwdriver with a brush (CL, α type) to brushless (BLG type).
From: 11,942,175 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
100 VAC Electric Impact Screwdriver【1-2 Pieces Per Package】
TRAD
[Features]A carbon brush that can be used for the impact screwdriver TID-92N.
From: 241,571 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver, Controller Integrated Screw Counter For BN-200/500 Series
KILEWS
[Features]· Manage the number of tightened screws.· Various settings related to screw tightening can be performed to prevent human error.
From: 14,758,236 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Low Voltage DC Type Brushless Electric Screwdriver BN-500 Series
KILEWS
[Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.
From: 9,427,703 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Low Voltage DC Type Brushless Electric Screwdriver BN-800 Series
KILEWS
[Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.
From: 13,139,708 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Carbon Brush【2 Pieces Per Package】
KILEWS
[Features]· Accessories for electric screwdrivers.
From: 181,556 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver, HSF Series For Manual Use
HIOS
[Features]· Exchange the rails to make 1 unit compatible with many types of screw diameter· Thin design suitable for cell production with a width of 55 mm· Sensor adjustment makes it compatible with thin-headed screws
From: 16,918,671 VND |
---|
Days to Ship: Số ngày giao hàng: 13 Day(s) or more |
You can add up to 6 items per a category to the compare list.
[Kanon] 9K-131 Series Electric Screwdriver
NAKAMURASEISAKU
[Features]· Medium torque type featuring a balance between compactness and high power.
From: 16,145,972 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Low Voltage DC Type Brushless Electric Screwdriver HFB-500 Series
KILEWS
[Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.
From: 8,902,500 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Dedicated Controller HFB-200, HFB-500 Series Compatible
KILEWS
[Features]· A dedicated controller for HFB-200 and HFB-500 series.· For 1 unit, HI/LO 2-step switchable.
From: 3,175,071 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AC Transformer-less Type Electric Screwdriver HFA-6000 series
KILEWS
[Features]· Very easy to move and install with no controller required.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.
From: 7,673,990 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AC Transformer-less Type Electric Screwdriver HFA-9000 Series
KILEWS
Electric screwdriver with superior torque precision and easy setting and moving. [Features]· Movement and setting can be easily done without the need for a controller. Combined with a soft grip for reducing fatigue during long hours of work.· A high-powered type with a high-output motor. Push-start and lever-start types available.· Torque fixing ring included as standard. [Applications]· Can be used for work with tapping screws.· Ideal for tightening small screws from M3 to M5.
From: 8,443,420 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Dedicated Controller HFD-2000, 5000, 7000 Series
KILEWS
[Features]· A dedicated controller for HFD-2000, 5000, and 7000 series.· HI/LO 2-gear switch.
From: 2,284,983 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Angle Attachment
KILEWS
[Features]· Bit mounting socket: Opposite side 6.35 mm hexagon.· Lever start type only.· Use at 70% or less of the maximum output torque.
From: 3,481,206 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: VE-1500EPA・Output torque range: 0.01 - 0.15Nm・Fit screw: Small screw/M1.0-M1.7, Tapping/1.0 - 1.5mm・Starting method: Lever type・Torque adjustment ring: 24 steps x 5 scales・No load rotational speed: HI/1000min^-1/LO: 700min^-1・Power source: DC15V 15W・Cable length: 2m・Length: 200mm・Weight: 190g・Accessories: Power cord/2.0m, Controller VCT-20, AC cable (1.8m), Ijiri stopper sleep (installed), Set screw (M3 x 3) x 2, Hex wrench (H1.5), 3P2P conversion adapter, 3P6P conversion code, Attached bit (D73 + 0 x 1.4 x 40/+ 0 x 1.7 x 40) x 1
From: 21,759,036 VND |
---|
Days to Ship: Số ngày giao hàng: 14 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver, Carbon Brush
HIOS
This is a peripheral component designed to be used for brush electric screwdrivers, offering good performance and durability.The range of use is up to the position of the groove on the brush surface. The carbon brush should be replaced when abrasion reaches this specified position. Upon replacement, it is necessary to replace the two places with new carbon brushes at the same time.
From: 219,900 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Kanon Electric Screwdriver 9K-131-SWP Series
NAKAMURASEISAKU
From: 20,101,306 VND |
---|
Days to Ship: Số ngày giao hàng: 30 Day(s) |
You can add up to 6 items per a category to the compare list.
Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type
HIOS
[Features]· Performance, quality and durability that are in line with a conventional brushless (BL type), with improved maintainability.· A smooth, cost effective transition can be made from a screwdriver with a brush (CL, α type) to brushless (BLG type).
From: 9,519,807 VND |
---|
Days to Ship: Số ngày giao hàng: 16 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 2,057,876 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
[Kanon] KD Series Electric Screwdriver
NAKAMURASEISAKU
[Features]· Small size and easy-grip specification due to the 29.5 mm grip diameter. (2KD series)· It does not generate heat even if continuously used, thanks to the adoption of a high-performance motor and air conditioning inside the uniquely developed driver.
From: 17,312,894 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Ultra-high Torque Electric Screwdriver TBN Series
KILEWS
[Features]· Improves workability with one shot tightening. The powerful brushless motor and clutch type torque control improve work efficiency.· Unique clutch structure makes the torque accuracy vastly more stable than that of an air driver.
From: 21,446,601 VND |
---|
Days to Ship: Số ngày giao hàng: 22 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Dedicated Controller RBN/TBN Series
KILEWS
[Features]· Dedicated controller for the RBN/TBN series.
From: 11,616,798 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Electric Screwdriver Accessory: Screw Plate
KILEWS
[Features]· Accessories for electric screwdrivers.
From: 561,895 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Charging Set Driver Drill Kit BD-7210kT
AS ONE
【Product Specifications】・Model number: BD-7210KT・Maximum torque (N・m): Low speed/12.0, High speed/6.0・Drilling capacity: Iron steel/7mm Wood/12mm・Screw tighten capacity: Wood screw/4.1 x 32mm・Rotation speed: Low speed/0 - 330rpm, High speed/0 - 1170rpm・Power supply: 1500mAh capacity Ni-Cd rechargeable battery (7.2V)・Charging hour: 60 minutes・Size: 151 x 57 x 222mm・Weight: 1.0kg・Accessories: Drill bit (iron steel drill) 2, 3, 4, 5, 6mm x 1 piece each, Driver bit (No. 2 x 65mm), Battery pack, Charger・Drill set content: φ1.5, φ2, φ2.5, φ3, φ3.2, φ3.5, φ4, φ4.5, φ4.8, φ5, φ5.5, φ6, φ6.5mm
From: 3,845,528 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Output torque(N▪m) |
Product Type |
Power Supply(V) |
Compatible Screw: Small Screw(mm) |
Cord Length(m) |
Start Method |
Compatible Screw: Tapping Screw(mm) |
Rotation Speed(min⁻¹) |
Power Consumption(W) |
Overall Length(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | VESSEL | VESSEL | VESSEL | KILEWS | KILEWS | KILEWS | KILEWS | VESSEL | KILEWS | HIOS | KILEWS | AS ONE | NAKAMURASEISAKU | NAKAMURASEISAKU | KILEWS | HIOS | TRAD | KILEWS | KILEWS | KILEWS | KILEWS | HIOS | NAKAMURASEISAKU | KILEWS | KILEWS | KILEWS | KILEWS | KILEWS | KILEWS | AS ONE | HIOS | NAKAMURASEISAKU | HIOS | HIOS | NAKAMURASEISAKU | KILEWS | KILEWS | KILEWS | AS ONE |
Product SeriesDòng sản phẩm | Electric Screwdriver Dedicated Controller HFB-800 Series Compatible | Electric Screwdriver, Standard Type Electric Driver HFD-5000 Series | Brushless Screwdriver BLG Series (DC Type) Push/Lever Dual Start Type | Electric Screwdriver, Controller Integrated Screw Counter For BN-200/500 Series | Low Voltage DC Type Brushless Electric Screwdriver BN-500 Series | Low Voltage DC Type Brushless Electric Screwdriver BN-800 Series | Electric Screwdriver Accessory: Carbon Brush【2 Pieces Per Package】 | Low Voltage DC Type Brushless Electric Screwdriver HFB-500 Series | Electric Screwdriver Dedicated Controller HFB-200, HFB-500 Series Compatible | AC Transformer-less Type Electric Screwdriver HFA-6000 series | AC Transformer-less Type Electric Screwdriver HFA-9000 Series | Electric Screwdriver Dedicated Controller HFD-2000, 5000, 7000 Series | Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type | ||||||||||||||||||||||||||
From | 1,065,667 VND | 1,394,000 VND | 1,225,334 VND | 16,652,736 VND | 191,493 VND | 8,099,487 VND | 6,965,116 VND | 13,291,280 VND | 3,524,706 VND | 15,942,250 VND | 12,783,095 VND | 21,759,036 VND | 21,527,684 VND | 17,507,589 VND | 4,384,453 VND | 11,942,175 VND | 241,571 VND | 14,758,236 VND | 9,427,703 VND | 13,139,708 VND | 181,556 VND | 16,918,671 VND | 16,145,972 VND | 8,902,500 VND | 3,175,071 VND | 7,673,990 VND | 8,443,420 VND | 2,284,983 VND | 3,481,206 VND | 21,759,036 VND | 219,900 VND | 20,101,306 VND | 9,519,807 VND | 2,057,876 VND | 17,312,894 VND | 21,446,601 VND | 11,616,798 VND | 561,895 VND | 3,845,528 VND |
Days to ShipSố ngày giao hàng | Same day | Same day | Same day | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 13 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 14 Day(s) or more | 30 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 15 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 14 Day(s) or more | Same day | 30 Day(s) | 16 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 22 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
Output torque(N▪m) | 2 | 1.2, 1.6, 2.0 | 0.4 | - | - | - | 0.10~1.18 | 0.15~1.0 ~ 0.4~1.8 | - | 0.2 to 1.2 | - | 0.06 to 0.34Nm | 0.5 to 2.2 ~ 1.5 to 4.5 | 0.5 to 1.8 ~ 1.5 to 4.5 | 0.20~1.47 ~ 0.98~3.43 | 0.2 to 1.2 | 92 | - | 0.2~1.18 | 1.96~4.90 | - | - | 0.4 to 1.5 ~ 0.5 to 2 | 0.2~1.18 ~ 0.3~1.86 | - | 0.20~1.18 ~ 0.30~1.86 | 0.98~2.94 ~ 1.47~4.41 | - | - | 0.01 to 0.15Nm | - | 0.4 to 1.5 | 0.1 to 0.55 | - | 0.02 to 0.35 ~ 0.3 to 1.6 | 6 to 18 | - | - | - |
Product Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Main Body / Related Part | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Power Supply(V) | 5 | - | - | - | - | AC 100–240 | - | DC32 | - | - | - | DC15V 15W | AC 100 | AC100V 50/60Hz | - | - | 100 | 100-240 50/60Hz | - | - | - | - | AC100V 50/60Hz | - | AC 100–240 | - | - | AC 100–240 | - | DC15V 15W | - | AC 100 | - | - | AC100V 50/60Hz | - | AC 100–240 | - | - |
Compatible Screw: Small Screw(mm) | - | - | - | - | - | - | 1.6~3.0 | M1.6-3.0 ~ M2.3-3.0 | - | 2.0 to 3.0 | - | - | 2.3 to 4.0 | 2.3 to 4.0 ~ 4.0 to 6.0 | 2.0–4.0 ~ 3.0~5.0 | 2.0 to 3.0 | - | - | 1.6~3.0 | 4.0–6.0 | - | - | 2.0 to 3.5 ~ 2.6 to 4.0 | 1.6~3.0 ~ 2.3~4.0 | - | 1.6~3.0 ~ 2.6~4.0 | 3.0~5.0 ~ 4.0–6.0 | - | - | - | - | 2.0 to 3.5 | 1.4 to 2.6 | - | 1.0 to 2.3 ~ 2.3 to 3.5 | ≦10.0 | - | M1.7~M2.0 ~ M3.0~M4.0 | - |
Cord Length(m) | - | - | - | - | - | - | - | 2 | - | 2 | - | - | - | 3 | - | 1.5 | 5 | - | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | 1.5 | - | 3 | - | - | - | - |
Start Method | Lever Start Type | Lever Start Type | Lever Start Type | - | - | - | Push Start Type | Push Start Type / Lever Start Type | - | For Both Push/Lever | - | Lever Start Type | - | Push Start Type | Lever Start Type | For Both Push/Lever | Push Start Type | - | Push Start Type | Push Start Type | - | - | Push Start Type / Lever Start Type | Push Start Type | - | Push Start Type / Lever Start Type | Push Start Type / Lever Start Type | - | - | Lever Start Type | - | - | Lever Start Type | - | Lever Start Type | Lever Start Type | - | - | - |
Compatible Screw: Tapping Screw(mm) | - | - | - | - | - | - | 1.6 to 2.6 | 1.6-2.6 ~ 2.3-3.0 | - | 2.0 to 3.0 | - | Machine screw/M1.0-M2.3, tapping/1.0-2.0 mm | 2.0 to 3.5 ~ 3.0 to 5.0 | 2.0 to 3.5 ~ 3.0 to 5.0 | 2.0~3.0 ~ 3.0–4.0 | 2.0 to 3.0 | - | - | 1.6 to 2.6 | 4.0–5.0 | - | - | 2.0 to 3.0 ~ 2.0 to 3.5 | 1.6 to 2.6 ~ 2.3~3.0 | - | 1.6 to 2.6 ~ 2.6~3.0 | 3.0–4.0 ~ 4.0–5.0 | - | - | Machine screw/M1.0-M1.7, tapping/1.0-1.5 mm | - | 2.0 to 3.5 | 1.4 to 2.3 | - | 1.0 to 2.0 ~ 2.3 to 3.0 | ≦8.0 | - | - | - |
Rotation Speed(min⁻¹) | 280 | 280, 340, 400 | 1200 | - | - | - | - | HI:1000/LO:700 ~ HI: 2000 (LO has no setting) | - | High: 1,000, Low: 690 | - | - | 1,900 ~ 700 | 500 ~ 1900 | - | High: 1,000, Low: 690 | 0~2500 | - | - | - | - | - | 1000 ~ 2000 | - | - | - | - | - | - | - | - | - | High: 1,000, Low: 690 | - | Hi:670、Lo:470 ~ Hi:1000、Lo:700 | - | - | - | - |
Power Consumption(W) | - | - | - | - | - | - | 48 | 25 ~ 55 | - | - | - | - | 46 | 46 | 30 ~ 45 | - | 250 | - | 55 | 120 | - | - | 35 | 55 | - | 38 | 48 | - | - | - | - | 35 | - | - | - | 200 | - | - | - |
Overall Length(mm) | 140 | 147 | 140 | - | - | - | 230 | 222 ~ 250 | - | 235 | 430-1000 | 200mm | 264 | 264 | 230 ~ 264 | 235 | - | - | 238 | 278 | - | - | - | 238 | - | 242 | 269 | - | - | 200mm | - | 264 | 206 | - | - | 274×160 | - | - | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy