(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
70 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
From: 963,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]· OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・ It can process high hardness materials up to HRC62
From: 1,471,615 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
From: 958,417 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 258,667 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent abrasion resistance for finishing deep holes.
From: 1,319,004 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).[Features]· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.· Provides excellent finish for high-hardness workpieces as well.[Applications]· For finish machining of 1/50 taper pin holes.
From: 1,031,597 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
From: 6,461,825 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) |
You can add up to 6 items per a category to the compare list.
Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
[Features]· Solid type・ The rough cutting edge at the tip stabilizes the finished dimensions with a uniform machining allowance.· Helix angle 35°・ Rough flute, finishing edge 2 steps finish
From: 1,490,738 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type
From: 1,089,138 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 628,000 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy·Drilling is possible under cutting conditions of 60 m/min or more·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
From: 2,860,723 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 725,786 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Full Cut Solid Carbide Reamers MRS
MAKOTOLOY
[Features]· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.
From: 785,585 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
From: 1,581,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCR Carbide Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 3,307,501 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CCRM Carbide Chucking Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSR Carbide Short Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]· Solid type・ Ten times longer lifespan than HSS reamer.・ It supports a wide range of workpieces from cast iron to steel.· It is capable of high precision drilling・ It reduces machining time・ General-purpose carbide reamer・ Short type with less runout
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Reamer for Blind Holes HR500S 1685
GUHRING
[Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Lubricates internally using the center-through hole, helping achieve reliable extraction of cutting chips.
From: 5,554,385 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]· The cutting speed is approximately 2.5 times that of conventional coating reamers.· The pinpoint lubrication improves the weld resistance and machined surface roughness
From: 4,864,710 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length·Long type allows reaming of deep areas
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.[Features]· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.· φ0.2-3 (0.2-3 mm diameter) types are available.[Applications]· Ideal for finish machining of ultra-small diameter holes.
From: 940,661 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,352,643 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCRT Carbide Chucking Reamer (Morse Taper Shank)
OKAZAKI SEIKO
Carbide tipped type, morse taper shank specification. Deep hole drilling is possible with a neck diameter smaller than the blade diameter
From: 3,632,606 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | FPTOOLS | EIKOSHA | OKAZAKI SEIKO | FPTOOLS | EIKOSHA | FPTOOLS | OSG | MISUMI | OKAZAKI SEIKO | MISUMI | EIKOSHA | EIKOSHA | MISUMI | MISUMI | EIKOSHA | FPTOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OSG | MISUMI | OKAZAKI SEIKO | MAKOTOLOY | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | FPTOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | GUHRING | DYC | EIKOSHA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | OKAZAKI SEIKO |
Product SeriesDòng sản phẩm | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | |||||||||||||||||||||||||||||||||||||
From | 963,333 VND | 519,142 VND | 717,840 VND | 1,471,615 VND | 1,247,050 VND | 1,351,933 VND | 958,417 VND | 258,667 VND | 649,290 VND | 1,214,660 VND | 1,319,004 VND | 829,294 VND | 1,031,597 VND | 6,461,825 VND | 1,490,738 VND | 974,395 VND | 1,089,138 VND | 628,000 VND | 2,860,723 VND | 725,786 VND | 785,585 VND | 1,581,436 VND | 2,180,046 VND | 722,944 VND | 3,307,501 VND | 764,033 VND | 649,290 VND | 5,554,385 VND | 4,864,710 VND | 940,661 VND | 1,352,643 VND | 3,632,606 VND | |||||||||||||
Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 15 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 15 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more |
Tool Diameter(mm) | 0.3 ~ 13.05 | 0.2 ~ 12.1 | 0.4 ~ 20.05 | 2.95 ~ 12 | 0.5 ~ 10.009 | 0.8 ~ 12.05 | 0.9 ~ 14 | 2 ~ 20 | 0.3 ~ 15.995 | 1.995 ~ 5.03 | 0.3 ~ 15.99 | 0.8 ~ 12.05 | 0.4 ~ 10.05 | 0.4 ~ 5.995 | 1 ~ 10 | - | 30.25~34.25 | 2.95 ~ 12.05 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 3.15 ~ 28 | 2 ~ 10 | 3 ~ 12 | 0.5 ~ 10 | 0.4 ~ 15.995 | 3 ~ 10.01 | 0.5 ~ 5.9 | - | 0.5 ~ 12.05 | 2.91 ~ 12.1 | 12.5 ~ 30 | 2.95 ~ 12.05 | 1 ~ 20 | 3 ~ 20 | 1.5 ~ 20 | 2.97 ~ 20.03 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.3 ~ 5.99 | 1.8 ~ 5 | - | 0.2 ~ 3 | 1 ~ 30 | 12.5 ~ 30 |
Groove Length(mm) | - | 3 ~ 45 | 4 ~ 80 | - | 5 ~ 40 | 12 ~ 45 | 20 ~ 70 | - | 0.5 ~ 48 | 18 ~ 30 | 0.5 ~ 48 | 15 ~ 80 | 20 ~ 150 | 0.5 ~ 34 | 12 ~ 40 | 28 ~ 194 | 98 | 20 ~ 31 | 26 ~ 31 | 27 ~ 30 | - | 12 ~ 52 | 26 ~ 31 | 15 ~ 40 | 0.5 ~ 48 | 27 ~ 40 | 3 ~ 10 | - | 6 ~ 45 | 20 ~ 25 | 36 ~ 46 | 26 ~ 31 | 12 ~ 45 | 12 ~ 25 | 10 ~ 60 | 19 ~ 25 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 34 | - | - | 3 ~ 25 | 15 ~ 75 | 36 ~ 46 |
work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Resin[○] / Alloy Steel[○] | general steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | - | - | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] |
Shank Type | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | - | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | - | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | Morse Taper Shank |
Coating Y/N | NA | NA | NA | Available | NA | Available | NA | - | NA | NA | NA | NA | NA | NA | Available ~ NA | NA | - | NA | Available | Available | - | Available | NA | - | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Groove Shape | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | Helical | Straight | Straight | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | - | Available | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | Available | Available | NA | - | NA | NA | NA | NA | NA | - | NA | NA | Available | Available | Available | NA | NA | - | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | 2 mm ~ 16 mm | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | 1.9 mm ~ 24.7 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | - | - | - | - | 2.86 ~ 30.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy