(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
269 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
YG 1
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | - | 1 | High-speed steel | Hand Tap | For blind hole | - | - | NA | 62 |
From: 419,022 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. Spiral point tap with point groove used for through holes.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | 0.75 ~ 1 | Powder high-speed steel | Point tap | For through hole | 5P | Other | Available | 100 ~ 200 |
From: 799,999 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Dies (for left-hand threads) D LH for Metric Threads
YAMAWA MFG
Solid die for left-handed threads with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The rear is sunk so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Enables hand turned use or use with machinery.· Solves problems particular to adjustable type dies, realizing high precision male screw machining.[Applications]· Ideal for male thread machining with iron or light metals.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | - | 0.5 ~ 1 | High-speed steel | Die | - | - | - | NA | - |
From: 1,590,660 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.[Features]· Excellent abrasion resistance and adhesion resistance.· Improved chip discharge performance and service life.[Applications]· Ideal for mass tapping of aluminum and cast iron, etc.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | 1 | Carbide | Hand Tap | For through hole / For blind hole | 1.5P ~ 3P | TiCN | Available | 62 |
From: 3,475,444 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | High Hardness Steel (50-60 HRC)[◎] | 1 | Carbide | Hand Tap | For through hole / For blind hole | 3P | TiCN | Available | 62 |
From: 3,085,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
CPM Straight Flutes Tap_CPM-HT
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 1 | Powder high-speed steel | Hand Tap | For through hole / For blind hole | 2P ~ 5P | Non-Coated | NA | 62 |
From: 372,081 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank・General Application_EX-LT-POT
OSG
It is used when the tool runout of the thread section is insufficient with the standard spiral point tap.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 0.75 ~ 1 | Vanadium High-Speed Steel | Point tap | For through hole | 5P | Non-Coated | NA | 100 ~ 200 |
From: 395,000 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | 0.75 ~ 1 | High-speed steel | Point tap | For through hole | 5P | - | NA | 62 |
From: 146,192 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | High Hardness Steel (50-60 HRC)[○] | 1 | Carbide | Point tap | For through hole / For blind hole | 5P | TiAlN | Available | 62 |
From: 2,407,060 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) |
You can add up to 6 items per a category to the compare list.
Threading Round Die Series Pipe General Threading Round Die RD-S
OSG
[Specifications]· Shape: Die· Coating: Non-Coated· Tool material: Alloy HSS (SKS)
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | - | 0.5 ~ 1 | Alloy HSS | Die | - | - | Non-Coated | NA | - |
From: 876,073 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 1 | Vanadium High-Speed Steel | Point tap | For through hole | 5P | TiN | Available | 62 |
From: 494,999 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 1 | Vanadium High-Speed Steel | Point tap | For through hole | 6P | TiN | Available | 62 |
From: 638,355 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Point Tap for Through Holes 1015
GUHRING
[Features]· JIS standard compliant tap for through holes.· Supports a wide range of work materials from general steel to stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | - | 1 | High-speed steel | Point tap | For through hole | - | TiN | Available | 62 |
From: 443,148 VND |
---|
Days to Ship: Số ngày giao hàng: 24 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | 1 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 62 |
From: 160,688 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | 1 | Carbide | Thread cutter | For through hole / For blind hole | - | TiAlN | Available | 57 ~ 60 |
From: 2,989,799 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】
MISUMI
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 1.5P ~ 2.5P | TiN | Available | 62 ~ 100 |
From: 366,374 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
General purpose tap.[Features]· Used for through-hole thread tapping.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | 1 | High-speed steel | Point tap | For through hole | 5P | - | NA | 62 |
From: 164,445 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 2.5P | Other | Available | 62 |
From: 571,666 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.75 ~ 1 | High-speed steel | Roll tap | - | 1P ~ 2P | TiCN | Available | 62 |
From: 996,626 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 1 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 100 ~ 200 |
From: 384,783 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SBK
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | - | - | 1 | - | - | - | - | - | - | 62 |
Days to Ship: Số ngày giao hàng: 43 Day(s) |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]・ Non-coated general purpose tap.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | 1 | High-speed steel | Point tap | For through hole | 5 | Non-Coated | NA | 62 |
From: 187,500 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Spiral Tap【10 Pieces Per Package】
MISUMI
[Features]·High-speed steel uncoated spiral flute tap·Can be used for blind hole machining·Effective for work materials with continuous cutting chip such as carbon steel and steel alloy
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 2.5P | - | NA | 62 |
From: 1,457,267 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
General-purpose tap used for threading blind holes.[Features]· The special groove shape excels in chip discharge properties, eliminating biting of chips and winding around taps.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | 1 | Alloy HSS | Spiral Tap | For blind hole | 2.5P | - | Available | 62 |
From: 170,000 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips and provides stable screw accuracy.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.[Applications]· Ideal for rolled threading of non-ferrous metals such as aluminum.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | 1 | High-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | - | NA | 62 |
From: 332,652 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 0.75 ~ 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 2.5P | TiN | Available | 62 |
From: 503,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap Short Chamfer type_EX-SC-SFT
OSG
The chamfer length is 1.5-tooth. It is ideal when the effective screw length cannot be secured with a blind hole and a spiral flute tap for general use with a 2.5-tooth chamfer length.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 1.5P | Non-Coated | NA | 62 |
From: 258,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.Tool Material: Vanadium high-speed steelWork material: general steel / cast iron / aluminum / copper
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.75 ~ 1 | Vanadium High-Speed Steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | Non-Coated | NA | 100 ~ 300 |
From: 344,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | 1 | Carbide | Hand Tap | For through hole / For blind hole | 1.5P ~ 3P | Non-Coated | NA | 62 |
From: 2,006,342 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 1 | Vanadium High-Speed Steel | Point tap | For through hole | 6P | Non-Coated | NA | 62 |
From: 392,671 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
Ideal for forging high carbon steel, tool steel, steel alloy, or through hole drilling with a hardness of 20 to 45 HRC for work materials
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 1 | Powder high-speed steel | Point tap | For through hole | 5P | Non-Coated | NA | 62 |
From: 301,667 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
CPM Pointed Tap with Long Shank_CPM-LT-POT
OSG
Ideal for forging high carbon steel, tool steel, steel alloy, or through hole drilling with a hardness of 20 to 45 HRC for work materials
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 1 | Powder high-speed steel | Point tap | For through hole | 5P | Non-Coated | NA | 100 |
From: 509,110 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT
OSG
Suitable for steel and non-ferrous alloys. High-speed cutting is possible, durability is greatly improved, and highly efficient tapping is possible.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 1 | Vanadium High-Speed Steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiN | Available | 100 ~ 150 |
From: 750,878 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | 1 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 62 |
From: 274,306 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Insert Coil Tap Spiral Type T2197
YG 1
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 2.5 | - | NA | 65 |
From: 407,332 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) |
You can add up to 6 items per a category to the compare list.
YG 1
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Cast Iron (FC)[◎] / Copper (Cu)[○] | 1 | Carbide | Hand Tap | For blind hole | 1.5 | - | NA | 62 |
From: 1,828,061 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) |
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Fluted Taps
YAMAWA MFG
Coated Spiral Fluted Taps[Features]Durability is improved by premium powder HSS and special coating.Chip ejection efficiency is improved and cutting resistance is reduced by the unique cutting edge shape, achieving a good internal thread and long tool life.Proper tool projection length is secured, preventing chips from interfering with the holder.This is most suitable for tapping with water soluble cutting fluid.[Specifications]Tapping conditions [M3×0.5]Tapping Length: 4.5mmTapping Speed: 20m/minMachine: Machining center, vertical typeTapping Fluid: Water soluble cutting fluid[Materials]This is compatible with a wide range of steel work materials including general structural steel, carbon steel, and alloy steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Stainless steel (SUS)[○] | - | Powder high-speed steel | Spiral Tap | For blind hole | - | Other | - | 80 |
From: 576,633 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Carbide uncoated type hand tap·Can be used for both blind holes and through holes·Suitable for mass production tapping of various cast iron
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | 1 | Carbide | Hand Tap | For through hole / For blind hole | 1.5P ~ 3P | - | NA | 62 |
From: 892,907 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 1 | Powder high-speed steel | Roll tap | For blind hole | 2P ~ 4P | TiCN | Available | 100 ~ 150 |
From: 841,285 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
Ideal for tapping mild steel thin plates with a tensile strength of 700 N/mm2 or less. Reduces burring and tearing.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | 1 | Vanadium High-Speed Steel | Roll tap | For through hole | 8P | TiCN | Available | 62 |
From: 682,318 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· A spiral tap for general steel.[Applications]· For blind hole machining.· Work materials: General steel, low/medium carbon steel, alloy steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | 1 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 2.5P | - | - | 62 |
From: 307,011 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
SKC
[Applications]Can be used for tapping screw holes in stainless steel.[Features]This spiral flute tap can discharge chips with a coiled groove.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.75 ~ 1 | - | Spiral Tap | - | - | - | - | - |
From: 373,480 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | - | 1 | High-speed steel | Roll tap | - | - | TiN | Available | 62 |
From: 574,625 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 1 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 62 ~ 70 |
From: 200,640 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 1 | High-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiN | Available | 62 |
From: 393,122 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | YG 1 | OSG | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | GUHRING | YAMAWA MFG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | TANOI MFG | YAMAWA MFG | SBK | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YG 1 | YG 1 | YAMAWA MFG | MISUMI | OSG | OSG | TRUSCO NAKAYAMA | SKC | GUHRING | YAMAWA MFG | YAMAWA MFG |
Product SeriesDòng sản phẩm | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Threading Round Die Series Pipe General Threading Round Die RD-S | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads | TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】 | Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | |||||||||||||||||||||||||||||||||||||||
From | 419,022 VND | 799,999 VND | 1,590,660 VND | 3,475,444 VND | 3,085,000 VND | 372,081 VND | 395,000 VND | 146,192 VND Special Price On Sale Till 31/03/2025 | 2,407,060 VND | 876,073 VND | 494,999 VND | 638,355 VND | 443,148 VND | 160,688 VND | 2,989,799 VND | 366,374 VND Special Price On Sale Till 31/03/2025 | 164,445 VND | 571,666 VND | 996,626 VND | 384,783 VND | 187,500 VND | 1,457,267 VND Special Price On Sale Till 31/03/2025 | 170,000 VND | 332,652 VND | 503,333 VND | 258,333 VND | 344,999 VND | 2,006,342 VND | 392,671 VND | 301,667 VND | 509,110 VND | 750,878 VND | 274,306 VND | 407,332 VND | 1,828,061 VND | 576,633 VND | 892,907 VND | 841,285 VND | 682,318 VND | 307,011 VND Special Price On Sale Till 31/03/2025 | 373,480 VND | 574,625 VND | 200,640 VND | 393,122 VND | |
Days to ShipSố ngày giao hàng | 10 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | Same day | 6 Day(s) or more | Quote | Same day or more | 5 Day(s) | 6 Day(s) or more | Same day | 6 Day(s) or more | 24 Day(s) or more | 10 Day(s) | 4 Day(s) or more | Same day or more | Quote | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 43 Day(s) | 10 Day(s) | Same day | Quote | 9 Day(s) or more | Same day or more | Quote | Quote | 6 Day(s) or more | 6 Day(s) or more | Same day | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) | 8 Day(s) | 9 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
Screw size (Nominal) | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
work material | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | High Hardness Steel (50-60 HRC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | High Hardness Steel (50-60 HRC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Copper (Cu)[○] | Stainless steel (SUS)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 1 | 0.75 ~ 1 | 0.5 ~ 1 | 1 | 1 | 1 | 0.75 ~ 1 | 0.75 ~ 1 | 1 | 0.5 ~ 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.75 ~ 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.75 ~ 1 | 1 | 0.75 ~ 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | 1 | 1 | 1 | 1 | 0.75 ~ 1 | 1 | 1 | 1 |
Tool Material Type | High-speed steel | Powder high-speed steel | High-speed steel | Carbide | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Carbide | Alloy HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | - | High-speed steel | Vanadium High-Speed Steel | Alloy HSS | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | High-speed steel | High-speed steel | High-speed steel |
Tap Type | Hand Tap | Point tap | Die | Hand Tap | Hand Tap | Hand Tap | Point tap | Point tap | Point tap | Die | Point tap | Point tap | Point tap | Spiral Tap | Thread cutter | Spiral Tap | Point tap | Spiral Tap | Roll tap | Spiral Tap | - | Point tap | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Point tap | Point tap | Point tap | Roll tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Hand Tap | Roll tap | Roll tap | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Roll tap |
Hole type | For blind hole | For through hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole / For blind hole | - | For through hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | - | For blind hole | - | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | - | - | For blind hole | For through hole / For blind hole |
Chamfer threads (Lcf) | - | 5P | - | 1.5P ~ 3P | 3P | 2P ~ 5P | 5P | 5P | 5P | - | 5P | 6P | - | 2.5P | - | 1.5P ~ 2.5P | 5P | 2.5P | 1P ~ 2P | 2.5P | - | 5 | 2.5P | 2.5P | 2P ~ 4P | 2.5P | 1.5P | 1.5P ~ 5P | 1.5P ~ 3P | 6P | 5P | 5P | 2P ~ 4P | 2.5P | 2.5 | 1.5 | - | 1.5P ~ 3P | 2P ~ 4P | 8P | 2.5P | - | - | 2.5P | 2P ~ 4P |
Coating Type | - | Other | - | TiCN | TiCN | Non-Coated | Non-Coated | - | TiAlN | Non-Coated | TiN | TiN | TiN | - | TiAlN | TiN | - | Other | TiCN | - | - | Non-Coated | - | - | - | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | - | - | - | Other | - | TiCN | TiCN | - | - | TiN | - | TiN |
Coating Y/N | NA | Available | NA | Available | Available | NA | NA | NA | Available | NA | Available | Available | Available | NA | Available | Available | NA | Available | Available | NA | - | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | - | NA | Available | Available | - | - | Available | NA | Available |
Overall Length (L)(mm) | 62 | 100 ~ 200 | - | 62 | 62 | 62 | 100 ~ 200 | 62 | 62 | - | 62 | 62 | 62 | 62 | 57 ~ 60 | 62 ~ 100 | 62 | 62 | 62 | 100 ~ 200 | 62 | 62 | 62 | 62 | 62 | 62 | 62 | 100 ~ 300 | 62 | 62 | 62 | 100 | 100 ~ 150 | 62 | 65 | 62 | 80 | 62 | 100 ~ 150 | 62 | 62 | - | 62 | 62 ~ 70 | 62 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy