(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
88 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.
From: 956,798 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
From: 160,050 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
From: 160,688 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
From: 138,576 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Hard-to-Machine Materials_EH-HT
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
From: 198,660 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
From: 201,960 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.
From: 146,192 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D
YAMAWA MFG
Solid die for difficult-to-cut materials, such as stainless steel, etc.[Features]· Adopts high-speed tool steel (HSS).· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.· Stable male threading can be performed.· Solid type with minimal variation even under harsh cutting condition specifications.[Applications]· Optimal for machining stainless steel and other difficult-to-cut materials.
From: 1,228,818 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.
From: 158,478 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.
From: 791,647 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
From: 220,719 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
From: 252,983 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
From: 154,793 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
From: 384,783 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
From: 464,061 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 5 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
From: 255,096 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
From: 224,063 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 5 Day(s) |
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
From: 2,407,060 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 5 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
From: 428,848 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Thermosetting_PL1
YAMAWA MFG
Especially suitable for thermosetting resins where tapping is more difficult than other synthetic resins.
From: 357,575 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Nickel Base Alloys_ZEN-P
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
From: 458,371 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
From: 200,640 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
From: 608,750 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for General Purpose_IPO
YAMAWA MFG
[Features]· Through-hole tap for low speed machining with a drilling machine.· Use for machining iron products (SPC, SS400, etc.) that are commonly available.· Has a surface treatment (oxide treated) that is ideal for machining iron.· Machines small amounts of female threads for product prototypes.· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.
From: 209,358 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T
YAMAWA MFG
[Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.
From: 494,828 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Fluted Taps
YAMAWA MFG
From: 576,633 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Through Hole Use(with LH Spiral Flutes)_SU+SL
YAMAWA MFG
A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.[Features]· Achieves a tool life triple or more that of SU-PO for SUS304.· Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.· By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
From: 277,356 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
From: 393,122 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
Point taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.· This prevents parts welding together and improves the finished surface roughness of the female thread.· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
From: 154,793 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
From: 653,993 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
From: 236,653 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
From: 274,306 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T
YAMAWA MFG
Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.
From: 464,360 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
From: 2,224,711 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.[Features]· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.· Screw precision in accordance with class 1b.· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.[Applications]Ideal for machining female threads for inserting insert coils after threading.
From: 344,825 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).
From: 288,643 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum 1.5P_AL-SP-1.5P
YAMAWA MFG
[Features]· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.
From: 326,973 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Pointed Taps
YAMAWA MFG
From: 576,633 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for longitudinal machining.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
Product SeriesDòng sản phẩm | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T | Spiral Fluted Taps for Stainless Steels, Through Hole Use(with LH Spiral Flutes)_SU+SL | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP | |||||||||||||||||||||||||||||||||
From | 956,798 VND | 160,050 VND- | 160,688 VND | 138,576 VND- | 198,660 VND- | 201,960 VND- | 146,192 VND Special Price On Sale Till 31/05/2024 | 1,228,818 VND- | 158,478 VND Special Price On Sale Till 31/05/2024 | 791,647 VND- | 220,719 VND- | 252,983 VND | 154,793 VND- | 384,783 VND- | 464,061 VND Special Price On Sale Till 31/05/2024 | 255,096 VND | 224,063 VND Special Price On Sale Till 31/05/2024 | 2,407,060 VND Special Price On Sale Till 31/05/2024 | 428,848 VND- | 357,575 VND | 458,371 VND | 200,640 VND- | 608,750 VND | 209,358 VND | 494,828 VND | 576,633 VND- | 679,270 VND | 277,356 VND | 393,122 VND- | 154,793 VND- | 653,993 VND | 236,653 VND | 274,306 VND- | 464,360 VND | 2,224,711 VND- | 344,825 VND | 288,643 VND | 326,973 VND | 576,633 VND- | 679,270 VND | 679,270 VND | 679,270 VND | 679,270 VND | 679,270 VND | 679,270 VND |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 10 Day(s) | Same day or more | Same day or more | 9 Day(s) | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day | Same day or more | 6 Day(s) or more | 5 Day(s) | 6 Day(s) or more | 5 Day(s) | 5 Day(s) | 9 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Screw size (Nominal) | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 | M6 |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 1 | 0.5 ~ 1 | 1 | 0.75 ~ 1 | 1 | 1 | 0.75 ~ 1 | 0.5 ~ 1 | 0.75 ~ 1 | 0.5 ~ 1 | 0.75 ~ 1 | 1 | 0.5 ~ 1 | 1 | 1 | 1 | 1 | 1 | 0.5 ~ 0.75 | 1 | 1 | 1 | 1 | 1 | 1 | - | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.5 ~ 1 | 1 | 1 | 1 | - | 1 | 1 | 1 | 1 | 1 | 1 |
Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
Tap Type | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Roll tap | Point tap | Die | Spiral Tap | Die | Hand Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Hand Tap | Point tap | Spiral Tap | Roll tap | Point tap | Thread-cutting-related tool | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Thread-cutting-related tool | Hand Tap | Hand Tap | Hand Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
Hole type | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For blind hole | - | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole |
Chamfer threads (Lcf) | 5P | 2.5P | 2.5P | 1.5P ~ 5P | 2.5P ~ 5P | 2P ~ 4P | 5P | - | 2.5P | - | 1.5P ~ 4P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 1.5P ~ 5P | 3P | 4.5P | 2.5P | 2P ~ 4P | 5P | - | - | 5P | 5P | 2P ~ 4P | 5P | 2.5P | 2.5P | 2.5P | - | 1.5P ~ 3P | 1.5P ~ 5P | 1.5P ~ 5P | 1.5P | - | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P |
Coating Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | TiN | - | - | TiAlN | - | - | - | - | TiCN | Other | Non-Coated | Other | TiCN | - | TiN | - | TiN | - | - | - | - | Non-Coated | Nitriding Treatment | Nitriding Treatment | Other | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN |
Coating Y/N | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | Available | Available | NA | - | Available | NA | Available | NA | Available | NA | NA | NA | NA | - | Available | Available | - | Available | Available | Available | Available | Available | Available |
Overall Length (L)(mm) | 100 | 55 ~ 62 | 62 | 62 | 62 | 62 | 62 | - | 62 | - | 62 | 62 | 62 | 100 ~ 200 | 62 | 62 | 62 | 62 | 62 | 62 | 62 | 62 ~ 70 | 62 | 62 | 61.5 | 80 | 62 | 62 | 62 | 62 | 62 | 62 | 62 | 61.5 | 55 ~ 62 | 70 | 62 | 62 | 80 | 62 | 62 | 62 | 62 | 62 | 62 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy