(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
36 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.5 ~ 10.009 | 5 ~ 40 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13.05 | - | Copper[○] | End Mill Shank / straight shank | NA | Straight | NA | - | - |
From: 963,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSR Carbide Short Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]· Solid type・ Ten times longer lifespan than HSS reamer.・ It supports a wide range of workpieces from cast iron to steel.· It is capable of high precision drilling・ It reduces machining time・ General-purpose carbide reamer・ Short type with less runout
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
1 ~ 20 | 12 ~ 45 | Copper[○] | straight shank | NA | Straight | NA | - | - |
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
1 ~ 30 | 15 ~ 75 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 1,352,643 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.2 ~ 12.1 | 3 ~ 45 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.97 ~ 12.05 | 12 ~ 45 | Copper[○] | straight shank | NA | Straight | NA | - | - |
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 20.05 | 4 ~ 80 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 26 ~ 31 | Copper[○] | straight shank | NA | Straight | NA | - | - |
From: 725,786 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.3 ~ 15.995 | 0.5 ~ 48 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· For hole finish machining of cast iron and general steel· MCO material (cobalt high-speed steel) is used
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
1 ~ 2 | 30 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
From: 859,651 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 12 ~ 45 | Copper[◎] | End Mill Shank | Available | Straight | NA | - | - |
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCR Carbide Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | Copper[○] | straight shank | NA | Straight | NA | - | - |
From: 3,307,501 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.3 ~ 5.995 | 0.5 ~ 34 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.5 ~ 12.05 | 6 ~ 45 | Copper[◎] | End Mill Shank | Available | Straight | NA | - | - |
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.[Features]· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.· φ0.2-3 (0.2-3 mm diameter) types are available.[Applications]· Ideal for finish machining of ultra-small diameter holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.2 ~ 3 | 3 ~ 25 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 940,661 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCRT Carbide Chucking Reamer (Morse Taper Shank)
OKAZAKI SEIKO
Carbide tipped type, morse taper shank specification. Deep hole drilling is possible with a neck diameter smaller than the blade diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | Copper[○] | Morse Taper Shank | NA | Straight | NA | - | - |
From: 3,632,606 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CCRM Carbide Chucking Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 26 ~ 31 | Copper[○] | straight shank | NA | Straight | NA | - | - |
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent abrasion resistance for finishing deep holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 10.05 | 20 ~ 150 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 1,319,004 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Long Shank Chucking Reamer CSCRL
EIKOSHA
[Features]· Short blade length and super long shank.· Ideal for deep hole finishing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 35 ~ 60 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 3,323,618 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 27 ~ 40 | Copper[○] | End Mill Shank | NA | Straight | Available | - | - |
From: 1,581,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.3 ~ 15.99 | 0.5 ~ 48 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length·Long type allows reaming of deep areas
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.3 ~ 5.99 | 0.5 ~ 34 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
1 ~ 10 | 12 ~ 40 | Copper[○] | End Mill Shank | Available ~ NA | Straight | NA | - | - |
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.5 ~ 5.9 | 3 ~ 10 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
1.8 ~ 5 | - | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. Wear-resistant carbide K type adopted
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 15 ~ 80 | Copper[◎] | straight shank | NA | Straight | NA | - | - |
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).[Features]· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.· Provides excellent finish for high-hardness workpieces as well.[Applications]· For finish machining of 1/50 taper pin holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
- | 28 ~ 194 | Copper[◎] | straight shank | NA | Straight | NA | 1 ~ 13 | 1.46 ~ 16.74 |
From: 1,031,597 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
2.91 ~ 12.1 | 20 ~ 25 | Copper[○] | End Mill Shank | NA | Straight | NA | - | - |
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NEW STRONG
[Features]· The blade groove division angles are unequally divided.· If the division angles of the blade grooves are the same, the same force will be applied to each blade, which causes the same vibration and makes them susceptible to resonance, causing chattering.· By unequally dividing the blade grooves, the force applied to each blade is also changed to suppress resonance, and by decreasing chattering, the processing accuracy is improved and roundness is stabilized.· A carbide tip is brazed onto SCM (adhesive material) to relax the spindle flex.· Grip quality of holder improved: The use of an endmill shank (quenched) makes collet use possible, with better grip accuracy compared to drill chucks. Special collet manufacturing is not required.· Improved blade diameter precision: Uses k5 for the blade diameter tolerance to make it easier to enter at H7 tolerance.· Neck is designed to be longer for deep hole machining
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
6.00 (for H7) ~ 13.00 (for H7) | 20 ~ 30 | Copper[○] | End Mill Shank | - | Straight | - | - | - |
From: 2,644,107 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NEW STRONG
[Features]· Material: Z-10 solid.· Ideal for modification of holes after drilling for semi-finishing or machining prior to reaming.· Produced at a maximum of φ28.8, with repolishing possible (tipped at φ13.8 or higher)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
5.8 ~ 12.8 | 20 ~ 30 | Copper[○] | End Mill Shank | - | Spiral | - | - | - |
From: 5,563,426 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]· The cutting speed is approximately 2.5 times that of conventional coating reamers.· The pinpoint lubrication improves the weld resistance and machined surface roughness
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
2.97 ~ 20.03 | 19 ~ 25 | Copper[○] | End Mill Shank | Available | Straight | NA | - | - |
From: 4,864,710 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-DLC
EIKOSHA
[Features]· Exhibits excellent weld resistance with aluminum, non-ferrous metal, etc.· Thin film that does not impair machinability.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter |
---|---|---|---|---|---|---|---|---|
12 | 19 ~ 25 | Copper[○] | End Mill Shank | Available | Straight | NA | - | - |
From: 5,687,265 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | FPTOOLS | OSG | OKAZAKI SEIKO | EIKOSHA | FPTOOLS | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | MISUMI | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | MISUMI | MISUMI | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | FPTOOLS | NEW STRONG | NEW STRONG | EIKOSHA | EIKOSHA |
Product SeriesDòng sản phẩm | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | ||||||||||||||||||||||||||||
From | 1,247,050 VND | 963,333 VND | 649,290 VND | 1,352,643 VND | 519,142 VND | 649,290 VND | 717,840 VND | 725,786 VND | 859,651 VND | 1,351,933 VND | 3,307,501 VND | 2,180,046 VND | 940,661 VND | 3,632,606 VND | 764,033 VND | 1,319,004 VND | 3,323,618 VND | 1,581,436 VND | 829,294 VND | 1,214,660 VND | 1,031,597 VND | 722,944 VND | 2,644,107 VND | 5,563,426 VND | 4,864,710 VND | 5,687,265 VND | ||||||||||
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
Tool Diameter(mm) | 0.5 ~ 10.009 | 0.3 ~ 13.05 | 1 ~ 20 | 1 ~ 30 | 0.2 ~ 12.1 | 0.97 ~ 12.05 | 0.4 ~ 20.05 | 3 ~ 12 | 0.3 ~ 15.995 | 1 ~ 2 | 0.8 ~ 12.05 | 12.5 ~ 30 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.5 ~ 12.05 | 0.2 ~ 3 | 12.5 ~ 30 | 2.95 ~ 12.05 | 0.4 ~ 10.05 | 3 ~ 20 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 0.5 ~ 5.9 | 1.8 ~ 5 | 0.8 ~ 12.05 | - | 2.91 ~ 12.1 | 6.00 (for H7) ~ 13.00 (for H7) | 5.8 ~ 12.8 | 2.97 ~ 20.03 | 12 |
Groove Length(mm) | 5 ~ 40 | - | 12 ~ 45 | 15 ~ 75 | 3 ~ 45 | 12 ~ 45 | 4 ~ 80 | 26 ~ 31 | 0.5 ~ 48 | 30 | 12 ~ 45 | 36 ~ 46 | 0.5 ~ 34 | 0.5 ~ 48 | 6 ~ 45 | 3 ~ 25 | 36 ~ 46 | 26 ~ 31 | 20 ~ 150 | 35 ~ 60 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 34 | 27 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 3 ~ 10 | - | 15 ~ 80 | 28 ~ 194 | 20 ~ 25 | 20 ~ 30 | 20 ~ 30 | 19 ~ 25 | 19 ~ 25 |
work material | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] |
Shank Type | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | Morse Taper Shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available ~ NA | NA | NA | NA | NA | NA | - | - | Available | Available |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy